double side maschine used for sale

Weinig Hydromat 23C four-sided planer Working width 230mm Working height 160mm Number of spindles 7 Spindle layout: 1.Down 15kw 2.7.5kw rights 3.Left 7.5kw 4.Top 15kw 5.Lower 30kw (multi-saw) 6.Lower 7.5kw (hydro support) 7.Upper 7.5kw (hydro support) Spindle speed 6000r.p.m Spindle Diameter 50mm 4 pulling rollers in the working table Inverter-adjustable feed speed up to 36m/min Cardan shaft driven feed Pneumatic Clamps Technical documentation

Weinig Profimat 22N four-sided planer Working width 220mm Working height 120mm Number of spindles 6 Spindle layout: Lower 4kw Rights Left 5.5kw Upper 5.5kw Lower 4kw Universal 4 Feed speed adjustable by variator 6-22m/min 3kw feed motor power Adjustable spindles

Turning- in machine for casemaking Schmedt Präkant HHS6F double action turning-in for cases up to 60x60 cm manual foot operated, so the timing of turning-in is decided by the operator

Weinig Hydromat 23 four-sided planer 60m/min Working width 230mm Working height 160mm Number of spindles 5 Spindle layout: 1.Lower 15kw 2.11kw rights 3.Left 11kw 4.Upper 15kw 5.Lower 7.5kw Spindle speed 6000r.p.m Spindle Diameter 50mm 3 pulling rollers in the working table Inverter-adjustable feed speed up to 60m/min Cardan shaft driven feed Pneumatic Clamps Technical documentation Machine dimensions 300x180x170cmH Weight 3500kg Net price 130.000PLN

Key data: 5 , 450 mm, 120 mm

TECHNICAL DATA: Working width: 450 mm Working height: 120 mm Milling spindle: Ø 40 mm Planing spindle: Ø 50 mm Lower planing spindle with counter bearing Number of spindles: 5 Installed capacity: 56 kW SPINDLE CONFIGURATION: 1: bottom (11 kW) 2-3: right-left (11 kW) 4: upper (11 kW) 5: bottom (11 kW)

Key data: 4 , 180 mm, 120 mm

Used machine Workpiece width 180mm Workpiece height 120mm 4 spindles: 1) Horizontal bottom 180mm 3.7kW 2) Vertical right 120mm 4kW 3) Vertical left 120mm 4kW 4) Horizontal top 180mm 5.5kW Diameter of spindles 30mm

Two-side evaporator Guntner -Type: S-GBK 050.2B/47-EW.E -Cooling capacity: 40 kW at DT 10K (0°C), 35 kW at DT 9K (-2°C) -Fin spinning: 7 mm -Fans: 4 x 500 mm -Dimensions: 5500 x 1100 x 660 mm -Stainless steel housing and block -Electric defrost -Year of production: 2018 -Volume: 37.4 L -Quantity in stock: 1 -Reference number: CH 574 -Condition: Used in good condition, evaporator 100% tight, fans working, ready to work

Manufacturer: MEURER Type: CMK/M Angle welding machine + shrink tunnel Last used as a bundle packer for processed cheese (round cartons) El. Power: 8 kW Voltage: 380 V Condition: good, fully functional

Horizontal intermittent motion bagger for forming, filling and sealing duplex sachets. Mini maxi sachets: Width: 45 to 65 mm Height: 50 to 130 mm Capacity: 1.5 to 15 cm3 Volpak screw feeder: Type: DS-303 Year: 1997 Dosage volume: 1.5 to 15 cm3 Formats sold with the machine: 8 screws size 0 + 9 dosage cones 2 screws size 00 + 3 dosage cones 2 screws size 2 + 2 dosage cones 3 models of filling wand., formats: Width: from 45 to 65 mm / Height: from 50 to 130 mm / Capacity: from 1.5 to 15 cm3 , Cadence: 45 to 110 strokes per minute , Elec:: 380 V / 50 Hz / 9 A , Mini Maxi: Width: from 45 to 65 mm / Height: from 50 to 130 mm / Capacity: from 1.5 to 15 cm3 , Type: DS-303

