double wall used for sale

pressure: 600 t ram surface: 3600 x 2500 mm stroke: 350 mm Control: Siemens S 7 no. of strokes: 11 - 44 Hub/min table surface area: 3600 x 2500 mm ram adjustment: 400 mm material width: 500 - 1950 mm material thickness: 0,6 - 2,5 mm mm coil weight: 35 t coil external diameter: 900 - 1900 mm coil internal diameter: 610 mm no. of straightening rolls: 13 straightening roll diameter: 50 mm Stack height: 400 mm stations: 2 total power requirement: kW weight of the machine ca.: 390 t dimensions of the machine ca.: m with reel, Rstraight out Unit, (conveyor system Schleicher) and stacking unit(NSM) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 40 t distance between columns: 495 mm stroke: 150 mm distance table/ram, max. stroke up, adjustment up: 300 mm table surface area: 490 x 400 mm hole in the table: 50 mm table height over floor: 950 mm column travel -side: 155 mm ram surface: 150 mm feed down: 480 mm/sec feed up: 480 mm/sec working feed: 20 mm/sec oil volume: 115 l power capacity: 7,5 kW weight: 2,2 t dimensions of the machine ca.: 1,35 x 1,00 x 2,21 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 800 t distance between columns: 3550 mm stroke: 1100 mm distance table/ram, max. stroke up, adjustment up: 1900 mm table surface area: 3500 x 1800 mm die-cushion pressure inside the table: 350 t stroke of drawing cushion in table: 295 mm die-cushion pressure in pusher: 80 t stroke of drawing cushion in pusher: 160 mm ram surface: 3500 x 1800 mm die-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled sliding table: without rails for travel total power requirement: kW weight of the machine ca.: 265 t dimensions of the machine ca.: m overhauled in 1998 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 600 t distance between columns: 2600 mm stroke: 900 mm distance table/blankh.,max. stroke up,adjustm. up: 1600 mm table surface area: 2500 x 1730 mm die-cushion pressure inside the table: 250 t stroke of drawing cushion in table: 400 mm die-cushion pressure in pusher: 63 t stroke of drawing cushion in pusher: 150 mm ram surface: 2500 x 1730 mm column travel -side: 1100 mm die-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m overhauled in 2005 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 800 t distance between columns: 2560 mm stroke: 1050 mm control: Siemens S5 distance table/blankh.,max. stroke up,adjustm. up: 1870 mm table surface area: 2500 x 1730 mm die-cushion pressure inside the table: 300 t stroke of drawing cushion in table: 395 mm die-cushion pressure in pusher: 63 t stroke of drawing cushion in pusher: 150 mm ram surface: 200 mm die-cushion in pusher: hydraulic, controlled die-cushion inside the table: hydraulic, controlled total power requirement: 200 kW weight of the machine ca.: 150 t dimensions of the machine ca.: 4,95 x 3,3 x 10,2 m overhauled in 2005 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 1600 t distance between columns: 3160 mm ram stroke: 1450 mm distance table/blankh.,max. stroke up,adjustm. up: 2250 mm table surface area: 4000 x 2200 mm ram pressure: 1000 t pressure of blank holder: 600 t stroke of blankholder at the bottom: 1000 mm stroke of blankholder with adjustment 0-100 mm: 1450 mm blank holder size: 4000 x 2200 mm die-cushion pressure inside the table: 360 t stroke of drawing cushion in table: 275 / 400 mm ram surface: 4000 x 2200 mm column travel -side: 1100 mm die-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled oil volume: 9000 l total power requirement: 390 kW weight of the machine ca.: 250 t dimensions of the machine ca.: 6,0 x 4,3 x 10,5 m Head press (1600 tons) of a press line with five subsequent presses (800 tons) The data for this ad was created with ModulMWS - the software solution of LogoTech o ...

pressure: 500 t distance between columns: 1220 mm max. ram stroke: 600 mm distance table/ram, max. stroke up, adjustment up: 1000 mm table surface area: 1600 x 1200 mm die-cushion pressure inside the table: 320 t stroke of drawing cushion in table: 150 mm drawing cushion surface in table: 750 x 812 mm die-cushion pressure in pusher: 180 t stroke of drawing cushion in pusher: 100 mm drawing cushion surface in pusher: 750 x 625 mm ram surface: 1600 x 1200 mm table height over floor: 800 mm feed down: 665 mm/sec feed up: 530 mm/sec working feed: 34 - 100 mm/sec quantity of oil: 2000 l power capacity: 180 kW weight: 40 t dimensions of the machine ca.: 3,2 x 2,4 x 7,5 m by using oil-hydraulic drive, hydraulic and electric control UVV, die cushion in bed and slide, adjustable drawing speed, punching limit with damping plunger lock, electric cabinet Our list price is WITHOUT starting the machin ...

