double used for sale

Poly-clip PDC 700 semi-automatic double-clipper, year of construction 2002, for fibrous, plastic, natural and collagen casings, calibres up to 115 mm, sits on a trolley, suitable for following clip sizes: S 735 / 740 / 744, air pressure: 4-6 bar, refurbished. The machine is immediately available and can be tested in Koblenz, Germany.

P2 - used 40 m³ / 40,000 litres steel tank, double walled, above ground or as underground tank, on 2 steel bases, in good condition. dimensions: diameter approx. 2.5 m (without base) length about 8.90 m height incl. base approximately 2.78 m base width approx. 0.90 m Stainless steel tank DIN6616 D, double-walled, inside plain steel, 2 steel bases. Former isopropanol tank / chemical tank. On request this tank can be refitted for ground installation with a bitumen coating on the outside. The container can be used as storage tank for water, manure, AHL, ASL, seeping juice, canola oil, nutritional oil, as rainwater cistern etc. Price upon request. Item location is 79098 Freiburg im Breisgau. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, feel free to ask us. It is not possible to update all our advertisements daily. Sinc ...

DESCRIPTION ITS twin-shaft shredders with low speed and high torque designed to guarantee high performance and maximum reliability in the shredding of tough or bulky materials. Their solid and sturdy construction surpasses any other shredder on the market. As previously said: Given the large size of the grinding chamber and the solid construction, they are particularly suitable for grinding bulky and tough products such as wooden pallets, cardboard cores, metal scraps of various kinds and sizes, stacks of paper / cardboard sheets and many other materials that are usually difficult to grind. APPLICATIONS Large rolled up carpet Cardboard cores Pile of cardboard sheets Metal scraps WORKING PRINCIPLE The material is fed through a loading hopper placed above the grinding chamber which contains two rotating hexagonal shafts, equipped with circular blades of prede-fined thickness w ...

Description: heavy double grinding buck (Leipzig Iron and Steel Works) with chip container Technical data Grinding wheel permeser 400 mm Operating voltage 380 volts Drive power 4 KW Weight approx. 340 kg Dimensions (LxWxH) 1100 x 1150 x 1120 mm

Ready exhibition machine built in 2016 Mercodor ZM 44 Cutting Chamber 500 x 380 mm knife 14 3 mm hook drive 7,5 kw

New machine 24 months warranty available from September 2023 - pre-orders possible! Advantages: + Double-arm mixer as a robust, ergonomic table model + higher hydration possible compared to the spiral mixer + Your doughs will last longer and stay fresh longer + depending on the type of dough, a TA of up to 200 is possible + excellent for pizza / bread doughs, as well as very sensitive doughs + mixes ingredients very gently into the dough + less dough heating than conventional spiral kneading machines + Stainless steel boiler and double-arm kneading tool + Kneading arms are dishwasher safe and can be removed quickly and without tools + transparent flour dust hood (soft-close) with automatic switch-off + simple, digital control + 10 kneading levels with timer and 5 speeds adjustable + very smooth-running motor, power transmission by belt drive Technical data (according ...

Double grinding buck Rema with cue equipment, large collecting tray, new condition. Grinding wheel diameter 300mm, 1.8kw Special price

Kragarmregal, double-sided, 4,16m height, 1.20m arms, 500kg per arm - NEW - : Price from location incl. loading! 1 shelf unit with 4 pcs 1.850.-EUR (net)! A Kragarm shelving system, hot-dip galvanized, consisting of: 4 shelves double-sided approx. 4.16m high, hot-dip galvanized IPE 160 / 80 with 2x3 each. Arms 1.20 m, 500kg load capacity per arm with verbatim approx. 1.30 m shelf divider approx. 4160mm high, hot-dip galvanized foot and arm depth 1200 mm with 3 hoes-adjustable shelf arms carrying ability at load centre 600 mm 500 kg per arm / 2250kg per stem with laengs and diagonal connectors e = 1300 mm for a shelf row with 4 stems approx. 4000 mm long with all screws and nuts, without bottom anchors. Other configurations (frame height, armrails, arm types, etc.) can be used! Please contact us! photos of an old shelf!; New

