double side maschine used for sale

pressure:100 t distance between columns:1000 mm stroke:500 mm Return Capacity:10 t Engine Output:10 kW :700 mm Ram plate:1000 x 700 mm table height over floor:1000 mm Table size:1000 x 700 mm speed of forward flow:10 mm/sec Pressing speed:10 mm/sec Return Speed:25 mm/sec :10 mm/sec Oil cooling (electric):1,5 kW (max) Oil Tank Capacity:300 l weight of the machine ca.:6 t dimensions:3100 x 1000 x 2900 m

pressure:275 t distance between columns:3000 mm total power requirement:30 kW weight of the machine ca.:40 t draw back pressure:27 t pump capacity:Axialpumpe mit Proportionalventil :6000 mm :max. 3000 mm Table dimensions:6000 x 3000 mm table height over floor:700 mm distance between table / ram:1100 mm :450 l traversing speed:auf X und Y, 30-33 mm/sec. down speed:2-10 mm/sec :2-50 mm/sec. Cylinder hub:900 mm Cylinder diameter:440 mm Stestle extension:200 / 200 mm / Ø :40 mm Siemens Control System:S7 1200 Monitor Siemens 9":Touch Panel Tax desk:tragbar

pressure:300 t distance between columns:1900 mm stroke:600 mm total power requirement:30 kW weight of the machine ca.:27 t dimensions of the machine ca.:2900 x 3500 x 5400 mm Return Capacity:40 t Main Cylinder:Ø 370 x 350 mm :2 Stk. Ø 80 x 50 mm speed of forward flow:150 mm/sec Return Speed:150 mm/sec Table size:1800 x 1800 x 150 mm Ram plate:1800 x 1800 mm demand for oil:ca. 700 l :max. 900 sec Daylight Opening:900 mm pressure speed:15-8 mm/sec auxiliary motor:5,5 + 2,2 kw auxiliary pump:22 + 5,5 cc Lineal mess stab NOVOTECHNIK:650 mm Table height above ground level (approx.):1000 mm Light sensors front and rear of SICK:900 + 150 mm Monitor:12 Zoll Hydraulic and mechanical protection of the plunger Two-piece auxiliary motors with 2.2 kw Two-piece auxiliary pumps with a power of 6 L/min. Concurrency monitoring (0.5 mm/m²) Fast forward speed adjustable via plc Maximum deflection of the ...

GS14 - used approx. 100 m³ / 100,000 litres double-walled steel tank, heating oil tank, firefighting water tank, water cistern. In good condition, aboveground tank on two mounted steel consoles, storage tank, water tank, former oil tank, steel tank painted in green. capacity: approx. 100 m³ / 100,000 litres material: steel tank, double-walled, DIN6616/2 dimensions: Ø 2.9 m x approx. 15.8 m long weight: approx. 17.0 t manufacturer: Kraemer Apparatebau other: 2 entry shafts Upon request the tank can be repainted for additional charge. The container is used, has been emptied and professionally cleaned inside. According to the age there are traces of use. This steel tank / container can be used as a storage tank for many different media. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask u ...

pressure:400 t distance between columns:2300 mm stroke:600 mm total power requirement:37 kW weight of the machine ca.:25 t dimensions of the machine ca.:3300 x 2800 x 5200 mm Main Cylinder:Ø 440 mm :2 Stk. Ø 100 x 60 mm speed of forward flow:200 mm/sec Return Speed:200 mm/sec Table size:2200 x 1400 x 150 mm Ram plate:2200 x 1400 mm demand for oil:ca. 900 l :max. 600 sec Daylight Opening:900 mm pressure speed:15-8 mm/sec auxiliary motor:5,5 + 2,2 kw auxiliary pump:22 + 5,5 cc Lineal mess stab NOVOTECHNIK:650 mm Table height above ground level (approx.):1000 mm Light sensors front and rear of SICK:900 + 150 mm Monitor:12 Zoll Hydraulic and mechanical protection of the plunger Two-piece auxiliary motors with 2.2 kw Two-piece auxiliary pumps with a power of 6 L/min. Concurrency monitoring (0.5 mm/m²) Fast forward speed adjustable via plc Maximum deflection of the table at 0, 07mm/m²