max. dia. of grinding wheel: 200 mm : 40 mm turning speeds: 1400/2800 U/min voltage: 380 V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

rotary table dia.: mm max. dia. of grinding wheel: mm with manual ongoing: 0 manually feed: 0 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 t distance between columns: 680 mm stroke: 150 mm total power requirement: 15 kW weight of the machine ca.: 7 t dimensions of the machine ca.: 3 x 3 x 3 m No. 0214 ydraulic high-speed double-column press SMG DS 63 Clearance between the uprights 680 mm, max. distance between table top and ram 385 mm, Ejector force 15kN, largest ram stroke 150 mm. Working area: Table surface 660 x 460 Drive: 15 kW pressing force 630 kN, retraction force 51 kN The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 132500 € : 2504.25 € : 200 to : 500 mm : 1250x1000 mm : 600 mm : 25 mm/s : 3,5 mm/s : 7.5 kW : 1550 mm : 1300 mm : 2700 mm 4-pillar guide ram guide round table and ram with T-slots 2 hand operation Siemens PLC manometer users manual OPTIONS: Light barrier € on Request Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Decompression valve € on Request Oil cooler with decompreission valve € on Request Pressur switch € on Request The data for this ad was created with ...

: neu : ca. 2 - 4 Wochen ab Auftr : 4533.22 € : 300 x 40 x 51 mm : 2,2 kW : 1250 1/min : 42 mm : 540 mm : 530 mm : 1180 mm : 800 x 600 x 1400 mm : 90 kg With machine stand, integrated suction, emergency stop pushbutton and brake (Art.317.779) Quiet running, maintenance-free motor Laterally closed protective hoods Stable, adjustable workpiece supports High safety comfort due to adjustable spark deflectors Suitable for grinding, deburring and sharpening all kinds of tools, metal profiles, etc. Motor circuit breaker and undervoltage release Spark/eye protection on both sides Connection cable with CEE plug 16 A 1 grinding wheel each coarse and fine ALTERNATIVE: Version without suction (Art. 317.776) Version without stand, suction and brake/emergancy push button (Art. 317.764) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 - 4 Wochen ab Auftr : Deutschland : 956.67 € : 200 x 32 x 32 mm : 1 kW : 2800 1/min : 42 mm : 250 mm : 470 mm : 230 mm : 325 x 540 x 310 mm Quiet running, maintenance-free motor Laterally closed protective hoods Stable, adjustable workpiece supports High safety comfort due to adjustable spark deflectors Suitable for grinding, deburring and sharpening all kinds of tools, metal profiles, etc. Motor circuit breaker and undervoltage release Spark/eye protection on both sides Connection cable with CEE plug 16 A 1 grinding wheel each coarse and fine 12 months warranty for single shift operation Art.Nr.: 317.762 table version ALTERNATIVE VERSIONS: Art.Nr.: 317.774with machine stand, emergency stop buttom and brake Art.Nr.: 317.777 with MA400D integrated extractor, machine stand, emergency stop buttom and brake The data for this ad was created with ModulMWS - the software soluti ...

: neu : ca. 2 - 4 Wochen ab Auftr : Deutschland : 1896.69 € : 200 x 32 x 32 mm : 1 kW : 2550 1/min : 42 mm : 270 mm : 470 mm : 1050 mm : 600x800x1350 mm : 60 kg Quiet running, maintenance-free motor Laterally closed protective hoods Stable, adjustable workpiece supports High safety comfort due to adjustable spark deflectors Suitable for grinding, deburring and sharpening all kinds of tools, metal profiles, etc. Motor circuit breaker and undervoltage release Spark/eye protection on both sides Connection cable with CEE plug 16 A 1 grinding wheel each coarse and fine 12 months warranty for single shift operation Art.Nr.: 317.774with machine stand, emergency stop pushbutton and brake OPTION (price on request): Footpedal as emergency stop ALTERNATIV MODELS: Art.Nr.: 317.762 table version Art.Nr.: 317.777 with machine stand with integrated suction, emergency stop pushbutton and brake The da ...

