double side maschine used for sale

2.5 Diesel – 163 hp Manual gearbox (6 gears) 166,567 km Double cab – 6 seats Tipper Towing capacity: 2000 kg Ex-government vehicle Electric windows Electrically adjustable exterior mirrors Central locking Radio Auction-ID: A3-43369-5007

62.5 running metres, 8/6/8 mm Height: 1.23 m Double bar mat fence complete set including post and fastening material retaining plates Fence elements: 1230 mm height and 2,500 mm length Posts for concreting: 1800 mm Number of fence elements: 25 pieces Number of posts: 26 pieces Double rod mats Material (RAL) Galvanized according to DIN EN 10244-2 and powder-coated Fence Spikes 30mm Mesh size 50mm x 200mm Mat width 2510mm Fence post with clamp Material: Hot-dip galvanized, powder-coated according to DIN EN ISO 1461 and RAL 7016 Material: Post cap: Plastic Material Accessories Stainless Steel Post profile (mm) 60 x 40 x 2 Fence fastening Stainless steel rivet nuts already integrated into the post Screws for Clamps Stainless Steel Screws M8 Accessories (included) Pre-assembled plastic fastening attachments incl. rivet nuts, aluminium clamping tabs, fence screws M8 ...

62.5 running metres, 8/6/8 mm Height: 0.83 m Double bar mat fence complete set including post and fastening material retaining plates Fence elements: 830 mm high and 2,500 mm long Posts for concreting: 1400 mm Number of fence elements: 25 pieces Number of posts: 26 pieces Double rod mats Material (RAL) Galvanized according to DIN EN 10244-2 and powder-coated Fence Spikes 30mm Mesh size 50mm x 200mm Mat width 2510mm Fence post with clamp Material: Hot-dip galvanized, powder-coated according to DIN EN ISO 1461 and RAL 7016 Material: Post cap: Plastic Material Accessories Stainless Steel Post profile (mm) 60 x 40 x 2 Fence fastening Stainless steel rivet nuts already integrated into the post Screws for Clamps Stainless Steel Screws M8 Accessories (included) Pre-assembled plastic fastening attachments incl. rivet nuts, aluminium clamping tabs, fence screws M8 x 40 ...

with hydro system for trailer - double (working) air conditioning - automatic transmission - neat truck that starts, brakes and drives smoothly - very slight (repaired) damage at the rear (see photos) and slight wear of the driver's seat. Auction-ID: A3-43369-10793

75 running metres, 6/5/6 mm Height: 0.83 m Double bar mat fence complete set including post and fastening material retaining plates Fence elements: 830 mm high and 2,500 mm long Posts for concreting: 1400 mm Number of fence elements: 30 pieces Number of posts: 31 pieces Double rod mats Material (RAL) Galvanized according to DIN EN 10244-2 and powder-coated Fence Spikes 30mm Mesh size 50mm x 200mm Mat width 2510mm Fence post with clamp Material: Hot-dip galvanized, powder-coated according to DIN EN ISO 1461 and RAL 7016 Material: Post cap: Plastic Material Accessories Stainless Steel Post profile (mm) 60 x 40 x 2 Fence fastening Stainless steel rivet nuts already integrated into the post Screws for Clamps Stainless Steel Screws M8 Accessories (included) Pre-assembled plastic fastening attachments incl. rivet nuts, aluminium clamping tabs, fence screws M8 x 40,  ...

75 running metres, 6/5/6 mm, height 2.03 m Double bar mat fence complete set including post and fastening material retaining plates Fence elements: 2,030 mm high and 2,500 mm long Posts for concreting: 2,600 mm Number of fence elements: 30 pieces Number of posts: 31 pieces Double rod mats Material (RAL) Galvanized according to DIN EN 10244-2 and powder-coated Fence Spikes 30mm Mesh size 50mm x 200mm Mat width 2510mm Fence post with clamp Material: Hot-dip galvanized, powder-coated according to DIN EN ISO 1461 and RAL 7016 Material: Post cap: Plastic Material Accessories Stainless Steel Post profile (mm) 60 x 40 x 2 Fence fastening Stainless steel rivet nuts already integrated into the post Screws for Clamps Stainless Steel Screws M8 Accessories (included) Pre-assembled plastic fastening attachments incl. rivet nuts, aluminium clamping tabs, fence screws M8 x 4 ...