Double Z Kneaders / Sigmakneter -Make unknown, built CA. 1960 -Refurbished in 2018 -Electric motor VEM 4 / 6 KW pole shift bar, 2 speed 1445 / 720 rpm, 11/12 A -Belt drive - 2 Z Wave -All wetted parts in stainless steel -Single-walled tank approx. 700 760 500 mm approx. 250 litres - volume = approx. 150 litres -Floor outlet with spindle and Handwheel -Weight approx. 1200 kg -Overall dimensions approx. 1400 1500 1700 mm -Very stable and very good condition

pressure:200 t distance between columns:1200x1000 mm stroke:600 mm total power requirement:32,5 kW weight of the machine ca.:20,5 t draw back pressure:20 t :1 Stück voltage:400 V frequency:50 Hz :24 V :Rexroth/Bosch dayligth:800 mm working area:1200x1000 mm :1200x1000 mm work height max.:1100 mm :170 mm/sek. :150 mm/sek. :15 mm/sek. quantity of oil:500 l :220 V memory:200 Programme :20-200 über Monitor t :5-170 mm/sec. :0-10 sec :2-10 mm/sec :750x950 mm :300 mm :5-50 t :2-80 mm/sec :1000 kg

S5 - used 50m³ / 50,000 litres steel tank, double-walled, underground tank, firefighting water tank, water cistern. In good condition, underground or aboveground tank, steel storage tank, water reservoir. Surface coated with bitumen insulation / bitumen painting. capacity: approx. 50m³ / 50,000 litres material: steel tank / underground tank, double-walled manufacturer: Mannesmann dimensions: approx. Ø 2.5m x 10.0m long weight: approx. 8.0 - 10.0 tons The steel tank is used, has been emptied and professionally cleaned inside. According to the age there are traces of use. This container can serve as a storage tank for water, waste water, sewage, manure, seeping juice, rapeseed oil, or as rainwater collection tank, water cistern, firefighting water tank etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your dem ...

pressure:100 t distance between columns:3000 x 1500 mm stroke:500 mm total power requirement:30 kW weight of the machine ca.:16 t dimensions of the machine ca.:4000 x 2500 x 4500 m Master cylinder:1 Stück main cylinder:135 x 90 Ø mm Auxiliary cylinder:2 Stück Auxiliary cylinder:90 x 50 Ø mm Table size:3000 x 1500 (mit T-Nuten) mm Ram plate:3000 x 1500 (mit T-Nuten & Federschweisungen) mm work height max.:900 mm pre-running speed:125 mm/sec return speed:100 mm/sec Speed printing phase:40 - 8 mm/sek. Hydraulic block:REXROTH demand for oil:500 l pressure control:über PLC Controll:Zweihandbedienung Daylight Opening:600 mm fied interior wide:3100 mm auxiliary motor:5,5 + 2,2 kw auxiliary pump:22 + 5,5 cc pre-run valve:2 Stk pressure stop valve:max. 200 min Lineal mess stab NOVOTECHNIK:550 mm Table parallelity:0,05 mm / m² Guide rails for parallelism :verschraubt Light sensors front an ...

pressure:500 t distance between columns:1500 x 800 mm stroke:800 mm total power requirement:45 kW weight of the machine ca.:25 t dimensions of the machine ca.:2200 x 2200 x 4800 m Master cylinder:1 Stück main cylinder:500 Ø mm Auxiliary cylinder:2 Stück Auxiliary cylinder:120 x 80 Ø mm Table size:1500 x 1400 (mit T-Nuten) mm work height max.:950 mm pre-running speed:190 mm/sec return speed:200 mm/sec Speed printing phase:20 - 8 mm/sek. Hydraulic block:REXROTH Oil Tank Capacity:1500 l demand for oil:1300 l pressure control:über PLC Daylight Opening:1200 mm fied interior wide:1500 x 800 mm auxiliary motor:5,5 + 2,2 kw auxiliary pump:22 + 5,5 cc pre-run valve:NG pressure stop valve:max. 600 sec Lineal mess stab NOVOTECHNIK:850 mm Table parallelity:0,05 mm / m² column diameter:200 Ø / mm automatic fat lubrication:über Bildschirm einstellbar Guide rails for parallelism :4 fach Light  ...