: neu : ca. 4 Monate ab Auftragse : Italien : 123000 € : 2324.7 € : 170 to : 500 mm : 1200x700 mm : 600 mm : 110 mm/s : 7 mm/s : 70 mm/s : 19 kW : 2700 mm : 1600 mm : 2650 mm 4-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2025 : 050141 : prompt, Zwischenverkauf v : Polen : 2821.24 € : 1 : 200 x 32 x 32 mm : 1 kW : 2800 1/min : 42 mm : 470 mm : 250 mm : 1050 mm : 60 kg Quiet running, maintenance-free motor Laterally closed protective hoods Stable, adjustable workpiece supports High safety comfort due to adjustable spark deflectors Suitable for grinding, deburring and sharpening all kinds of tools, metal profiles, etc. Motor circuit breaker and undervoltage release Spark/eye protection on both sides Connection cable with CEE plug 16 A 1 grinding wheel each coarse and fine ALTERNATIVES: Version without suction (Art. 317.762) Version without stand, suction and brake/emergancy push button (Art. 317.774) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

IFANGER F 300 ist eine Bandschleifmaschine mit einseitiger Schleifscheibe, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Bearbeitungsdaten: Schleifscheibe Ø 300 mm, Breite 25 mm, Bohrung 25 mm. Technische Hauptdaten: 2 Drehzahlstufen von 1650 bis 2160 t/min; Anschluss 50 Hz, 3x 380 V; Leistung 0,73 kW; Maschinengewicht ca. 170 kg; Abmessungen L600 × B600 × H1300 mm. Keine speziellen Zusatzausrüstungen angegeben. Eignet sich zur Erzielung enger Toleranzen; typische Einsatzbereiche sind Automotive, Uhrmacherei, Werkzeugmaschinenbau, Luftfahrt und Medizintechnik Technische Daten ohne Gewähr

MURATEC MT 100 ist eine CNC-Doppelspindel-Drehmaschine, ausgelegt für hochpräzise Bearbeitung, hohe Genauigkeit und Zuverlässigkeit. Kapazitäten: Drehdurchmesser 190 mm, Stangendurchmesser Ø51 mm, 2 Spindeln, 2 Revolver mit je 15 Positionen, angetriebene Werkzeuge 6000 rpm. Achsen: X 150 mm, Y ±30 mm, Z 620 mm. Technische Daten: Spindeldrehzahl 0–6000 rpm (stufenlos), Gegenspindel 6000 rpm, Weg 680 mm, Spindelmotor 11/7,5 kW, Eilgang X24 Z40 Y12 m/min, Anschluss 3x400 V 50 Hz, Gewicht ~8000 kg, Abmessungen 4120×2130×2815 mm. Zubehör: Spannzangensatz HAINBUCH SK52BZIG, Ölnebelabsaugung FILTERMIST FX4002, LNS Lademagazin ALPHA SL65 S. Erreicht enge Toleranzen; geeignet für Automotive, Luftfahrt, Medizintechnik und Präzisionskomponenten. Technische Daten ohne Gewähr

VITAX Meuleuse Nr. 38 ist eine Doppelschleifmaschine, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit bei Doppel-Schleifprozessen. Angaben zu Arbeitskapazitäten (Durchmesser, Längen, Verfahrwege, Werkstückmaße) liegen nicht vor. Technische Details (Spindeldrehzahlen, Vorschübe, Stromversorgung, Abmessungen, Gewicht) sind nicht angegeben. Sie ermöglicht enge Toleranzen und eignet sich für Branchen wie Automotive, Luftfahrt, Uhrmacherei, Medizintechnik und Werkzeugmaschinenbau. Technische Daten ohne Gewähr

MURATEC MT 100 is a CNC Doppelspindel Drehmaschine, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Kapazitäten: Schwingdurchmesser 190 mm, Stangendurchmesser max. 51 mm; 2 Spindeln; 2 Revolver mit je 15 Positionen. Verfahrwege X 150 mm, Y ±30 mm, Z 620 mm; Gegenspindelhub 680 mm. Technische Daten: Stufenlos 0–6000 rpm Hauptspindel, Gegenspindel max 6000 rpm; angetriebene Werkzeuge bis 6000 rpm (2,2 kW); Spindelmotor 11/7,5 kW; Eilgang X 24 / Z 40 / Y 12 m/min; Anschluss 3x400 V 50 Hz; Gewicht ~8000 kg; Abmessungen 4120×2130×2815 mm. Zubehör: IEMCA BOSS 552 Lademagazin, Kühleinrichtung, Spannzangensatz, Werkzeughaltersatz, Späneförderer, elektronisches Handrad, C-Achse. Ermöglicht enge Toleranzen; ideal für Automotive, Luftfahrt, Medizintechnik, Uhren- und Maschinenbau Technische Daten ohne Gewähr

