double wall used for sale

S5 - used 50m³ / 50,000 litres steel tank, double-walled, underground tank, firefighting water tank, water cistern. In good condition, underground or aboveground tank, steel storage tank, water reservoir. Surface coated with bitumen insulation / bitumen painting. capacity: approx. 50m³ / 50,000 litres material: steel tank / underground tank, double-walled manufacturer: Mannesmann dimensions: approx. Ø 2.5m x 10.0m long weight: approx. 8.0 - 10.0 tons The steel tank is used, has been emptied and professionally cleaned inside. According to the age there are traces of use. This container can serve as a storage tank for water, waste water, sewage, manure, seeping juice, rapeseed oil, or as rainwater collection tank, water cistern, firefighting water tank etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your dem ...

S6 - used approx. 1.5 m³ / 1,500 litres steel tank on wooden skids, double-walled, in good condition. Storage container, water tank, firefighting water tank, diesel fuel tank, heating oil tank. capacity: approx. 1.5 m³ / 1,500 litres material: steel, double-walled diameter: approx. Ø 1.0 m length: approx. 2.1 m overall height: approx. 1.2 m incl. skids The steel tank is used, has been emptied and professionally cleaned inside. According to the age traces of use are present. This container can be used as a storage tank for many different media. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please ...

S20 - used approx. 40 m³ / 40,000 litres steel tank, double-walled, coated inside, incl. 2 bases, dome shaft, railing and ladder. technical details: capacity: approx. 40 m³ / 40,000 litres material: steel tank double-walled DIN6616/2 weight: approx. 7 t dimensions: approx. Ø 2.50 m x 8.70 m long Includes 2 bases, a prefabricated dome shaft made of steel in accordance with DIN 6626 as well as a railing and ladder, as shown in the pictures. The dome shaft, the railing and the ladder had to be dismantled for transport and cut off at the top, but are included in the delivery. The customer has to refit and weld these attachments himself on site. Upon request and at additional cost we can also supply a propeller agitator. Used steel storage tank in very good condition, outside painted in silver, coating on the inside, former glycol tank, with 2 dome shafts and connection ...

P181 - used approx. 40 m³ / 40,000 litres PE-HD-tank, plastic tank, flat bottom tank, double-walled with an outer hull. specifications: capacity: approx. 40 m³ / 40,000 litres material: PE-HD tank, plastic tank manufacturer: Formoplast Kunststofftechnik GmbH measurements: Ø approx. 3,49 m outside / Ø approx. 3,00 inside x height tank approx. 5,70 m / total height approx. 6,50 m mark of conformity: PA-VI 321.103 specific weight: 1,13 kg/L media: former chemical tank for formalin DIBT and media list available, suitable for AHL and ASL PE-HD tank, professionally cleaned and in good condition. Double-walled, i.e. with an outer hull, non-translucid, various connections such as ventilation, inlet, suction pipe, etc., lid on top of the roof. According to the media list suitable for many different chemicals e.g. iron chloride, hydrochloric acid, acetic acid, caustic soda, sul ...

Cylindrical storage tank, factory new Capacity: 60 cbm / Medium: Fuel oil Material: S235JR (St 37.2) raw inside, blasted outside, primed and painted in RAL 7035 - light grey Dimensions: 2,500 mm diameter, 12,650 mm full length Design: according to DIN 6616/2 or DIN EN 12285-2, double-walled Test pressure inner tank 2 bar test overpressure Double jacket 0.6 bar incl. control fluid in double jacket for above-level storage with test certificate and documentation Container equipped with GOK Lag 2000 and limit sensor as overfill protection Equipment: 1 dome 600 mm li.W. with cover, gasket and screws 3'' filling cable with TW coupling 3'' Vent with cap 1 1/4'' Suction line with reduction to 1'' 1'' for limiter GWG 23-Ro 1'' nit dipstick 2'' reserve 1 pair of permanently welded steel saddle feet 1 suspension ladder with pedestal, galvanized according to UVV  ...

Service station - Hoftankstelle - Diesel filling station with 5,000 litres capacity, brand new, according to DIN 6616/D, above ground, double-walled, incl. test certificate. The container has two saddle feet, a manhole with dome lid and is fitted with the following fittings Equipped: 1 filling tube with TW-cap (filling cap) and immersion pipe, 1 bearing pipe with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand-new limit sensor with type-approval (AIII), 1 conductor and 1 spare sleeve for extraction purposes, 1 optical leak detector with type approval and leakage liquid. The container is primed on the outside - on untreated sheets. L = approx. 2.80 m - D = 1.60 m - weight approx. 1.5 to. - ex works, freely charged - We recommend: Above containers sandblasting from the outside, prime and completely repaint - dark grey / RAL hue.  ...