mytron 160 K CO2 Double Incubator The CO2 Incubator 160 / 160K provides the "in vitro" growing cell and tissue cultures with environmental conditions that are very close to the physiological values of the organism. Interior volume: approx. 160 l Weight: 70 kg Recirculating air circulation: by fan Cooling: Cooling unit Temperature display: Setpoint and actual value display Temperature range: 5 °C above room temperature to 70 °C Temperature range (cooled): +15°C to 70°C at 23°C ambient Temperature constancy: +/- 0.2 K temporal Humidity display: setpoint and actual value display Humidity range: >/=95 % Moisture resistance: +/- 2.5 % CO2 display: setpoint and actual value display CO2 range: 0% to 20% CO2 CO2 constancy: +/- 0.2 % CO2 CO2 recovery time: 1% CO2/min Power supply: 230 V, 50 Hz, 2 x 8 AT WxHxD= 130x85x70 cm More items new and used - you can find them i ...

Kragarmregal, double-sided, 3,50m height, 1,20m arms, 500kg per arm - NEW - : Price from location incl. loading! 1 shelving unit with 4 staenders 1.750.-EUR (net)! A Kragarm shelving system, hot-dip galvanized, consisting of: 4 double-sided shelves approx. 3.50m high, hot-dip galvanized IPE 160 / 80 with 2x3 each. Arms 1.20 m, 500kg load capacity per arm with verbatim approx. 1.30 m shelf divider approx. 3500mm high, hot-dip galvanized foot and arm depth 1200 mm with 3 hoes-adjustable shelf arms carrying ability at load centre 600 mm 500 kg per arm / 2250kg per staender with laengs and diagonal connectors e = 1300 mm for a shelf row with 4 stems approx. 4000 mm long with all screws and nuts, without bottom anchor s. Other configurations (frame height, armrails, arm types, etc.) can be used! Please contact us! photos of an old shelf!; New

Kragarmregal, double-sided, 3,50m height, 1,20m arms, 750kg per arm - NEW - : Price from location incl. loading! 1 shelf unit with 4 pcs 1.900.-EUR (net)! A Kragarm shelving system, hot-dip galvanized, consisting of: 4 shelves double-sided approx. 3.50m high, hot-dip galvanized IPE 160 / 100 with 2x3 each. Arms 1.20 m, 750kg load capacity per arm with verbatim approx. 1.30 m shelf divider approx. 3500mm high, hot-dip galvanized foot and arm depth 1200 mm with 3-adjustable helving armseached each carrying ability at load centre of gravity 600 mm 750 kg per arm / 2250kg per staender with laengs and diagonal connectors e = 1300 mm for a shelf row with 4 stems approx. 4000 mm long with all screws and nuts, without bottom anchors Other configurations (frame height, armrails, arm types, etc.) can be used! Please contact us!; New

Roll-up station 0422 year 1996; ready for operation

wire diameter: 3,0 - 5,5 mm nail length: 15 - 80 mm output: 150/300 St./min. -for steel pins-; very good

CNC double-staender coordinate drilling rig with deep drilling support Kolb KBN G 120 year 1984 / Converted to Heidenhain TNC 426 in 2006 table size 4250 x 2200 mm Table load 14 t Table laengsweg X 3000 mm Main Spindle crosspath Y 2180 mm deep drilling spindle crossing path A - 2000 mm spindle vertical path 500 mm Distance between the stems 2640 mm; spindle - table 100 - 1300 mm; spindle diameter 224 mm Spindle drive power 46 kW spindle speeds 14 - 1400 rpm spindle holder ISO 50 Drilling in steel ST60: 100 mm diameter; drill up to 300 mm; threaded cutting up to M 125 x 3; frard power 730 cm3r/min.; SECOND SUPPORT SUPPORT: spindle speeds at BTA and ELB drilling 315 - 3150 rpm high high pressure oil Offer number V(B)-5234; Very good

CNC Double column Coordinate Boring Machine with Deep Hole Drilling Support Kolb KBN G 120 Year of manufacture 1984 / Retrofitted with Heidenhain TNC 426 in 2006 Table size 4250 x 2200 mm Table load max. 14 t Table longitudinal travel X 3000 mm Main spindle cross travel Y 2180 mm Deep hole drilling support cross travel A - 2000 mm Spindle vertical travel Z 500 mm Distance between the columns 2640 mm; Spindle to table 100 - 1300 mm; Spindle diameter 224 mm Spindle drive motor rating 46 KW Spindle speeds 14 - 1400 rpm Spindle taper ISO 50 Drilling in steel ST60 : 100 mm diameter; Boring to 300 mm; Threading to M 125 x 3; Milling capacity 730 cm³/min.; Second support for Deep Hole Drilling Spindle speeds for BTA and ELB boring 315 - 3150 rpm High pressure cutting oil delivery to spindle Chip- and oil collection and separation via Centrifuge. Very good condition P ...