: neu : ca. 4 Monate ab Auftragse : Italien : 103500 € : 1956.15 € : 150 to : 500 mm : 1250x1000 mm : 600 mm : 23 mm/s : 4 mm/s : 5.5 kW : 1520 mm : 1270 mm : 2500 mm 4-pillar guide ram guide round table and ram with T-slots 2 hand operation Siemens PLC manometer users manual Light barrier € on Request Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Decompression valve € on Request Oil cooler with decompreission valve € on Request Pressur switch € on Request The data for this ad was created with ModulMWS - ...

Double Z, screw mixer Laboratory Mixing Machines for approx. 60l usable capacity Stainless steel boilers and mixers 1 speed, Boiler tilt function for emptying with lockable lid

Metal band saw, fully automatic, band saw machine, band saw, vertical band saw, horizontal band saw, hydraulic horizontal band saw machine, automatic band saw, automatic metal band saw -Manufacturer: Berg & Schmidt, double miter band saw with roller conveyor left/right -Type: GBS 250 Super AutoCut 2-stage -Drive: 1.7 kW -Miter cuts: 60° left and 45° right -Cutting capacity 90°: Round 255mm, Square 230mm, Rectangle 300x180mm -Cutting capacity 45° left: Round 210mm, Square 190mm, Rectangle 200x160mm -Cutting capacity 60° left: Round 135mm, Square 110mm, Rectangle 130x100mm -Cutting capacity 45° right: Round 180mm, Square 176mm, Rectangle 180x100mm -Saw band speed: 37/74 m/min -Band saw: 2765 x 27 x 0.9 mm -Coolant system: CoolmaticPlus micro-spray system -Quick-release clamping device: adjustable in T-slot for quick position changes -Roller conveyor: 2370/360/H960 mm / 3120/325/H960 ...

Second-hand, double-sided, freestanding cantilever racking designed for the storage and organised retrieval of long goods and materials. The structure is suitable for professional use in warehouses and industrial premises. Technical data: Length: ~ 6,000 mm Arm: 650 mm Height: 3,000 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany

Automatic sub-u. Upper feeder Top rolled rivet, shank diameter bottom record cap 10 mm The rivet length is variably adjustable With cross-light target facility Safety trigger The machine is in very good condition, as the machine was only used for a short time

Key data: 170 mm

Twin-screw extruder Make : COPERION ( Werner & Pfleiderer ) Gearbox make : P.I.V Type : ZSK 170 W 1920/1750 Year of construction : 2021 / 2002 / 1986 Screw diameter : 172 mm Screw speed : 4,9 - 49 min-1 Max. torque : 17,500 Nm Main engine : 216 kW Since 2021 a total of over €420,000 has been invested in new components and factory overhauls (some of which were previously unused) The extruder was in use until Aug / 2023 and has already been dismantled ready for transport. The components are partly redundant and date from the years 1986 - 2021. The scope of delivery consists of : Twin screw degassing Coperion DSE 180 - Year of manufacture 2021 ( 180 t€ ) Main gearbox P.I.V - 1 x year of manufacture 2002, factory overhauled ( 233 t€ ) in 2021, unused - 1 x year of manufacture 1986, factory overhauled in 2016, used 2021 - 2023 Main engines Siemens, ...

Murzan PI-50 Double diaphragm pump two in stock, ideal for handling suspended solids or shear sensitive products with no damage, easy to clean in place, applications juice, drinks, tomato paste, ketchup, yogurt, cottage cheese, eggs and more, 3 inch inlet and outlet, download PDF for full spec

pressure: 315 t stroke: 20-150 mm ram stroke - adjustable min/max: 20 - 150 mm table-size: 1780 x 1250 mm ram surface: 1500 x 1000 mm total power requirement: 75 kW weight of the machine ca.: 46 t - Installation height with max. stroke at bottom adjustment at top 500 mm - Passageway in the table : 1200 x 300 mm - Milling in the table : 1300 x 400 x 80 mm - Infinitely variable stroke rate : 20 120 Hübe min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Serac Rcu42RV14/1620 42 Head Rotary Double Turret Filler Capper (2015) Auction-ID: A1-48805-61

