double side maschine used for sale

Cutting length: min/max at 90 ° 330/5000 mm blade diameter: 450/500 mm kl.90°: 330 mm blade diameter cutting length: 450/500 mm Drive motor per unit: 2,2 kW Electr. Supply: 400 V, 5.2 kW Space requirements: 6760 x 1590 x 1700 mm weight: 1550 kg

PRECAST LINE VOLLERT FILIGREE AND DOUBLE WALL LINE precast Filigree and double wall production

P2 - used 40 m³ / 40,000 litres steel tank, double walled, above ground or as underground tank, on 2 steel bases, in good condition. dimensions: diameter approx. 2.5 m (without base) length about 8.90 m height incl. base approximately 2.78 m base width approx. 0.90 m Stainless steel tank DIN6616 D, double-walled, inside plain steel, 2 steel bases. Former isopropanol tank / chemical tank. On request this tank can be refitted for ground installation with a bitumen coating on the outside. The container can be used as storage tank for water, manure, AHL, ASL, seeping juice, canola oil, nutritional oil, as rainwater cistern etc. Price upon request. Item location is 79098 Freiburg im Breisgau. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, feel free to ask us. It is not possible to update all our advertisements daily. Sinc ...

Grinding wheel diameter x W: 200 x 32 mm Grinding wheel bore: 32 mm Grinding wheel grain: K 36 / K 80 RPM: 2850 RPM S1 engine power output 100%: 0.90 kW Motor power S6 40%: 1.25 kW Voltage: 400 V Width: 510 mm Depth: 270 mm Height: 310 mm Weight: approx. 25 kg Scope of delivery: Roughing wheel K 36 Simple disk K 80 Spark cover on both sides Workpiece support Base extra charge available. Special price including delivery to 1 address Germany (Mainland).

Poly-clip PDC 700 semi-automatic double-clipper, year of construction 2002, for fibrous, plastic, natural and collagen casings, calibres up to 115 mm, sits on a trolley, suitable for following clip sizes: S 735 / 740 / 744, air pressure: 4-6 bar, refurbished. The machine is immediately available and can be tested in Koblenz, Germany.

Description: heavy double grinding buck (Leipzig Iron and Steel Works) with chip container Technical data Grinding wheel permeser 400 mm Operating voltage 380 volts Drive power 4 KW Weight approx. 340 kg Dimensions (LxWxH) 1100 x 1150 x 1120 mm

Ready exhibition machine built in 2016 Mercodor ZM 44 Cutting Chamber 500 x 380 mm knife 14 3 mm hook drive 7,5 kw

Double grinding buck Rema with cue equipment, large collecting tray, new condition. Grinding wheel diameter 300mm, 1.8kw Special price

Rexroth double valve 4WRKE 25

Twin Shaft shredder mod. ITS850x550E- 22 kW. Heavy duty construction. Shredding chamber dimensions 8500x550 mm with n°2 counter-rotating hexagonal shafts fitted with n°28 blades with a thickness of 30 mm, 1 hook double spaced to 60mm. Including n°1 main gearbox with straight spur gears for fast and slow shaft. Driven by n°1 x 22 kW motor The shredder is supplied complete with supporting stand, feeding hopper. The electric control panel of this shredder will be fitted with a Siemens PLC to control the working logic of the shredder including the automatic shafts reversal system in overloading conditions, a display will show the working parameters and operating conditions. The total weight of the shredder is around 3.000 Kg.

Two-shaft shredder KS 1000/2 INDIVIDUAL - ADAPTABLE - ON YOUR RIGHTS Product information The 2-wave shredder KS 1000/2 is a powerful shredder that has a completely mechanically machined, solid grinding chamber. It is composed of 4 parts which are completely plugged into each other and screwed together, this gives an enormous stability and is very maintenance-friendly. The machine is powered by 2 high-performance electric motors that drive hexwaves running against each other via high-quality and robust planetary gearboxes 2. The hexagonal shafts can be equipped with individually made cutting discs of different thicknesses. The grinding chamber of the KS 1000/2 is double protected by wear plates and wear rings and is therefore completely armoured against wear. specifications: -Cutting room: 1000×600 -Drive: 2x15kW -Speed per shaft: 16.5 rpm -Advantage: Constant torq ...

