double side maschine used for sale

Four-sided planer WEINIG P23 -used-6 spindles reversible knife system, profile device, electric height adjustment, lubricant pump, dust tested---------- Technical data ----------planing width: 230 mm, planing height: 120 mm, number of spindles: 6, motor spindle 1: 5.5 kW, motor spindle 2 + 3: 7.5 kW, motor spindle 4: 7.5 kW, motor spindle 5: 5.5 kW, motor spindle 6: 4 kW, feed speeds: 5-24 m/min., suction nozzle Ã: 6 x 140 mm, dimensions (LxWxH): 4,000 x 1,700 x 1,600 mm, weight: 3,200 kg

Viewing by appointment Auction-ID: A1-40243-103

Viewing by appointment Auction-ID: A1-40243-12

Cantilever rack MECALUX1-sided, built in 2021, 4 stands each approx. 400x160 cm, floor-standing, approx. 20 outriggers each approx. 160x6b cm, without contents

- Lot of 6 cargo carts on one side. - Dimensions of each trolley approx. 1700 x 1150 x 2100 mm. - 4 swivel plastic wheels. - Operating conditions of these trolleys: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-740

- Lot of 6 cargo carts on one side. - Dimensions of each trolley approx. 1700 x 1150 x 2100 mm. - 4 swivel plastic wheels. - Operating conditions of these trolleys: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-750

- Lot of 6 cargo carts on one side. - Dimensions of each trolley approx. 1700 x 1150 x 2100 mm. - 4 swivel plastic wheels. - Operating conditions of these trolleys: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-746

- Lot of 8 cargo carts on one side. - Dimensions of each trolley approx. 1700 x 1150 x 2100 mm. - 4 swivel plastic wheels. - Operating conditions of these trolleys: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-752

- Lot of 6 cargo carts on one side. - Dimensions of each trolley approx. 1700 x 1150 x 2100 mm. - 4 swivel plastic wheels. - Operating conditions of these trolleys: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-744

- Lot of 6 cargo carts on one side. - Dimensions of each trolley approx. 1700 x 1150 x 2100 mm. - 4 swivel plastic wheels. - Operating conditions of these trolleys: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-748

Excellent condition - Fully operational - Loading / Transport possible! Working width 13 to 230 mm Working height 6 to 120 mm Number of spindles 4 Motor power of dressing spindle 4 to 7.5 kW Motor power of vertical spindles 5.5 to 11 kW Motor power of upper spindle 4 to 11 kW Feeder motor power 1.5 kW Diameter of spindles 40 mm Tool flight circles of throat spindles 125 to 200 mm Adjustment range of spindles axial 30 mm Adjustment range of dressing spindle 5 mm Feed rate 8 m per minute Diameter of feed rollers 140 mm Width of feed rollers 2 x 50 mm Width of roller in outfeed table 50 mm Adjustment range for dressing table and ironing ruler 10 mm Height of right stops 60 mm Length of dressing table 2000 mm

Fixed side at the left Feedspeed 18 - 25 m/min Working width min 60mm for panel thickness 22mm, 105mm for panel thickness 40mm Panel overhang 30mm Panel thickness 8 - 60 mm in stead of 12 - 40 mm (with limitations) Coil edge thickness: 0,3 - 3 mm, strips 0,4 - 20 mm Coil diameter 830 mm Equipment: Sprayers release agent Squaring device with 2 motors each 3 kW Edge heating Edge magazine for 2 coils, guillotine for edges up to 3 mm Glueing part A20 with quickmelt application Lateral pressure zone K, 1 driven and 6 after pressing rollers End trims HL84, 2 motors each 0,8kW Rough trimming, 2 motors 1,5kW Contour trimming, 2 exchange units Profile scraping PN10 Flat scrapers FA11 Sprayers cleaning agent Buffing Automation package straight/chamfer: -Automatic adjustment infeed fence -Automatic setting of pressure rollers -Pneumatic setting of end trims -Pneumatic setting of rough trims -Automa ...