OLEODINAMIC PRESS MOSSINI mod. PO/2M/P 250 Nominal force Ton 250 Slide stroke mm 1.000 Work table dimensions mm 2.500 x 2.000 Max workpiece dimensions mm 2.400 x 1.900 Max workpiece weight kg 5.000 Distance between columns mm 2.500 Daylight between work tables mm 1.800 Moving table stroke mm 1.800 Approach speed mm/sec 160 Working speed mm/sec 10 : 28 Mass without dies and auxiliary devices Ton 45 Response time ms 250 Safety distance mm 400 Approximate weight Ton 45 Overall dimensions above ground mm 4.800 x 2.400 x h 5.905 Auction-ID: A1-48745-10

- Dual-stream mill for fine wood chip production with segmented internal grinding elements. - Main motor power 315 KW. - Equipped with PALLMANN CLEANOMAT system (installed according to documentation in 2009). - Stripper. - The upper feed hopper with vibratory system and the magnet are NOT included (marked with a cross in photograph no. 4). - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-49881-14

Auction-ID: A1-49846-319

- Includes 2 parallel mounted crimping lines. - Length of the boards from 2440 mm to 2850 mm. - Width of the boards from 1830 mm to 2100 mm. - Thickness of the boards from 3 mm to 40 mm. - Each line consists of: • Automatic panel loading system. • Paper positioning system. • SIEMPELKAMP press: plate dimensions 2950 x 2200 x 150 mm, maximum opening 270 mm, total pressing force 23940 KN, maximum working pressure 320 Bars, working temperature 220° C, heating of the plates with thermal oil, maximum performance 150 pressing/hour. • Edge cleaning unit. • Tilting cooling table. • Intermediate conveyors. • Artificial vision system. - Automatic strapping machine BIELE and final magazine (common to the 2 lines). - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of th ...

The cleanroom washbasin with automatic faucet comes from the pharmaceutical industry. Doors with circumferential seal. The waste bins are opened by foot operation. Dimensions: 120x60x90 cm Material: stainless steel, plastic Auction-ID: A7-49816-147

Sorting and feeding station with double spiral conveyors Complete feeding and sorting station consisting of two spiral conveyors (Sortimat), each with stainless steel bunker attachment, internal insulation and a downstream separation and transfer system. The system was used in an industrial assembly line for parts feeding. The unit stands on a stable steel frame (painted blue). Each spiral conveyor has its own control units (Sortimat), consisting of: Bunker controller Spiral conveyor controller Rail/vibrator regulator All controllers are individually adjustable. Technical data: Length: approx. 210 cm Width: approx. 180 cm Total height: approx. 145 cm Auction-ID: A7-49816-29

TOX Double Press (2-Cylinder System) Manufacturer: TOX Pressotechnik Model: Kraftpaket line-X – Double Cylinder Type Cylinder: X-K 008.3030.100.12H System: 1 Press = 2 Coupled Cylinders Condition: used, complete, dismantled from industrial production Technical data: TOX Kraftpaket line-X 2× Cylinder Type X-K 008.3030.100.12H incl. central control block, pressure gauge and sensors Robust industrial design Dimensions: Length approx. 80 cm Width approx. 30–32 cm Height approx. 25 cm Weight approx. 80 kg Series: TOX Kraftpaket line-X, Type X-K Force class: Size 008 (medium press force class) Stroke configuration: 30 mm pre-stroke + 30 mm Force/setting stroke Total stroke: 60 mm Powerpack stage: 100 (≈ 50–60 kN at 6 bar) Max. operating pressure: 6 bar (according to the blade) Volume: 47 ml Version: 12H (reinforced / Heavy Duty) Application: joining, embossing, clinching, punching, ...

AEG Double Grinding and Polishing Machine – Type DP 300/2200 -Operating voltage: 380 V -Motor power: 2.2 kW -Max. disc diameter: Ø 300 mm -Max. pane width: 50 mm -Polishing spindle speed: 1,400 rpm Dimensions: LxWxH 1.2x0.4x0.9 meters / Weight 180Kg

Set of 150 high-end insulated sandwich panels and 7 insulated double doors, already disassembled. Sandwich panels: Dimensions: 3,000 x 1,160 mm Thickness: 60 mm Several additional pieces included Doors: 7 white swinging double doors Thickness: 60 mm Auction-ID: A1-49935-20

