double used for sale

Clextral extruder, Type: Evolum EV032 M, Extruder: 40D, Barrel length: 10 x 128 mm, Stroke length: 1420 mm, Water: 4.5 - 5.5 Bar, Compressed air: 6 Bar, Steam injection: 2 - 6 Bar, Power: 3 x 400V, 50Hz, 83kW, Dimensions: 4475 x 1200 x 2100 mm, Weight: 1905 kg, Only 80 working hours!, Clextral water pump, Type: CLX DKM, Flow: 6 - 42 l/h, Pressure: max 10 Bar, Reservoir: 7.5 litre, Power: 0.55 kW, Dimensions: 1265 x 350 x 700 mm, Clextral / Prominent oil pump, Type: GMXA1604, Flow: 0.3 - 2.5 l/h, Pressure: max 10 Bar, Reservoir: 10 litre, Dimensions: 900 x 700 x 1150 mm, Clextral High Moisture Extrusion Cooking die, HMEC type: 2 x 800 mm length, Material: CLX202, Internal section: 60 x 8 mm, Dimensions: 1900 x 700 x 1200 mm, TLV steam kit, Type: 2/10 TLV, Serial number: SV148, Steam flow: 2 - 10 kg/h, Steam pressure: 6 - 10 Bar, Maximum pressure: 10 Bar, Steam inlet: DN15, PN16, Steam out ...

Calibre: 25 - 85 mm, Clips: E200 to E240, Stuffing horn: 28 mm, Compressed air: 6 Bar, 5.7 Nl, Power: 230VAC, 50Hz, 0.3kW, Dimensions: 1250 x 700 x 1800 mm, Weight: 100 kg

pressure: - t distance between columns: - mm stroke: - mm total power requirement: - kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Double softening system consisting of: - 2 GRP pressure vessels (Pentair) - 2 control heads (1 control head must be renewed) - 1 sole tank - Control unit MMP 81 (Gebrüder Heyl) - Piping with pneumatic diaphragm valves The plant is dismantled and stored in Warburg.

MODEL SL-150 Power t 150 Motor power kw 4 Piston stroke mm 250 Working speed mm/s 3.1 Return speed mm/s 4 Head displacement mm 1,000 Front light mm 1,500 Side light mm 340 Max. vertical span mm 955 Bed light mm 405 Total front mm 2,150 Total side mm 1.180 Total height mm 2.805 Weight kg 2.350 STANDARD DESCRIPTION: The S-series hydraulic presses are specially designed for extraction, casing and straightening work. They work with a hydraulic pressure of less than 320 bar, which guarantees greater durability of the entire hydraulic system. STRUCTURE: They consist of an electro-welded structure with four uprights with open sides. They are equipped with a movable bed that allows it to be positioned at different heights. The fixing is done by means of two pins located at the bottom of the bed. The raising and lowering system is carried out by means of cha ...

STANDARD FEATURES: Power 50 t Motor power 1.5 kw Working speed 2.25 mm/s Return speed 4.50 mm/s Maximum pressure 500 bar Piston stroke 150 mm Spindle stroke 120 mm Front light 800 mm Side light 160 mm Max. vertical span 1,020 mm Bed light 205 mm Total front 1,090mm Total side 900 mm Total height 2,000 mm Weight 295 Kg. Specially designed for extraction, bushing, straightening, etc. The hydraulic presses of the S series consist of a four-pillar electro-welded structure with open sides. They have a movable base that allows it to be positioned at different heights. The fixing is by means of two pins located at the bottom of the bed. The raising and lowering system is by means of chains driven by the cylinder of the press. SD Models: are fixed head. Double-acting cylinder with chrome-plated plunger and anti-wear guides. It is equipped with a removab ...

TJF-GARNET SPECIAL HYDRAULIC PRESS: Hydraulic press with double upright equipped with two side cylinders joined by a plate for the pre-pressing and pressing of rotors and stators, and a central cylinder for the extraction of the mandrel and stalling of the rotor shaft, as well as the extraction of shafts in case of repair. It has a removable table for the stacking and handling of rotors and stators. MAIN CYLINDERS 150 TN.  2 hydraulic cylinders of 75 Tn. of power each, with a stroke of 1200 mm joined by a grooved plate, with a central bore of 250 mm in diameter.  Maximum useful height cylinder plate of 1550 mm.  Minimum useful height cylinder plate of 350 mm. ABSTRACTION CYLINDER  1 central cylinder of 80 Tn of power with 1200 mm stroke.  Prepared to adapt abstraction clamp, end of threaded stem to M 35,150 x 40 in length.  Maximum useful height ...

