double wall used for sale

4 factory-tested, very well preserved double girder cranes Load approx. 20.000 kg Wingspan approx. 16.650 mm Hook path about 5.000 mm Fabrikat MAN/SWF Year of production/workshop test 1995/2016 Cranes equipped with SWF double girder trolleys with reduced design to minimize the installation height, freely movable floor control Working speeds: Hoist approximately 0.32/3.2 m / min Katz LG 5.0/20,0 m / min Crane chassis 10.0/40.0 m / min

AUTOMATIC DOUBLE END TENONER Type GABBIANI TMN 56 . second hand max.opening mm. 3100 min. opening mm.160 max. useful height mm.120 variable feed rate from 4 to 18,5 mt/min Equipped with 3+3 working units - 1+1 scoring unit . motor power HP 1.3 - 1+1 hogging / milling unit . motor power HP 5,5 - 1+1 milling unit . motors power HP 5,5 volt. 380/50

Grinding wheel diameter x W: 200 x 32 mm Grinding wheel bore: 32 mm Grinding wheel grain: K 36 / K 80 RPM: 2850 RPM S1 engine power output 100%: 0.90 kW Motor power S6 40%: 1.25 kW Voltage: 400 V Width: 510 mm Depth: 270 mm Height: 310 mm Weight: approx. 25 kg Scope of delivery: Roughing wheel K 36 Simple disk K 80 Spark cover on both sides Workpiece support Base extra charge available. Special price including delivery to 1 address Germany (Mainland).

Poly-clip PDC 700 semi-automatic double-clipper, year of construction 2002, for fibrous, plastic, natural and collagen casings, calibres up to 115 mm, sits on a trolley, suitable for following clip sizes: S 735 / 740 / 744, air pressure: 4-6 bar, refurbished. The machine is immediately available and can be tested in Koblenz, Germany.

Kragarmregal, double-sided, 5.18m height, 1.20m arms, 870kg per arm - NEW - : Price from location incl. loading! 1 shelving unit with 4 pcs 2,495.-EUR (net)! A Kragarm shelving system, hot-dip galvanized, consisting of: 4 double-sided shelves approx. 5.18 m high, hot-dip galvanized IPE 180 / 100 with 2x3 each. Arms 1.20 m, 870 kg load capacity per arm with verbatim approx. 1.30 m shelf divider approx. 5180mm high, hot-dip galvanized foot and arm depth 1200 mm with 3 adjustable shelf arms each with centre of gravity 600 mm 870 kg per arm / 2610 kg per stalker with laengs and diagonal connectors e = 1300 mm for a shelf row with 4 stems approx. 4000 mm long with all screws and nuts, without bottom anchors . Other configurations (frame height, armrails, arm types, etc.) can be used! Please contact us! photos of an old shelf!; New

Kragarmregal, double-sided, 5.18m height, 1.20m arms, 500kg per arm - NEW - : Price from location incl. loading! 1 shelving unit with 4 pcs 2,295.-EUR (net)! A Kragarm shelving system, hot-dip galvanized, consisting of: 4 double-sided shelves approx. 5.18 m high, hot-dip galvanized IPE 180 / 80 with 2x3 each. Arms 1.20 m, 500 kg load capacity per arm with verbatim approx. 1.30 m shelf divider approx. 5180mm high, hot-dip galvanized foot and arm depth 1200 mm with 3 hoes-adjustable shelf armseached carrying capacity at load centre 600 mm 500 kg per arm / 2610 kg per staender with laengs and diagonal connectors e = 1300 mm for a shelf row with 4 stems approx. 4000 mm long with all screws and nuts, without bottom anchor s. Other configurations (frame height, armrails, arm types, etc.) can be used! Please contact us! photos of an old shelf!; New