Many thanks for your interest on our Frisse double Z kneader, please find follow our offer: Manufacturer : Richard Frisse Herford Type : ZK 25 Kneader Year of manufacturing : 1986 Electrical : 380 VAC complete volume : 250 l usable Volume : 200 l Dimensions : ca. 2030x1000x1300 (l/w/h in mm) Weight : ca. 2000 kg Different : Condition OK trough tiltable We offer this machine in as is – where it is” condition, without warranty ex Warehouse Hess. Lichtenau (EXW), unpacked

Brand new machine designed for screwing reinforcements in PVC profiles. - simultaneous operation of both screwing units - separately adjustable distance between screwdrivers 250-540 mm - automatic screw feeding - automatic disconnection of the feeder movement - screw depth sensor - foot switch control Additional equipment: - machine base - pick-up rollers - pneumatic impulse to the feeder (13mm), preventing jamming of the screws in the feeder at the entrance and exit - feed force pressure reducer - additional manual slot for various screws - extended travel +30 mm to 130 mm - laser positioning pointer - screw depth sensor - horizontal pressure

Double finisher 842 Multimatic with control year 08/2014, NP 20110 € Wardrobe former and trouser topper rotatable on one column Finishing process in closed cabin Integrated cabin extraction automatically controlled Doors close automatically Flexible processing of different wardrobes and sizes Computer control with nine freely programmable memory slots Air volume regulation for particularly sensitive wardrobe space-saving and almost no loads in the working area due to finishing process extraneous steam heated or fully electric with built-in electric steam generator Are you looking for an all-rounder for jackets & Co? - Multimatic Double Finisher 842 With the Multimatic double finisher 842, jackets, jackets, coats, trousers and the like can be finished automatically. It consists of a shape finisher and a trouser topper. The two devices are rotatable attached to a column. ...

Double finisher 842 Multimatic with control year 09.2006, Np 20110 € Wardrobe former and trouser topper rotatable on one column Finishing process in closed cabin Integrated cabin extraction automatically controlled Doors close automatically Flexible processing of different wardrobes and sizes Computer control with nine freely programmable memory slots Air volume regulation for particularly sensitive wardrobe space-saving and almost no loads in the working area due to finishing process extraneous steam heated or fully electric with built-in electric steam generator Are you looking for an all-rounder for jackets & Co? - Multimatic Double Finisher 842 With the Multimatic double finisher 842, jackets, jackets, coats, trousers and the like can be finished automatically. It consists of a shape finisher and a trouser topper. The two devices are rotatable attached to a column. ...

Manufacturer: SUPERVAC Type: GK 290B Packaging machine with gassing Automatic lid lifting. Digital control with 10 programmes. Chamber dimensions 802 x 757 x 300 mm Front sealing strips 2 x 550 mm Side sealing strips 4 x 700 mm Mounting tape L 700 x W 465 mm Product after packaging (vacuum or gas) Distance between welding beams 550 mm Maximum product length 720 mm Product mounting tape, smooth, length 2000 x width 500 mm plus coral band L 980 x W 520 mm Power supply: 9 kW Compressed air connection: 50 l/min 6 bar Machine dimensions L 1610 x W 1130 x H 1116 mm Weight: 530 kg Without vacuum pump Request a quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT No.: PL547-17-47-669 Phone 0048/33 812 58 60

DESCRIPTION ITS twin-shaft shredders with low speed and high torque designed to guarantee high performance and maximum reliability in the shredding of tough or bulky materials. Their solid and sturdy construction surpasses any other shredder on the market. As previously said: Given the large size of the grinding chamber and the solid construction, they are particularly suitable for grinding bulky and tough products such as wooden pallets, cardboard cores, metal scraps of various kinds and sizes, stacks of paper / cardboard sheets and many other materials that are usually difficult to grind. APPLICATIONS Large rolled up carpet Cardboard cores Pile of cardboard sheets Metal scraps WORKING PRINCIPLE The material is fed through a loading hopper placed above the grinding chamber which contains two rotating hexagonal shafts, equipped with circular blades of prede-fined thickness w ...

