138,254 used machines on RESALE, but how to find them? Machine Search
diameter range 3-6 mm shaft length under head 50 mm max. cut-off length 75 mm output - pieces/min 300
diameter range 2-4 mm shaft length under head 100 mm max. cutting length 117 mm output- piece/min 110
diameter range 2-4,76 mm shaft length under head 46 mm max. cut-off length 60 mm output pieces/min 470
diameter range 2-5 mm shaft length under head 25 mm max. cutting length 37 mm output- piece/min 330
diameter range 2-5,2 mm shaft length under head 120 mm cutting length 146 mm output pieces/min 105
bushing cut-off diameter range 5 mm cutting length 50 mm shaft length under head 40 mm output - pieces/min 450
bushing cut-off diameter range 1-4mm shaft length under head 25 mm max. cutting length 32 mm output- piece/min 350
bushing cut-off diameter range 1-4mm shaft length under head 25 mm max. cutting length 32 mm output- piece/min 350
Key data: 108 mm
Theysohn TTS 108-26/CON 40 with coexrurder 40 mm // 2011 year prod. // Control Panel TEC-2TS
Key data: 63 mm, 1750 1/min
double extruder Theysohn CON 63 with Coextruder CON 40 PCV // 2008 year prod. // Main Drive Power - 37 kW // Control Panel Colour TEC-2TS
Double side grinding of flat mass parts, e.g. cams, piston rings. Machine type: Planet V7 Machine No.: 381019 Technical data Double page flat grinding Part diameter: max. 180 mm Part thickness: max. 100 mm Condition: Technical – very good, Optical – as good as new (Pictures partly similar) Seller Offer No. resale 770057
Used double conical kneader WP, type: DK 150 -In bakery condition- - for max. 150 kg flour or 240 kg dough - Incl. 3 tank cars Visits and test runs are possible.
screw ø:: 30 mm screw length:: 25D screw speedl:: -- U/min drive power:: 4 kW Condition: second-hand Specification: Co-extruder, plastic extruder, type 30-25D as good as new, unused, - Screw diameter: 30 mm - Screw length: 25D - Output approx.: 12–18 kg/h - Raw material: Soft PVC/PE/PP/TPE/TPV (in granule form) - Application: Sealing profiles - DC motor power: 4 kW - Extruder zones: 5 (3 on the barrel, 2 on the die head) - Extruder height: 900–1200 mm - Die head connection: Flange connection - Further details are provided in the annex to the quotation. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 380 mm
Max. cutting length: 4,500 mm Max. saw blade diameter: 380 mm Manual positioning of the sawing unit with digital length display Cutting area at 90°: 195 x 120 mm Cutting area at 45°: 135 x 120 mm Minimum quantity spraying device Pneumatic material tensioners Mitre cuts possible on both sides 2-hand operation
Offer 26157 Technical data: - Grinding wheel diameter approx. 300 mm - Grinding wheel width approx. 40 mm - Grinding wheel bore approx. 70 mm - Disc speed 1450 rpm - Working height 1050 mm - Drive 400 V / 1.1 kW - Space requirement approx. W 800 x H 1200 x D 600 mm - Weight approx. 150 kg
Pressure total: 2000 ton Stroke: 1500 mm Daylight: 2000 mm Table surface area : 5000 x 2500 mm Slide area: 5000 x 2500 mm Die cushion capacity in table: 100 - 600 ton Die cushion stroke: 400 mm Die cushion pad area: 4000 x 1800 mm Cushion pressure in ram: 50 - 300 ton Approach speed: 200 mm / sec Working speed: 20 - 30 mm / sec Return speed: 200 mm / sec Oil volume: 5000 l Required power: 2 x 250 kW Weight of machine approx.: 360 ton
Pressure total: 100 ton Daylight: 1.400 mm Table surface area : 1.300 x 1.000 mm Slide area: 1.300 x 1.000 mm Ejector Force: 35 kN max. capacity of swivelling ram plate: 40 kN Die Weight on table max.: 80 kN max. capacity of tilting table: 50 kN Oil volume: 200 l Required power: 10 kW Dimensions L x W x H: 3.95 x 2.3 x 4.5 m Distance between the columns F - B: 1.050 mm Weight of machine approx.: 10 ton
TECHNICAL DATA: Working dimensions: max. 1300 x 100 x 60 mm 02 Milling axes Milling cutter axis: Ø 30 mm Usable height of the milling cutter: max. 80 mm Speed: 7000 rpm 03 vertical drilling units 01 Mortising machine Equipped with automatic feeder Installed power: 13 kW
TECHNICAL DATA: Working length: min. 200 mm – max. 1500 mm Working width: min. 30 mm – max. 110 mm Working thickness: min. 10 mm – max. 60 mm Saw blade: max. Ø 400 mm Sawing unit: 6 kW (2 x 3 kW) Installed power: 11 kW INCLUDED IN DELIVERY: 01 Waste conveyor belt
A Schüco double miter saw for cutting aluminum and light metal profiles is available. Working length: 6000mm, saw units: 2, max. profile cross section X/Y: 150mm/100mm, min. cutting length: 400mm, speed: 2800rpm, cutting angle range: 45°-90°, saw blade diameter: 400mm. Documentation available. An on site inspection is possible.