125 running metres, 8/6/8 mm thickness, height 1.83 m Double bar mat fence complete set including posts and Clamp plate fastening material Fence elements: 1830 mm high and 2,500 mm long Posts for concreting: 2400 mm Number of fence elements: 50 pieces Number of posts: 51 pieces Total weight: 2200 kg Double rod mats material: Galvanized according to DIN EN 10244-2 and RAL 7016 powder-coated according to 10245-4 Fence tips: 30mm Mesh size: 50mm x 200mm Mat width: 2510mm Fence post material: Hot-dip galvanized according to DIN EN 10244-2 and RAL 7016 powder-coated according to EN10245-4 Post cap material: plastic Material accessories: stainless steel Post profile: 60 x 40 x 1.5mm Pre-assembled fastening attachments made of plastic incl. rivet nuts, clamping plates made of stainless steel, fence screws M8 x 40 stainless steel, Post caps without protrusion Location: Industrie ...

250 running metres, 8/6/8 mm thickness, height 2.03 m Double bar mat fence complete set including posts and Clamp plate fastening material Fence elements: 2030 mm height and 2,500 mm length Post for concreting: 2600 mm Number of fence elements: 100 pieces Number of posts: 101 pieces Total weight: 4800 kg Double rod mats material: Galvanized according to DIN EN 10244-2 and RAL 7016 powder-coated according to 10245-4 Fence tips: 30mm Mesh size: 50mm x 200mm Mat width: 2510mm Fence post material: Hot-dip galvanized according to DIN EN 10244-2 and RAL 7016 powder-coated according to EN10245-4 Post cap material: plastic Material accessories: stainless steel Post profile: 60 x 40 x 1.5mm Pre-assembled fastening attachments made of plastic incl. rivet nuts, clamping plates made of stainless steel, fence screws M8 x 40 stainless steel, Post caps without protrusion Location: Indu ...

62.5 m, 8/6/8 mm, height 1.83 m Double bar mat fence complete set including post and fastening material retaining plates Fence elements: 1830 mm high and 2,500 mm long Posts for concreting: 2400 mm Number of fence elements: 25 pieces Number of posts: 26 pieces Double rod mats Material (RAL) Galvanized according to DIN EN 10244-2 and powder-coated Fence Spikes 30mm Mesh size 50mm x 200mm Mat width 2510mm Fence post with clamp Material: Hot-dip galvanized, powder-coated according to DIN EN ISO 1461 and RAL 7016 Material: Post cap: Plastic Material Accessories Stainless Steel Post profile (mm) 60 x 40 x 2 Fence fastening Stainless steel rivet nuts already integrated into the post Screws for Clamps Stainless Steel Screws M8 Accessories (included) Pre-assembled plastic fastening attachments incl. rivet nuts, aluminium clamping tabs, fence screws M8 x 40, post caps  ...

Slide size 1520x1070 mm Slide stroke 254 mm Shots per minute 36 Opening between the uprights 1520x560 mm Worktop size 1520x1070 mm Revamping of the electrical system 2006 DISMANTLING AND LOADING COST: EURO XXXXXXXXXX The cost does not include any disposal of the oils present in the system, this will be invoiced during disassembly Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-11

with feed device Nominal force: 1000 kN Pneumatic pressure: 5 bar Permissible delay time: 210 ms Safety distance Tool operation: 336 mm Continuous stroke (interchangeable pulley): 50/80 rpm Single stroke: 45 rpm Working capacity in continuous stroke: 3500/5000 Nm Torque: 25,000 Nm Drive power: 11.5 kW with control panel and digital display CPS 20 with support frame Auction-ID: A7-46287-174