Key data: 400 t

The following machines are involved: Müller-Weingarten ZE 400-16.19, 400 t double column press, approx. 1,600 × 1,300 × 1,400 mm, year of construction 1963, conversion 1991. Müller-Weingarten ZE 400-20.13.2, 400 t double column press, approx. 2,000 × 1,300 × 1,200 mm, year of construction 1977, conversion 1991.

Souffleuse éléctrique PLASTIBLOW type PB1E/D E60/25 Année : 2007 Diamètre vis extrudeuse : 60mm Rapport L/D vis : 25 Moules : 2 Course : 260 mm Force de fermeture : 35 T Capacité : 3L Puissance moteur extrudeuse : 30 KW Puissance chauffage extrudeuse : 9,6 KW Zones de chauffes : 4 Ventilateurs de refroidissement : 3 Capacité de plastification en PE : 58kg/h Capacité de plastification en BFPE : 75kg/h Heures de fonctionnement : 24 000 heures Double poste Double tete avec entraxe de 100mm. Tête modifiée par rapport à original en 2021 (3 têtes entraxe 85mm => 2 têtes entraxe 100)

Key data: 27 mm, 36 , 1200 U/min

Warehouse – No. 2875 1 used, in 2026 Partially overhauled and function-tested compounding granulation line, consisting of: Brabender grav. Dosage 2-components (expandable, optional vs. surcharge) with 1x FlexWall 40, 1x DDW-MD5, Congrav RC4 control stand-alone Extruder Twin Screw Leistritz Type ZSE 27 HP Synchronous, seal-combing, segmental screw and barrel with intensive cooling. Screws 2x Ø 27 mm- 36 L/D with 8 cylinder zones with 3x degassing zones, 1x vacuum pump 1.5 kW Screw speed up to 1,200 rpm.-1 – adjustable Extruder drive 33.8 kW - Heating capacity 9.8 kW installed Mass pressure sensor Control Macromatex III MAAG Gala Underwater Pelletizer Type LPU Model SLC 5, incl. Polymer start-up valve with hydraulics Perforated plate 20°, granulator SLC 5 with drive 1.5 kW Water Box - Temperate water system with Granule Centrifugal Dryer Type 1150, Driv ...

Asitrade / Bobst 1650 – Inline double-wall laminating line Year: 1995 / 2016–2018 Working width: 1,650 mm; double-wall configuration Flutes: E, B, F, C; operator side: left Asitrade components from 1995; Bobst additions from 2016–2018 Equipment: Asitrade single facer and Bobst Modul Facer MF 260 Roll stands and splicers; Spiess feeder for printed top sheets Asitrade litho laminator; Bobst Triplo J 13 second gluing station Bobst QBK cut-off and Copar system Pressure belt, flip-flop unit and non-stop high-pile delivery Reference: PP-51501 Further information on request.

Double end tenoner with two opposing machining sides on a common base. Equipped with chain feed tracks, upper hold-down assemblies, circular saw and milling units, extraction hoods and an adjustable machining side on transverse rails. Push-button controls with emergency stop. Celaschi documentation included. Auction-ID: A1-50699-36

Closes sausages and mortadella with a clip on both ends, The Serrano MH-640 is an automatic double clipping machine, originally designed for mortadella and other large sausage calibres. The filled casing is voided and clipped on two sides in one stroke, so one sausage is closed and the next already has its start., The machine sits on a stainless cabinet with castors, with an outfeed chute and roller conveyor for the product. It is pneumatically driven. We did not find a rating plate with the year., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/serrano-mh-640-automatic-double-clipper /, Type: Automatic double clipper, Application: Mortadella and large sausage calibres, Drive: Pneumatic, Outfeed: Chute and roller conveyor, Construction: Stainless cabinet on castors

The Thimonnier M3200 is an automatic double head vertical form / fill / seal machine (Vertical FFS) to pack liquid & viscous products in pillow pouches using rolls of polyethylene. Possible products are: pasteurized milk / water / fruit juices / curdled milk / liquid yoghurt / nectars / cream / greek yoghurt / kefir / smetana / rayeb / sauces / soups or syrups. The pouches are continuously filled from an over tank headed with constant level and controlled by a proportional valve and a level sensor.The machine is very flexible and reach high output and high dosing accuracy. Strong frame made from steel profiles covered with stainless plates for maximum rigidity. A Clean-in-Place (CIP) has been integrated into the M3200’s design. All of the parts that come into contact with the product are built from stainless steel. Rate of production: 5.000 - 8.000 pouches per hour. Bag volume: 70 - 1. ...