Workpiece thickness: 8 - 90 mm, electronically adjustable Feed rate: 18-32 m/min frequency controlled Edge thickness: 0.3 - 3 mm for roll edges, strips up to 20 mm Equipment: Inlet guide automatically adjustable via the control, extension 500 mm Joint milling unit: 2 x 3.0 KW workpiece preheating Gluing unit A34 edging magazine for roll Pressure zone with 1 driven, 6 non-driven rollers, automatic adjustment from the control Cutting unit WK14, straight, 2 motors 0.8 kW Pre-milling unit: 2 x 1.5 KW, pneumatic adjustment Form milling unit FF 12 automatic, 2 motors 0.4 kW radius/phase milling unit FF12 automatic 4 motors 0.4 KW universal milling aggregate controlled UF11, 4 kW Profile scrapers PN20 Glue scrapers Nozzles for detergent and anti-stick Polishing unit Control: Power Control PC22

Single sided edge bander with hot melt, fixed side at the right, pre-milling unit Edge thickness: 0,4 to 12 mm Workpiece thickness: 8 - 60 mm Feedspeed 8-20 m/min (limited to 10 m/min using the contour trimming) Workpiece transport by chain, top pressures with rubber rollers Sound enclosure over all trimming motors Equipment: Adjustable fence Pre-milling with 2 shapers, each 2,2 kW Coil and strip magazine Hot melt unit, Quickmelt type Pressure zone with1 driven and 2 non-driven pneum. Loaded rollers End trims, 2 x 0,35 kW motors, straight and chamfer 15? Top/bottom trimming, motors 2 x 0,35 kW Radius trimmming Contour trimming unit, leading and following edge, 2 x 0,35 kW Radius scraping unit Glue scrapers Buffing unit Controlls PC 20+

Panel thickness: 8 - 50 mm Thickness of the edges: 0,4- 3 mm Feed speed 8 - 11 m / min PU pressure rollers Equipment: Squaring unit, 2 motors 2,2 kW Panel edge heating Edge magazine for coil and strips Hot melt application with roller Airtec AT4510 unit The Airtec aggregate is positioned so you can use Airtec or the standard glue pot Motorized side pressure unit End trims, 2 motors, pneumatic positioning straight and with chamfer trimming unit above / below Contour trimming unit Profile scraping unit Glue scraping unit Polishing unit Detergent spray system central lubrication

Workpiece thickness: 8 - 50 mm Edge thickness: Coil edges 0.4 - 3 mm Feed speed 10 m/min Equipment: manual height adjustment. Joint milling unit, 2 motors Panel edge heating Gluing area Pressure zone 1 driven and 2 non-driven rollers End trims, 2 x 0,8 kW motors, straight and chamfer 15? Top and bottom trimming Profile scraping unit for PVC edging Glue scrapers

Motorised height-adjustment Sound enclosure over all trimming motors Equipment: Coil and strip magazine Hot melt unit Pressure zone End trims, chamfer and straight, automatic adjustment Top/bottom rough trimming Top/bottom fine trimming, tilting, Contour trimming unit Scraping unit Buffing unit return conveyor Ligmatech ZHR 05

Nominal lifting capacity: 5000kg Center of gravity distance: 600mm Total lifting height: 3.3m Engine: FORD Transmission: Grazziano

Weinig Unimat 2000 four-sided planer Working width 230mm Working height 160mm Number of spindles 8 Spindle system Down 11kw 12.000r.p.m Right 7.5kw 6000r.p.m Left 11kw 12.000r.p.m Right 7.5kw 12.000r.p.m Mountain 11kw 12.000r.p.m Down 7.5kw 12.000r.p.m Mountain 11kw 12.000r.p.m Down 30kw 6000r.p.m Inverter-adjustable feed speed up to 36m/min 4 drive rollers in the work table Pneumatic Material Clamps Total power of the machine 106kw Year of manufacture 2002

Viewing by appointment Auction-ID: A1-40243-121

Viewing by appointment Auction-ID: A1-40243-53

Lifting capacity is 16,000KG - 1200MM Viewing by appointment Auction-ID: A1-40243-3

