double used for sale

Double miter saw Manufacturer: Düspohl Model: DGK 400 B Built: 2000 Cutting width: 100mm Cutting height: 100mm Saw aggregates Swivel: -45° - + 45°

Rexroth double pump for Battenfeld injection moulding machine SY2DFE1-2X/100-100 MNR: R901016480

Dough kneading machine W&P DK 250 with 2 boilers -Double cone kneader type DK 250 -for max. 400 kg dough or 250 kg flour -with base plate

Service station - Hoftankstelle - Diesel filling station with 5,000 litres capacity, brand new, according to DIN 6616/D, above ground, double-walled, incl. test certificate. The container has two saddle feet, a manhole with dome lid and is fitted with the following fittings Equipped: 1 filling tube with TW-cap (filling cap) and immersion pipe, 1 bearing pipe with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand-new limit sensor with type-approval (AIII), 1 conductor and 1 spare sleeve for extraction purposes, 1 optical leak detector with type approval and leakage liquid. The container is primed on the outside - on untreated sheets. L = approx. 2.80 m - D = 1.60 m - weight approx. 1.5 to. - ex works, freely charged - We recommend: Above containers sandblasting from the outside, prime and completely repaint - dark grey / RAL hue.  ...

Double pump for Battenfeld SYDFEE-20/140R MNR: R900730346 SYDFEE-20/045R MNR: R900703325

Compressed air-operated double diaphragm pump of the EXP Bfkqxxxa38 Series Max flow rate 220.6 l/min Max air input pressure 8.3 bar Max material input pressure 0.69 bar Max compression pressure 8.3 bar Max particle size 3.2 mm 2 pieces available - as good as new

Double head corner cutter Krause Model Y12RM Year 1975 Knife included 7 mm upper + lower knife (other on request) Stack height 100 mm Minimum cut 65 mm between the heads Maximum cut 420 mm between the heads Speed up to 80 cycles per minute With footswitch, manual clutch release for set-up, with automatic push side lay, NEW electronic components and wires ! Available direct

Double spindle cutter, speeds 3000/4000/6000/8000/10000 rpm , Spindle stroke: 150 mm, spindle diameter 30 mm. Two pcs. Once of it with a feed. In the sales order.

Double-shaft sword scrubbers for cleaning aggregates; Motor rewinded, restocked;

Double miter saw Rapid for aluminium and plastic profile rod material or wood Machine No. 344 2 swivel saw blades, adjustable between 45 and 90° Motor 3.5 kW each Cutting length 3000 mm smallest cutting length 220 mm Workpiece width maximum 130 mm Saw blade diameter 420 mm pneumatic pressure cylinders each 1 piece from the front 1 pneumatic pressure cylinder from above Working length adjustable automatically or Fine adjustment manually via handwheel Weight 1,400 kg

Two-shaft shredder KS 1000/2 INDIVIDUAL - ADAPTABLE - ON YOUR RIGHTS Product information The 2-wave shredder KS 1000/2 is a powerful shredder that has a completely mechanically machined, solid grinding chamber. It is composed of 4 parts which are completely plugged into each other and screwed together, this gives an enormous stability and is very maintenance-friendly. The machine is powered by 2 high-performance electric motors that drive hexwaves running against each other via high-quality and robust planetary gearboxes 2. The hexagonal shafts can be equipped with individually made cutting discs of different thicknesses. The grinding chamber of the KS 1000/2 is double protected by wear plates and wear rings and is therefore completely armoured against wear. specifications: -Cutting room: 1000×600 -Drive: 2x15kW -Speed per shaft: 16.5 rpm -Advantage: Constant torq ...

For heavy or tähe products, Trough size 840 x 520 x 450mm deep, Full capacity 160L, usable capacity approx. 100-120kg per product, Stainless steel clad, double-walled for heating/cooling, Mixed elements of normal steel, side walls of normal steel, with stainless steel lid with counterweights and limit switch, converted to pneumatic tilting, with control cabinet, and built-in timer: 1 to 7 minutes. Dimensions: 2.2 x 1.2 x 1.4m high (with control cabinet 1.9m high) Weight approx. 1.200kg

Double paddle mixer,stainless steel,standing on wheel rack,with control panel.

Double labelling machine,Eurokett,prepared for oval packaging.

Double labelling machine,Avery type ALS-10/ALX 910

Double labelling machine,Collomat 70 with conveyor W 100 x L 1950 mm

Double conveyor,stainless steel,with rolls,L 1600 x W 150 x H 880 mm.