Double shaft grinder of August jade Maschinenfabrik Frauenfeld Built in 1940 Weight approx. 1100 kg L x W x H: 150 x 80 x 110 cm The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

S6 - used approx. 1.5 m³ / 1,500 litres steel tank on wooden skids, double-walled, in good condition. Storage container, water tank, firefighting water tank, diesel fuel tank, heating oil tank. capacity: approx. 1.5 m³ / 1,500 litres material: steel, double-walled diameter: approx. Ø 1.0 m length: approx. 2.1 m overall height: approx. 1.2 m incl. skids The steel tank is used, has been emptied and professionally cleaned inside. According to the age traces of use are present. This container can be used as a storage tank for many different media. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please ...

Double circular saw cross cut Rüco L x W x H: 6 x 3 x 1.2 m Weight approx. 1.5 to Built in 1969 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Doppelschleifbock, water cooled-Schleifscheibe max Ã? 350 x 50 mm (neuwerig) speed 1400 RPM engine power 1.8 KW 380 Volt L 1050 B 750 H 1250 mm - 79. weight 300 kg

manufacturer : Beetz Type : UMK 1000 double Z Kneader electrical : D-Motor 380 V, 17,5 kW, 50 Hz Space required : 2350 x 1900 x 2100 mm high Bottom outlet : 310 x 285 mm, outlet height : 700mm YOM : 1975 contents : 1000 l different: - double trough-shaped steel container width 1030 x depth 1100 x high 900 mm - Overall height 1800mm to cover - double walled for steam heating - with hinged cover and grid protection - with 4 double Z kneading arms / mixing arms working in opposite directions We offer this machine in 'as is' condition, without warranty EXW Netherland, without dismantling

HELMA- model CF-40-copy milling/shaping machine feed thru with work piece return (2) milling spindles- 18" max. distance between the spindles centers- 28" x45" Table - (2) 30mm. work spindles- 10,500 RPM spindles- 4"max. cutting height - vertical adjustment 10 mm.- (2) 7 1/2 hp. spindle motors - 1/2hp. variable speed feed motor 5' to 30' per min.- 2,200 lbs. $7,500

BALLISTRINE- C 70 N- auto feed thru (2) sided shaper(2) 10HP; 3PH spindle motors • (2) 30mm diameter spindles with 5in. under the nut • Spring loaded floating spindles • In-feed and out-feed rubber covered upper feed rollers • Working width 14.4in. (360mm) max • Working height 4.8in. (120mm) max • Min working length 9.6in. (240mm) • Spindle 8,000 RPM • feed 3 to28..Price-$8,900

Loop scope Length x width 1200 x 600 mm Distance table spindle Center max. 700 mm Wheel Max (D x W x d) 400 x 80 x 127 mm Grinding head and drive Y-axis (vertical movement) Vertical grinding head 550 mm Distance from spindle Center table 150... 700 mm Machine table and drive x axis (longitudinal movement) Magnetic clamping plate size 1200 x 600 mm Table longitudinal travel, max. 1300 mm Table burden, including magnetic clamping plate, Max 800 kg Stand and drive Z-axis (transversal movement) Stand transverse stroke, 560 mm Space requirements, power consumption, weight Space, with coolant system 4410 x 2600 mm (W x D), Machine height 2550 mm Weight of the machine (incl. control cabinet), CA. 5400 kg

PRESS FOR PRODUCTION ALUMINIUM TRAYS FOR ALIMENTARY USE COMPLETE WITH DOUBLE IMPRESSION MOULD-1100 CC. COMPOSED OF: A LUBRICATION UNIT 4-COLUMN MOLDING UNIT TOW-SCRAP CONTROL PANEL. 55 STROKES/MINUTE DEPENDING ON THE MOULDS. PASS COLUMNS FOR MOULDS UP TO 800 MM