New machine 24 months warranty available from September 2023 - pre-orders possible! Advantages: + Double-arm mixer as a robust, ergonomic table model + higher hydration possible compared to the spiral mixer + Your doughs will last longer and stay fresh longer + depending on the type of dough, a TA of up to 200 is possible + excellent for pizza / bread doughs, as well as very sensitive doughs + mixes ingredients very gently into the dough + less dough heating than conventional spiral kneading machines + Stainless steel boiler and double-arm kneading tool + Kneading arms are dishwasher safe and can be removed quickly and without tools + transparent flour dust hood (soft-close) with automatic switch-off + simple, digital control + 10 kneading levels with timer and 5 speeds adjustable + very smooth-running motor, power transmission by belt drive Technical data (according ...

mytron 160 K CO2 Double Incubator The CO2 Incubator 160 / 160K provides the "in vitro" growing cell and tissue cultures with environmental conditions that are very close to the physiological values of the organism. Interior volume: approx. 160 l Weight: 70 kg Recirculating air circulation: by fan Cooling: Cooling unit Temperature display: Setpoint and actual value display Temperature range: 5 °C above room temperature to 70 °C Temperature range (cooled): +15°C to 70°C at 23°C ambient Temperature constancy: +/- 0.2 K temporal Humidity display: setpoint and actual value display Humidity range: >/=95 % Moisture resistance: +/- 2.5 % CO2 display: setpoint and actual value display CO2 range: 0% to 20% CO2 CO2 constancy: +/- 0.2 % CO2 CO2 recovery time: 1% CO2/min Power supply: 230 V, 50 Hz, 2 x 8 AT WxHxD= 130x85x70 cm More items new and used - you can find them i ...

mytron 160 K CO2 Double Incubator The CO2 Incubator 160 / 160K provides the "in vitro" growing cell and tissue cultures with environmental conditions that are very close to the physiological values of the organism. Interior volume: approx. 160 l Weight: 70 kg Recirculating air circulation: by fan Cooling: Cooling unit Temperature display: Setpoint and actual value display Temperature range: 5 °C above room temperature to 70 °C Temperature range (cooled): +15°C to 70°C at 23°C ambient Temperature constancy: +/- 0.2 K temporal Humidity display: setpoint and actual value display Humidity range: >/=95 % Moisture resistance: +/- 2.5 % CO2 display: setpoint and actual value display CO2 range: 0% to 20% CO2 CO2 constancy: +/- 0.2 % CO2 CO2 recovery time: 1% CO2/min Power supply: 230 V, 50 Hz, 2 x 8 AT WxHxD= 130x85x70 cm Buy incubators and other products at low pric ...

Cylindrical storage tank, factory new Capacity: 60 cbm / Medium: Fuel oil Material: S235JR (St 37.2) raw inside, blasted outside, primed and painted in RAL 7035 - light grey Dimensions: 2,500 mm diameter, 12,650 mm full length Design: according to DIN 6616/2 or DIN EN 12285-2, double-walled Test pressure inner tank 2 bar test overpressure Double jacket 0.6 bar incl. control fluid in double jacket for above-level storage with test certificate and documentation Container equipped with GOK Lag 2000 and limit sensor as overfill protection Equipment: 1 dome 600 mm li.W. with cover, gasket and screws 3'' filling cable with TW coupling 3'' Vent with cap 1 1/4'' Suction line with reduction to 1'' 1'' for limiter GWG 23-Ro 1'' nit dipstick 2'' reserve 1 pair of permanently welded steel saddle feet 1 suspension ladder with pedestal, galvanized according to UVV  ...

The machine has been overhauled in the workshop. It was repaired, defective parts were replaced and functionally tested . The spindle bearing has been renewed, the rotary table drive has been overhauled Specifications Vertical grinding spindle assembly Workpiece diameter up to 30 mm Max. workpiece height 10/20 mm Grinding wheel diameter 300 mm Grinding wheel rotation speed 35 m/s Workpiece feed 1.5 to 15 m/min Drive power grinding wheel motor 2 x 22 kW Total drive cable approx. 50 kW Machine weight approx. 4.5 t Total space requirement approx. L x W x H 3.3 x 2.6 x 2.6 m The DISKUS DDS 300 RPD has been completely dismantled, cleaned, assembled and functionally tested. Spindle bearings and rotary table drive have been overhauled. Equipped by the manufacturer for grinding with CBN discs. The machine can be viewed by arra ...