pressure: 500 t distance between columns: 1600 mm stroke: 60 mm max. ram stroke: 60 1 / min ram adjustment: 100 mm dayligth: 700 mm Table area: 1600x1400 mm ram surface: 1400x1150 mm total power requirement: kW weight of the machine ca.: 40 t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the ...
pressure: 630 KN distance between columns: 800 mm stroke: 150 mm table surface area: 720x550 mm ram surface: 720x520 mm dayligth: 420 mm rapid drop speed: 394 mm/sec working feed: 71/17 mm/sec return speed: 390 mm/sec adjustment movement of the stroke: 120 mm total power requirement: 15 kW weight of the machine ca.: t dimensions of the machine ca.: m Cutting impact dampening The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look ...
pressure: 100 t passage width: . mm stroke: . mm tracking travel: 45 mm safety distance: 208 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Follow-up time 149 sec The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 t passage width: 1000 mm stroke: 700 mm width: 800 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding wheel diameter: 300 mm no. of working stations: 2 Stück speeds: 1915/2500 U/min dimensions of the machine ca.: 550x500x1200 mmxmmxmm weight: 220 kg With coolant system More details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 25 t, 1000 mm, 400 mm
Piston press – 25 t – 1,000 × 600 mm For sale is a hydraulic lower piston press from the manufacturer DURENDUS with a maximum pressing force of 25 t. The machine has a table size of 1,000 × 600 mm, a maximum installation height of 600 mm and a stroke of 400 mm, making it suitable for assembly, straightening, press-fitting and forming work in industrial use. Technical data + information: Piston press – 25 t – 1,000 × 600 mm General information - Reference ID: DE-2026-HB-227-01 - Type: 4-column lower piston press - Manufacturer: DURENDUS - Press force: 25 T (adjustable) - Table size: 1,000 × 600 mm - Max. installation height: 600 mm - Working height: 1,000 mm - Total height: approx. 1,850 mm - Total width: approx. 1,750 mm - Total depth: approx. 1,200 mm - Total weight: approx. 2,000 kg Hydraulic cylinders - Stroke: 400 mm - Cylinder diameter: Ø 1 ...
: neu : ca. 2 - 4 Wochen ab Auftr : 4852.45 € : 250 x 40 x 51 mm : 1300 x 75 mm : 1,4 kW : 1400 1/min : 15 m/s : 42 mm : 600 mm : 540 mm : 1190 mm : 1200 x 800 x 1000 mm : 70 kg With base frame, integrated suction and brake High performance Belt grinding device height adjustable 0-90°. Maximum usable face grinding area Belt adjustment with fine adjustment Longitudinal stop for material guide Perfectly balanced and low vibration Connection on both sides for dust extraction Ø 50 mm Motor protection switch with undervoltage release Fixed stop 1 Sanding belt standard (brown), grit 80 1 grinding wheel 250 x 40 x 51 mm, grit 80 Spark protection Connection cable with CEE plug ALTERNATIVES: Version without suction (Art. 330.365) Version without stand, suction and brake (Art. 330.360) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 163 t
Hydraulic 4-column press – 163 T – 2,000 × 1,400 mm For sale is a hydraulic 4-column press from the manufacturer HYMAG with a maximum pressing force of 163 t. The machine has a table size of 2,000 × 1,400 mm, an open height of 1,300 mm and a stroke of 700 mm, making it suitable for forming, straightening, pressing, press-fitting and assembly work in industrial use. Technical data + information: Hydraulic 4-column press – 163 T – 2,000 × 1,400 mm General information - Manufacturer: HYMAG - Type: Hydraulic 4-column press - Model: HS 4 160-K3 - Machine number: 1606.18 - Year of construction: 2015 - Press force: 163 t - Nominal force: 1,600 kN - Table size (usable area): 2,000 × 1,400 mm - Plunger plate size: 2,000 × 1,400 mm - Table height: 800 mm - Open height: 1,300 mm - Stroke: 700 mm - Front passage: 2,010 mm - Side passage: 900 mm - Total height ...