mytron 160 K CO2 Double Incubator The CO2 Incubator 160 / 160K provides the "in vitro" growing cell and tissue cultures with environmental conditions that are very close to the physiological values of the organism. Interior volume: approx. 160 l Weight: 70 kg Recirculating air circulation: by fan Cooling: Cooling unit Temperature display: Setpoint and actual value display Temperature range: 5 °C above room temperature to 70 °C Temperature range (cooled): +15°C to 70°C at 23°C ambient Temperature constancy: +/- 0.2 K temporal Humidity display: setpoint and actual value display Humidity range: >/=95 % Moisture resistance: +/- 2.5 % CO2 display: setpoint and actual value display CO2 range: 0% to 20% CO2 CO2 constancy: +/- 0.2 % CO2 CO2 recovery time: 1% CO2/min Power supply: 230 V, 50 Hz, 2 x 8 AT WxHxD= 130x85x70 cm Buy incubators and other products at low pric ...

Folding machine RAS 22.11 - see pictures, Stand fold / double-standing fold

automatic double mitre saw OMS SALVARANI INVINCIBILE OK 330 CE standard : Yes n.02 motors . power Hp 3 each one blades diam.mm.330 max. useful cutting length mm.3000 max. useful cutting width 90° mm. 165 max. useful cutting width 45° mm. 115 max. useful cutting heigth mm.115 volt. 380/50 weigth kgs.650

Cylindrical storage tank, factory new Capacity: 60 cbm / Medium: Fuel oil Material: S235JR (St 37.2) raw inside, blasted outside, primed and painted in RAL 7035 - light grey Dimensions: 2,500 mm diameter, 12,650 mm full length Design: according to DIN 6616/2 or DIN EN 12285-2, double-walled Test pressure inner tank 2 bar test overpressure Double jacket 0.6 bar incl. control fluid in double jacket for above-level storage with test certificate and documentation Container equipped with GOK Lag 2000 and limit sensor as overfill protection Equipment: 1 dome 600 mm li.W. with cover, gasket and screws 3'' filling cable with TW coupling 3'' Vent with cap 1 1/4'' Suction line with reduction to 1'' 1'' for limiter GWG 23-Ro 1'' nit dipstick 2'' reserve 1 pair of permanently welded steel saddle feet 1 suspension ladder with pedestal, galvanized according to UVV  ...

Working range: tube Ø 21,3 – 114,3 mm Wall thickness 2,3 - 11 mm Length: 6-12m Composed of two RFA14 chamfering machines with transport devices between the machines. The task of machines is to chamfer inside and outside both ends of the tubes. The range of diameters of chamfered tubes 21.3-114,3mm and wall thickness of 2.3-11mm in the length range of 6-12m. The task of transport in the area of the chamfering machines is to collect the tubes from the roller table and move them between the chamfering machines. Machine is new, never used.

The machine has been overhauled in the workshop. It was repaired, defective parts were replaced and functionally tested . The spindle bearing has been renewed, the rotary table drive has been overhauled Specifications Vertical grinding spindle assembly Workpiece diameter up to 30 mm Max. workpiece height 10/20 mm Grinding wheel diameter 300 mm Grinding wheel rotation speed 35 m/s Workpiece feed 1.5 to 15 m/min Drive power grinding wheel motor 2 x 22 kW Total drive cable approx. 50 kW Machine weight approx. 4.5 t Total space requirement approx. L x W x H 3.3 x 2.6 x 2.6 m The DISKUS DDS 300 RPD has been completely dismantled, cleaned, assembled and functionally tested. Spindle bearings and rotary table drive have been overhauled. Equipped by the manufacturer for grinding with CBN discs. The machine can be viewed by arra ...