Condition: Workshop overhauled, ready for demonstration and use, tested The DISKUS DDS 457 II CL was completely dismantled, cleaned, defective parts replaced and functionally tested. Specifications Grinding spindle: 2 pieces vertical Grinding process: Continuous process Workpiece width up to 60 mm Max. workpiece height 1-60 mm Grinding wheel diameter: 457 mm Grinding wheel rotation speed 24 m/s Workpiece feed 25 to 250 mm/min Drive power grinding wheel motor 2 x 15 kW Total drive cable approx. 35 kW Machine weight approx. 3.7 t Total space requirement approx. L x W x H 1.4 x 1.0 x 2.7 m Accessories: Replacement flanges – Errors, modifications and prior sale excepted –

Double grinding machine TS 300 SD P with SUCTION, machine stand, emergency stop push button and brake smooth-running, maintenance-free motor Protective covers closed at the sides Stable, adjustable workpiece supports High level of safety comfort thanks to adjustable spark deflectors suitable for grinding, deburring and sharpening tools of all kinds, metal profiles, etc. Motor Circuit Breakers and Undervoltage Trippers Double-sided spark/eye protection connection cable with CEE plug 16 A 1 grinding wheel each coarse and fine 12 months warranty for single-shift operation - Grinding wheel (mm): 300 x 40 x 51 - Machine dimensions without packaging (mm): 540 x 530 x 1,180 mm 230 - Speed (1/min): 1250 - Three-phase motor 400 V / 2.2 kW: operating mode S2-30 min (short-term operation) - Extraction motor 0.55 kW, suction power 350m³/h - Weight (kg): 90 Shipping time:immedia ...

Double grinding machine TS 200 SD P with SUCTION, machine stand, emergency stop push button and brake smooth-running, maintenance-free motor Protective covers closed at the sides Stable, adjustable workpiece supports High level of safety comfort thanks to adjustable spark deflectors suitable for grinding, deburring and sharpening tools of all kinds, metal profiles, etc. Motor Circuit Breakers and Undervoltage Trippers Double-sided spark/eye protection connection cable with CEE plug 16 A 1 grinding wheel each coarse and fine 12 months warranty for single-shift operation - Suction nozzle Ø (mm): 42 - Grinding wheel (mm): 200 x 32 x 32 - Machine dimension without packaging (mm): 250 x 470 230 - Speed (1/min): 2550 - Three-phase motor 400 V (kW)1: Operating mode S2-30 min (short-term operation) - Weight (kg): 60 Shipping time:immediately, from stock

New machine 24 months warranty Advantages: + Double-arm kneader as a robust, mobile model with swivel wheels + higher hydration possible compared to spiral kneader + Your doughs will last longer and stay fresh for longer + depending on the type of dough, a TA of up to 200 is possible + excellent for pizza / bread doughs, as well as very sensitive doughs + mixes ingredients very carefully into the dough + less dough heating than with conventional spiral kneading machines + Kettle and double-arm kneading tool made of stainless steel + Kneading arms are dishwasher safe and can be removed quickly and without tools + transparent flour dust hood (soft-close) with automatic switch-off + simple, digital control + 10 kneading levels with timer and 5 speeds adjustable + very smooth running motor, power transmission by belt drive Technical data (according to manufacturer's speci ...

ID3344 Double roller crusher year/Baujahr 2015 230 t Double roller crusher including conveyor belt 1600 mm x 12.2 m, including 2x discharge belt (Mobcon) 1400 mm x 40 m, including transfer station approx. 1.8 m x 1.8 m, feed hopper length = 4.5 m, width = 6 m, content approx. 30 cbm, apron conveyor with crawler chain, apron conveyor width 1800 mm, apron conveyor length approx. 9.5 m, cleaning conveyor belt 2000 mm x 5.3 m, including electrical equipment and control Double roll crusher incl. conveyor belt 1600 mm x 12.2 m, incl. 2x discharge belt (Mobcon) 1400 mm x 40 m, incl. transfer station approx. 1.8 m x 1.8 m, feed hopper length = 4.5 m, width = 6 m, capacity approx. 30 cbm, apron conveyor with crawler track, plate belt width 1800 mm, plate belt length approx. 9.5 m, cleaning conveyor belt 2000 mm x 5.3 m, incl. electrical equipment and control system

Machine grinds in linear pass, Extremely robust design. Specifications: Workspace: Largest sanding width 150 mm Highest working height for new grinding tool (workpiece passage) 50 mm Diameter of the grinding wheels 600 mm Speed upper grinding wheel 765 rpm Lower grinding wheel 765 rpm Circumferential speed: upper grinding wheel 24 m/s Lower grinding wheel 24 m/s Dimensions of the abrasive tools: Ø 600 x 75 x Ø 50 mm Workpiece feed speed infinitely adjustable from 35 to 350 mm/s Grinding wheel infeed: Total travel per grinding wheel 150 mm Grinding wheel feed servo motor controlled Dressing Unit: Servo Motor Controlled Grinding motors: 30KW Ges. Power requirement approx. 62KW Dimensions of the machine: Length approx. 2750 mm Width approx. 2050 mm Height: approx. 3000 mm Footprint: Length: approx. 4350 mm Width: approx. 5020 mm Weight: 6500 kg The m ...