Kragarmregal, double-sided, 4,16m height, 1.20m arms, 500kg per arm - NEW - : Price from location incl. loading! 1 shelf unit with 4 pcs 1.850.-EUR (net)! A Kragarm shelving system, hot-dip galvanized, consisting of: 4 shelves double-sided approx. 4.16m high, hot-dip galvanized IPE 160 / 80 with 2x3 each. Arms 1.20 m, 500kg load capacity per arm with verbatim approx. 1.30 m shelf divider approx. 4160mm high, hot-dip galvanized foot and arm depth 1200 mm with 3 hoes-adjustable shelf arms carrying ability at load centre 600 mm 500 kg per arm / 2250kg per stem with laengs and diagonal connectors e = 1300 mm for a shelf row with 4 stems approx. 4000 mm long with all screws and nuts, without bottom anchors. Other configurations (frame height, armrails, arm types, etc.) can be used! Please contact us! photos of an old shelf!; New

Kragarmregal, double-sided, 3,50m height, 1,20m arms, 500kg per arm - NEW - : Price from location incl. loading! 1 shelving unit with 4 staenders 1.750.-EUR (net)! A Kragarm shelving system, hot-dip galvanized, consisting of: 4 double-sided shelves approx. 3.50m high, hot-dip galvanized IPE 160 / 80 with 2x3 each. Arms 1.20 m, 500kg load capacity per arm with verbatim approx. 1.30 m shelf divider approx. 3500mm high, hot-dip galvanized foot and arm depth 1200 mm with 3 hoes-adjustable shelf arms carrying ability at load centre 600 mm 500 kg per arm / 2250kg per staender with laengs and diagonal connectors e = 1300 mm for a shelf row with 4 stems approx. 4000 mm long with all screws and nuts, without bottom anchor s. Other configurations (frame height, armrails, arm types, etc.) can be used! Please contact us! photos of an old shelf!; New

Kragarmregal, double-sided, 3,50m height, 1,20m arms, 750kg per arm - NEW - : Price from location incl. loading! 1 shelf unit with 4 pcs 1.900.-EUR (net)! A Kragarm shelving system, hot-dip galvanized, consisting of: 4 shelves double-sided approx. 3.50m high, hot-dip galvanized IPE 160 / 100 with 2x3 each. Arms 1.20 m, 750kg load capacity per arm with verbatim approx. 1.30 m shelf divider approx. 3500mm high, hot-dip galvanized foot and arm depth 1200 mm with 3-adjustable helving armseached each carrying ability at load centre of gravity 600 mm 750 kg per arm / 2250kg per staender with laengs and diagonal connectors e = 1300 mm for a shelf row with 4 stems approx. 4000 mm long with all screws and nuts, without bottom anchors Other configurations (frame height, armrails, arm types, etc.) can be used! Please contact us!; New

Rexroth double valve 4WRKE 25

Technische Daten: - Durchlassbreite 950 mm - verstellbereich zwischen linkem und rechtem Sägeaggregat 60 - 430 mm - Schnitthöhe min. / max. 15 - 80 mm - min. / max. Abstand der Sägeblätter vom linken bzw. rechtem Sägeaggregat 10-100 mm (verstellbar durch fixen Distanzring) - 4 Stück HM - Sägeblatt 400 x 80 mm Z 18 - Geschwindigkeit Breitenverstellung 10 mm/s - Motorleistung Säge 2 x 5,2 kW - Motorleistung Vorschub 1,1 kW - Motorleistung Breitenverstellung 1,1 kW - Gesamtleistung 12,6 kW / 400 V - Vorschubgeschwindigkeit 7, 10, 13, 14, 20, 26 m/min - Abmessungen L=1600, B=1500, H=1500 mm - Länge Einlaufseite 3150 mm - Länge Auslauftisch 2300 mm - Gesamtlänge 7000 mm - Gewicht 1400 kg OPTION: elektrische Messeinrichtung für Breitenverstellung ( electronic measurement of width to be edged) Netto EUR 750,-

Collar shelving, double-sided, 5, 18 m high, 1, 20 m arms, 870 kg per arm - new -: Price from site including loading! 1 shelf unit with 4 stand EUR2.495.-(net)! A cantilever rack system, hot-dip galvanized, consisting of: 4 shelf stand double-sided measures 5.18 m, hot-dip galvanized IPE 180 / 100 with each 2 x 3 verstellb. Poor 1.20 m, 870 kg capacity per arm with associations about 1.30 m Shelf stand double-sided about 5180 mm high, hot-dip galvanized Foot and arm depth 1200 mm with 3 adjustable shelf arms Load capacity at load Centre 600 mm 870 kg each arm / 2610 kg per stand with longitudinal and diagonal associations e = 1300 mm When a shelf set with 4 stands approx. 4000 mm long with all bolts and nuts, without ground anchor. Other configurations (frame height, arm length, arm types etc.) can be selected. Please speak to us! Photos of a similar rack!