Qty. 1 Second-hand double stand cold rolling mill stand Mfc.: SMS/Germany Type: 4-Hi Double Stand Cold Rolling Mill Built: 2009 Stopped: 2017 Capacity: 800,000 Ton/Year Annual running: 6480 h Strip width: 800 – 1650 mm Thickness entry: 1.8~5.0 mm Exit: 0.3 – 2.5 mm Coil OD: 1000~2200 mm Coil ID: 610 mm Coil Weight: Max. 30 T Line Speed: max. 1350 m/min Threading Speed: 30 m/min

Pressing force 160kN,pull cushion force 63kN,stoesselstroke 300 mm, pull-cushion stroke 150 mm, recessed height 500 mm, table 630x400,Stoessel 300x250,pull cushion flap 350x270,

S20 - used approx. 40 m³ / 40,000 litres steel tank, double-walled, coated inside, incl. 2 bases, dome shaft, railing and ladder. technical details: capacity: approx. 40 m³ / 40,000 litres material: steel tank double-walled DIN6616/2 weight: approx. 7 t dimensions: approx. Ø 2.50 m x 8.70 m long Includes 2 bases, a prefabricated dome shaft made of steel in accordance with DIN 6626 as well as a railing and ladder, as shown in the pictures. The dome shaft, the railing and the ladder had to be dismantled for transport and cut off at the top, but are included in the delivery. The customer has to refit and weld these attachments himself on site. Upon request and at additional cost we can also supply a propeller agitator. Used steel storage tank in very good condition, outside painted in silver, coating on the inside, former glycol tank, with 2 dome shafts and connection ...

DATA ON THE MACHINE Machine type: Grinding bracket / double grinding bracket Manufacturer: METABO Model: 7230 Condition: very good (used) Price 450 â?¬ FP net plus 19% VAT Location Warstein , Germany Reference M-MET-1119 Description We offer you a grinding buck from the manufacturer METABO. Grinding wheel diameter max. 300 Weight ink. Base approx. 250kg Storage as new. Our offer is aimed at persons who are covered within the meaning of the Trade Code in accordance with Section 14 GewO. The offer is subject to change, intermediate sale reserved. Please provide your full contact details in order to receive an offer with our Terms and Conditions of Payment. Mistakes in the descriptions and offers are reserved!

Distance sawing max 90° mm: 2800 Diameter saw blade mm: 300 Main motor kW: 3.3 Weight Kg: 500

Twin Screw Extruder Metalchem 2T9/4,5 for PCV, Made by Metalchem out-put 100 kg/h

Table diameter: 3100 mm Turning diameter: 3200 mm Turning height: 2000 mm Motor power: 0 HP/kW Positions ATC: 00   Positions APC: 0   MACH-id      5352 MAKE           BOST SA SPAIN TYPE             HYPRO 10 YOP              2000 SPECIFICATIONS Max. turning diameter Ø    3200 mm Table Ø       3100 mm Control         Conventionel Horizontal movement support        2000 mm Stroke ram left          1250 mm Stroke ram right        1250 mm Angle adjustment / ram swivable        30 ° Single column or double column        Double column Maximum turning height          & ...

Compounding extruder Material: PE, PP, PS, ABS + fillers / Details: dcising, segmented screws and cylinders, degassing, vacuum pump, screw speed max. 300 rpm, DC motor 252 kW, heating power 98 kW, incl. side-feeding Leistritz LSB 90 (screws 2x x 90 mm, drive: 3.0 kW, screw speed: max. 150 rpm), Macromate SPS visualization. (attached photos are BEISPIELBILDER)

Material: PVC / Details: DC motor 70 kW, degassing, counter-runner, vacuum pump, screw diameter 88-151 mm (conical) Throughput: approx. 300 - 400 KG/hr.