EiMa double cross-cut saw DKS 123 and accessories, built in 2010, very good condition (has been regularly serviced). New price at that time - approx. € 55,000.00 saw, € 15,000.00 accessories Specifications: Manufacturer: EiMa Maschinenbau GmbH, Frickenhausen Type: GKS 123 Type of current: 230/ 400V / 50 Hz Operating voltage: 400 V Control voltage: DC 24V Machine power: 23 kW Rated current: 44 A Dimensions approx. Length: 6.40 meters Width: 5.37 meters Height: 1.10 meters Weight: 2.2 tons The accessories consist of the photos, various replacement profile cutter heads (partly from Leitz-Variform and as good as new in original packaging) etc. The double deflection saw is currently still at our customer in Gerolstein and was taken out of service on 23.10.2024 - due to a restructuring. Only the offered machine and accessories are expressly sold, any things th ...

Manufacturer: Torwegge, Type: H634.1, Year: ca. 1996, Year :ca. 1996

Complete Zn drum system, double row, footprint 21 x 7 m, built-up operational condition any components NEW and unused (only test run with water) 11 stations zinc bath à approx. 0.8 m³ / wet turner / 19 static rinsing, pre-- post-treatment / loading - unloading Manufacturer: Fey Galvanotechnik, Solingen / year 2020 (individual components partly 2019) The system essentially consists of: ATB S7 control system in 12x Rittal cabinets, Simatic HMI Touch Tank park: 1x stainless steel tub (double E-def), 15x PP bathtubs (triple, double and single tubs) Drain ball valves, level bar probes, temperature sensors Immersion bath warmer: 20x double E-def, 16x single E-def, 12x zinc bath, 2x zinc electrolyte attachment, 9x (3x each) thick layer, blue, yellow; Rotkappe T-QS 630/1,25-230Ws, 1250W Oil separator (degreasing): Stainless steel Friess W20 31x drum units: filling volumes up to  ...

Used Flottweg B-800 double-belt press (PD6000). New: 2015 Technical data: Type: B-800 Hourly throughput [t/h]: 2-6 Belt width [mm]: 800 Drive power [kW]: 1.5 Electrical connection [V/A]: depending on the country of installation Pneumatic connection [bar]: 6 Design and operating principle: 1. The product is continuously fed into the feed box and evenly distributed on the lower belt. The height and width of the cakes can be adjusted to the specific product. 2. In the wedge zone, the upper belt is pressed against the product. A slow increase in pressure creates a stable product cake. 3. In the extrusion area, the cake is dewatered, first using a special profile roller, which ensures rapid liquid drainage to both sides of the cake. 4. The product is then effectively dewatered by pressure rollers with gradually decreasing diameters and increasing pressure. 5. Optional linea ...

Roll-up station 0422 year 1996; ready for operation

Double-acting hydraulic cylinder, CK-80/56x0800-L004-H-B1X, Atos, new Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, Technical information: - Double-acting hydraulic cylinder with swivel eye - Specially manufactured for Frech/Weingarten die casting machines - Suitable for GDK 2000 to GDK 4100 machines - Frech item number 949390 - Piston diameter 80 mm, piston rod diameter 56 mm - Max. stroke 800 mm, piston rod thread M27 x 2 - Centre of swivel eye to retracted piston rod face 510 mm - Swivel eye d40 mm 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund th ...

wire diameter: 3,0 - 5,5 mm nail length: 15 - 80 mm output: 150/300 St./min. -for steel pins-; very good

Double bench grinder, double grinding machine, pedestal grinder, bench grinder, drill grinding machine -Grinding disc: max. Ø 200 x 30 mm -Speed: 2800 rpm -Motor power: 0.74 kW -Operating voltage: 380 volts

CNC double-staender coordinate drilling rig with deep drilling support Kolb KBN G 120 year 1984 / Converted to Heidenhain TNC 426 in 2006 table size 4250 x 2200 mm Table load 14 t Table laengsweg X 3000 mm Main Spindle crosspath Y 2180 mm deep drilling spindle crossing path A - 2000 mm spindle vertical path 500 mm Distance between the stems 2640 mm; spindle - table 100 - 1300 mm; spindle diameter 224 mm Spindle drive power 46 kW spindle speeds 14 - 1400 rpm spindle holder ISO 50 Drilling in steel ST60: 100 mm diameter; drill up to 300 mm; threaded cutting up to M 125 x 3; frard power 730 cm3r/min.; SECOND SUPPORT SUPPORT: spindle speeds at BTA and ELB drilling 315 - 3150 rpm high high pressure oil Offer number V(B)-5234; Very good