Description: heavy double grinding buck (Leipzig Iron and Steel Works) with chip container Technical data Grinding wheel permeser 400 mm Operating voltage 380 volts Drive power 4 KW Weight approx. 340 kg Dimensions (LxWxH) 1100 x 1150 x 1120 mm

Ready exhibition machine built in 2016 Mercodor ZM 44 Cutting Chamber 500 x 380 mm knife 14 3 mm hook drive 7,5 kw

Complete extrusion line with support for sale, dispense, extrude, granulate and SAG (complete pictures in the PDF). Extruder: Feddem FED 72 MTS, 2000., 2012 general overhaul. 600-1000 kg / h with PBT, PA6, PA66, GF and impact resistant modified products. Thyssen TGE 3-72-DOS-4 transmission, 314 kW Compexmotor, 4 degassing zone with 3 vacuum degassing, 3 body parts open side feeder, new price from 690.000 € Dosage: Dosage: 6 Brabender dosing scales with control, multiple pellets/Flake car, 2 powder scales, a fiberglass scales, Transitube support for glass fibers Side feeder: Feddem/Flender Vacuum pump: Integrated Granulation: IPS SG120/7.5, 2000, 9 kW Also here: Complete solid steel frame for the feeders and water bath brushes, bagging Tower for granules with S + S all metal separator, Transitube glass fiber/material high to promote

with automatic working cycle, max. working width / stroke length of the oscillation 120 mm, drilling depth max. 80 mm, table inclination max. 20, tool clamping diameter max. 13 mm, drilling diameter max. 20 mm, spindle motor power 2.24 KW / volt. 380/50 Hz, spindle speed 9,000 rpm, oscillating motor power 0.75 KW, oscillation adjustable from 120 - 240 huebe per minute, pneumatic factory tension, 4 suction nozzles D=80 mm, space requirement - depth 1,000 mm, width 1,300 mm, height 1250 mm, weight 500 KG; Technically and visually in very good condition

10 stupid pneumatic cylinder double acting RT/57216/M/50 Diameter 16mm Piston path 50mm p 1-10bar Tmax 80C L2H (new price per piece 31.52.-EUR) Additional ly20 piece Norgren Reed Switch M/50/LSU/2V Lock (NP24.95/pc) Additional items Screw fittings and connections Additional mounting kit QM/33/016/23 Pneumatics, hydraulics, drive elements Special price

Double grinding buck Rema with cue equipment, large collecting tray, new condition. Grinding wheel diameter 300mm, 1.8kw Special price

Universal riener, double riening machine, brake coating riener e.g. for rivets of couplings or brake belhighs Adjustable distance Ideal for faithful restoration and maintenance of classic cars Rest according to photos Special price

Roll-up station 0422 year 1996; ready for operation

Double grinding bracket, knife grinding machine Turning one side quickly, the other side running slowly in the water, e.g. for grinding knives Grinding wheel diameter approx. 300mm Weight approx. 250kg Ready to demonstrate under electricity. Special price

wire diameter: 3,0 - 5,5 mm nail length: 15 - 80 mm output: 150/300 St./min. -for steel pins-; very good

CNC double-staender coordinate drilling rig with deep drilling support Kolb KBN G 120 year 1984 / Converted to Heidenhain TNC 426 in 2006 table size 4250 x 2200 mm Table load 14 t Table laengsweg X 3000 mm Main Spindle crosspath Y 2180 mm deep drilling spindle crossing path A - 2000 mm spindle vertical path 500 mm Distance between the stems 2640 mm; spindle - table 100 - 1300 mm; spindle diameter 224 mm Spindle drive power 46 kW spindle speeds 14 - 1400 rpm spindle holder ISO 50 Drilling in steel ST60: 100 mm diameter; drill up to 300 mm; threaded cutting up to M 125 x 3; frard power 730 cm3r/min.; SECOND SUPPORT SUPPORT: spindle speeds at BTA and ELB drilling 315 - 3150 rpm high high pressure oil Offer number V(B)-5234; Very good