Table diameter: 2000 mm Turning diameter: 1800 mm Turning height: 1250 mm Motor power: 35 HP/kW Positions ATC: 0   Positions APC: 0   MACH-id   4306 MAKE       WMW TYPE         DKZ 2000 x 1250 B YEAR         1976 SPECIFICATIONS Max. turning diamter  Ø  2000 mm Table / chuck size Ø     1800 mm Workpiece height     1250 mm Work piece weight   6000 Kg Horizontal movement support / ram    1150 mm Stroke support left ram      700 mm Stroke support right ram    700 mm Angle adjustment / ram swivable     30 Spindle speeds / ranges      50 Rpm Power     35 Kw DIMENSIONS Length      4100 mm Width       5300 mm Heig ...

Material: PVC // Details: DC motor 27 kW, degassing, counter-runner, capacity approx. 150 - 200 KG/hr.

Material: PVC // Screw diameter 52-104 mm (conical), counter-rotor, motor: 15 kW, capacity: 20 - 140 KG/hr.

Material: PVC // Details: DC motor 10 kW, screw diameter 52 mm, L/D 16, degassing, capacity: approx. 10 - 70 KG/hr.

Table diameter: 7100 mm Turning diameter: 8000 mm Turning height: 3240 mm Motor power: 0 HP/kW Positions ATC: 0   Positions APC: 0   MAKE  STANKO 3KTC TYPE   1580 L YEAR    Overhauled 2006 SPECIFICATIONS Controll  Conventionel Max. turning diamter Ø   8000 mm Table / chuck size Ø   7100 mm Workpiece height    3240 mm Work piece weight   125000 Kg Horizontal movement support / ram    4400 mm Stroke support left ram    2000 mm Stroke support right ram    2000 mm Angle adjustment / ram swivable   - 15 / - 30 Gr Live tooling    Milling spindlel 650 Rpm Singel column or double column Double column   Spindle speeds / ranges    19.6 Rpm DIMENSIONS Length   9000 mm Width     14000 mm Height ...

Material: PVC // with degassing, counter-rotor, DC motor 29 kW, screw diameter 86 mm, L/D 16 Capacity: 150 - 250 KG/hr

P181 - used approx. 40 m³ / 40,000 litres PE-HD-tank, plastic tank, flat bottom tank, double-walled with an outer hull. specifications: capacity: approx. 40 m³ / 40,000 litres material: PE-HD tank, plastic tank manufacturer: Formoplast Kunststofftechnik GmbH measurements: Ø approx. 3,49 m outside / Ø approx. 3,00 inside x height tank approx. 5,70 m / total height approx. 6,50 m mark of conformity: PA-VI 321.103 specific weight: 1,13 kg/L media: former chemical tank for formalin DIBT and media list available, suitable for AHL and ASL PE-HD tank, professionally cleaned and in good condition. Double-walled, i.e. with an outer hull, non-translucid, various connections such as ventilation, inlet, suction pipe, etc., lid on top of the roof. According to the media list suitable for many different chemicals e.g. iron chloride, hydrochloric acid, acetic acid, caustic soda, sul ...

Multifunctional cooking unit Frima VarioCookingCenter VCC 112, built in 2009, in a very good used and functional condition. Suitable for cooking, frying and frying. Two crucibles of 14 liters each (individually adjustable), temperature range 30-250° C, ceramic field, core temperature sensor. Digital control via touchscreen. Water inlet and drain, hand shower. With cabinets. Dimensions B/T/H 125/80/112 cm. Connection values 400 volts, 17 kW. Workshop-tested, ready for immediate use. Further on request.

Dopel membrane pump 1 inch with suspended solid pre-separator Pneumatically operated, mounted on transport trolleys on a mobile-by-mobile vehicle. Technical data: Gear ratio: 1:1 Maximum capacity: approx. 197.6 l/min Discharge quantity per cycle: approx. 0.88 l Air connection: 1/2" Nominal suction side: 1" Nominal diameter print page: 1" Maximum operating pressure: 8.3 bar Max solid diameter: 3.3mm Weight: approx.10 kg Lukra pumps, basement pumps Special price