Collar shelving, double-sided, 5, 18 m high, 1, 20 m arms, 870 kg per arm - new -: Price from site including loading! 1 shelf unit with 4 stand EUR2.495.-(net)! A cantilever rack system, hot-dip galvanized, consisting of: 4 shelf stand double-sided measures 5.18 m, hot-dip galvanized IPE 180 / 100 with each 2 x 3 verstellb. Poor 1.20 m, 870 kg capacity per arm with associations about 1.30 m Shelf stand double-sided about 5180 mm high, hot-dip galvanized Foot and arm depth 1200 mm with 3 adjustable shelf arms Load capacity at load Centre 600 mm 870 kg each arm / 2610 kg per stand with longitudinal and diagonal associations e = 1300 mm When a shelf set with 4 stands approx. 4000 mm long with all bolts and nuts, without ground anchor. Other configurations (frame height, arm length, arm types etc.) can be selected. Please speak to us! Photos of a similar rack!

Collar shelving, double-sided, 5, 18 m high, 1, 20 m arms, 500 kg per arm - new -: Price from site including loading! 1 shelf unit with 4 stand EUR2.295.-(net)! A cantilever rack system, hot-dip galvanized, consisting of: 4 shelf stand double-sided measures 5.18 m, hot-dip galvanized IPE 180 / 80 with each 2 x 3 verstellb. Poor 1.20 m, 500 kg load capacity per arm with associations about 1.30 m Shelf stand double-sided about 5180 mm high, hot-dip galvanized Foot and arm depth 1200 mm with 3 adjustable shelf arms Load capacity at load Centre 600 mm 500 kg each arm / 2610 kg per stand with longitudinal and diagonal associations e = 1300 mm When a shelf set with 4 stands approx. 4000 mm long with all bolts and nuts, without ground anchor. Other configurations (frame height, arm length, arm types etc.) can be selected. Please speak to us! Photos of a similar rack!

Collar shelving, double-sided, 4, 16 m high, 1, 20 m arms, 500 kg per arm - new -: Price from site including loading! 1 shelf unit with 4 stand EUR1.850.-(net)! A cantilever rack system, hot-dip galvanized, consisting of: 4 shelf stand double-sided about 4, 16 m high, hot-dip galvanized IPE 160 / 80 with each 2 x 3 verstellb. Poor 1.20 m, 500kg load capacity per arm with associations about 1.30 m Shelf stand double-sided about 4160 mm high, hot-dip galvanized Foot and arm depth 1200 mm with 3 adjustable shelf arms Load capacity at load Centre 600 mm 500 kg each arm / 2250 kg per stand with longitudinal and diagonal associations e = 1300 mm When a shelf set with 4 stands approx. 4000 mm long with all bolts and nuts, without ground anchor. Other configurations (frame height, arm length, arm types etc.) can be selected. Please speak to us! Photos of a similar rack!

Collar shelving, double-sided, 3, 50 m height, 1, 20 m arms, 500 kg per arm - new -: Price from site including loading! 1 shelf unit with 4 stand EUR1.750.-(net)! A cantilever rack system, hot-dip galvanized, consisting of: 4 shelf stand double-sided 3, 50 m high, hot-dip galvanized IPE 160 / 80 with each 2 x 3 verstellb. Poor 1.20 m, 500kg load capacity per arm with associations about 1.30 m Shelf stand double-sided approx. 3500 mm high, hot-dip galvanized Foot and arm depth 1200 mm with 3 adjustable shelf arms Load capacity at load Centre 600 mm 500 kg each arm / 2250 kg per stand with longitudinal and diagonal associations e = 1300 mm When a shelf set with 4 stands approx. 4000 mm long with all bolts and nuts, without ground anchor. Other configurations (frame height, arm length, arm types etc.) can be selected. Please speak to us! Photos of a similar rack!

Collar shelving, double-sided, 3, 50 m height, low-1, 20 m, 750 kg per arm - new -: Price from site including loading! 1 shelf unit with 4 stand EUR1.900.-(net)! A cantilever rack system, hot-dip galvanized, consisting of: 4 shelf stand double-sided 3, 50 m high, hot-dip galvanized IPE 160 / 100 with each 2 x 3 verstellb. Poor 1.20 m, 750kg load capacity per arm with associations about 1.30 m Shelf stand double-sided approx. 3500 mm high, hot-dip galvanized Foot and arm depth 1200 mm with 3 adjustable shelf arms Load capacity at load Centre 600 mm 750 kg each arm / 2250 kg per stand with longitudinal and diagonal associations e = 1300 mm When a shelf set with 4 stands approx. 4000 mm long with all bolts and nuts, without ground anchor. Other configurations (frame height, arm length, arm types etc.) can be selected. Please speak to us!