: neu : ca. 4 Monate ab Auftragse : Italien : 132500 € : 2504.25 € : 200 to : 500 mm : 1250x1000 mm : 600 mm : 25 mm/s : 3,5 mm/s : 7.5 kW : 1550 mm : 1300 mm : 2700 mm 4-pillar guide ram guide round table and ram with T-slots 2 hand operation Siemens PLC manometer users manual OPTIONS: Light barrier € on Request Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Decompression valve € on Request Oil cooler with decompreission valve € on Request Pressur switch € on Request The data for this ad was created with ...

: neu : ca. 4 Monate ab Auftragse : Italien : 172500 € : 3260.25 € : 300 to : 500 mm : 1250x1000 mm : 600 mm : 22 mm/s : 2 mm/s : 7.5 kW : 1750 mm : 1500 mm : 2800 mm 4-pillar guide ram guide round table and ram with T-slots 2 hand operation Siemens PLC manometer users manual OPTIONS: Light barrier € on Request Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Decompression valve € on Request Oil cooler with decompreission valve € on Request Pressur switch € on Request The data for this ad was created with M ...

: neu : ca. 4 Monate ab Auftragse : Italien : 63500 € : 1200.15 € : 70 to : 500 mm : 900x700 mm : 600 mm : 25 mm/s : 6 mm/s : 4 kW : 1140 mm : 940 mm : 2350 mm 4-pillar guide ram guide round table and ram with T-slots 2 hand operation Siemens PLC manometer users manual Light barrier € on Request Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Decompression valve € on Request Oil cooler with decompreission valve € on Request Pressur switch € on Request The data for this ad was created with ModulMWS - the so ...

: neu : ca. 4 Monate ab Auftragse : Italien : 74800 € : 1413.72 € : 100 to : 500 mm : 1000x800 mm : 600 mm : 26 mm/s : 5 mm/s : 4 kW : 1260 mm : 1060 mm : 2400 mm 4-pillar guide ram guide round table and ram with T-slots 2 hand operation Siemens PLC manometer users manual Light barrier € on Request Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Decompression valve € on Request Oil cooler with decompreission valve € on Request Pressur switch € on Request The data for this ad was created with ModulMWS - the ...

: neu : ca. 4 Monate ab Auftragse : Italien : 103500 € : 1956.15 € : 150 to : 500 mm : 1250x1000 mm : 600 mm : 23 mm/s : 4 mm/s : 5.5 kW : 1520 mm : 1270 mm : 2500 mm 4-pillar guide ram guide round table and ram with T-slots 2 hand operation Siemens PLC manometer users manual Light barrier € on Request Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Decompression valve € on Request Oil cooler with decompreission valve € on Request Pressur switch € on Request The data for this ad was created with ModulMWS - ...

: neu : ca. 4 Monate ab Auftragse : Italien : 65000 € : 1228.5 € : 35 to : 500 mm : 800x500 mm : 600 mm : 125 mm/s : 9 mm/s : 68 mm/s : 4 kW : 1100 mm : 1100 mm : 2300 mm 4-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 71300 € : 1347.57 € : 60 to : 500 mm : 800x500 mm : 600 mm : 120 mm/s : 8 mm/s : 58 mm/s : 5.5 kW : 1100 mm : 1100 mm : 2350 mm 4-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 78000 € : 1474.2 € : 85 to : 500 mm : 900x600 mm : 600 mm : 105 mm/s : 7 mm/s : 58 mm/s : 7.5 kW : 2250 mm : 1150 mm : 2400 mm 4-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 104000 € : 1965.6 € : 125 to : 500 mm : 1200x700 mm : 600 mm : 115 mm/s : 7 mm/s : 70 mm/s : 15 kW : 2550 mm : 1500 mm : 2600 mm 4-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 123000 € : 2324.7 € : 170 to : 500 mm : 1200x700 mm : 600 mm : 110 mm/s : 7 mm/s : 70 mm/s : 19 kW : 2700 mm : 1600 mm : 2650 mm 4-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 164500 € : 3109.05 € : 260 to : 500 mm : 1400x1000 mm : 600 mm : 75 mm/s : 5 mm/s : 60 mm/s : 22 kW : 2800 mm : 1650 mm : 2750 mm 4-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used double-head (twin-head) mitre saw for cutting aluminium profiles, brand Ferrari, model SGV500, saw blade diameter 500 mm. Economical solution suitable for straight and mitre (angle) cuts of aluminium profiles in window and aluminium-frame construction. Sold in its current condition; repairs, inspections, improvements and cleaning are at the buyer's expense. Engine power, cutting angles, sawing range, electric connection, weight and dimensions are not confirmed for this specific unit - please contact us for details. Auction-ID: A7-50988-24