Many thanks for your interest on our Frisse double Z kneader, please find follow our offer: Manufacturer : Richard Frisse Herford Type : ZK 25 Kneader Year of manufacturing : 1986 Electrical : 380 VAC complete volume : 250 l usable Volume : 200 l Dimensions : ca. 2030x1000x1300 (l/w/h in mm) Weight : ca. 2000 kg Different : Condition OK trough tiltable We offer this machine in as is – where it is” condition, without warranty ex Warehouse Hess. Lichtenau (EXW), unpacked

Double grinding buck Manufacturer Greif Type D20-1-1 Kw 0.55 New grinding wheels Neulack Very good and quiet run Grinding machine Abrasive Grinding Buck Double Grinding Machine Double Grinding Wheel Machine Special price

Max cutting length: 4000 mm Cutting height: 200 mm Cutting width: 130 mm Power: 5,1 kW Weight: 650 kg

Twin Shaft shredder mod. ITS850x550E- 22 kW. Heavy duty construction. Shredding chamber dimensions 8500x550 mm with n°2 counter-rotating hexagonal shafts fitted with n°28 blades with a thickness of 30 mm, 1 hook double spaced to 60mm. Including n°1 main gearbox with straight spur gears for fast and slow shaft. Driven by n°1 x 22 kW motor The shredder is supplied complete with supporting stand, feeding hopper. The electric control panel of this shredder will be fitted with a Siemens PLC to control the working logic of the shredder including the automatic shafts reversal system in overloading conditions, a display will show the working parameters and operating conditions. The total weight of the shredder is around 3.000 Kg.

TECHNICAL DATA: Working width max mm: 3200 Working width min mm: 200 Passage height max mm: 180 Feedrate max m/min: 4 - 24

Rexroth double pump for Battenfeld injection moulding machine R900737658 SYDFE1-20/100R R900737659 SYDFE1-20/071R

Double miter saw Manufacturer: Düspohl Model: DGK 400 B Built: 2000 Cutting width: 100mm Cutting height: 100mm Saw aggregates Swivel: -45° - + 45°

Rexroth double pump for Battenfeld injection moulding machine SY2DFE1-2X/100-100 MNR: R901016480

Material: PE, PP, PS, ABS / Details: three-phase motor, DC, segmented screws and cylinders, degassing, vacuum pump, screw speed: max. 600 rpm, control: Resotec PLC

CNC double miter saw make ANTON type ADS-ENMachine -No: 39091, built in 1991For efficient sawing of aluminum and PVC profilesSaw blade diameter: 450 x 30 mmFeed infinitely variableAir consumption: 7 atm 200 l / minBlade speed: 2800 rpm.Cutting length: 260 - 5000 mmCutting area square: 265 x 100 mmCutting area round: 150 mmDrive power: 2 x 2.25 kWExternal dimensions: 6150 x 1200 x 1750 mmWeight: 1460 kgWith:- Control De Man 408- automatic pivoting from 45 ° to 90 °used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Double miter saw make ELU type DG 102Machine -No: 23122 built in 1981for efficient sawing of aluminum profilesSaw blade diameter: 420 mmCutting area straight for profiles approx: 100 x 240 mmxa0xa0xa0 at 45 ° approx.: 100 x 180 mmSection length up to: 4500 mmSaw blade speed: 2800 rpm.Saw blade motor: 2800 rpm, 3 kW eachelec. Connection: 380 V, 6 kWDimensions: 1200 x 6000 x 1350 mmWeight approx: 1000 kgWith- compl. elec. and pneumatic. Facility- pneumatic. tensioning device- 2.5 m roller conveyor on movable saw carriage- saw bladesused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Double pipe heat exchanger pipe heat transfer for biogas plant, sewage treatment plant sludge hygienization - used - Manufacturer AEL GmbH Leisnig Type Double pipe heat transfer W202 Fabr. No. 7.0637.940/29-56 Built in 1997 Permissible betieb pressure 6 bar Permissible operating temperature 90°C Content 1090 l Kerb weight 6510 kg Length approx. 11 m Width approx. 3 m Depth approx. 1.5 m

Dough kneading machine W&P DK 250 with 2 boilers -Double cone kneader type DK 250 -for max. 400 kg dough or 250 kg flour -with base plate