Double grinding machine TS 300 SD P with SUCTION, machine stand, emergency stop push button and brake smooth-running, maintenance-free motor Protective covers closed at the sides Stable, adjustable workpiece supports High level of safety comfort thanks to adjustable spark deflectors suitable for grinding, deburring and sharpening tools of all kinds, metal profiles, etc. Motor Circuit Breakers and Undervoltage Trippers Double-sided spark/eye protection connection cable with CEE plug 16 A 1 grinding wheel each coarse and fine 12 months warranty for single-shift operation - Grinding wheel (mm): 300 x 40 x 51 - Machine dimensions without packaging (mm): 540 x 530 x 1,180 mm 230 - Speed (1/min): 1250 - Three-phase motor 400 V / 2.2 kW: operating mode S2-30 min (short-term operation) - Extraction motor 0.55 kW, suction power 350m³/h - Weight (kg): 90 Shipping time:immedia ...

P108 - used approx. 40 m³ / 40,000 litres polyester tank / GRP tank, double-skinned, flat bottom tank, Speidel tank, including as new ullage device(approx. one year). Manufacturer Speidel, aboveground storage tank, vertically standing on flat bottom, in good condition. volume: approx. 40 m / 40,000 litres material: polyester / GRP diameter: approx. 3.00 m height: approx. 6.50 m year of construction: 2001 Double-skinned, for media with a specific weight of up to 1.4 kg / litre. The container can be used as a storage tank for many different media. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us  ...

Many thanks for your interest on our second hand machines, please find follow our offer: manufacturer: Werner & Pfleiderer Type: Double Z Kneader UK11 with hand tilting imensions pot: 400x400x330mm (lxbxh) Utilizable contents: ca. 40 l Gesamt / 30kg Teig imensions: 1700x1300x1650mm (l/w/h) Weight: ca. 530 kg different: - hand tilting - standard steel construction We offer this machine in 'as is' condition, without warranty, ex warehouse (Incoterms EXW and without packaging. ex Warehouse Hess. Lichtenau, (EXW)unpacked

Double grinding machine TS 200 SD P with SUCTION, machine stand, emergency stop push button and brake smooth-running, maintenance-free motor Protective covers closed at the sides Stable, adjustable workpiece supports High level of safety comfort thanks to adjustable spark deflectors suitable for grinding, deburring and sharpening tools of all kinds, metal profiles, etc. Motor Circuit Breakers and Undervoltage Trippers Double-sided spark/eye protection connection cable with CEE plug 16 A 1 grinding wheel each coarse and fine 12 months warranty for single-shift operation - Suction nozzle Ø (mm): 42 - Grinding wheel (mm): 200 x 32 x 32 - Machine dimension without packaging (mm): 250 x 470 230 - Speed (1/min): 2550 - Three-phase motor 400 V (kW)1: Operating mode S2-30 min (short-term operation) - Weight (kg): 60 Shipping time:immediately, from stock

Many thanks for your interest on our second hand machines, please find follow our offer: manufacturer: Werner & Pfleiderer Type: UK 14 ½ Doppel-Z – Kneter Utilizable contents: approx. 350 l Weight: approx. 2.800 kg different: - machine need New painting, mechanical and electrical contoling before work - product touching parts in stainless steel - double jacked for heating - motorized tilting about the front axle with tilt motor - Working hours approx 2947 (read from counter) We offer this machine in 'as is' condition, without warranty, ex warehouse (Incoterms EXW and without packaging. EXW - ex Warehouse Hess. Lichtenau, unpacked

Double swivel crane Saleg swivel crane Zasche GSX 2x500-4,5 Complete Saeule + 2x swivel arm + 2x chain hoist Crane hook height 3.5m / swivel arm length 4m Saeule with 2 swivel arm holders each 500kg load capacity Stroke designation RUDK / ub speed 4 m/min Total usage 611 hours / usage reserve 988 hours

GS14 - used approx. 100 m³ / 100,000 litres double-walled steel tank, heating oil tank, firefighting water tank, water cistern. In good condition, aboveground tank on two mounted steel consoles, storage tank, water tank, former oil tank, steel tank painted in green. capacity: approx. 100 m³ / 100,000 litres material: steel tank, double-walled, DIN6616/2 dimensions: Ø 2.9 m x approx. 15.8 m long weight: approx. 17.0 t manufacturer: Kraemer Apparatebau other: 2 entry shafts Upon request the tank can be repainted for additional charge. The container is used, has been emptied and professionally cleaned inside. According to the age there are traces of use. This steel tank / container can be used as a storage tank for many different media. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask u ...

