double wall used for sale

Double hydraulic pump, oil pump, gear pump -Shaft diameter: Ø 22.5 mm -Dimensions: 300/120/110 mm -Weight: 9 kg

Key data: 550 mm

Five Axis CNC Controlled Dual Head Double Miter Circular Sawing Machine with Loading and Unloading Device Maximum section length with two saw heads at the same time - 6,000 mm Maximum saw blade diameter Ø 550 mm Infinitely programmable mitre angle adjustment - 15° / 90° / + 45° Saw blade drive power 2 x 2.64 kW Dimensions approx. 11.3 m x 2 m x H 2 m (with closed safety doors)

Double hydraulic pump, oil pump, gear pump -Shaft diameter: Ø 22.5 mm -Dimensions: 300/120/110 mm -Weight: 9 kg

Double hydraulic pump, oil pump, gear pump -Shaft diameter: Ø 22.5 mm Price: per piece -Quantity: 2 available -Dimensions: 300/120/110 mm -Weight: 9 kg

Double hydraulic pump, oil pump, gear pump -Shaft mounting: Ø 21.5 mm -Dimensions: 300/120/110 mm -Weight: 9 kg

Engine: diesel engine Cummins F3.8 - Stage 5 Power: approx. 114 kW / 154 hp Shafts: 7/7 discs with 8 knives per discs & breaker bar with combs Version: track system with hopper with vibro chute Permanent - OVERBAND Magnet remote control Weight: approx. 11 t

Key data: 30 t

Hydraulic press can be used in a variety of ways as an assembly press, small series press, manual insert press or heating press in double-column presses Design (H-press) A tour of the press is possible at the Ennepetal camp. It is a 2.5-year-old, unused press with no operating hours, which is sold with a full warranty. List price: 45,000 Technical details: Robust machine frame Capacity: 30 tons – at 300 bar Pump ASC: 28.5 liters/min. Engine: 11 kW – 15 hp Oil tank: 600 × 450 × 500 mm – with approx. 100 litres Cylinder piston: Ø 110 mm Cylinder inside: Ø 70 mm Stroke: 500 mm Fast forward: 45 mm/s Return: 55 mm/s Guides: Ø 50 mm Table top: 800 × 550 mm – with T-slots Plunger plate: 700 × 500 mm – with T-slots Total weight: 2000 kg Valves from BoschRexroth Control cabinet technology from renowned manufacturers Press table size 700 × 500 × 7 ...

Max. saw length: 5000 mm Max. saw blade diameter: 450 mm Automatic positioning of length and angle (90° or 45°) Moving roller conveyor Material support Minimum quantity spraying device

Double hydraulic pump, oil pump, gear pump -Shaft mounting: Ø 21.5 mm -Dimensions: 300/120/110 mm -Weight: 9 kg

Double hydraulic pump, oil pump, gear pump -Shaft mounting: Ø 21.5 mm -Dimensions: 300/120/110 mm -Weight: 9 kg

for production of forgings by forging of ferrous, non-ferrous metals and alloys in the hammer dies model M212 Impact energy, 50 kJ Nominal weight of falling parts, kg 2000 Stroke woman, mm 1200 Stroke woman, mm 1200 Machine dimensions Length Width Height (mm) 3650X1660X5310 Weight kg 58.310, spare parts available

faceplate diameter: 3100 mm swing diameter: 3600 mm turning height: 3600 mm control: Fagor 8035 table load: 35 t turning speeds: 0,32 - 40 U/min max. ram stroke: 3000 mm table load: 35 t turning speeds: 0,32-40 U/min total power requirement: 70 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Double hydraulic pump, oil pump, gear pump -Shaft mounting: Ø 21.5 mm -Dimensions: 300/120/110 mm -Weight: 9 kg