Equipment: Agitator,Manufacturer: RAUM Tankbau,Condition: used,Volume: 47,200,Shelves: clapper bottom,Design: upright,Stand shape: feet,Number of feet: 6,Diameter outside: 3,200,Cylindrical height: 5,000,Total height: 6,620,Wall thickness underbody: 4,Wall thickness upper floor: 4,Manhole / dome: in cylinder (approx. 340 x 440 mm),Type plate: Yes,Equipment: Ventilation/ventilation, crane eyelets,Outlet: available,Outlet: 65,last purpose: foodstuffs,material in contact with the product: V2A 1.4301 (AISI304),Power: 3.5 / 12.5,Speed: 725 / 1465,Agitator: Propeller,Voltage: 400,Bottom Bearing: No,Current Interferer:

Equipment: Agitator,Manufacturer: Gebr. Hagemann Beckum,Condition: used,Volume: 30,000,Max. permissible Operating temperature : 100,Lower shelf: clapper bottom,Design: upright,Stand shape: feet,Number of feet: 4,Diameter inside: 2.488,Cylindrical height: 5.350,Total height: 7.100,Wall thickness underbody: 5,Wall thickness cylinder: 6,Wall thickness upper floor: 5,Technical documents: Drawing,Manhole / dome: in cylinder, hand hole,Type plate: Yes,Equipment: crane eyelets,Outlet: flange DN65,Note: slight adhesions,Last purpose: Chemical,Material in contact with the product: V2A 1.4301 (AISI304), Agitator:

Key data: 4 , 180 mm, 130 mm

Four-way planer Guilliet Type KXY Year of manufacture 1989 Planing width maximum 180 mm Planing height maximum 130 mm 4 planing shafts Knife length 186 mm and 136 mm Minimum planing 30 mm x 6 mm Dressing table length 2000 mm Feed speeds 6 and 12 m/min. Spindle diameter 30 mm Feed motor 0.55 kW Lower dressing shaft approx. 3.7 kW Right wave approx. 3.7 kW Left wave approx. 3.7 kW Above approx. 5.5 kW Height adjustment 0.18 kW Extraction connection diameter 160, 120 and 140 mm Including planer heads Dimensions 3200 mm x 1400 mm x height 1700 mm Weight 1200 kg The first picture shows identical machine in our warehouse

Key data: 4 , 230 mm, 120 mm

Four-sided planer SCM Type COMPACT 23K Year of manufacture 1997 CE Working width 230 mm Working height 120 mm 4 planing shafts equipped with planing heads Spindle diameter 40 mm Feed rates 6/12 m/min. Spindle speed 6000 rpm. Clamping length vertical spindles 140 mm Clamping length horizontal spindles 253 mm Entrance table length 2000 mm Spindle arrangement Down / Right / Left / Up Planer heads with glazing bead separation Including Tersa planer cutter heads Motor strengths approx. Bottom 5.5 kW / Right and left together 7.5 kW / Bottom 5.5 kW Dimensions approx. 3300 mm x 1600 mm x H 1600 mm Weight approx. 1200 kg

Equipment: Insulation, agitator,Condition: used,Volume: 60,000,Lower floor: flat bottom with slope,Design: upright,Standing shape: flat bottom,Insulation: available,Insulating sheath: hermetically welded,Material insulating jacket: stainless steel,Diameter inside: 3,500,Cylindrical height: 6,500,Total height: 7,200,Manhole / dome: in cylinder,Nameplate: No,Equipment: Ventilation/ventilation, crane eyelets,Outlet: available,Outlet : 80,Remarks: Container feet are spacers for the Substructure/foundation,last purpose: foodstuffs,material in contact with the product: V2A 1.4301 (AISI304),agitator:

Equipment: Insulation,Manufacturer: Alfa Laval,Condition: used,Volume: 50,000,Lower bottom: conical bottom,Design: standing,Stand shape: feet height-adjustable,Number of feet: 6,Insulation: available,Insulating jacket: hermetically welded,Material insulating jacket: stainless steel,Diameter inside: 3,350,Cylindrical height: 5,500,Total height: 7,700,Manhole / dome: in cylinder,Type plate: No,Equipment: Ventilation/ventilation, crane eyelets,Outlet: present,Last use: food, Material in contact with the product: V2A 1.4301 (AISI304),Bottom bearing: No,Current interferer: No,Floor bearing: No,Current interferer: No

Equipment: Agitator,Condition: used,Volume: 39,000,Design: upright,Standing shape: Feet height adjustable,Number of feet: 6,Diameter outside: 3,200,Cylindrical height: 4,750,Total height: 5,800,Manhole / dome: in the top floor,Type plate: No,Equipment: Ventilation/venting, crane eyelets,Outlet: available,Outlet : 50,Remarks: 1 container without ventilation hood,Last purpose: Foodstuffs,Material in contact with the product: V2A 1.4301 (AISI304),Manufacturer agitator: Stelzer,Power: 5, Speed: 980,Agitator: Propeller,Voltage: 380,Bottom Bearing: No,Current Jammer: No,Agitator Arrangement: Laterally

SCM moulder model LOGIC 23 with 6 shafts: - useful working dimensions 230x120mm - cardan drive and pneumatic pressure - Forward speed 4 - 32 m/min with variable speed drive - upper feed unit before the 1st shaft - tandem feed unit in front of the 2nd shaft - 2500mm inlet floor - grooved plane from the 1st to the 5th shaft - Deck lubrication pump - shafts D=40mm at 6000rpm - maximum diameter of profile tools 200mm - complete with helical knife heads Trees: 1- below 2- right 3- Left 4- above 5- below 6- Universal Machine not compliant with CE regulations, for export

Key data: 5 , 310 mm, 250 mm

Four-sided timber planer REX HOMS-310-K with 5 shafts Year of Make: 1978 Working width: 310 mm Working height: 40-310 mm Working height 4-sided: 210 mm (can be increased to 250mm) Number of Spindles: 5 Spindle arrangement: u-o-r-l-u Spindle diameter: 50-50-40-40-40 mm Spindle speed: 5400 rpm Counter bearings: 1-2-5 Motor powers: 7.5-11-5.5-7.5-7.5 kW Working width adjustment: manual Working height adjustment: motorized Feed speed: 5-60 m/min Feed motor: 5.5 kW Feed: Chain Driven rollers in the table: 2 Top feed rollers: 5 Pull-out transport rollers: 4 Horizontal tool head: 2 PCS - D180xH300xd50 Tool head vertical: 2 PCS - D160xH210xd40 Table height constant: approx. 950 mm Chip removal at the bottom: 10 mm Chip removal at the top: 16 mm Right chip removal: 20 Chip removal left: 20 Diameter of the suction nozzles: 200-200-140-140-120 mm Weight: 5500 kg Space  ...

Key data: 3

Volume flow 300 (50 Hz) / 360 (60 Hz). m³/h Pressure difference approx. +240 to +260 mbar (50 Hz). Engine power 3.0 kW (50 Hz) / 3.6 kW (60 Hz). Speed approx. 2850 (50 Hz) / 3370 (60 Hz). Current consumption (50 Hz) 15.9 A () / 9.20 A (Y). Degree of protection IP55 (standard, see type protection). Voltage 200 - 480 V Weight 53 kg

Wooden sliding door sideboard approx. 150b cm, small contents

Workshop side cabinet HAHN+KOLB approx. 60x80x70 cm, 1 door, 1 drawer

Desks and side tables light grey approx. 10 pcs., of which 3 pcs. each approx. 180x90 cm