Incomplete Thimonnier M3200 which is an automatic double head vertical form / fill / seal machine (Vertical FFS) to pack liquid & viscous products in pillow pouches using rolls of polyethylene. Possible products are: pasteurized milk / water / fruit juices / curdled milk / liquid yoghurt / nectars / cream / greek yoghurt / kefir / smetana / rayeb / sauces / soups or syrups. The pouches are continuously filled from an over tank headed with constant level and controlled by a proportional valve and a level sensor.The machine is very flexible and reach high output and high dosing accuracy. Strong frame made from steel profiles covered with stainless plates for maximum rigidity. A Clean-in-Place (CIP) has been integrated into the M3200’s design. All of the parts that come into contact with the product are built from stainless steel. Rate of production: 5.000 - 8.000 pouches per hour. Bag vo ...

Incomplete Thimonnier M3200 which is an automatic double head vertical form / fill / seal machine (Vertical FFS) to pack liquid & viscous products in pillow pouches using rolls of polyethylene. Possible products are: pasteurized milk / water / fruit juices / curdled milk / liquid yoghurt / nectars / cream / greek yoghurt / kefir / smetana / rayeb / sauces / soups or syrups. The pouches are continuously filled from an over tank headed with constant level and controlled by a proportional valve and a level sensor.The machine is very flexible and reach high output and high dosing accuracy. Strong frame made from steel profiles covered with stainless plates for maximum rigidity. A Clean-in-Place (CIP) has been integrated into the M3200’s design. All of the parts that come into contact with the product are built from stainless steel. Rate of production: 5.000 - 8.000 pouches per hour. Bag vo ...

CONTROLS   CNC controls SIEMENS 840 D WORKING RANGE (DOUBLE DISC GRINDER)   Grinding wheel diameter: 750 mm   grinding width max. - throughfeed grinding: 180 mm   material thickness max. - throughfeed grindin: 30 mm   grinding width max. - plunge cut grinding: 300 mm   material thickness - plunge cut grinding: 80 mm GRINDING SPINDLE 1   drive power: 48 kW GRINDING SPINDLE 2   drive power: 48 kW COMPONENT-FEEDER   Feeder Design: rotary Feeder   feeder velocity max.: 20 mm/min   feeder velocity min.: 240 mm/min DIMENSIONS / WEIGHTS   space requirements -left/right-: 4900 mm   space requirements -front/back-: 5000 mm   total height: 3100 mm   total weight approx.: 13000 kg with inline measuring system DISKUS IONIC 17A Emulsion treatment system HÜTTNER F6-157, YOM 2006

- Includes 2 parallel mounted crimping lines. - Length of the boards from 2440 mm to 2850 mm. - Width of the boards from 1830 mm to 2100 mm. - Thickness of the boards from 3 mm to 40 mm. - Each line consists of: • Automatic panel loading system. • Paper positioning system. • SIEMPELKAMP press: plate dimensions 2950 x 2200 x 150 mm, maximum opening 270 mm, total pressing force 23940 KN, maximum working pressure 320 Bars, working temperature 220° C, heating of the plates with thermal oil, maximum performance 150 pressing/hour. • Edge cleaning unit. • Tilting cooling table. • Intermediate conveyors. • Artificial vision system. - Automatic strapping machine BIELE and final magazine (common to the 2 lines). - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of th ...