Double hydraulic pump, oil pump, gear pump -Shaft mounting: Ø 21.5 mm Price: per piece -Quantity: 2 available -Dimensions: 300/120/110 mm -Weight: 7 kg

pressure: 1645 t stroke: 1000 mm dayligth: 3000 mm Control: down speed: 280 mm/sec return speed: 275/346 mm/sec distance between columns: 2520 mm total power requirement: kW weight of the machine ca.: t the machine is in very good condition optional you can buy a shifting table as well The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 t stroke: 150 mm table surface area: 850x650 mm ram surface: 730x560 mm weight of the machine ca.: 8 t dimensions of the machine ca.: BxTxH 2000x2500x3600mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 t distance between columns: 500 mm stroke: 150 mm ram surface: 320 mm table surface area: 470x400 mm weight of the machine ca.: 12 t dimensions of the machine ca.: 2000x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 25 t distance between columns: 580 mm stroke: 150 mm dayligth: 370 mm table surface area: 560x400 mm ram surface: 400x350 mm hole in the table: 80 mm weight of the machine ca.: 2,5 t dimensions of the machine ca.: 1500x500x2500 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 160 t distance between columns: 850 mm stroke: 400 mm ram surface: 800x700 mm : 300 mm pressure of ejector: 20 t table surface area: 800x700 mm total power requirement: kW weight of the machine ca.: 12 t dimensions of the machine ca.: 1800x1800x4200 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 360 t stroke: 60 mm table surface area: 525x430 mm no. of strokes: 60 Hub/min : 40 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Transport dimensions approx. 400x400x1200 mm. Auction-ID: A7-45347-632

Double transformer, toroidal transformer SCHUTTERMANN 2 x RV 230/B ( 2xRV230/B ) Baugr. G260 IP00 2 x 8 A Prim. 2 x 230 V sec. 2 x 0 - 230 V 50 - 400 Hz Regeltransformo für 2 x LU29 ! Dimensions: 340 x 190 x 190 mm

Double switching element, 1-stage DEMAG CBD1 87466744 500 V 20 A New ! Dimensions: 65 x 65 x 65 mm

Landing height approximately: 1400 mm Auction-ID: A1-41275-290

Double Hydraulic Pump with Motor and Radiator CASAPPA PLP 10.3.15/81 E1/1 ( PLP10.1 3.15/81E1/1 ) 0.2 D-EL-FS and PLP 10.2 D -88V6-L BB/BA-N-EL-P-FS oil cooler RAJA-LOVEJOY KPV200/100/448/D24/DF/ZR KP2000111 Engine: 1.5 kW 220 / 380 V IP55 used, tested ! Dimensions: 500 x 280 x 260 mm

Double hook - depth caliper, depth thrust gauge PAGUS 0 - 300 mm pitch: 0.1 mm beam length: 94 mm New ! Dimensions: 377 x 94 x 10 mm

Double hook - depth caliper, depth thrust gauge PAGUS 0 - 300 mm pitch: 0.05 mm beam length: 98 mm New ! Dimensions: 380 x 98 x 10 mm

Double Diaphragm Pump KURT SCHMIDT FARBSPRITZANLAGEN Dimensions: 250 x 240 x 310 mm

Double flange, pipe connector PAGUS DN 125/139 DIN 2576 PN 10 width 80 mm flange: Ø 250 mm stainless steel flange ! Dimensions: 250 x 250 x 80 mm

Auction-ID: A7-44871-69

Double pressure gauge for fine measurements, pressure gauge MESSGERÄTEWERK BEIERFELD 1/FM220 2 x 0 - 60 kp/cm² (0 - 60 bar) TGL16374 Accuracy class: 0.0.2 6 Housing diameter: Ø 150 mm Connection thread: 2x M20 x 1.5 New ! Dimensions: 220 x 180 x 75 mm

Double bench grinder WMW Type ST300 Year: 1970 Disc drm.: 300 mm Power: 1.1 kW Dimensions: 750 x 420 x 1200 mm

Double pressure gauge for fine measurements, pressure gauge MESSGERÄTEWERK BEIERFELD 1/FM220 2x 0 - 25 kp/cm² (0 - 25 bar) TGL16374 Accuracy class: 0.25 6 Housing diameter: Ø 150 mm Connection thread: 2x M20 x 1.5 New !' Dimensions: 220 x 180 x 75 mm