62.5 running metres, 8/6/8 mm, height 2.03 m Double bar mat fence complete set including post and fastening material retaining plates Fence elements: 2,030 mm high and 2,500 mm long Posts for concreting: 2,600 mm Number of fence elements: 25 pieces Number of posts: 26 pieces Double rod mats Material (RAL) Galvanized according to DIN EN 10244-2 and powder-coated Fence Spikes 30mm Mesh size 50mm x 200mm Mat width 2510mm Fence post with clamp Material: Hot-dip galvanized, powder-coated according to DIN EN ISO 1461 and RAL 7016 Material: Post cap: Plastic Material Accessories Stainless Steel Post profile (mm) 60 x 40 x 2 Fence fastening Stainless steel rivet nuts already integrated into the post Screws for Clamps Stainless Steel Screws M8 Accessories (included) Pre-assembled plastic fastening attachments incl. rivet nuts, aluminium clamping tabs, fence screws M8 x ...

75 running metres, 6/5/6 mm Height: 1.03 m Double bar mat fence complete set including post and fastening material retaining plates Fence elements: 1030 mm height and 2,500 mm length Posts for concreting: 1600 mm Number of fence elements: 30 pieces Number of posts: 31 pieces Double rod mats Material (RAL) Galvanized according to DIN EN 10244-2 and powder-coated Fence Spikes 30mm Mesh size 50mm x 200mm Mat width 2510mm Fence post with clamp Material: Hot-dip galvanized, powder-coated according to DIN EN ISO 1461 and RAL 7016 Material: Post cap: Plastic Material Accessories Stainless Steel Post profile (mm) 60 x 40 x 2 Fence fastening Stainless steel rivet nuts already integrated into the post Screws for Clamps Stainless Steel Screws M8 Accessories (included) Pre-assembled plastic fastening attachments incl. rivet nuts, aluminium clamping tabs, fence screws M8 x ...

62.5 running metres, 8/6/8 mm Height: 1.23 m Double bar mat fence complete set including post and fastening material retaining plates Fence elements: 1230 mm height and 2,500 mm length Posts for concreting: 1800 mm Number of fence elements: 25 pieces Number of posts: 26 pieces Double rod mats Material (RAL) Galvanized according to DIN EN 10244-2 and powder-coated Fence Spikes 30mm Mesh size 50mm x 200mm Mat width 2510mm Fence post with clamp Material: Hot-dip galvanized, powder-coated according to DIN EN ISO 1461 and RAL 7016 Material: Post cap: Plastic Material Accessories Stainless Steel Post profile (mm) 60 x 40 x 2 Fence fastening Stainless steel rivet nuts already integrated into the post Screws for Clamps Stainless Steel Screws M8 Accessories (included) Pre-assembled plastic fastening attachments incl. rivet nuts, aluminium clamping tabs, fence screws M8 ...

Volvo FH 500 6x2 (2018) – 610,000 km – with ampliroll system Truck in good general condition, ready to work. Equipped with an ampliroll system (hooklift) for containers up to 7m and less. Options and equipment: Volvo Dynamic Steering I-Shift automatic transmission On-board computer (suspension and lighting management) Recent tachograph Tires in good condition (recently replaced) Sleeper cabin Sold with AJK 3-axle container trailer (2018). OK MOT until 05/2026. Auction-ID: A3-43369-38054

The trailer is in good condition with user damage here and there. Has a hydraulic tipper. With ramps and with attachment boards. Auction-ID: A3-43369-34000

right working side equipped with belt sander left working side equipped with polishing brush revolutions: 1400/2800 rpm for further technical data see photographed nameplate Auction-ID: A7-46287-227

The trailer needs some love but is structurally ok. Here and that holes in the wood, aluminum side beams of the superstructure. Documents available, see photos. Auction-ID: A3-43369-34001