Max. saw length: 6,000 mm Max. saw blade diameter: 550 mm Windows-based control system E 555 with touch display Swivel inside and outside 22.5° - 90° - 140° Tilt the angles between 45 and 90 degrees Digital Angle Displays Moving roller conveyor Chip extraction on both units Minimum quantity spraying device Label Printers Machine is loaded freely
Operating voltage: 220/380 V Frequency: 50 Hz Connection: 500 W Grinding wheel diameter: 200 mm Width: 25 mm Auction-ID: A7-49089-408
Serial number: 0703039.001 Operating voltage: 230/400 V Connection: 0.9 kW Rated current: 3.6/2.1 Speed: 2900 rpm Grinding wheel dimensions: 200 x 32 x 51 mm Auction-ID: A7-49089-477
Technical data Manufacturer / model: C.M.E. S.r.l., Ideal I360 / type 1360 Serial number / year: 03401 / 2010 Flow rate / operating pressure: 36 m³/h at 3 bar Maximum pressure: 4 bar Motor power / speed: 5.5 kW / 2,900 rpm Dimensions (L × W × H): 1,350 × 730 × 960 mm Weight: approx. 325 kg Connections: DIN 65 according to DIN 11851 Product-contact materials: AISI 316 stainless steel and NBR elastomers Suitable media: wine, destemmed grapes, must, vinegar, oil, juices, and fruit/vegetable pulp Maximum fluid temperature: approx. 70 °C Performance curves: not available Spare parts: see the operating and maintenance manual with spare-parts catalogue Machine-specific operating data according to C.M.E., dimensions according to the Ideal 360” manual.
: neu : ca. 4 Monate ab Auftragse : Italien : 63500 € : 1200.15 € : 70 to : 500 mm : 900x700 mm : 600 mm : 25 mm/s : 6 mm/s : 4 kW : 1140 mm : 940 mm : 2350 mm 4-pillar guide ram guide round table and ram with T-slots 2 hand operation Siemens PLC manometer users manual Light barrier € on Request Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Decompression valve € on Request Oil cooler with decompreission valve € on Request Pressur switch € on Request The data for this ad was created with ModulMWS - the so ...
: neu : ca. 4 Monate ab Auftragse : Italien : 74800 € : 1413.72 € : 100 to : 500 mm : 1000x800 mm : 600 mm : 26 mm/s : 5 mm/s : 4 kW : 1260 mm : 1060 mm : 2400 mm 4-pillar guide ram guide round table and ram with T-slots 2 hand operation Siemens PLC manometer users manual Light barrier € on Request Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Decompression valve € on Request Oil cooler with decompreission valve € on Request Pressur switch € on Request The data for this ad was created with ModulMWS - the ...
: neu : ca. 4 Monate ab Auftragse : Italien : 172500 € : 3260.25 € : 300 to : 500 mm : 1250x1000 mm : 600 mm : 22 mm/s : 2 mm/s : 7.5 kW : 1750 mm : 1500 mm : 2800 mm 4-pillar guide ram guide round table and ram with T-slots 2 hand operation Siemens PLC manometer users manual OPTIONS: Light barrier € on Request Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Decompression valve € on Request Oil cooler with decompreission valve € on Request Pressur switch € on Request The data for this ad was created with M ...