Double planet mixer,stainless steel,Telavox,Ø 100 mm

Double cone mixer,stainless steel,gearmotor

Automatic labeling and weighing train from the German manufacturer BIZERBA model GV. Automatic labeling and weighing system for packaged products in the food area. Superior double labeling. Industrial equipment. Electrical power: Voltage 220 V, Frequency 50 Hz Current 2.4 A. Maximum package dimensions: 300 mm wide x 540 mm long x 240 mm high External dimensions of the machine: (mm) 3100 long x 720 wide x 1700 high. Thermal printhead - 8, 0 dot resolution Memory: 2 MB Weighing from 1gr to 6000gr. Maximum labeling capacity 60 packs/minute. The equipment reviewed, rebuilt and guaranteed with the following maintenance performed: change of conveyor belts, thermal print head and motor belts.  High quality equipment and great performance in terms of speed and reliability.

LIQUIDATION of Double hood vacuum machine from the German manufacturer of high quality KRAMER GREBE, model QUICK AUTOMATIC. Its condition is of occasion equipment totally revised in its entirety (re-release) guaranteed. Built in stainless steel and aluminum. The machine is ready to plug in and work with. Busch empty pump: 63m3. Final pressure: 0.5 mbar Vacuum system: per sensor External measurements of the machine: 1000 mm long x 800 mm wide x 950 mm maximum height down lid, 850 mm working height. Camera dimensions: 430mm x 470 mm x 160 mm high. Welding bar measurements: 430 mm x 2. Weight: 175 Kg. Voltage: 380 V, 3 Ph, 50 Hz, Vacuum machine, vacuum hood, vacuum packaging machine, vacuum hood machine, meat machinery, packaging machinery. Equipment fully revised, conditioned and guaranteed. RE-RELEASE, OCCASION. NEGOTIABLE PRICE. Transport costs on behalf of the buye ...

mytron 160 K CO2 Double Incubator The CO2 Incubator 160 / 160K provides the "in vitro" growing cell and tissue cultures with environmental conditions that are very close to the physiological values of the organism. Interior volume: approx. 160 l Weight: 70 kg Recirculating air circulation: by fan Cooling: Cooling unit Temperature display: Setpoint and actual value display Temperature range: 5 °C above room temperature to 70 °C Temperature range (cooled): +15°C to 70°C at 23°C ambient Temperature constancy: +/- 0.2 K temporal Humidity display: setpoint and actual value display Humidity range: >/=95 % Moisture resistance: +/- 2.5 % CO2 display: setpoint and actual value display CO2 range: 0% to 20% CO2 CO2 constancy: +/- 0.2 % CO2 CO2 recovery time: 1% CO2/min Power supply: 230 V, 50 Hz, 2 x 8 AT WxHxD= 130x85x70 cm More items new and used - you can find them i ...

mytron 160 K CO2 Double Incubator The CO2 Incubator 160 / 160K provides the "in vitro" growing cell and tissue cultures with environmental conditions that are very close to the physiological values of the organism. Interior volume: approx. 160 l Weight: 70 kg Recirculating air circulation: by fan Cooling: Cooling unit Temperature display: Setpoint and actual value display Temperature range: 5 °C above room temperature to 70 °C Temperature range (cooled): +15°C to 70°C at 23°C ambient Temperature constancy: +/- 0.2 K temporal Humidity display: setpoint and actual value display Humidity range: >/=95 % Moisture resistance: +/- 2.5 % CO2 display: setpoint and actual value display CO2 range: 0% to 20% CO2 CO2 constancy: +/- 0.2 % CO2 CO2 recovery time: 1% CO2/min Power supply: 230 V, 50 Hz, 2 x 8 AT WxHxD= 130x85x70 cm Buy incubators and other products at low pric ...

Litz LH630B Double Table Horizontal Machining Center Machine is in very good condition

Double pump for Krauss Maffei machines Voith Rexroth control pumps 3-fold SY2DFE1-21/071-071 KM No. 6441936 MNR: R900751978

Mikrosan MCV 67/22D Double Screw Extruder Parallel screw New shaft sleeve New technology screen Machine is in very good condition

Double sided sander Stähle Saturn Duo Comfort Technical data Electrical power:11-14 kW (with brushing unit) - sanding motors 2x4,2x5,5 or 2x6,6 kW Compressed air: 8 bar, 400 to 500 l/min Sanding belt speed: 25m/sec Dimensions: Length: 1740 mm Width: 1070 mm or 1270 mm (with cross-cut) Working height: 825mm Workpiece dimensions: Thickness: 10mm min - 150mm max Width: 10mm min - 180-300 mm max Length: 290 mm min - unlimited Exhaust flanges: 2x80mm dia., 2x120 mm dia. (required air velocity 30m/sec at the flanges)

Double paddle mixer,stainless steel,standing on wheel rack,with control panel.