Double tool holder, double tool holder, double tool holder for turning tools -Size: 120 x 120 mm -Schuck holder: 33 x 49 mm -Bore: Ø 25 mm -Resses: Ø 80 mm -Weight: 5.9 kg

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Double grinding machine: Type ES200 PW -Grinding discs: max. Ø 230 mm -Motor: Power 0.55 kW -Speed: 2800 rpm -Voltage: 380 V -Dimensions: 510/320/H1230 mm -Weight: 54 kg

CNC Double column Coordinate Boring Machine with Deep Hole Drilling Support Kolb KBN G 120 Year of manufacture 1984 / Retrofitted with Heidenhain TNC 426 in 2006 Table size 4250 x 2200 mm Table load max. 14 t Table longitudinal travel X 3000 mm Main spindle cross travel Y 2180 mm Deep hole drilling support cross travel A - 2000 mm Spindle vertical travel Z 500 mm Distance between the columns 2640 mm; Spindle to table 100 - 1300 mm; Spindle diameter 224 mm Spindle drive motor rating 46 KW Spindle speeds 14 - 1400 rpm Spindle taper ISO 50 Drilling in steel ST60 : 100 mm diameter; Boring to 300 mm; Threading to M 125 x 3; Milling capacity 730 cm³/min.; Second support for Deep Hole Drilling Spindle speeds for BTA and ELB boring 315 - 3150 rpm High pressure cutting oil delivery to spindle Chip- and oil collection and separation via Centrifuge. Very good condition P ...

Double bench grinder, double grinding machine, pedestal grinder, bench grinder, drill grinding machine -Grinding disc: max. Ø 200 x 32 mm -Speed: 3000 rpm -Engine power: 0.9 kW -Operating voltage: 380 volts -Dimensions: 1100/540/H1140 mm -Weight: 125 kg

Folding machine RAS 22.11 - see pictures, Stand fold / double-standing fold

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 1.5 kW -Speed: 1420 rpm -Max. grinding wheels: Ø 350 x 32 mm -Operating voltage: 380 volts -Dimensions: 740/600/H1175 mm -Weight: 238 kg

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Engine power: 1.1 kW -Grinding discs: 300 x 40 -Operating voltage: 380 volts

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder, tool grinding machine -Motor power: 1.1 kW -Speed: 1410 rpm -Grinding discs: Ø 300 mm -Operating voltage: 380 volts -Dimensions: 1080/480/H1240 mm -Weight: 252 kg

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 0.75 kW -Speed: 3000 rpm -Max. grinding wheels: Ø 200 x 32 mm -Operating voltage: 380 volts -Dimensions: 540/280/H1230 mm -Weight: 116 kg

automatic double mitre saw OMS SALVARANI INVINCIBILE OK 330 CE standard : Yes n.02 motors . power Hp 3 each one blades diam.mm.330 max. useful cutting length mm.3000 max. useful cutting width 90° mm. 165 max. useful cutting width 45° mm. 115 max. useful cutting heigth mm.115 volt. 380/50 weigth kgs.650

P108 - used approx. 40 m³ / 40,000 litres polyester tank / GRP tank, double-skinned, flat bottom tank, Speidel tank, including as new ullage device(approx. one year). Manufacturer Speidel, aboveground storage tank, vertically standing on flat bottom, in good condition. volume: approx. 40 m / 40,000 litres material: polyester / GRP diameter: approx. 3.00 m height: approx. 6.50 m year of construction: 2001 Double-skinned, for media with a specific weight of up to 1.4 kg / litre. The container can be used as a storage tank for many different media. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us  ...

Double hydraulic pump, oil pump, gear pump -PTO shaft diameter: Ø 34 mm Quantity: 1 piece available -Dimensions: 440/180/H155 mm -Weight: 35 kg

Double bench grinder, bench grinder, column grinder, column grinder, Cut-off machine, polishing machine, polishing stand -Motor power: 0.45 kW -Speed: 2,800 rpm -Max. Grinding wheels: Ø 150 x 20 x Ø 32 mm -Operating voltage: 400 volts -Dimensions: 650/700/H1500 mm -Weight: 198 kg