Load capacity: 950 kg Towing capacity: 2 Ton Light Cargo Euro 5 Towbar Double Cab Sliding door Electric windows Electrically adjustable exterior mirrors Central locking Radio/CD Cup holders Non-smoking car Auction-ID: A3-43369-5743

Working width 4500 mm; throughput 3-18 m/min; 2x5 machining sensors; and accessories Auction-ID: A1-43429-86

Operating voltage: 220/380 V Connection: 0.9 kW Rated current: 3.6/2.1 A Speed: 2900 rpm Grinding wheel dimensions: 200/230/51 mm Auction-ID: A7-46287-80

MACER agricultural tipping trailer. Type: Double-axle agricultural tipper Case dimensions: approx. 4.5 to 5 m long / 2.3 m wide Total length: approx. 6.5 to 7 m Connection: hydraulic + electric 12V Tyres: good overall condition ⚠️ Status: • Corrosion on the sides • Healthy overall structure Auction-ID: A3-43520-38015

Serial number: 1647 Nominal speed: 2830 rpm with two grinding wheels installed Max. grinding wheel diameter: approx. 180 mm Auction-ID: A7-46287-225

Renault Trafic 1.6 Diesel EURO 6 92,000 original kilometers Light Cargo Double Cab 6 Seats Towbar Air conditioning bluetooth / USB Electric Windows Power exterior mirrors Central locking Auction-ID: A3-43369-5024

Carnitech double shaft paddle mixer-grinder, type: 3224, number: 2391900, year of construction: 2004, 400 V, 3 Ph, plate diameter: 210 mm, total dimensions: 2700 mm x 2260 mm x 2200 mm. Including s/s trolley with knives and plates, dimensions: 1010 mm x 700 mm x 1000 mm.

Double transport belt, s/s frame, plastic belts, belt width: 600 mm and 340 mm, total dimensions: 4000 mm x 900 mm x 1800 mm.

(White, W 180 x H 75 x D 90cm) Auction-ID: A7-46320-56

The EPC 9/2 from HEKA Elektronik is a two-channel patch clamp amplifier that enables precise measurements in the voltage clamp and current clamp. The device is known for its exceptional signal quality, low noise values and stable performance – even during long test series. This model is particularly suitable for applications where simultaneous measurements on two cells or two independent membrane patches are required. --- Technical Highlights & Features: • Two independent channels (Double Patch Clamp) - Each channel with its own inputs for: - Probe (patch electrode) - Test input - External stimulus - Voltage and current monitor - Dual filter units Untested from Laboratory Closure Auction-ID: A7-46327-15

Electrically height-adjustable desks (on both sides) Perfect as a double workstation / bench solution Integrated table lamp with touch control Socket + USB-A & USB-C ports directly at the table Removable acoustic partition wall from Arper (various colours) High-quality, durable professional office furniture Dimensions: Total approx. 160 x 175 cm Table top each Auction-ID: A7-46320-16

Electrically height-adjustable desks (on both sides) Perfect as a double workstation / bench solution Integrated table lamp with touch control Socket + USB-A & USB-C ports directly at the table Removable acoustic partition wall from Arper (various colours) High-quality, durable professional office furniture Dimensions: Total approx. 160 x 175 cm Table top each Auction-ID: A7-46320-13

Electrically height-adjustable desks (on both sides) Perfect as a double workstation / bench solution Integrated table lamp with touch control Socket + USB-A & USB-C ports directly at the table Removable acoustic partition wall from Arper (various colours) High-quality, durable professional office furniture Dimensions: Total approx. 160 x 175 cm Table top each Auction-ID: A7-46320-17

equipped with 2x drawer cabinet, Please note! Chairs + accessories on and around the desk not included Auction-ID: A1-43992-352

Stainless steel housing for durability and hygiene, 2 permanently mounted grey cast iron baking plates with Ø 375 mm for even heat distribution, 2 on/off switches and 2 thermostats for precise temperature control Auction-ID: A1-45807-21