all stainless steel capacity 300 L. (= ± 10CF) Double Ribbon mixing arm Dimensions: (l x w x h) : ± 1.900 x 670 x 1.740 mm (open lid : ± 2.140 mm) outfeed height : ± 720 + 20 mm safety lid CE-approved 2 speeds: 16 en 32 rpm 2 mixing directions 5,5 kW Digital – touch screen with programs Perfectly suitable for dry products, such as: herbs, ingredients, powders,…

New machine 24 months warranty Advantages: + Double-arm kneader as a robust, mobile model with swivel wheels + higher hydration possible compared to spiral kneader + Your doughs will last longer and stay fresh for longer + depending on the type of dough, a TA of up to 200 is possible + excellent for pizza / bread doughs, as well as very sensitive doughs + mixes ingredients very carefully into the dough + less dough heating than with conventional spiral kneading machines + Kettle and double-arm kneading tool made of stainless steel + Kneading arms are dishwasher safe and can be removed quickly and without tools + transparent flour dust hood (soft-close) with automatic switch-off + simple, digital control + 10 kneading levels with timer and 5 speeds adjustable + very smooth running motor, power transmission by belt drive Technical data (according to manufacturer's speci ...

ID3344 Double roller crusher year/Baujahr 2015 230 t Double roller crusher including conveyor belt 1600 mm x 12.2 m, including 2x discharge belt (Mobcon) 1400 mm x 40 m, including transfer station approx. 1.8 m x 1.8 m, feed hopper length = 4.5 m, width = 6 m, content approx. 30 cbm, apron conveyor with crawler chain, apron conveyor width 1800 mm, apron conveyor length approx. 9.5 m, cleaning conveyor belt 2000 mm x 5.3 m, including electrical equipment and control Double roll crusher incl. conveyor belt 1600 mm x 12.2 m, incl. 2x discharge belt (Mobcon) 1400 mm x 40 m, incl. transfer station approx. 1.8 m x 1.8 m, feed hopper length = 4.5 m, width = 6 m, capacity approx. 30 cbm, apron conveyor with crawler track, plate belt width 1800 mm, plate belt length approx. 9.5 m, cleaning conveyor belt 2000 mm x 5.3 m, incl. electrical equipment and control system

S5 - used 50m³ / 50,000 litres steel tank, double-walled, underground tank, firefighting water tank, water cistern. In good condition, underground or aboveground tank, steel storage tank, water reservoir. Surface coated with bitumen insulation / bitumen painting. capacity: approx. 50m³ / 50,000 litres material: steel tank / underground tank, double-walled manufacturer: Mannesmann dimensions: approx. Ø 2.5m x 10.0m long weight: approx. 8.0 - 10.0 tons The steel tank is used, has been emptied and professionally cleaned inside. According to the age there are traces of use. This container can serve as a storage tank for water, waste water, sewage, manure, seeping juice, rapeseed oil, or as rainwater collection tank, water cistern, firefighting water tank etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your dem ...

EiMa double cross-cut saw DKS 123 and accessories, built in 2010, very good condition (has been regularly serviced). New price at that time - approx. € 55,000.00 saw, € 15,000.00 accessories Specifications: Manufacturer: EiMa Maschinenbau GmbH, Frickenhausen Type: GKS 123 Type of current: 230/ 400V / 50 Hz Operating voltage: 400 V Control voltage: DC 24V Machine power: 23 kW Rated current: 44 A Dimensions approx. Length: 6.40 meters Width: 5.37 meters Height: 1.10 meters Weight: 2.2 tons The accessories consist of the photos, various replacement profile cutter heads (partly from Leitz-Variform and as good as new in original packaging) etc. The double deflection saw is currently still at our customer in Gerolstein and was taken out of service on 23.10.2024 - due to a restructuring. Only the offered machine and accessories are expressly sold, any things th ...

Manufacturer: Torwegge, Type: H634.1, Year: ca. 1996, Year :ca. 1996

S6 - used approx. 1.5 m³ / 1,500 litres steel tank on wooden skids, double-walled, in good condition. Storage container, water tank, firefighting water tank, diesel fuel tank, heating oil tank. capacity: approx. 1.5 m³ / 1,500 litres material: steel, double-walled diameter: approx. Ø 1.0 m length: approx. 2.1 m overall height: approx. 1.2 m incl. skids The steel tank is used, has been emptied and professionally cleaned inside. According to the age traces of use are present. This container can be used as a storage tank for many different media. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please ...