Double grinding machine metal Grinding wheels D=300mm W=40mm 400V 50HZ G&-4928-M3XQX

NuAire NU-8700 CO2 Double Chamber Incubator • Two independently controlled chambers  • Precise temperature stability and precise CO2 and humidity controls  • 100% stainless steel chamber construction • Water jacket with large capacity 75.7 liters • Contacts for remote alarm output • Easy-to-maintain sterile environment with HEPA filtration  The NuAire NU8700 CO2 Dual Chamber Incubator features two precise temperature-controlled chambers with HEPA filtration  for the optimal storage of embryos, gametes and animal tissue.  The microcomputer-based control system independently monitors and controls the temperature,  humidity and CO2 levels in each chamber.  The large water jacket is an ideal heat sink for precise temperature control of +/- 0.2 °C at 37 °C.   The chamber temperature ranges are between 5 °C above ambient temperature and 55 °C.  CO2 can b ...

Table diameter: 6300 mm Turning diameter: 6550 mm Turning height: 5300 mm Motor power: 0 HP/kW Positions ATC: 0   Positions APC: 0   Make Kolomna 63 Type KY 564 Q1 Year 1993 Double column vertical borer kolomna 6300 vtl Centre height (mm) Table = 6.300 Center distance (mm) Swing = 6.550 Spindle bore Height = 5.300 Load = 160 Ton 4 axis DroTriple chip comnveyor West europe under power West european electric cabinet Weight 270 Ton

Very high-quality CNC – controlled under-table two-unit double miter precision circular sawing machine with schifter cutting device (heavy version - 3,500 kg dead weight) Brand new, immediately available from stock (subject to prior sale). For the precise and rational cutting of large and heavy profiles made of aluminium - non-ferrous metals - various plastics. The machine can be used both for single cutting - when cutting with two sawing units at the same time (smallest section length 450 mm / largest section length 5,000 mm) or in automatic mode – when used as single-unit circular saw machines, so that Section lengths from 5 mm to 15,000 mm and longer possible. Five CNC axes for the electronic rotation of the saw tables infinitely variable over the entire rotation range, the vertical inclination of the saw blades electronically infinitely variable bet ...

Very high-quality CNC – controlled two-unit double mitre precision circular sawing machine (heavy version - 2,500 kg dead weight) Brand new, immediately available from stock (subject to prior sale) For precise and rational cutting even of large and heavy profiles made of aluminium - non-ferrous metals - various plastics. The machine can be used both for single cutting - when cutting with two sawing units at the same time (smallest section length 370 mm / largest section length 6,000 mm) or in automatic mode – when used as single-unit circular saw machines, so that Section lengths from 5 mm to 15,000 mm and longer possible. Three CNC axes, electronic inclination of the saw units infinitely variable over the entire inclination range. SCHNEIDER® feed motors and electronic motor controllers. CNC control with Windows 10 operating system and 10.4" color di ...

Double jacked s/s mixer, inside dimensions: 860 mm x 460 mm x 500 mm, total dimensions: 1750 mm x 750 mm x 1650 mm.

Masbuga double fryer with 2 baskets, basket dimensions: 300 mm x 300 mm x 110 mm, total dimensions: 800 mm x 950 mm x 950 mm.

S/s tiltable double jacked tank with agitator, volume: 350 liter, dimensions: 1500 mm x 960 mm x 1900

EWAC double jacked s/s tank with agitator, volume: 316 liter, dimensions: 1300 mm x 1400 mm x 3800 mm.

EWAC double jacked s/s tank with agitator, volume: 316 liter, dimensions: 1300 mm x 1400 mm x 3800 mm.

Industrias AJA double jacked s/s tank with agitator, volume: 400 liter, dimensions: Ø 800 mm x 2200 mm.

Rusàn bottle labelling machine with double labeller, model: Etiquetadora Lineal SR-GOLD-2-200/50, serial number: 020279002, year of construction: 2002, 380 V, 3 Ph, 50 Hz, plastic belt, belt width: 90 mm, clearance: 115 mm x 310 mm, total dimensions: 2950 mm x 1330 mm x 2000 mm.