S39 - used approx. 60 m³ / 60,000 ltr double-walled steel tank, heating oil tank, water tank, fire fighting tank, water cistern. technical details: capacity: approx. 60 m³ / 60,000 ltr material: steel tank, double-walled, DIN 6616D/6601 manufacturer: Dehoust year of construction: 2007 factory no.: 17/07512 weight: approx. 11 t dimensions: Ø approx. 2.90 m × L approx. 9.52 m × total H approx. 3.30 m Other: Used, in good condition, above-ground storage tank, steel tank on 2 steel bases attached to the tank, former heating oil tank, lid and connections on top of the tank body. The container has been emptied and professionally cleaned inside. According to age, traces of use are present. The container can be used as a storage tank for water and many different media. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your d ...

Double-walled steel tank. Price is negotiable. Shipping possible. The sale is carried out on behalf of the customer. Prior sale and error excepted. The terms and conditions of Cleantec-MR apply.

UNI-KK 0-031-500 Dimensions: Cylinder length: 9.97 m Diameter 2.50 m Total length: 10,80 m Material: Material: Steel Tank above: - with manhole Dom 600 - with 2 crane eyelets - Leak control system with leak connections complete - with ventilation Cylinder: - 2 saddle plates - with Klöpperboden

Fire water tank, rainwater tank, underground Double-walled steel tank with a volume of 50,000 L Dimensions: Ø 2.50 m × 11 m long

Fire water tank, rainwater tank double-walled steel tank with a volume of 30,000 L Dimensions: Ø 2.50 m × 10 m long

P409 - used approx. 25 m³ / 25,000 litres HDPE tank, plastic tank, double-walled, flat bottom tank. technical details: capacity: approx. 25 m³ / 25,000 litres material: HDPE tank, plastic tank manufacturer: Formoplast specific weight: min. 1.55 kg/L dimensions: approx. Ø 3.49 m × H total 4.50 m test mark: PA-VI 321.103, DIBT and media list available, AHL/ASL listed Miscellaneous: Used HDPE tank in good condition, cleaned inside, uncleaned on the outside. Above-ground storage tank for outdoor use, standing on a flat floor, double-walled, lid on top of the roof, several inlets and outlets. Only the tank itself is being sold, without attachments such as pipes, fittings and accessories. This container can be used as a storage tank for many different media. Former tank for 40% ironIIIChloride, DIBT and media list available. Sulfuric acid tank, hydrochloric acid tank, bleach ...

P427 - used approx. 30 m³ / 30,000 litre HDPE tank, plastic tank, double-walled, flat-bottom tank. Technical details: Content: approx. 30 m³ / 30,000 litres Material: HDPE tank, plastic tank Manufacturer: Formoplast Specific gravity: min. 1.55 kg/L Dimensions: approx. Ø 3.49 m × H total approx. 5.50 m Certification mark: PA-VI 321.103, AHL/ASL listed Other: Used HDPE tank in good condition, inside professionally cleaned, from the outside as shown in the pictures. Above-ground storage tank for outdoor installation, standing on flat floor, double-walled with outer tub, dome on top of the roof, several inlets and outlets, opaque, incl. railing on top of the roof. Only the pure tank is sold, without add-on parts such as pipes, fittings and accessories. If the ladder fits on the truck, it can be supplied. This container can be used as a storage tank for many different media ...

Double office container 2x 20 in the middle no wall, longitudinal door, front and rear double windows, partly wooden shelves, furniture, apparently tight

Double-walled diesel tank 2000 liter capacity. Equipped with pump (56l. Per minute) Auction-ID: A1-47381-140

The high-load timber-beam formwork with a system grid The pre-assembled standard elements of Doka timber-beam formwork FF20 combine the advantages of timber-beam formwork with the grid-related advantages of a framed formwork system. Their very high load-bearing capacity offers a new degree of freedom when it comes to fulfilling architectural specifications in a cost-effective way. FF20 is suitable for fair-faced concrete categories SB1 to SB4, as defined in the DBV Code of Practice. High pouring rates made possible by extra-strong components Up to a pour-height of 3.60 m, only two 20.0 form-ties are needed, thanks to the 80 percent higher load capacity of the I tec 20 composite formwork beam compared to conventional H20 timber formwork beams the stiff FF20 tec walings WU14, with their welded-on plates Maximised utilisation of equipment and ease of handling Lowers commiss ...