Type: KM 80 ADoppel Z-kneaderDrive: 11 KW at 30/23 rpmArea in contact with the product: stainless steelNet capacity: 80 L Robust industrial designSuitable for highly viscous and paste-like productsEasy loading and emptying (depending on the version)
Vertical Two-Spindle Turning Center - Control Siemens 840 D - Machine bed VSC 400 Duo - 2 x disc turret 12 x dia 40 mm, driven - 2 x additional drilling and countersinking station - Open workpiece transport system - Transfer and turning unit - Interface to an external handling system - Central cooling center supply high-pressure pump 70 bar - Blowing off the pick-up device and the clamping devices - Workpiece measurement - Tool monitoring - Emag network option - Sister tool management Circumferential diameter 260 mm x-travel 860 mm z-travel 200 mm Main spindle 2 max. speed up to 4500 1/min Spindle spacing 1055 mm Main Drive 2 AC Asynchronous Motor 6ß/100% ED 39/28 KW Maximum torque 460 Nm Rapid traverse x/ z 45/ 30 m/min
: neu : ca. 4 Monate ab Auftragse : Italien : 65000 € : 1228.5 € : 35 to : 500 mm : 800x500 mm : 600 mm : 125 mm/s : 9 mm/s : 68 mm/s : 4 kW : 1100 mm : 1100 mm : 2300 mm 4-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 4 Monate ab Auftragse : Italien : 71300 € : 1347.57 € : 60 to : 500 mm : 800x500 mm : 600 mm : 120 mm/s : 8 mm/s : 58 mm/s : 5.5 kW : 1100 mm : 1100 mm : 2350 mm 4-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 4 Monate ab Auftragse : Italien : 78000 € : 1474.2 € : 85 to : 500 mm : 900x600 mm : 600 mm : 105 mm/s : 7 mm/s : 58 mm/s : 7.5 kW : 2250 mm : 1150 mm : 2400 mm 4-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 4 Monate ab Auftragse : Italien : 104000 € : 1965.6 € : 125 to : 500 mm : 1200x700 mm : 600 mm : 115 mm/s : 7 mm/s : 70 mm/s : 15 kW : 2550 mm : 1500 mm : 2600 mm 4-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 4 Monate ab Auftragse : Italien : 164500 € : 3109.05 € : 260 to : 500 mm : 1400x1000 mm : 600 mm : 75 mm/s : 5 mm/s : 60 mm/s : 22 kW : 2800 mm : 1650 mm : 2750 mm 4-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding wheel diameter: 300 mm no. of working stations: 2 Stück total power requirement: 0.75 kW weight of the machine ca.: 0.2 t With dust exhauster More details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding wheel diameter: 300 mm no. of working stations: 2 Stück total power requirement: 1,1 kW weight of the machine ca.: 0.2 t 1x Cup wheel diameter 300mm 1x tangential wheel 260x50mm Drill sharpening device More details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
work table:: 290x130 mm table - tiltable +/-: 15 ° cross adjustment: grinding wheel diameter: 150 mm turning speeds:: 1 dimensions of the machine ca.: 780X630X1100 mmxmmxmm weight of the machine ca.: 185 kg coolant: komplett The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding wheel diameter: 400 mm no. of working stations: 1 Stück total power requirement: 1,7 kW weight of the machine ca.: 0.4 t With coolant system More details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Rema DMGB-35 double cross-cut saw, including an outfeed conveyor belt, for cross-cutting timber on both sides. This machine was specifically used for cutting doors to size. In its current condition, the cutting length is limited to 1,000 mm, but this can be extended. Technical data: Belt length: approx. 1,700 mm + 2,700 mm Cutting width: max. 2,500 mm Cutting height: max. approx. 80 mm Condition: Gebraucht Location: Unbekannt, Belgium
Striffler Type 2750-E double mitre circular saw for precise mitre and cross cuts in timber profiles, mouldings and frames. The machine is ideally suited to mass production in the window, door and furniture manufacturing sectors, thanks to its two pneumatically swivelling saw units and electronic positioning. Technical data: Cutting length: approx. 2,200 mm Mitre angle: 45° 90° Workpiece: max. 50 × 70 mm Further details: See PDF Condition: Gebraucht Location: Tauberbischofsheim, Germany
maximum number of results exceeded
please refine your search
40 € 