CNC Double column Coordinate Boring Machine with Deep Hole Drilling Support Kolb KBN G 120 Year of manufacture 1984 / Retrofitted with Heidenhain TNC 426 in 2006 Table size 4250 x 2200 mm Table load max. 14 t Table longitudinal travel X 3000 mm Main spindle cross travel Y 2180 mm Deep hole drilling support cross travel A - 2000 mm Spindle vertical travel Z 500 mm Distance between the columns 2640 mm; Spindle to table 100 - 1300 mm; Spindle diameter 224 mm Spindle drive motor rating 46 KW Spindle speeds 14 - 1400 rpm Spindle taper ISO 50 Drilling in steel ST60 : 100 mm diameter; Boring to 300 mm; Threading to M 125 x 3; Milling capacity 730 cm³/min.; Second support for Deep Hole Drilling Spindle speeds for BTA and ELB boring 315 - 3150 rpm High pressure cutting oil delivery to spindle Chip- and oil collection and separation via Centrifuge. Very good condition P ...

Folding machine RAS 22.11 - see pictures, Stand fold / double-standing fold

Collar shelving, double-sided, 5, 18 m high, 1, 20 m arms, 500 kg per arm - new -: Price from site including loading! 1 shelf unit with 4 stand EUR2.295.-(net)! A cantilever rack system, hot-dip galvanized, consisting of: 4 shelf stand double-sided measures 5.18 m, hot-dip galvanized IPE 180 / 80 with each 2 x 3 verstellb. Poor 1.20 m, 500 kg load capacity per arm with associations about 1.30 m Shelf stand double-sided about 5180 mm high, hot-dip galvanized Foot and arm depth 1200 mm with 3 adjustable shelf arms Load capacity at load Centre 600 mm 500 kg each arm / 2610 kg per stand with longitudinal and diagonal associations e = 1300 mm When a shelf set with 4 stands approx. 4000 mm long with all bolts and nuts, without ground anchor. Other configurations (frame height, arm length, arm types etc.) can be selected. Please speak to us! Photos of a similar rack!

automatic double mitre saw OMS SALVARANI INVINCIBILE OK 330 CE standard : Yes n.02 motors . power Hp 3 each one blades diam.mm.330 max. useful cutting length mm.3000 max. useful cutting width 90° mm. 165 max. useful cutting width 45° mm. 115 max. useful cutting heigth mm.115 volt. 380/50 weigth kgs.650

Collar shelving, double-sided, 4, 16 m high, 1, 20 m arms, 500 kg per arm - new -: Price from site including loading! 1 shelf unit with 4 stand EUR1.850.-(net)! A cantilever rack system, hot-dip galvanized, consisting of: 4 shelf stand double-sided about 4, 16 m high, hot-dip galvanized IPE 160 / 80 with each 2 x 3 verstellb. Poor 1.20 m, 500kg load capacity per arm with associations about 1.30 m Shelf stand double-sided about 4160 mm high, hot-dip galvanized Foot and arm depth 1200 mm with 3 adjustable shelf arms Load capacity at load Centre 600 mm 500 kg each arm / 2250 kg per stand with longitudinal and diagonal associations e = 1300 mm When a shelf set with 4 stands approx. 4000 mm long with all bolts and nuts, without ground anchor. Other configurations (frame height, arm length, arm types etc.) can be selected. Please speak to us! Photos of a similar rack!

Working range: tube Ø 21,3 – 114,3 mm Wall thickness 2,3 - 11 mm Length: 6-12m Composed of two RFA14 chamfering machines with transport devices between the machines. The task of machines is to chamfer inside and outside both ends of the tubes. The range of diameters of chamfered tubes 21.3-114,3mm and wall thickness of 2.3-11mm in the length range of 6-12m. The task of transport in the area of the chamfering machines is to collect the tubes from the roller table and move them between the chamfering machines. Machine is new, never used.