Electrically height-adjustable desks (on both sides) Perfect as a double workstation / bench solution Integrated table lamp with touch control Socket + USB-A & USB-C ports directly at the table Removable acoustic partition wall from Arper (various colours) High-quality, durable professional office furniture Dimensions: Total approx. 160 x 175 cm Table top each Auction-ID: A7-46320-14

Engine problem (see video) - bodywork looks neat, interior signs of wear (see photos) - sold without contents in cargo space Auction-ID: A3-43369-10626

Electrically height-adjustable desks (on both sides) Perfect as a double workstation / bench solution Integrated table lamp with touch control Socket + USB-A & USB-C ports directly at the table Removable acoustic partition wall from Arper (various colours) High-quality, durable professional office furniture Dimensions: Total approx. 160 x 175 cm Table top each Auction-ID: A7-46320-15

equipped with 2x drawer cabinet, Please note! Chairs + accessories on and around the desk not included Auction-ID: A1-43992-353

Lot Roebuck double ring spanners 21x23mm (20x) Condition: unused Weight: 11KG net Auction-ID: A1-46070-92

Rotor shear Loaded freely in working order. Cutting table weighing 25.5 tons 270 kw power

x-travel:14000 mm y-travel:3100 mm z-travel:1.200 mm (220 - 1.420) mm distance between columns:4.417 mm table-size:14.000 x 2.500 mm workpiece weight:15.000 kg/m drive capacity - spindle motor:25 kW spindle cone:63 HSK spindle turning speed range:18000 rpm milling feeds:30000 mm/min dimensions of the machine ca.:15.000 x 8.418 x 6.033 mm weight of the machine ca.:135 t CNC controller: SIEMENS 840 D universal milling head:5 Achsen mit ?C5C? Elektrospindel automatic tool changer:24 fach

faceplate diameter:4000 mm swing diameter:4300 mm turning height:2500 mm max. workpiece weight:63 t total power requirement:125 kW weight of the machine ca.:134 t dimensions:6100x10400x8400 mm Used Vertical Turret Lathe with 2 plungers and CNC Siemens 840 table is hydrostatically. Machine equipped with a grinding head. CNC was overhauled in 2000.

pressure:800 t distance between columns:2900 mm stroke:350 mm Controls:SIEMENS PRESS DESIGN:. - frame design : H-frame :. - Drive type : mechnical :. - openings in uprights : yes :. - number of cushions:0 - opening in table : yes :. - moving bolster : yes :. PRESS FORCES:. - total force (nominal):800 to PRESS TABLE:. - clamping surface (left-right):2800 mm - clamping surface (front-back):2800 mm - rectangular breakthrough (width):2000 mm - rectangular breakthrough (front-back):1800 mm - height above floor level:850 mm RAM:. - clamping surface (left-right):2800 mm - clamping surface (front-back):2800 mm - stroke:350 mm - number of strokes max:55 /min RAM (MECHAN. PRESS):. - ram adjustment:350 mm TOOL ASSEMBLY DIMENSIONS:. - shut height (stroke down, adjustment up):1100 mm - distance between columns (H-frame):2900 mm - Free passage between side columns (width):2560 mm ...

adjustment drive of the grinding spind.slide:0,0025 - 0,05 mm total power requirement:100 kW adjustment of grinding head slide:150 mm weight of the machine ca.:17 t grinding spindle drive:2 x 37 kW grinding width:30-150 mm peripheral speed:34 m/sec workpiece speeds:60 - 300 mm/Sek. grinding height:70 mm grinding wheel diameter:750 mm grinding tools:750 x 75 x 350 mm grinding wheel turning speeds:870 U/Min. max. workpiece diameter:250 mm

grinding height:-- mm grinding width:220 mm grinding wheel diameter:762 mm total power requirement:90 kW weight of the machine ca.:13 t grinding spindle 1 drive::37 kW grinding spindle 2 drive::37 kW Grinding machine for pre-grinding the connecting rod With 2 replacement spindle motors