Precast - Wall - Filigree - factory. Good as new circulation system: 60 pallets with 3.5 mx 8 m, 3 x lateral transport of pallets - Facilities, 1 x vibrated concrete station, new control - Beckhoff. Concrete distributor Crane 1.4 m³. Friction wheels. Roller blocks. Planning and installation as required. Formwork on request. Is dependend on the application. For low cost housing, cmodul austria low cost housing Affordable housing Low-cost housing Mixing system 1 m³ at extra charge. Tilting device if needed for concrete slabs vertical-tansport at extra charge. Cran for stock handling at extra charge. Projects for social housing are our daily work. Civil work plans, drawings and calculations, we can create for you. Similarly, profitability calculations.

Producer: IGLOO Type: MILOSZ 2/1.0 Length x width x height: 1000 x 630 x 1145 mm Power supply: 230 V Cooling wall shelf IGLOO type MILOSZ 2/1.0 with aggregate exterior Ask for an offer iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36

Halls solid sheet metal partitions 10.20 x 10.90 meters Solid sheet metal partition walls can be used for the subdivision of hall areas into industrial halls and warehouses, but also for halls with production processes. They are used wherever separate work areas are necessary, or where work areas have to be closed off or separated. The flexible system has a modular design and enables fast assembly and thus a short-term implementation of your project Mass: HxDxW = 3.60 x 10.20 x 10.90 metres Double wing door width 2.30 metres Further storage technology - new and used - can be found in our shop! International shipping costs on request!

We offer the following Doka Framax elements: Doka Framax Xlife 1.35 x 1.35m with 75% discount = 274,50€/pc net. 64 x Framax Xlife element 1.35x1.35m Accessories available on request. Formwork completely cleaned, inspected and sorted. Formlining fair-faced concrete class 2/3 possible without any problems. Out-of-the-box, suitable for higher-value use. If you have any questions, please contact Mr. Becker on 0049 176 70044689 purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Master Craftsman Company Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 Mobile: 0049 176 70044689 Mr. Becker Office/ Warehouse Address: Birkenstraße 15 89185 Humlangen- Hüttisheim E-mail: sfsystemst-online.de Ulm Registry Court: HRA722943 VAT NUMBER: DE279047055

- Crankc. end Cover End Wall Cover MWM 12302284 - Suitable for several motors - Please note! Price per piece! - 12302284 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting  ...

Wall swivel crane Payload 250 kg Lifting height 5,000 mm Extension 6,500 mm Hallway control Electricallifting/Lowering Lifting speed 10 /2.5 m/min. Connection 380 Volt

arm length: 4000 mm weight max. in kg: 500 kg swivelling range: . Grad total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 44 with wall bracket The techn. Data are manufacturer or operator information and are therefore not binding for us. We reserve the right to prior sale, only our terms and conditions apply. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

We offer a refurbished Peri Trio 270 formwork 198.28m² complete with accessories as follows. Frame cleaned, corrosion sealed with zinc phosphate coating. New original Peri Finply formlining. Accessories new, or Peri rental storage quality. New value approx. 145766,50€ Special net price 64706,00€ approx. 56% discount Pcs. Description 16 Element TR 270 x 240 new frames, new formlining 8 Element TR 270 x 120 new formlining 8 Element TR 270 x 90 new formlining 4 Element TR 270 x 72 top used formlining 4 multi-purpose elements TRM 270 x 72 new formlining 10 Element TR 270 x 60 new formlining 8 Element TR 270 x 30 new formlining 2 stripping elements TR 270x 24 new formwork lining 6 Corner TE 270-2 new formlining Accessories TRIO 130 Richtschloss BFD, verz. 30 TAR 85 compensating bolts 16 Scaffolding bracket TRG 80 2 Moving hooks MAXIMO 1.5 t new 1 new MX trans ...