Double side labeler incl. round labelling function, built in year of 2019, capacity approx. 30-35 cycles / min. Label length 20-300 mm / label height 160 mm / container diameter 20-110 mm The price is EURO 24.500,--.

Doppelschleifbock, water cooled-Schleifscheibe max Ã? 350 x 50 mm (neuwerig) speed 1400 RPM engine power 1.8 KW 380 Volt L 1050 B 750 H 1250 mm - 79. weight 300 kg

Complete Zn drum system, double row, footprint 21 x 7 m, built-up operational condition any components NEW and unused (only test run with water) 11 stations zinc bath à approx. 0.8 m³ / wet turner / 19 static rinsing, pre-- post-treatment / loading - unloading Manufacturer: Fey Galvanotechnik, Solingen / year 2020 (individual components partly 2019) The system essentially consists of: ATB S7 control system in 12x Rittal cabinets, Simatic HMI Touch Tank park: 1x stainless steel tub (double E-def), 15x PP bathtubs (triple, double and single tubs) Drain ball valves, level bar probes, temperature sensors Immersion bath warmer: 20x double E-def, 16x single E-def, 12x zinc bath, 2x zinc electrolyte attachment, 9x (3x each) thick layer, blue, yellow; Rotkappe T-QS 630/1,25-230Ws, 1250W Oil separator (degreasing): Stainless steel Friess W20 31x drum units: filling volumes up to  ...

Used Flottweg B-800 double-belt press (PD6000). New: 2015 Technical data: Type: B-800 Hourly throughput [t/h]: 2-6 Belt width [mm]: 800 Drive power [kW]: 1.5 Electrical connection [V/A]: depending on the country of installation Pneumatic connection [bar]: 6 Design and operating principle: 1. The product is continuously fed into the feed box and evenly distributed on the lower belt. The height and width of the cakes can be adjusted to the specific product. 2. In the wedge zone, the upper belt is pressed against the product. A slow increase in pressure creates a stable product cake. 3. In the extrusion area, the cake is dewatered, first using a special profile roller, which ensures rapid liquid drainage to both sides of the cake. 4. The product is then effectively dewatered by pressure rollers with gradually decreasing diameters and increasing pressure. 5. Optional linea ...

Double-acting hydraulic cylinder, CK-80/56x0800-L004-H-B1X, Atos, new Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, Technical information: - Double-acting hydraulic cylinder with swivel eye - Specially manufactured for Frech/Weingarten die casting machines - Suitable for GDK 2000 to GDK 4100 machines - Frech item number 949390 - Piston diameter 80 mm, piston rod diameter 56 mm - Max. stroke 800 mm, piston rod thread M27 x 2 - Centre of swivel eye to retracted piston rod face 510 mm - Swivel eye d40 mm 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund th ...

Turning Diameter 400 mm Turning Lenght 650 mm With C ,Y axes and subspindle Control Unit Fanuc 31i Can be inspected under power

HELMA- model CF-40-copy milling/shaping machine feed thru with work piece return (2) milling spindles- 18" max. distance between the spindles centers- 28" x45" Table - (2) 30mm. work spindles- 10,500 RPM spindles- 4"max. cutting height - vertical adjustment 10 mm.- (2) 7 1/2 hp. spindle motors - 1/2hp. variable speed feed motor 5' to 30' per min.- 2,200 lbs. $7,500

Double bench grinder, double grinding machine, pedestal grinder, bench grinder, drill grinding machine -Grinding disc: max. Ø 200 x 30 mm -Speed: 2800 rpm -Motor power: 0.74 kW -Operating voltage: 380 volts

Double tool holder, double tool holder, double tool holder for turning tools -Size: 120 x 120 mm -Schuck holder: 33 x 49 mm -Bore: Ø 25 mm -Resses: Ø 80 mm -Weight: 5.9 kg

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Double grinding machine: Type ES200 PW -Grinding discs: max. Ø 230 mm -Motor: Power 0.55 kW -Speed: 2800 rpm -Voltage: 380 V -Dimensions: 510/320/H1230 mm -Weight: 54 kg