Double bench grinder SOLID DS300STA Disc diameter Ø max 300 mm Disc width max 40 mm 1.5 kW 1500 rpm 220 / 380 V Dimensions: 700 x 530 x 1100 mm

Double bench grinder VEM SEWStNa40SENa350 Disc diameter Ø 350 / 350 mm Disc width 63 / 40 mm with cooling device 1,1,1,000 5 kW 3000 rpm 220 / 380 V Dimensions: 1050 x 950 x 1300 mm

Double Ball Valve 3-Way HYDAC KHB-SO1111 PN10BAZ 3235764-0 Pneumatic Actuator Zero Series pmax 10 bar DSA-046/180 60000556 New ! Dimensions: 180 x 115 x 50 mm

Auction-ID: A1-45406-43

Double bench grinder, brush deburring machine, deburring machine VEM, ELBTALWERK SEWStN40SEN350 disc diameter Ø 350 / 350 mm Disc width 63 / 40 mm with a wire brush ! 1.5 kW 1500 rpm 220 / 380 V used, tested ! Dimensions: 1400 x 800 x 1250 mm

Double ring wrench offset HEYCO NW 65 / 70 chrome vanadium DIN 838 / ISO 1085 New ! Dimensions: 710 x 110 x 75 mm

Auction-ID: A1-45406-44

Double bench grinder GISAG SE 2x400/1 TGL 24500 Disc diameter: Ø max 400 mm 4 kW 380 V Protective cover is missing !' used, tested !' Dimensions: 1100 x 700 x 1200 mm

257x131 Auction-ID: A3-43366-5761

Double Ball Valve 3-Way HYDAC KHB-SO1111 PN10BAZ 3235764-0 Pneumatic Actuator, Zero Series < -br />pmax 10 bar DSA-046/180 60000556 used / repaired Prototype 1+4 Dimensions: 180 x 115 x 50 mm

CNC turning-milling center Emco Hyperturn 65 Powermill SMYB Commissioning 7/2019 At call! Siemens 840D-SL Shopturn Main spindle BigBore spindle passage 76mm KK8 - 4,000 1/min Sub-spindle KK6 - 5,000 1/min 40-speed chain magazine HSK-T63 Turret bottom VDI30 / Sauter Electronic handwheel Emco Tool Breakage and Wear Gear milling Shopturn Expansion Pack 5-axis simultaneous machining Energy management for Sinumerik OPC UA / Siemens interface 3D machine model Emco Standard Bar Feeder Interface Machine Status Lamp LED Multiflow Cleaning Gun Oil Mist Separator Belt filter system with IKZ Main Spindle Clamping Hook Hainbuch Clamping Top Mini Combi Ax Hoist Sub-spindle Schunk 185mm THW-plus with hard jaws The options list is complete! No interest in dealer enquiries! No separate dealer price! WB mechanics GmbH is a precision mechanics workshop that markets its ...

Brand: Fiat Model: Doblo • Variant: Estate / Cargo (double cab, 5-seater) • Registration date: 28.10.2016 • Vehicle class: Commercial vehicle / light van • Colour: White • Engine: 1.6 Multijet Diesel • Power: approx. 77 kW (105 hp) • Fuel: Diesel • Transmission: Manual • Drive: Front-wheel drive • Permissible total weight: approx. 2,000 – 2,100 kg • Emission class: probably Euro 5 • Seats: 5 • Sliding door right / left • Glazed side wall in the cargo area • Rear wing doors (double-leaf) • Fabric interior • Power steering • ABS, ESP • Driver's airbag • Passenger airbag • Steel rims • Adjustable exterior mirrors • Radio • Rear bench seat (3 seats) • Interior with signs of wear, see pictures • Body with scratches • No obvious accident damage visible • General condition: used, com ...

Note, sorted out. Auction-ID: A1-43751-159