MAX. OUTER TUBE DIA. 85 MM

Framax Xlife-Uni-Element SCC 0.90x2.65m with 70% discount - custom order Original price: 2685,00€/pc Discount: 70% Special net price: 805,50€/pc 8 units in stock Accessories available on request. Formwork completely cleaned, checked and sorted. Formwork lining fair-faced concrete class 2/3 possible without any problems. Ready to use, suitable for higher-value applications. If you have any questions, please call 0049 176 70044689 Mr. Becker Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 mobile: 0049 176 70044689 Mr. Becker Office/ Storage Address: Birkenstraße 15 89185 Humlangen- Hüttisheim E-mail: sfsystemst-online.de Ulm Registration Court: HRA722943 VAT ID NUMBER: DE279047055

We offer a Doka Framax Xlife plus 330 package 225.72m². Formwork cleaned, checked. Formlining SB 2/3 Original Doka Xlife formlining, ready for immediate use. New value PL 2025/ 26 Doka 232312,00€ Special net price with 80% discount = 46462,00€ 16 589292600 Framax Xlife plus Element 0,90x3,30m 24 589293600 Framax Xlife plus Element 0.75x3.30m 24 589294600 Framax Xlife plus Element 0.60x3.30m 32 589295600 Framax Xlife plus Element 0.45x3.30m 24 589296600 Framax Xlife plus Element 0.30x3.30m Offer only valid while stocks last. Subject to prior sale. If you have any questions, please call 0049 176 70044689 Mr. Bdcker Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 mobile: 0049 176 70044689 Mr. Becke ...

Relay, contactor, semiconductor contactor, contactor -Elero: Uni-Tec 868 wireless wall transmitter -Application: roller shutters, awnings blinds, special applications -Price: per piece -Number: 1 pieces -Dimensions: 81x81x22 mm (LxWxD) -Weight 0.1 kg/piece

18 transport pallets for concrete walls or similar and 1 pallet lifter

The scope of delivery includes: 01x rear wall grille, used Material color: sendzimir galvanized Total width: approx. 2,700 mm Total height: approx. 1,500 mm Mesh size: approx. 103 x 53 mm Mesh size (elevation): approx. 53 x 53 mm Frame profile illustration: L approx. 30 x 30 mm Wire thickness: approx. 1.75 mm Hole diameter: approx. 7 mm Hole grid spacing: approx. 25 mm Weight/ pcs.: approx. 10,40 kg

arm length: 4000 mm weight max. in kg: 1000 kg swivelling range: mindestens 160 Grad height: 4000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Schneider Automatic Demga Hoist 500 KG The techn. Information is provided by the manufacturer or operator and is therefore non-binding. We reserve the right to prior sale, Our terms of sale apply exclusively. About us More than 400 of our own machines in the warehouse More than 12,000 m² of storage space, crane capacity 70 t More than 1000 items Accessories for your workshop If you want to sell machines, systems or your company, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The scope of delivery includes: 01x Rear wall grille, used Material color: creamy white overall width: approx. 2,200 mm total height: approx. 1,200 mm Mesh size: approx. 60 x 50 mm Frame profile abm. (width): approx. 20 x 20 mm Frame profile abm. (height): approx. 15 x 15 mm Wire thickness: approx. 3.00 mm Weight/ pcs.: approx. 8,14 kg Internal designation: RW-2

socket, switch socket, wall socket -Manufacturer: Mennekes, CEE socket switchable unused Ovp -Type: 5103 AE -Quantity: 15 x wall socket available -Price: per piece -Price/Delivery: complete -Dimensions box: 300/170/H140 mm -Weight: 1.2 kg/piece

Sell Carat wall saw type W3011. Blade diameter: 300mm The machine is in good condition, functional and tested.

Socket outlet, flush-mounted boxes, touch-protected boxes, Schuko socket, explosion-proof wall socket -Manufacturer: CEAG, Ex-wall socket 220-240V 16A unused original packaging -Type: GHG5114306R0001 -Number: 1x power outlet available -Carton dimensions: 290/110/H175 mm -Weight: 1.1 kg

Socket outlets, flush-mounted boxes, touch-protected boxes, Schuko sockets, explosion-proof wall sockets, power connectors -Manufacturer: CEAG, Power connector EX plug 16A 3-pole unused original packaging -Type: GHG5117306R0001 -Number: 1x power outlet available -Cardboard dimensions: 200/95/H100 mm -Weight: 0.3 kg

We offer: 1 used rear wall grille Dimensions: approx. 2,700 x 850 mm There are 15 pieces in stock 21698 Harsefeld Per piece € 80,00 net plus 19 % VAT ex stock 21698 Harsefeld. Price only valid while stocks last. Subject to changes and errors. We are a professional provider – invoice with VAT shown.