Collar shelving, double-sided, 3, 50 m height, 1, 20 m arms, 500 kg per arm - new -: Price from site including loading! 1 shelf unit with 4 stand EUR1.750.-(net)! A cantilever rack system, hot-dip galvanized, consisting of: 4 shelf stand double-sided 3, 50 m high, hot-dip galvanized IPE 160 / 80 with each 2 x 3 verstellb. Poor 1.20 m, 500kg load capacity per arm with associations about 1.30 m Shelf stand double-sided approx. 3500 mm high, hot-dip galvanized Foot and arm depth 1200 mm with 3 adjustable shelf arms Load capacity at load Centre 600 mm 500 kg each arm / 2250 kg per stand with longitudinal and diagonal associations e = 1300 mm When a shelf set with 4 stands approx. 4000 mm long with all bolts and nuts, without ground anchor. Other configurations (frame height, arm length, arm types etc.) can be selected. Please speak to us! Photos of a similar rack!

Collar shelving, double-sided, 3, 50 m height, low-1, 20 m, 750 kg per arm - new -: Price from site including loading! 1 shelf unit with 4 stand EUR1.900.-(net)! A cantilever rack system, hot-dip galvanized, consisting of: 4 shelf stand double-sided 3, 50 m high, hot-dip galvanized IPE 160 / 100 with each 2 x 3 verstellb. Poor 1.20 m, 750kg load capacity per arm with associations about 1.30 m Shelf stand double-sided approx. 3500 mm high, hot-dip galvanized Foot and arm depth 1200 mm with 3 adjustable shelf arms Load capacity at load Centre 600 mm 750 kg each arm / 2250 kg per stand with longitudinal and diagonal associations e = 1300 mm When a shelf set with 4 stands approx. 4000 mm long with all bolts and nuts, without ground anchor. Other configurations (frame height, arm length, arm types etc.) can be selected. Please speak to us!

Double crankshaft mechanical press RAVNE DE 315 2 crankshaft, closed type, simple action press DE 315 Manufactured by Zelezarna Ravne, Yugoslavia Press is in excellent working condition, has moving table and hydro cushion YOM 1990 Description Capacity 315 tons Slider stroke 400mm Number of strokes per minute 18 Table dimensions 2500 x 1400 mm Slider dimensions 2500 x 1400 mm Distance adjustment between table and slider 250mm Distance between table and slider in its lower and upper adjustment position 700mm Force of hydro cushion 8 tons Stroke of hydro cushion 155 mm Weight 75 tons

P108 - used approx. 40 m³ / 40,000 litres polyester tank / GRP tank, double-skinned, flat bottom tank, Speidel tank, including as new ullage device(approx. one year). Manufacturer Speidel, aboveground storage tank, vertically standing on flat bottom, in good condition. volume: approx. 40 m / 40,000 litres material: polyester / GRP diameter: approx. 3.00 m height: approx. 6.50 m year of construction: 2001 Double-skinned, for media with a specific weight of up to 1.4 kg / litre. The container can be used as a storage tank for many different media. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us  ...

Many thanks for your interest on our second hand machines, please find follow our offer: manufacturer: Werner & Pfleiderer Type: Double Z Kneader UK11 with hand tilting imensions pot: 400x400x330mm (lxbxh) Utilizable contents: ca. 40 l Gesamt / 30kg Teig imensions: 1700x1300x1650mm (l/w/h) Weight: ca. 530 kg different: - hand tilting - standard steel construction We offer this machine in 'as is' condition, without warranty, ex warehouse (Incoterms EXW and without packaging. ex Warehouse Hess. Lichtenau, (EXW)unpacked

Many thanks for your interest on our second hand machines, please find follow our offer: manufacturer: Werner & Pfleiderer Type: UK 14 ½ Doppel-Z – Kneter Utilizable contents: approx. 350 l Weight: approx. 2.800 kg different: - machine need New painting, mechanical and electrical contoling before work - product touching parts in stainless steel - double jacked for heating - motorized tilting about the front axle with tilt motor - Working hours approx 2947 (read from counter) We offer this machine in 'as is' condition, without warranty, ex warehouse (Incoterms EXW and without packaging. EXW - ex Warehouse Hess. Lichtenau, unpacked