2x 2-doors; left and right can be adjusted separately; temperature -20 to +5° C adjustable; timer; levels adjustable in height; Includes 10 stainless steel grating scales; grid size 600x800 mm; Auction-ID: A1-49547-5

Double bench grinder original GREIF incl. stand Speed (min.): 3,000 rpm Grinding wheel diameter: 200 mm incl. CEE plug Power: 0.55 kW

Double bench grinder original GREIF incl. stand incl. CEE plug Power: 0.55 kW Speed: 3,000 1/min Grinding wheel diameter: 200 mm

wheel diameter: 300 mm grinding wheel width: 50 mm no. of working stations: 2 Stück turning speed range - stepless: 1.450 / 2.900 U/min voltage: 400 V total power requirement: 1,6 / 22 kW weight of the machine ca.: 130 kg dimensions of the machine ca.: 1,10 x 0,50 x 1,30 m ! ATTENTION ! EXCELLENT CONDITION ! This machine comes from a vocational school! - Serial No.: 090303004 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

New Anthracite Double-Leaf Vertical Slat Gate A modern and durable double-leaf gate manufactured from high-quality steel profiles, finished in an elegant anthracite color. The vertical slat (comb-style) design ensures both aesthetic appeal and structural strength, making it suitable for residential and commercial applications. Specification: Gate type: double-leaf, vertical slat (comb-style) Leaf construction: steel profiles 60 mm ×40 mm Posts: 100×100 mm, height 2 200 mm Finish: anthracite (powder-coated) Included: 2 × gate leaves 2 × steel posts 4 × adjustable hinges 1 × gate stop Packaging: The gate is securely packed on a wooden pallet and prepared for safe transport. Auction-ID: A1-49902-30

wheel diameter: 300 mm grinding wheel width: 50 mm no. of working stations: 2 Stück turning speed range - stepless: 1.450 / 2.900 U/min voltage: 400 V total power requirement: 1,6 / 22 kW weight of the machine ca.: 130 kg dimensions of the machine ca.: 1,10 x 0,50 x 1,30 m ! ATTENTION ! EXCELLENT CONDITION ! This machine comes from a vocational school! - Serial No.: 090520004 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

New Anthracite Double-Leaf Vertical Slat Gate A modern and durable double-leaf gate manufactured from high-quality steel profiles, finished in an elegant anthracite color. The vertical slat (comb-style) design ensures both aesthetic appeal and structural strength, making it suitable for residential and commercial applications. Specification: Gate type: double-leaf, vertical slat (comb-style) Leaf construction: steel profiles 60 mm ×40 mm Posts: 100×100 mm, height 2 200 mm Finish: anthracite (powder-coated) Included: 2 × gate leaves 2 × steel posts 4 × adjustable hinges 1 × gate stop Packaging: The gate is securely packed on a wooden pallet and prepared for safe transport. Auction-ID: A1-49902-51

Year & Manufacturer: 1990 — EIMA Maschinenbau GmbH Dimensions (mm): 3200 × 3600 × 1500 Power supply: 380/220 V – 50 Hz Power: 10.75 kW Auction-ID: A1-50001-26

Year & Manufacturer: SCM Dimensions (mm): 5500 × 2500 × 1600 Power supply: 380 V – 50 Hz Power: 2 × 4 kW (sawing units) + 2 × 4 kW (milling units) Working parameters: Max. working width approx. 3000 mm – Max. workpiece thickness approx. 180 mm – Chain length approx. 2200 mm Parts capacity: Two heads on each side Included equipment: 2 sawing units (blade Ø350 mm), 2 milling units (spindle approx. 90 mm), chain conveyor, separate control cabinet Remarks: SCM D80 type machine. Motor speed: 3000/6000 rpm. Auction-ID: A1-50001-23

Reference: 342-3573 Compatibility: Caterpillar 350 excavator Type: Cab windshield Thickness: 7 mm Structure: Double layer Dimensions (mm): 7 x 837 x 1576 Auction-ID: A1-50002-23

Year & Manufacturer: 2006 — Chambon Power supply: 400 V Power: 24 kW Working parameters: Working width 1350 mm Parts capacity: Wide belt sander for wood panels and parts Included equipment: Inlet/outlet table, suction, electrical box, roller conveyor Compliance: CE Auction-ID: A1-50001-22

Reference: 342-3573 Compatibility: Caterpillar 350 excavator Type: Cab windshield Thickness: 7 mm Structure: Double layer Dimensions (mm): 7 x 837 x 1576 Auction-ID: A1-50002-24