CEE wall socket -Construction -5 pole -Type: GHG 531 4506 V0000 -EX Protected -Weight: 0.5 kg

We offer a refurbished Peri Trio 330 - 126.52m² with 65% discount - newly occupied Frame cleaned, corrosion sealed with zinc phosphate coating. New original Peri Finply formlining. Accessories new, or Peri rental storage quality available on request. New value approx. 72,134.00€ Special net price: 25.246,90€ Pcs. Description 10 Elements TR /4 330 x 240 - New Plate 7 elements TR /4 330 x 120 - new plate 3 elements TR /4 330 x 90 - new plate 2 elements TR /4 330 x 72 - new plate 2 elements TR /4 330 x 60 - new plate 2 elements TR /4 330 x 30 - new plate If you have any questions, please call 0049 176 70044689 Mr. Becker Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 mobile: 0049 176 70044689 Mr. ...

arm length: 6000 mm weight max. in kg: kg swivelling range: Grad height: 3800 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Lifting height 3800 mm Crane number 1.26 The techn. Information is provided by the manufacturer or operator and is therefore non-binding. We reserve the right to prior sale, Our terms of sale apply exclusively. About us More than 400 of our own machines in the warehouse More than 12,000 m² of storage space, crane capacity 70 t More than 1000 items Accessories for your workshop If you want to sell machines, systems or your company, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

arm length: 5500 mm weight max. in kg: 250 kg swivelling range: Grad height: 3800 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Lifting height 3800 mm Crane number 1.23 The techn. Information is provided by the manufacturer or operator and is therefore non-binding. We reserve the right to prior sale, Our terms of sale apply exclusively. About us More than 400 of our own machines in the warehouse More than 12,000 m² of storage space, crane capacity 70 t More than 1000 items Accessories for your workshop If you want to sell machines, systems or your company, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

We offer a Doka Framax 270 wall formwork 260.15m² complete with accessories on request. New value of the formwork 188407,00€ Special net price 58545,00€ Accessories 14756,00€ New value approx. 31880,00€ The formwork was cleaned and checked. Partly new formlining. Original Doka rental warehouse quality Item No. Description 3 588103500 Framax Xlife element 2.40x2.70m 36 588100500 Framax Xlife element 1.35x2.70m 10 588122500 Framax Xlife-Uni-Element 0.90x2.70m 3 588122500 Framax Xlife-Uni-Element 0.90x2.70m 7 588102500 Framax Xlife element 0.90x2.70m 6 588104500 Framax Xlife element 0.60x2.70m 8 588105500 Framax Xlife element 0.55x2.70m 5 588106500 Framax Xlife element 0.45x2.70m 16 588108500 Framax Xlife Element 0.30x2.70m 1 588108500 Framax Xlife element 0.30x2.70m 12 588130500 Framax Xlife inner corner 2.70m 12 588126000 Framax outer corner 2.70m On ...

Wall Pliers STEINWEG

arm length: 5000 mm weight max. in kg: 500 kg swivelling range: Grad height: 3800 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Lifting height 3800 mm Crane number 1.35 The techn. Information is provided by the manufacturer or operator and is therefore non-binding. We reserve the right to prior sale, Our terms of sale apply exclusively. About us More than 400 of our own machines in the warehouse More than 12,000 m² of storage space, crane capacity 70 t More than 1000 items Accessories for your workshop If you want to sell machines, systems or your company, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used rear wall grille for pallet racks - approx. 1,500 x 2,780 x 30 mm Used lattice back panel from a pallet rack in very good condition. With this lattice rear wall, you can secure walkways and driveways behind a pallet rack against falling stored goods. However, they can also be used for other applications, such as safeguarding machines or workplaces. These grids are also often used to demarcate storage areas or picking stations. Properties: - Used back wall grid for pallet racks - For securing running areas - Dimensions: 1,500 x 2,780 x 30 mm - Mesh size: 45 x 45 mm - Frame painted in blue - In very good condition - Available or ready for pick-up by arrangement Properties: Frame color: blue Grid: galvanized Mesh: 45 x 45mm Dimensions: Height: 1,500mm Width: 2.780mm Depth: 30mm