x-travel:6500/13150 mm y-travel:4000 mm z-travel:1250 mm w-axis:2250 mm table surface area:5500/12150 x 3000 mm max. workpiece weight:70.000/105.000 kg ram head dimension:480 x 510 mm milling spindle motor:63 kW max. torque on the spindle:3300 Nm tool taper:DIN 39871 AD ISO 50 milling head speed:6,3 - 4000 U/min feed speeds:1 - 24000 mm/min w-axis:1 - 6000 mm/min distance between columns:3500 mm passage:3000 mm total power requirement:120 kW weight of the machine ca.:245 t dimensions of the machine ca.:29,0 x 7,7 x 8,1 m Machine is in nearly new condition and was completely modernized in 2020! With CNC SIEMENS 840 D Automatic tool magazine for 153 tool positions Automatic milling head magazine for 6 milling heads Machining module ? straight ? straight long ? Machining module ? angle standard ? 4000 rpm, 144 x 2.5°, ISO 50 Machining module ? narrow angle extended ? 40 kW, 4000 rpm, 1800  ...

pressure:250 t passage width:1280 mm stroke:bis 500 mm total power requirement:47 kW weight of the machine ca.:23 t dimensions of the machine ca.:2200 x 1850 x 4600 mm table surface area:1250 x 1000 mm dayligth:800 mm daylight between the side columns:520 x 750 mm table height above floor:1000 mm Documents: vorhanden

faceplate diameter:4000 mm swing diameter:4300 mm turning height:330 mm faceplate turning speed range:1 - 92 U/min workpiece weight:18 t feeds:1 - 4000 mm/min main drive motor:55 kW total power requirement:85 kVA weight of the machine ca.:64 t dimensions of the machine ca.:90, x 7,2 x 5,5 m with CNC SIEMENS 840 D for 4 axis 2 Vertical Supports tool Basic holder chip conveyor

faceplate diameter:4770 mm swing diameter:7000 mm turning height:1000 mm slide stroke:1000 mm workpiece weight max.:100000 kg faceplate turning speed range:2 - 20 U/min feed speeds:1 - 10000 mm/min rapid traverse:10 m/min ram head dimension:250 x 250 mm main drive:100 kW total power requirement:200 kW with CNC SIEMENS 840 D 2 Vertical Supports with toolchanger 12 pockets C-axis and driven tooling SK 50 37 Kw 3000 rpm Chip conveyor and coolant attachment

faceplate diameter:5000 mm swing diameter:6100 mm turning height:2400 mm ram stroke each side:1490 mm ram head dimension:340 x 340 mm max. workpiece weight:100.000 kg total power requirement:100 kW weight of the machine ca.:155 t faceplate turning speed range:0,4 - 50 U/min with 2 x 2 axes CNC SIEMENS 840 D

x-travel:6500/13150 mm y-travel:4000 mm z-travel:1250 mm w-axis:2250 mm table surface area:5500/12150 x 3000 mm max. workpiece weight:70.000/105.000 kg ram head dimension:480 x 510 mm milling spindle motor:63 kW max. torque on the spindle:3300 Nm tool taper:DIN 39871 AD ISO 50 milling head speed:6,3 - 4000 U/min feed speeds:1 - 24000 mm/min w-axis:1 - 6000 mm/min. distance between columns:3500 mm passage:3000 mm total power requirement:120 kW weight of the machine ca.:245 t dimensions of the machine ca.:29,0 x 7,7 x 8,1 m The machine is in mint condition and was generally overhauled in 2020! with CNC SIEMENS 840 D autom. tool magazine for 153 tool stations autom. milling head magazine for 6 heads milling heads - straight - straight extended length - milling head -angular head standard - 4000 rpm, 144 x 2,5°, ISO 50 milling head -angular small extended length -40 kW, 4000 rpm, 1800 Nm,  ...