Wooden sliding door sideboard, approx. 210x92x50 cm, small contents

Workshop side cabinet metal green approx. 80x85x5t cm, without contents

Four-sided planer copper mill Model: VUIN 605 Planing width 605 mm Planing height 200 mm between upper and lower planing shaft Planer heads rear left and right All planing shafts as 4-knife shaft Automatically adjustable table height with dressing table adjustable up to 12 mm Dressing table with table extension Feed rate 7-9-11,5 / 14-18-23 m/min. 3 fluted feed rollers 3 smooth table rollers 1 smooth pull-out roller

Side Pastry Filler / Berlin Filler with 1 Piston NEW! Pastry filler / doughnut filler with 1 plunger for filling doughnuts or pastries2 liter bowl with table attachmentDetails see picture

Four-sided planer Casadei C4 Working width 220mm Working height 120mm Number of spindles 4 Spindle layout: 1.Lower 4kw 2.4kw rights 3.Left 4kw 4.Upper 4kw Spindle speed 6000r.p.m Feed speed adjustable by variator 4-21m/min Tool size 125-140mm Cardan shaft driven feed Technical documentation

Side table white approx. 80x70 cm, 2 grey conference chairs

Sideboard light grey approx. 160x85 cm, with similar sideboard approx. 160x85 cm, drawer container, white

Used for pulling and shaping the sides of the shoe. Auction-ID: A7-45167-37

Side channel blower, side channel blower, ring blower, vacuum pump, blower -Manufacturer: Siemens, side channel blower side channel blower -Type: Elmo-G 2BH1 603-1AC11-Z -Drive: 2.2 kW -Speed: 2860 rpm -Connection input: Ø 38 mm -Connection output: Ø 50 mm -Dimensions: 380/380/H380 mm -Weight: 28 kg

Side channel compressor, side channel blower, ring blower, vacuum pump, blower -Manufacturer: Rietschle, side channel vacuum pump side channel compressor -Type: SKG 245-2 -Drive: 1.1 kW -Speed: 2850 rpm -Flow rate: max. 170 m³/h -Compression pressure: 130 mbar -Number: 1x compressor available -Price: per piece -Dimensions: 450/310/H370 mm -Weight: 27 kg

drawer runner, telescopic runner, drawer pull-out, drawer runners, drawer pull-out, Telescopic rails, pull-out rails, heavy-duty pull-out, side rails, front pull-out, drawer side rails -Manufacturer: Grass, Nova side rail set -Type: 7607/350/2S-RER-SET/9006/1 -Item no.: 45859-01 -Length 350 mm -Quantity: 7x set available -Price: per set / minimum order 2 sets -Transport dimensions: 350/100/H40 mm -Weight: 0.3 kg/set

Drawer slide, telescopic slide, drawer extension, drawer rails, drawer extension Telescopic slides, extension slides, heavy-duty extension slides, side rails, front extension slides, drawer side rails -Manufacturer: Grass, Nova Side Rail Set Original Packaging -Type: 7607/300/2S-RER-SET/9006/1 -Item No.: 45858-01 -Length 300 mm -Quantity: 7 sets available Price: per set / Minimum order 2 sets -Transport dimensions: 300/100/H40 mm -Weight: 0.3 kg/set

drawer runner, telescopic runner, drawer pull-out, drawer runners, drawer pull-out, Telescopic rails, pull-out rails, heavy-duty pull-out, side rails, front pull-out, drawer side rails, 2-side rectangular rails -Manufacturer: Grass, NP 2-side rectangular railing set -Type: 7607/400/2S-RER-SET/9006/1 -Item no.: F102045860 -Length 400 mm -Quantity: 1x set available -Transport dimensions: 400/100/H40 mm -Weight: 0.4 kg/set

drawer runner, telescopic runner, drawer pull-out, drawer runners, drawer pull-out, Telescopic rails, pull-out rails, heavy-duty pull-out, side rails, front pull-out, drawer side rails -Manufacturer: Grass, Nova side railing set in original packaging -Type: 7607/450/2S-RER-SET/9006/1 -Item no.: 45861-01 -Length 450 mm -Quantity: 4x set available -Price: per set / minimum order 2 sets -Transport dimensions: 450/100/H40 mm -Weight: 0.4kg/set