Cutting capacity round / square 90°: 255 mm / 210 x 210 mm 90° flat cutting area: 310 x 210 mm Cutting capacity round / square 45 ° R: 220 mm / 210 x 210 mm Section flat 45 ° r: 220 x 200 mm Cutting capacity round / square 45 ° L: 230 mm / 200 x 200 mm Cutting capacity 45 ° L: flat 230 x 200 mm Cutting capacity round / square 60 ° R: 135 mm / 135 x 135 mm Section flat 60 ° R: 135 x 135 mm Working height: 930 mm Band saw blade dimensions: 2750 x 27 x 0,9 mm Cutting speed: 35 / 70 m / min Coolant pump: 100 W S1 motor power output 100%: 1.5 kW Motor power S6 40%: 2.2 kW Voltage: 400 V Machine dimensions (L x D x H): 2000 x 1250 x 1900 mm Approximate weight: 350 kg Features: -Professional band saw for General workshop use, fitters... -For cutting of hollow profiles and full materials, stainless steel, tool steel,... -Twist-free, heavily dimensioned saw frame mad ...

Double swivel crane Saleg swivel crane Zasche GSX 2x500-4,5 Complete Saeule + 2x swivel arm + 2x chain hoist Crane hook height 3.5m / swivel arm length 4m Saeule with 2 swivel arm holders each 500kg load capacity Stroke designation RUDK / ub speed 4 m/min Total usage 611 hours / usage reserve 988 hours

Effort 500t Slide stroke 500mm Number of strokes per minute 20 Slider dimensions 3840 x 2290 x 2360mm Slider weight 17 300kg Adjustment of the distance between the slider and the table 500mm Max. open press height 1300mm Max. open die height 1280mm Min. Closed height of press 800mm Min. closed die height 820mm Height of sliding table 500mm The maximum force of 3 pillows of pressing 100t Cushion plate stroke 200mm Main motor power 75 kW Number of sliding tables (sideways movement) 1 Number of additional drawers 1 Press weight 136,700kg

moving bolster Capacity, ton 500 Centers of pressure 2 Idle stroke rate 20 Distance between the uprights, mm 2800 Shut height, mm 1100 Table dimensions, mm 2800 x 1800 Table gap, mm 2400 x 1250 Ram dimensions, mm 2800 x 1700 Ram stroke, mm 500 Ram adjustment, mm 500 Die cushion adjustment, mm 200 Die cushion stroke, mm 200 Die cushion capacity, ton 100 Main motor power, kW 75 Press weight, kg 120000

Capacity 500 tons Speed 20 spm Bed area 2800 x 1800mm Ram area 2800 x 1700mm Stroke 500mm Die height 1100mm SDAU weight 130 tons

Double chamber furnace, make VEI-Engineering type: KA_GB 10.14.14/d max. temperature: 550°C fan power: 2 x 4 kW heating: natural gas burners power: 2 x 100 kW useable dimensions per chamber width: 1.000 mm height: 1.400 mm depth: 1.400 mm

all stainless steel capacity 300 L. (= ± 10CF) Double Ribbon mixing arm Dimensions: (l x w x h) : ± 1.900 x 670 x 1.740 mm (open lid : ± 2.140 mm) outfeed height : ± 720 + 20 mm safety lid CE-approved 2 speeds: 16 en 32 rpm 2 mixing directions 5,5 kW Digital – touch screen with programs Perfectly suitable for dry products, such as: herbs, ingredients, powders,…

Double Z Kneaders / Sigmakneter -Make unknown, built CA. 1960 -Refurbished in 2018 -Electric motor VEM 4 / 6 KW pole shift bar, 2 speed 1445 / 720 rpm, 11/12 A -Belt drive - 2 Z Wave -All wetted parts in stainless steel -Single-walled tank approx. 700 760 500 mm approx. 250 litres - volume = approx. 150 litres -Floor outlet with spindle and Handwheel -Weight approx. 1200 kg -Overall dimensions approx. 1400 1500 1700 mm -Very stable and very good condition