Workpiece sizes: Length 180 - 2500 mm, width 150 - 800 mm, thickness 12 - 40 mm Fixed side at the left, motorised width adjustment of the right side Working height/ transport height: 920 mm Workpiecetransport with belts, infeed belts can lift up Variable feed speed Each side has got 5 glue injectors and 8 dowel inserters (Type 34) Doweldiameter: 8 mm, dowellength 30 mm, dowelprojection 7-14 mm, dowelcenters min. 32 mm, max. 736 mm Each side with dowel hopper feed with shaker and separators Controll mirror Glue pump 1:1 Glue injection controlls type ELC

Working width 180 - 3200 mm, electronic setting Sieb & Meyer Fixed side at the left Chain transport, 80 mm wide Infeed for panels of about 1 m. Top pressure by driven belts Max. workpiece thickness: 80 mm Feedspeed 7 - 35 m/min, motor 2,2 kW Pop-up dogs every 1m10 Equipment left / right: 1 st post Front: 1+1 Jump scorer, motor 1,5 kW, 100 Hz, joined to 1+1 Hogger, motor 3 / 4,4 kW, 50/100 Hz Rear: 1+1 Jump milling, tilting, motor 1,5 kW, 100 Hz 2nd post Front: 1+1 Jump milling, tilting, motor 1,5 kW, 100 Hz Rear: 1+1 Fixed milling, tilting, motor 2,2/3,3 kW, 50/100 Hz 3th post Front: 1+0 Jump milling, tilting, motor 2,2/3,3 kW, 50/100 Hz Rear: 1+1 Jump milling, tilting, motor 1,5 kW, 100 Hz All units with horizontal/vertical adjustment and Siko read-out Outfeed chain approx. 80 cm length Sound and safety enclosures

A complete extrusion line is available, equipment: 5x control cabinets, 1x frequency inverter for the main drive, 1x frequency inverter for ZSB/heating, 1x PLC control system, 1x feeder, 1x vibrating screen with Congrav, 2x pre-feeders from Brabender, 2x gravimetric feeders from Brabender, 1x volumetric feeder from Brabender, 1x Coperion ZSK 58 Mc twin-screw extruder, 1x ZS-B 58, 1x frequency inverter cabinet, 1x SL cabinet with Siemens S7-300 control system, 1x local control cabinet at the machine with integrated EPC NT operator terminal with LM3 from Brabender, 1x cooling unit, 1x complete strand pelletizing system, 1x classifying screen with extraction system, 1x pair of spare screw shafts with screw elements, material 15, unused, total weight of the system: 5.843t, with documentation. An on-site inspection is possible.

Offer 26342 Technical data: - Saw blade diameter 420 mm - Saw blade bore 30 mm - Max cutting length 6000 mm - Smallest cutting length at 90° + 45° 335 mm - Section area, see diagram attached - Swivel range inwards pneumatically 90 - 22.5 ° - Inward inclination range pneumatic 90 - 45 ° - Saw blade speed 2800 rpm - Drive 400 V / 2 x 4000 Watt - Compressed air connection 7 bar - Air consumption per work cycle - without spraying approx. 40 l - with spraying approx. 64 l - Space requirement approx. W 7500 x H 1600 x D 1600 mm - Weight approx. 1800 kg - with: - manual cutting length adjustment with digital display, - Sawing unit swivel and tiltable for high and wide profiles, - as well as screech cuts possible, can be swivelled inwards 22.5°, - Digital degree display - separate control cabinet, - Cycle spraying  ...

Key data: 600 t, 550 mm

RÖCHER hydraulic press from the site.

(x11 meters) from Professional Gondolas to Clothing for Stores. 10 sections of 1 meter Double rack. Auction-ID: A1-51213-18

Luke & Spencer Marble Supplied - 3 Phase 220V/380V 7.5HP Used in Metal Workshop, Foundry Auction-ID: A1-51273-21

Auction-ID: A1-50864-100

Professional HDR LUX heavy-duty industrial pallet racking system. Configuration: double row consisting of 2 back-to-back rows. Each row comprises 14 bays, for a total of 28 bays. Approximate overall length: 39.40 m. Bay width: 2,700 mm. Upright frame height: 10,000 mm. Upright frame depth: 1,100 mm per row. Storage configuration offered in this lot: floor storage + 4 beam levels. Beam dimensions: approximately 2,700 x 130 x 50 x 1.4 mm. Reference beam level load capacity according to manufacturer documentation: 3,000 kg per level. Heavy-duty steel construction. Modular and dismantlable pallet racking system for professional warehouse, logistics and industrial storage applications. The racking is currently dismantled and ready for collection. The lot is offered as one complete double-row pallet racking configuration. Images shown are reference images from other installations ...