Side channel compressor, side channel blower, ring blower, vacuum pump, blower -Manufacturer: Stralfors, side channel blower with control box and filter -Type: 739641 704793-04 -Serial No: 04-BLOW-16 -Drive: Emerson Electric 250W -Speed: 2850 rpm -Individual components: see photos -Dimensions: 460/370/H310mm -Weight: 20kg

Side channel compressor, side channel blower, ring blower, vacuum pump, blower -Manufacturer: Rietschle, side channel vacuum pump side channel compressor -Type: SKG 340-2V.02 -Drive: 4 kW -Speed: 2850 rpm -Flow rate: max. /h -Compression pressure: mbar -Number: 2x compressors available -Price per piece -Dimensions: 650/480/H555mm -Weight: 76 kg/pc.

Side channel compressor, side channel blower, ring blower, vacuum pump, blower -Manufacturer: Becker, side channel vacuum pump side channel compressor -Type: SKG 340-2V.02 -Drive: Dietz 3.0 kW 2870 rpm -Speed: 2850 rpm -Flow rate: 250 m³/h -Compression pressure: 240 mbar -Dimensions: Ø 480 x 560 mm -Weight: 67 kg/piece

Side channel compressor, side channel blower, ring blower, vacuum pump, blower, dry suction -Manufacturer: Dürr-Dental, side channel vacuum pump side channel compressor for dry suction -Type: 9000.102.09 -Drive: 220 V / 370 W -Connection input: Ø 32 mm -Connection output: Ø 32 mm -Dimensions: 310/260/H270 mm -Weight: 14.8 kg

Side channel compressor, side channel blower, ring blower, vacuum pump, blower -Manufacturer: Siemens, side channel blower side channel compressor with reversing valve -Type: Elmo-G 2BH6 000-0AC12 -Drive: 2.2 kW -Speed: 2860 rpm -Reversing valve: Wachenhausen GHDM7 -Dimensions total: 430/370/H380 mm -Weight: 38 kg

Side channel compressor, side channel blower, ring blower, vacuum pump, blower -Manufacturer: FPZ effepizeta, side channel blower side channel compressor -Type: SCL 70 SH -Drive shaft: Ø 35 x 90 mm -Bolt circle: Ø 160 x 10 mm -Drive motor: can be supplied at an additional cost -Dimensions total: 545/520/H565 mm -Weight: 37 kg

Cantilever racking, heavy-duty racking, single-sided cantilever racking, pallet racking -Manufacturer: Bito, cantilever rack one-sided base bay type KR29 L height 1980 mm -Stands: 4 pieces 1980/605/55 mm grid 60 mm adjustable -Cantilever arm length: usable depth 500 mm / 29 pieces -Load capacity per cantilever arm, max. 175 kg, see photo type plate -Cross braces: 6 pieces 1060/140/60 mm -Transport dimensions: 2100/760/H150 mm -Total weight: 180 kg

Side channel compressor, side channel blower, ring blower, vacuum pump, blower -Manufacturer: Elektror, side channel blower side channel compressor -Type: SD-4N/S892 -Drive: 1.2 kW -Speed: 2800 rpm -Flow rate: 2.8 m³/min / 168 m³/h -Compression pressure: 180 mbar -Dimensions total: 450/360/H370 mm -Weight: 24.7 kg

Cold circular saw, metal circular saw, miter saw, circular saw, sawing system, metal saw -Manufacturer: MEP, cold circular saw metal circular saw type TRL 300 pivoting on both sides -Engine: Type C 112 M -Power: 2.2 / 3.0 kW -Speed: 720 / 1450 rpm -Saw blade: Ø 315 mm -Cutting area at 90 degrees flat: 110 x 70 mm -Cutting range at 45 degrees: 100 mm -Accessories: incl.2 saw blades, see photos -Dimensions: 1230/630/H1800 mm -Weight: 273 kg