Double shaft grinder of August jade Maschinenfabrik Frauenfeld Built in 1940 Weight approx. 1100 kg L x W x H: 150 x 80 x 110 cm The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

pressure:1000 t stroke:800 mm total power requirement:45 kW weight of the machine ca.:97 t dimensions of the machine ca.:4500 x 4400 x 5300 m Return Capacity:40 t Main Cylinder:(d=500mm) 2 Stück :(140 x 80mm) 2 Stück speed of forward flow:40 - 110 mm/sec Return Speed:150 mm/sec Press speed (infinitely variable via PLC):3 - 12 mm/s Table size:3000 x 2300 x 200 mm Ram plate:3000 x 2300 x 1000 mm demand for oil:ca. 1300 l :210 l/min :600 sec :1500 x 150 mm Hydraulic and mechanical protection of the plunger Two-piece auxiliary motors with 2.2 kw Two-piece auxiliary pumps with a power of 6 L/min. Concurrency monitoring (0.5 mm/m²) Fast forward speed adjustable via plc Maximum deflection of the table at 0, 07mm/m²

pressure:200 t distance between columns:1200x1000 mm stroke:600 mm total power requirement:32,5 kW weight of the machine ca.:20,5 t dimensions of the machine ca.:4000x2600x5000 m draw back pressure:20 t Master cylinder:1 Stück voltage:400 V frequency:50 Hz :24 V :BOSCH/REXROTH dayligth:800 mm :1200x1000 mit T-Nuten nach Kundenwunsch DIN 650-22 mm work height max.:1100 mm pre-running speed:170 mm/sec return speed:150 mm/sec Speed printing phase:15 mm/sek. Hydraulic block:REXROTH demand for oil:500 l pressure control:über PLC (Mindestdruck 20t) Oil Cooling:elektrisch :220 (im Schaltschrank) V memory:200 Programme :über Monitor von 20-200 t Controll:Zweihandbedienung beweglich :2-10 mm/sec :0-10 sec

pressure:160 t distance between columns:700 mm stroke:400 mm Return Capacity:16 t Engine Output:15 kW Travel:400 mm :600 mm Ram plate:700 x 600 mm table height over floor:850 mm Table size:700 x 600 mm speed of forward flow:10 mm/sec Pressing speed:10 mm/sec :10 mm/sec Oil cooling (electric):1,5 kW (max) Oil Tank Capacity:300 l weight of the machine ca.:4,2 t dimensions:950 x 2440 x 2400 m ejector:30 x 30 mm ejector stroke:150 mm pressure of ejector:15 t ejector speed:25 mm/sec no. of ejector pins:1 Stück heating plates :550 x 500 mm :6800 ? :2400 ? :1200 ? :1200 ?

pressure:160 t distance between columns:700 mm stroke:400 mm Return Capacity:16 t Engine Output:15 kW Travel:400 mm :550 mm Ram plate:700 x 600 mm table height over floor:900 mm Table size:700 x 600 mm speed of forward flow:50 mm/sec Pressing speed:10 mm/sec :50 mm/sec Oil cooling (electric):1,5 kW (max) Oil Tank Capacity:300 l weight of the machine ca.:4,3 t dimensions:1150 x 2600 x 2400 m ejector:30 x 30 mm ejector stroke:150 mm pressure of ejector:15 t ejector speed:25 mm/sec no. of ejector pins:1 Stück Heating panels (L x B) with 2 measuring sensors diagonally:550 x 500 mm Siemens Control System:S7 1200 Monitor:12 Zoll :2400 ? :1200 ? :1200 ?

pressure:100 t distance between columns:1000 mm stroke:500 mm Return Capacity:10 t Engine Output:10 kW :700 mm Ram plate:1000 x 700 mm table height over floor:1000 mm Table size:1000 x 700 mm speed of forward flow:10 mm/sec Pressing speed:10 mm/sec Return Speed:25 mm/sec :10 mm/sec Oil cooling (electric):1,5 kW (max) Oil Tank Capacity:300 l weight of the machine ca.:6 t dimensions:3100 x 1000 x 2900 m

Double circular saw cross cut Rüco L x W x H: 6 x 3 x 1.2 m Weight approx. 1.5 to Built in 1969 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12