Professional HDR LUX heavy-duty industrial pallet racking system. Configuration: double row consisting of 2 back-to-back rows. Each row comprises 14 bays, for a total of 28 bays. Approximate overall length: 39.40 m. Bay width: 2,700 mm. Upright frame height: 10,000 mm. Upright frame depth: 1,100 mm per row. Storage configuration offered in this lot: floor storage + 4 beam levels. Beam dimensions: approximately 2,700 x 130 x 50 x 1.4 mm. Reference beam level load capacity according to manufacturer documentation: 3,000 kg per level. Heavy-duty steel construction. Modular and dismantlable pallet racking system for professional warehouse, logistics and industrial storage applications. The racking is currently dismantled and ready for collection. The lot is offered as one complete double-row pallet racking configuration. Images shown are reference images from other installations ...

Professional HDR LUX heavy-duty industrial pallet racking system. Configuration: double row consisting of 2 back-to-back rows. Each row comprises 14 bays, for a total of 28 bays. Approximate overall length: 39.40 m. Bay width: 2,700 mm. Upright frame height: 10,000 mm. Upright frame depth: 1,100 mm per row. Storage configuration offered in this lot: floor storage + 4 beam levels. Beam dimensions: approximately 2,700 x 130 x 50 x 1.4 mm. Reference beam level load capacity according to manufacturer documentation: 3,000 kg per level. Heavy-duty steel construction. Modular and dismantlable pallet racking system for professional warehouse, logistics and industrial storage applications. The racking is currently dismantled and ready for collection. The lot is offered as one complete double-row pallet racking configuration. Images shown are reference images from other installations ...

Professional HDR LUX heavy-duty industrial pallet racking system. Configuration: double row consisting of 2 back-to-back rows. Each row comprises 14 bays, for a total of 28 bays. Approximate overall length: 39.40 m. Bay width: 2,700 mm. Upright frame height: 10,000 mm. Upright frame depth: 1,100 mm per row. Storage configuration offered in this lot: floor storage + 4 beam levels. Beam dimensions: approximately 2,700 x 130 x 50 x 1.4 mm. Reference beam level load capacity according to manufacturer documentation: 3,000 kg per level. Heavy-duty steel construction. Modular and dismantlable pallet racking system for professional warehouse, logistics and industrial storage applications. The racking is currently dismantled and ready for collection. The lot is offered as one complete double-row pallet racking configuration. Images shown are reference images from other installations ...

Pressing force: 100t, distance between uprights: 1030mm, stroke: 600mm, max. installation height: 900mm, table dimensions X/Y: 1000mm/1000mm, table height above floor level: 850mm, lateral opening between uprights: 540mm, ram dimensions X/Y: 900mm/1000mm, oil capacity: 500l, drive power: 30kW. Machine dimensions X/Y/Z: approx. 2000mm/1700mm/4200mm, weight: approx. 10t. The press was mainly used for die tryout and pressing small batches. Documentation available. An on-site inspection with the machine powered on is possible.

Auction-ID: A1-41281-9

Double swing gate complete set (height: 2,000 mm) Details: Description: Double bar mat fence gate complete set (height: 1,800 mm) Details: 2 m x 3 m, complete set including post and handle set/fastening material Colour: Anthracite (RAL 7016) Gate: Frame 60/40 (2,000 mm high and 3,000 mm wide) Posts for concreting: 2,400 mm (80/80) Door panel: 6/5/6 Mesh size: 50mm x 200mm Number of doors: 2 Number of posts: 2 Location: 32602 Vlotho Auction-ID: A1-51371-45

75 running metres, 6/5/6 mm, height 2.03 m Double bar mat fence complete set including post and fastening material retaining plates Fence elements: 2,030 mm high and 2,500 mm long Posts for concreting: 2,600 mm Number of fence elements: 30 pieces Number of posts: 31 pieces Double rod mats Material (RAL) Galvanized according to DIN EN 10244-2 and powder-coated Fence Spikes 30mm Mesh size 50mm x 200mm Mat width 2510mm Fence post with clamp Material: Hot-dip galvanized, powder-coated according to DIN EN ISO 1461 and RAL 7016 Material: Post cap: Plastic Material Accessories Stainless Steel Post profile (mm) 60 x 40 x 2 Fence fastening Stainless steel rivet nuts already integrated into the post Screws for Clamps Stainless Steel Screws M8 Accessories (included) Pre-assembled plastic fastening attachments incl. rivet nuts, aluminium clamping tabs, fence screws M8 x 4 ...

75 running metres, 6/5/6 mm thickness, height 1.83 m Double bar mat fence complete set including posts and Clamp plate fastening material Fence elements: 1830 mm high and 2,500 mm long Posts for concreting: 2400 mm Number of fence elements: 30 pieces Number of posts: 31 pieces Total weight: 900 kg Double rod mats material: Galvanized according to DIN EN 10244-2 and RAL 6005 powder-coated according to 10245-4 Fence tips: 30mm Mesh size: 50mm x 200mm Mat width: 2510mm Fence post material: Hot-dip galvanised according to DIN EN 10244-2 and RAL 6005 powder-coated according to 10245-4 Post cap material: plastic Material accessories: stainless steel Post profile: 60 x 40 x 1.5mm Pre-assembled fastening attachments made of plastic incl. rivet nuts, clamping plates made of stainless steel, fence screws M8 x 40 stainless steel, post caps without protrusion Location: Industriestraße 19 32602 Vlo ...

62.5 running metres, 8/6/8 mm Height: 0.83 m Double bar mat fence complete set including post and fastening material retaining plates Fence elements: 830 mm high and 2,500 mm long Posts for concreting: 1400 mm Number of fence elements: 25 pieces Number of posts: 26 pieces Double rod mats Material (RAL) Galvanized according to DIN EN 10244-2 and powder-coated Fence Spikes 30mm Mesh size 50mm x 200mm Mat width 2510mm Fence post with clamp Material: Hot-dip galvanized, powder-coated according to DIN EN ISO 1461 and RAL 7016 Material: Post cap: Plastic Material Accessories Stainless Steel Post profile (mm) 60 x 40 x 2 Fence fastening Stainless steel rivet nuts already integrated into the post Screws for Clamps Stainless Steel Screws M8 Accessories (included) Pre-assembled plastic fastening attachments incl. rivet nuts, aluminium clamping tabs, fence screws M8 x 40 ...

5 running metres, 6/5/6 mm thickness, height 1.43 m Double bar mat fence complete set including posts and Clamp plate fastening material Fence elements: 1430 mm high and 2,500 mm long Posts for concreting: 2000 mm Number of fence elements: 30 pieces Number of posts: 31 pieces Total weight: 800 kg Double rod mats material: Galvanized according to DIN EN 10244-2 and RAL 6005 powder-coated according to 10245-4 Fence tips: 30mm Mesh size: 50mm x 200mm Mat width: 2510mm Fence post material: Hot-dip galvanised according to DIN EN 10244-2 and RAL 6005 powder-coated according to 10245-4 Post cap material: plastic Material accessories: stainless steel Post profile: 60 x 40 x 1.5mm Pre-assembled fastening attachments made of plastic incl. rivet nuts, clamping plates made of stainless steel, fence screws M8 x 40 stainless steel, post caps without protrusion Location: Industriestraße 19 32602 Vlot ...

150 running metres, 6/5/6 mm thickness, height 1.83 m Double bar mat fence complete set including posts and Clamp plate fastening material Fence elements: 1830 mm high and 2,500 mm long Posts for concreting: 2400 mm Number of fence elements: 60 pieces Number of posts: 61 pieces Total weight: 1860 kg Double rod mats material: Galvanized according to DIN EN 10244-2 and RAL 7016 powder-coated according to 10245-4 Fence tips: 30mm Mesh size: 50mm x 200mm Mat width: 2510mm Fence post material: Hot-dip galvanized according to DIN EN 10244-2 and RAL 7016 powder-coated according to EN10245-4 Post cap material: plastic Material accessories: stainless steel Post profile: 60 x 40 x 1.5mm Pre-assembled fastening attachments made of plastic incl. rivet nuts, clamping plates made of stainless steel, fence screws M8 x 40 stainless steel, Post caps without protrusion Location: Industries ...