Viewing by appointment Auction-ID: A1-40243-140

Longwall board 3750mm long, camera system Complete with charger! Viewing by appointment Auction-ID: A1-40243-6

Viewing by appointment Auction-ID: A1-40243-40

Viewing by appointment Auction-ID: A1-40243-113

Cummins diesel engine Auction-ID: A1-40243-10

Closed cab with heating Viewing by appointment Auction-ID: A1-40243-7

Viewing by appointment! Auction-ID: A1-40243-106

Closed cab. Viewing by appointment! Auction-ID: A1-40243-116

Brand: SIDES / Renault Model: VMA 105/S 2000 B 6X6 Version: Crash Tender Year of construction (yyyy): 1997 First registration (dd/mm/yyyy): / Fuel: Diesel Odometer reading (km's): 41679 Chassis number: VF9VMA6X6CS035087 Number of keys: 1 Vehicle category: N3: max. mass >12t. Superstructure: Crash Tender Number of seats: 3 Number of axles: 3 Maximum Permissible Mass (kg): 26000 Transmission: Automatic transmission Cubic capacity cc: 16400 Engine power kW: 412 Exterior colour: Yellow Panoramic roof: Yes Additional information: Engine: diesel engine Renault/MACK V8 EE9 560, Suspension: steel/leaves Pump flow rates: roof monitor: 4000l/min @ 14 bar - 40 meters range Bumper monitor (Akron): 1100l/min @ 14 bar - 50 meter range Capacity: 9000 liters of water + 260 kg of powder Pump reading hours: 141 hours No vehicle ...

Unused, Viewing by appointment Auction-ID: A1-40243-43

Viewing by appointment Auction-ID: A1-40243-112

Viewing by appointment! Auction-ID: A1-40243-154

Battery from 2016 Viewing by appointment! Auction-ID: A1-40243-107

Viewing by appointment Auction-ID: A1-40243-38

Viewing by appointment Auction-ID: A1-40243-41

Specifications: Lifting capacity: 2500 kg Mast: Plywood (3-piece) Lifting height: 555 cm Free lift (freelift) Sideshift Hydraulic fork positioner LPG version 2-pedal operation Cab with roof plate and windshield Lighting and flashing light Viewing by appointment! Auction-ID: A1-40243-20

Viewing by appointment Auction-ID: A1-40243-47

Viewing by appointment! Auction-ID: A1-40243-42

Round post cylindrical milled right angle cut 1 side crowned ø10 x 300 cm. The wood is smoothly planed. One side is shortened at right angles, the other side is crowned. Auction-ID: A1-45026-2285

Round post cylindrical milled right angle cut 1 side crowned ø10 x 300 cm. The wood is smoothly planed. One side is shortened at right angles, the other side is crowned. Auction-ID: A1-45026-2287

Round post cylindrical milled right angle cut 1 side crowned ø10 x 300 cm. The wood is smoothly planed. One side is shortened at right angles, the other side is crowned. Auction-ID: A1-45026-2286

Equipped with 2 separately opening side doors and end door; lock case; unused Auction-ID: A1-40105-264

Dimensions: 1200 x 450 x 1115 mm, sliding doors, without contents and accessories Auction-ID: A1-45973-98

20 pieces from this position 20 stair treads / boards edged on 4 sides, corners rounded, coarsely sanded / spruce / 1.20m long / wide board 24cm / thickness board 40mm / dry air-dried Auction-ID: A1-45889-2700

1,2m3 superior quality Red Alder Redalder American Planed Goods / boards edged on 4 sides / 2.50m long / max width board 30cm / thickness board 38mm / dry air-dried Auction-ID: A1-45889-2000

Packaging stanchions, e.g. for Gilnhammer plates carpeted inside Auction-ID: A1-45889-2875

Packaging stanchions, e.g. for Gilnhammer plates carpeted inside Auction-ID: A1-45889-2894

Side table HAY DLM XL white Slight signs of wear Auction-ID: A1-45889-2805