Equipped with: coolant system saw blades; double circular saw; pneumatic clamps; digital control and readout; supply conveyor; USB and RS232 interface; HSS 325x3x40 saw blade; separate 2 meter extra supply conveyor; PAY ATTENTION! The buyer is responsible for dismantling and moving out of this lot; No charging equipment available!

Double cold room made up of panels, with internal evaporator (motor external, not included). You are responsible for the dismantling of this lot. There are no tools available. The cooling pipe will be disconnected before the collection day.

Double-walled steel tank. Price is negotiable. Shipping possible. The sale is carried out on behalf of the customer. Prior sale and error excepted. The terms and conditions of Cleantec-MR apply.

Used double miter saw Int. Kind. Ref. m3322 Manufacturer: RAPID Type: DGS Both units can be swivelled by up to 45° YOC 1978 cutting length approx. 3 m Weight approx. 460 kg Transport dimensions approx. 3.80 m x 1.20 m x 1.30 m Item location: 58730 Fröndenberg/Ruhr The machine can be visited. We will be happy to send you further photos by e-mail. A forklift/crane for loading is available. Prior sale is reserved. It is possible to expertly examine the items for sale on site. Specific questions should be clarified in advance. The information, such as e.B. technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty / guarantee is excluded. The goods are sold ex location / warehouse, with transfer of risk to the buyer, this also applies to a shi ...

Aluminum Double Miter Saw Fabr. ELUMATEC Type DG 79Year of construction 1982Saw blade diameter: 380 mmSaw blade hole: 32 mmCutting length: 4500 mmSwivel range R + L: 15 ° 22.5 ° 30 ° 45 °Angle: 0 - 45 °Section range: sh. sectional diagramCompressed air connection: 7 barSaw blade speed: 3800 rpm.smallest cutting length: 500 mmDrive power: 2 x 3000 WWeight approx: 490 kgwithout controlused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CNC double miter saw make ELUMATEC type DG 104Machine -No: 25725 Year 1990Saw blade diameter: 420 mmSaw blade hole: 30 mmCutting length: 6000 mmSlope range: 45 + 90 °Saw blade speed: 2800 rpm.Section range: sh. diagramkl. Cutting length: 335 mmPower: 2 x 4000 WDimensions: 6050 x 1600 x 1450 mmWeight approx. 1520 kgWith- CNC control E 255used from an operating resolution, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CNC Double Miter Saw Fabr. ELUMATEC Type DG 104Machine -No: 25591 Year 1989Saw blade diameter: 420 mmSaw blade hole: 30 mmCutting length: 6000 mmSlope range: 45 + 90 °Saw blade speed: 2800 rpm.Section range: sh. diagramsmallest Cutting length: 335 mmPower: 2 x 4000 WDimensions: 6050 x 1600 x 1450 mmWeight approx. 1520 kgWith- Control E 200- Roller conveyorused from an operational resolution, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CNC Double Miter Saw Fabr. ELUMATEC Type DG 104Year of construction 1992Saw blade diameter: 420 mmSaw blade hole: 30 mmMax. Cutting length: 6000 mmminimum cutting length at 90º + 45º: 360 mmPivoting range inwards: 90º - 22,5ºInclination range inside: 90º - 45ºSaw blade speed: 2800 rpm.Section range: sh. diagramPower: 2 x 4.0 kWDimensions approx: 7500 x 1600 x 2200 mmWith- CNC control - screen -- separate control cabinetused in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Double miter saw make RAPID type DGLSeries 3737, make -No: 2748 built in 1978with drilling and milling machine type BFA series 1109, make -No: 301 built in 1978Sägeblattdrm. : 420 mmCutting length: 4500 mmSaw blades tiltable: 90 - 45 °Max. Cutting height: 150 mmDrive power sawing units: 2 x 3 kWDrive power drilling unit: 1.1 kW (2700 rpm)Motor longitudinal adjustment sawing units: 0.75 kWExternal dimensions L x W x H: 7000 x 1100 x 1700 mmfor olive drilling and lock boxWith- Programmable control MTH for length- 2 revolving extraction systems- Drilling unit BFA (for drilling and milling of handle and lock machining)used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best r ...

Double Miter Saw Make EISELE EMMEGI Type VISA -2 TU / 5Fabr. -No: 148402, built in 1988Saw blade diameter: 450 mmSection length min.:240 mmSection length max .: 5000 mmDrive power: 2 x 2.5 kWOutside dimensions approx. 6500 x 1400 x 1600 mmusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools