double wire used for sale

Office double workstation light grey, 2 angle desks each approx. 250x160 cm, 2 filing cabinets each approx. 80x205h cm, hanging file cabinet, sideboard, 1 swivel chair

Hydraulic extendable up to 6 meters long. Electric/hydraulically operated Auction-ID: A1-40134-276

13 pieces of double locker cabinets. 60cm width per unit of 2 lockers. Auction-ID: A1-40104-111

Load capacity: maximum. 500 kg Including: assembled plastic plate: 115 x 130 (L/W) Auction-ID: A1-45762-23

Grinding wheel diameter max. 300 mm Speed 1390 rpm Connection voltage 400 V Motor power 2.2 KW Condition: unchecked Auction-ID: A7-45761-739

Load capacity: maximum. 500 kg Auction-ID: A1-45762-90

Load capacity: maximum. 500 kg Auction-ID: A1-45762-74

Transporter / flatbed vehicle with double cab Make / Model: Opel Movano Registration date: 12.01.2018 Year of construction: 2018 Engine: 2.3 CDTI BiTurbo diesel engine Displacement: 2299 cm³ Power: 125 kW (170 hp) Fuel: Diesel Emission standard: Euro 6 Transmission: Manual Propulsion: Front-wheel drive Mileage: 173,877 km (when photographed) Body: Double cab with loading area Seats: 7 Doors: 4 Color: Red Steering Wheel: Left Curb weight: 2,205 kg Payload: 1,295 kg Towing capacity: unbraked: 750 kg braked: 2,500 kg Documents: Vehicle documents available Export: self-pick-up / transfer possible Condition: used, ready to drive Tyres: partly worn (2 tyres close to wear limit) Maintenance: Oil change recommended Technical inspection/TÜV: valid until February 2028 Auction-ID: 046-WKV-4

OMGA TR2A double miter saw: – useful opening 2800mm – adjustable blades D=300mm – total power kw 3.2, volt 380 Machine not CE compliant, for export

Technical data Manufacturer: OTEC Präzisionsfinish GmbH Type: CF 2x50 Year of Make: 2004 Machine No.: 250/04 0147 Power consumption: 5.0 kVA Voltage: 400 V Frequency: 50/60 Hz Pre-fuse: max. 16 A Configuration Type: Vibratory finishing machine with round tank Control: integrated control panel with display Execution: Double container system (2x50) Origin: Made in Germany Auction-ID: A1-45711-326

- Engine 0.37 KW-2850 rpm. - Maximum wheel diameter approx. 200 mm. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-723

Number of pistons 3 Table dimensions ( x-y/mm) 2210 x 1830 Slide Dimensions X-Y (mm) 2210 x 1830 Stroke (mm) 915 Cushion number 1 Cushion type hydraulic Cushion stroke (mm) 406 Cushion power (ton) 250 Weight ( ton) 100 Machine Conditions ce marked

- 2 cutting heads: one fixed and one mobile. - Disc diameter 250 mm. - Motor power 3 KW. - Maximum cutting length approx. 3000 mm. - 90° outlet with straps. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-736

Key data: 300 t, 2 mm, 600 mm

Pressure: 300 tons Distance between the uprights 1800mm Side passages: Yes Installation height: 1000mm Table: 1800x1000mm Plunger: 1800x1000mm Stroke: 600mm Weight: 43 tons Height: 4700mm Siemes S7 Controller Ground-level installation Sick Light Barrier Cushion: Stroke 200mm

- 2 cutting heads: one fixed and one mobile. - Disc diameter 300 mm. - Maximum cutting length approx. 2900 mm. - 90° outlet with straps. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-735

- Engine power 1.50 KW-3000 rpm. - Maximum cutting length approx. 3000 mm. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-710

machine 1: Fixed side at the left, working width 220 mm to 2500 mm Workpiece overhang max. 110 mm Electronic width adjustment Panel thickness 8 - 90 mm Top pressure by belts Rolling chain with automatic lubrication, automatic pop-up dogs every 1000 mm Feed speed 10 - 40 m/min Chain infeed taking 1,62 m. panels in front of the dogs Panel alignment at the infeed Middle support NC 30 controlls Equipment left and right: 1+1 Jump universal shaper 6 kW 1+1 Twin hogging unit, motors 6,6 kW (2 motors) 1+1 Universal shaper 6 kW 1+1 Jump universal shaper 6 kW panel turning device HOMAG TD 31/30/13 Year 1989 machine 2: Fixed side at the left, working width 220 mm to 3000 mm Workpiece overhang max. 110 mm Electronic width adjustment Panel thickness 8 - 90 mm Top pressure by belts Rolling chain with automatic lubrication, automatic pop-up dogs every 1000 mm Feed speed 8 - 40 m/min Chain infeed taking ...

4-side squaring and edge banding line Machine 1: Fixed side right, moving side left Rolling chain, feed 10 - 40 m/min Controlls NC 21 Panel thickness 8 - 60 mm Max. panel width 1500 mm Edges: coil 0,3 - 3 mm, strips 0,4 - 20 mm Entry fence for veneered panels Equipment: 1+1 Compact-twin hogger, 2 motors 6,6 kW 1+1 Compact hot melt unit A20 with panel edge pre-heating, glue roller Q34, twin coil magazine, lateral pressure rollers C including anti-stick application 1+1 Free space for solid wood edges up to 2,54 m length 1+1 Rough trimming, 2 x 1,5 kW 1+1 Fine- or radius trimming, 2 x 0,4 kW (edges up to 6 mm) 1+1 Universal shaper 8,1 kW 1+1 Universal shaper 8,1 kW 1+1 Edge sander KS 10 1+1 Disc sander DS 40 1+1 Disc sander DS 40 Angular transfer to the right, TWR 24/30/12/S Panel sizes: width 250 - 1200 mm, length 250 - 3000 mm, thickness 8 - 45 mm Machine 2 Machine II + infeed magazine TW ...

Workpiece sizes: Length 180 - 2500 mm, width 150 - 800 mm, thickness 12 - 40 mm Fixed side at the left, motorised width adjustment of the right side Working height/ transport height: 920 mm Workpiecetransport with belts, infeed belts can lift up Variable feed speed Each side has got 5 glue injectors and 8 dowel inserters (Type 34) Doweldiameter: 8 mm, dowellength 30 mm, dowelprojection 7-14 mm, dowelcenters min. 32 mm, max. 736 mm Each side with dowel hopper feed with shaker and separators Controll mirror Glue pump 1:1 Glue injection controlls type ELC

Working width 180 - 3200 mm, electronic setting Sieb & Meyer Fixed side at the left Chain transport, 80 mm wide Infeed for panels of about 1 m. Top pressure by driven belts Max. workpiece thickness: 80 mm Feedspeed 7 - 35 m/min, motor 2,2 kW Pop-up dogs every 1m10 Equipment left / right: 1 st post Front: 1+1 Jump scorer, motor 1,5 kW, 100 Hz, joined to 1+1 Hogger, motor 3 / 4,4 kW, 50/100 Hz Rear: 1+1 Jump milling, tilting, motor 1,5 kW, 100 Hz 2nd post Front: 1+1 Jump milling, tilting, motor 1,5 kW, 100 Hz Rear: 1+1 Fixed milling, tilting, motor 2,2/3,3 kW, 50/100 Hz 3th post Front: 1+0 Jump milling, tilting, motor 2,2/3,3 kW, 50/100 Hz Rear: 1+1 Jump milling, tilting, motor 1,5 kW, 100 Hz All units with horizontal/vertical adjustment and Siko read-out Outfeed chain approx. 80 cm length Sound and safety enclosures

Double office container system 2x 20, nameplate not visible, no middle wall, height 281 cm, electrification, air conditioning split unit, without contents, can only be picked up if gallery above it is dismantled

Double bench grinder REMA DS04/150 built in 2013, S/N 131024008, 160x25x51 mm, 400 V

Semi-automatic double clipper PolyClip PDC 600, Built in 2002, air hoses and rollers renewed, Dimensions LxWxH approx. 100x80x190cm, weight approx. 85kg, good used condition, fully functional

DEFECTS: There is a noise in the engine, video in the ad Alert on the dashboard: worn brake lining - engine anomaly - engine oil change. The vehicle is driving but we don't know the origin of the noise. Auction-ID: A3-43368-35543

2-Shaft Mixer; with tilt function; Lining and kneading wings are made of stainless steel, 2-Z-shaped kneading blades; Length 2.90 m, width 1.30 m, height 2.10 m, trough size 64 x 69 x 55 mm Engine type ZG4 KMR 132 S4; Motor power: 7.5 kW; Motor voltage: 380/ 660 V; Rated speed motor: 1435 ... 1480 rpm; Output speed (gearbox): 160 rpm. The plant was shut down in 2024. more photos on request

CFS Slagelse A/S cooled double shaft paddle mixer on weighing cells, type: UNIMIX I 2500, machine number: 5000068163 POS 26, year of construction: 2011, 400 V, 3 Ph, 50 Hz, 41.2 A, 22 kW, CO2 injection, volume: 2500 liter, dimensions: 4600 mm x 2200 mm x 3500 mm.

Garos vacuum tumbler with double jacket for cooling on weighing cells, type: MDF1600K, serial number: 26308026, year of construction: 2003, 3 x 380 V, 50 Hz, 5.2 kW, volume: 1600 liter, capacity: maximum 1100 kg, speed: 1.8 - 8.0 rates per minute, infeed height: 1650 mm, outfeed height: 880 mm, weight: 1650 kg, total dimensions: 3070 mm x 1900 mm x 2250 mm.

Nesto double shaft paddle mixer, type: MIX MAXI-200, serial number: 2014, year of construction: 2024, 400 V, 3 Ph, 50 Hz, weight: 300 kg, volume: 200 liter, dimensions: 1450 mm x 700 mm x 1500 mm. Never used.

Wolfking double shaft paddle mixer, type: TSM 400L, number: 56065, year of construction: 09/1993, 380 V, 3 Ph, 50 Hz, 20 A, 8 kW, volume: 400 liter, dimensions: 2000 mm x 1650 mm x 2700 mm.

Henkelman mobile double chamber vacuum machine, model: POLAR 2-85, seal length: (4x) 830 mm, chamber dimensions: 830 mm x 830 mm, total dimensions: 1900 mm x 1300 mm x 1100 mm.

Nesto double shaft paddle mixer with lifter for 200 liter meat bins, type: MIX MAXI-450, serial number: 1030, year of construction: 2026, 400 V, 3 Ph, 4 kW, weight: 620 kg, volume: 450 liter, total dimensions: 2000 mm x 610 mm x 470 mm. Never used.

Stephanal Alvac mobile double chamber vacuum machine, type: Gemini, machine number: 1049-5437, year of construction: 2019, 230/400 V, 3 Ph, 50 Hz, 8.5/5 A, 2.2 kW, seal length: (4x) 550 mm, chamber dimensions: 615 mm x 550 mm, Busch vacuum pump, type: RA 0100 F 5R3, serial number: D18061371, capacity: 100 m³ per hour, total dimensions: 1500 mm x 500 mm x 1500 mm.

-Storage racks with 6 different diameters. -Automatically driven roller conveyors, fully automatic length stop, automatic ejection in pre-sorting compartments. -PLC control for convenient machine control. -Blade width of hydraulic machine : 150mm. -Capacity: 5 to 15Ton per day/shift. -Low maintenance & wear parts, still in perfect working condition with no known problems. Sale due to cessation of internal production. DBS3 automatic double bender. -Linked with cutting line. Equipped with hydraulically controlled roller conveyor, automatic transfer system, automatic double bender and ejection system in automatic pre-sorting compartments. -Simple PLC control, equipped with automatic clamping system. -Low maintenance & wear parts, still in perfect working condition with no known problems. Sale due to cessation of internal production. Auction-ID: A3-43515-16394

Seydelmann cooled vacuum double shaft paddle mixer with Oslos lifter for pallet boxes, type: PV 4000, machine number: 11422-1, year of construction: 2011, 400 V, 50 Hz, 125 A, 60 kW, weight: 6500 kg, dimensions: 4250 mm x 2300 mm x 2750 mm. Oslos lifter, type: Column Loader 1000S, serial number: E011270705118/9001, year of construction: 09/2021, 380 V, 3 Ph, 50 Hz, 5.2 A, 2.2 kW, capacity: 1000 kg, dimensions lifter: 700 mm x 2600 mm x 4200 mm, dimensions lifting arm: 1750 mm x 1600 mm x 1250 mm.

Dimensions: 1441 x 835 x 2050 mm Gross / net capacity: 1430 liters Temperature: -22/-15°C at +43°C ambient temperature - climate class 5 Energy class C - insulation: 75 mm cyclopentane - internally and externally made of stainless steel 1.4301 (AISI304) - internal stainless steel base plate in 1 piece with rounded Angles - Adjustable U-shaped guides on detachable guide supports - Digital display - LED lighting 8 rilsan racks 2/1 GN, 530 x 650 mm - 5 stainless steel leveling feet, 110-165 mm high Net weight: 106 kg - noise level: 56 dBA - connected load: 230V / 0.7 kW Auction-ID: A1-40105-75

Buderus double wall-hung condensing gas boiler, model: Logamax Plus, type: GB272-150 H, serial number: 3290-279-000027-7736701646 and 3290-280-000027-7736701646, 2 Wilo circulation pumps, total dimensions: 1050 mm x 700 mm x 1700 mm, control panel, dimensions: 650 mm x 300 mm x 300 mm and 2 Buderus expansion vessels, model: (2x) Logafix BU-H 18 L, volume: (2x) 18 liter.

Equipped with 2 showers; 220 Volt connection; lockable with key and knob cylinder; spoon holes and lifting eyes; unused Auction-ID: A1-40105-266

Ekomex double paddle vacuum mixer with lifter for 200 liter meat bins, type: ML-1000V, serial number: 14040801, year of construction: 2018, 3 x 400 V, 50 Hz, 9 kW, Busch vacuum pump, type: KB 0040 D 100, serial number: D16410645, year of construction: 2016, volume: 48 m³ per hour, total dimensions: 2400 mm x 2100 mm x 2700 mm.

Slide diameter: 600mm, tilted table. Auction-ID: A1-45979-112

CFS double shaft paddle mixer on weighing cells with switch cabinet, type: UNIMIX 1500L, serial number: 62267, year of construction: 2002, 3 x 400 V, 50 Hz, 11 kW, volume: 1500 liter, infeed height: 1850 mm, outfeed: 800 mm (double meat bin), Flintec SB4-20kN GP-s weighing cells with Bizerba indicator, dimensions mixer: 2600 mm x 1700 mm x 2300 mm.

Sanding diameter: 1000mm, Table tilted adjustable. Auction-ID: A1-45979-126

\"Max. width: 2000 mm Min. width: 250 mm Max. height: 100 mm Min. Height: 10 mm\" Auction-ID: A7-45983-17

Sanding diameter: 900mm, tables tilted. Auction-ID: A1-45979-111

+4 modules sloping roof Auction-ID: A1-45889-359

Sanding diameter: 800mm, Table tilt. Auction-ID: A1-45979-113

Auction-ID: A1-45889-2871

2 toilets; 2 sinks; ventilation grille; ventilation unit; light; toilet paper holder holder; lockable; 220v; drainage; forklift slots; crane hooks; 5891 Auction-ID: A1-45901-16

Double Scissors Lift Corghi ERCO 630 Auction-ID: A7-45974-5

MACER agricultural tipping trailer. Type: Double-axle agricultural tipper Case dimensions: approx. 4.5 to 5 m long / 2.3 m wide Total length: approx. 6.5 to 7 m Connection: hydraulic + electric 12V Tyres: good overall condition ⚠️ Status: • Corrosion on the sides • Healthy overall structure Auction-ID: A3-43520-38015

A hydraulic double-column drawing press, which has only been used as a die tryout press, is available. Press force: 2500kN, stroke: 400mm, max. installation height: 600mm, table dimensions X/Y: 1250mm/800mm, column clearance: 1350mm, side passage: 640mm, table height: 800mm. Machine dimensions X/Y/Z: approx. 5700mm/3600mm/2800mm, weight: approx. 36000kg. The machine received a new screen, a hydraulic pump, a Sitema fall protection system, a press cylinder seal kit and an oil change in the last 12 years. Documentation available. An on-site inspection is possible.