Side channel compressor, side channel blower, ring blower, vacuum pump, blower -Manufacturer: DEGA, side channel blower/side channel compressor with filter -Type: 2XHB510H26 -Drive: 1.6 kW -Speed: 2850 rpm -Flow rate: m³/h -Compaction pressure: 200 mbar -Overall dimensions: 570/800/H830 mm -Weight: 57 kg

Manufacturer: Weinig , Type: Unimat 3000 Brilliant, Year: 2002, Control: Weinig LogoCom, Planing widht mm: 20-230, Planing hight mm: 10-160, Number of spindles: 9, Elektronische Achsverstellung: yes, Wellendrehzahl: 4000-12000 regelbar, Fast exchange device: HSK 63, Setting up program shafts: yes, Saw unit kW: no, Table rollers: yes, Tool exchange places: no, Elektronische Anzeige : yes, Rotations of spindles max. rpm: 12000, Spindle arrangement: unten/rechts/links/rechts/oben/unten/oben/unten, Separate engine per spindle: yes, Fully suspended drive feeding: yes, Feeding - kW: 7,5, Feeding speed min-max m/min: 10-36, Feeding speed continous adjustable: yes, Table length: kurz, Pneumatical top pressure: yes, Adjustment - electonically: yes, Jointer Stück: yes, 1.Bottom spindle kW: 7,5 KW/12000 U/min, 2nd spindle on right kW: 7,5/12000 U/min, 3.Left spindle kW: 11/<CRLF>4000-12000mi ...

Manufacturer: Brandt, Type: Optimat KD 77 C, Year: 1998, Program: Brandt, Work piece width min-max mm: 65, Min.-max. workpiece length in mm: 160, Min.-max. workpiece height in mm: 10, Edgeband height max mm: 60, Thickness of coiled edgeband max mm: 3, Vorschub min- max m/min: 11 , Premilling: no, Premilling: no, Mitre stations: yes, Glue system granulate/cartridge: Granulat, Mitre stations: yes, Radiusfräsen : yes, Schnellwechselmotore: yes, Flush/radius/chamfer milling: yes, Contour milling type: yes, Radius scraper: yes, Buffing unit: yes, Top pressure belt/roller: Rolle, Work piece refeeding: yes, Compressed air bar: 6, Noise enclosure: yes, Year :1998

Manufacturer: Brandt KDF mit Fügefräsen, Type: Profiline KDF 670, Year: 2005, Barcode: 0,5-3, Min-max edge material mm: 120-3500, Work piece width min-max mm: 10-55, Min.-max. workpiece length in mm: 10-60, Edgeband height max mm: 20, Luftkissentische Einlauf: Umstellung von 2mm auf Fase automatisch, mit Vakuum: yes, mit Klemmung: yes, Machining cracks: yes, Fine milling: yes, Application of separation agent: yes, PU-EVA: yes, Laser technology: yes, kW Leistung Laser: yes, Min.-max. batten magazine mm: yes, Mitre stations: yes, Bevel milling: yes, with tool holders: yes, Nut Motore: yes, Type of scraper: yes, Number of tools per tool-magazine: yes, Number of sanding units: yes, Buffing unit: yes, Top pressure belt/roller: yes, Workpiece support: yes, Workpiece return: Rolle, Return type: yes, System dismantled: ca. 6700, FREE TEXT: ZHR 01, : ink Rückführung/ Verfügbarkeit ca. ab Jul ...

Manufacturer: IMA, Type: Novimat K/I/G80/1005/SR3 L12, Year: 2000, Program: IMA, Control: IMATRONIC 100, Work piece width min-max mm: 140 - 600, Min.-max. workpiece height in mm: 16 - 32, Min-max feed m/min: 5 - 25, Infeed table: yes, Einlauflineal gesteuert: yes, Premilling: yes, Application of separation agent: yes, Coil magazine: 12 fach, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, radius milling: yes, Radius scraper: yes, Corner trace buffing: yes, Corner trace buffing: yes, Barcode: yes, Freiplätze: 1, Machine lenght mm: 12300, Noise enclosure: yes, Rückführung Typ: yes, Year :2000