double screw extruder used for sale

Pneumatic screwdriver, pneumatic screwdriver DESOUTTERDrück air screwdriver, rod screwdriver for screwdriving technology type SD 140-AR510-S4QDreh torque range: 0.6-14.0 NmSpeed: max. 510 rpm. Compressed air requirement: 6 barAir consumption: 8.7 l/sBit input: M6- rotary switch for clockwise and counterclockwise rotation (rotary ring control)- without screwdriver shutdown- compressed air control cable 4 mm- compressed air connection for screwdriver function min. 10 mm- Aluminum bracket for handling device- Screw feeder 12 mm (inner diameter)Dimensions L x W x H

Screw block for screw compressor, compressor, compressed air unit, stationary compressed air compressor, screw block, compressor, compressor stage -Manufacturer: Boge, screw block compressor stage from compressor type SL 270 -Screw block: type BS 430 -Final pressure: max. 15.0 bar -Hole circle: Ø 295 mm / M20 / Ø 740x22 mm -Shaft: Ø 100 x 200 mm -Dimensions: 1200/850/H790 mm -Weight: 917 kg

Screws, hex bolts, flange nuts, hexagon nuts, collar nuts, solar fasteners, cylinder screws -Hex bolts/cylinder bolts: M10 stainless steel 330 kg -Hexagonal screws: DIN 933 M10 x 100 300 pcs / M10 x 20 4400 pcs -Cylinder head screws: DIN 912 M8 x 35 6600 pcs / M8 x 30 4200 pcs -Material: Stainless steel A2 -Price/Sale: complete -Transport dimensions: 1200/800/H200 mm -Total weight: 330 kg

Screws, hexagon screws, flange nuts, hexagon nuts, collar nuts, solar fasteners, cylinder screws -Hexagonal screws/cylinder head screws:M16 / M20 730 kg -Hexagon screws: DIN 931 8.8 M20 x 60 250 pieces / M20 x 55 DIN 933 8.8 4400 pieces. -Hexagon screws: DIN 931 8.8 M16 x 50/22 150 ST -U-washers: Ø 21.0 mm DIN 125 Form B 2100 pcs. -Price: complete -Transport dimensions: 1200/800/H440 mm -Total weight: 730 kg

Washing and dewatering screw, conveyor screw, transport screw, screw conveyor, conveying technology, pipe conveyor screw, trough conveyor screw, trough conveyor screw -Conveyor screw: Washing and dewatering screw -Version: Stainless steel -Drive motors for augers: 2 units, 3 kW, 60 rpm -Conveyor screws: Ø 510 mm -Auger pitch: 4100 mm -Inlet/Outlet: mm -Number: 2 washing and dewatering screws available -Price: per piece -Dimensions: 2090/5460/H2180 mm -Weight: 2180 kg

A used replacement stage type VML 60 is offered, see pictures. The compressor stage is in very good condition, see pictures. If you have any questions, please feel free to contact us.

Screw block for screw compressor, compressor, compressed air unit, stationary compressed air compressor, screw block, compressor, compressor stage -Manufacturer: Atlas Copco, screw block compressor stage from compressor type GA 408 Pack -Screw block: Type GA 408 -Final pressure: max. 8 bar -Shaft: Ø 40 x 55 mm -Dimensions: 760/490/H500 mm -Weight: 160 kg

Used woodworking frame press with 5 frames and 5 clamping screws. Used for gluing and pressing wooden parts during the manufacture of frames and cases, ensuring stable and even bonding of the corners while the glue dries. Ideal for joinery workshops and for the production of window frames and doors. Brand, exact model and further technical specifications (dimensions, weight) are not confirmed for this specific unit - please contact us for details. Auction-ID: A7-50988-34

Stainless steel screw drip – 150 mm / 2,670 mm screw drip used stainless steel screw drip, designed to facilitate devatting and evacuation of the pomace / harvest after fermentation. Compact and easy to integrate into a reception or work area in the cellar, it allows for regular mechanical transfer. Technical characteristics Type: duner / screw extractor Construction: stainless steel screw Function: extraction and conveying of the pomace / harvest to an outlet (press, skip, pump, conveyor, etc.) Receiving tank: optimised inner section to guide the material towards the auger Dimensions Length of the screw: 2,670 mm Inner width of the bin: 195 mm Depth of the bin: 225 mm Total footprint Total length: 3,300 mm Total width: 330 mm Total height: 470 mm Location: Monteux (84) Equipment sold loaded on truck: dismantling and loading offered by the seller. Auction-ID: A1-51122-363

Spare parts for paper production/spiral conveyors, in stock on wooden frame, 1x approx. 4500 mm length and diameter approx. 400 mm, 1x approx. 4000 mm and diameter approx. 400 mm Auction-ID: A1-51285-363

Outer diameter of 219.06 mm and a wall thickness of 8.18 mm Approx. 746 cm long Spare parts for paper production/spiral conveyors, on wooden frame. Auction-ID: A1-51285-414

Lot of 5 boxes of 500 screws – 4 × 40 mm – 2,500 screws Lot consisting of 5 boxes each containing 500 screws of 4 × 40 mm, i.e. 2,500 screws in total. Important information – to be read before bidding Goods from discontinued series and surplus, sold as is. The information in this description (quantities, capacities, dates, composition) is provided by the seller. The photos, quantities, dimensions and weights are not contractual. The appearance of the packaging and products may vary from one item to another. A visit is strongly recommended before bidding. The buyer bids with full knowledge of the facts and remains solely responsible for his or her assessment of the lot. Auction-ID: A1-51086-77

Brand new machine designed for screwing reinforcements in PVC profiles. - simultaneous operation of both screwing units - separately adjustable distance between screwdrivers 250-540 mm - automatic screw feeding - automatic disconnection of the feeder movement - screw depth sensor - foot switch control Additional equipment: - machine base - pick-up rollers - pneumatic impulse to the feeder (13mm), preventing jamming of the screws in the feeder at the entrance and exit - feed force pressure reducer - additional manual slot for various screws - extended travel +30 mm to 130 mm - laser positioning pointer - screw depth sensor - horizontal pressure

Material: PVC / Details: DC motor 70 kW, degassing, counter-runner, vacuum pump, screw diameter 88-151 mm (conical) Throughput: approx. 300 - 400 KG/hr.

Compounding extruder Material: PE, PP, PS, ABS + fillers / Details: dcising, segmented screws and cylinders, degassing, vacuum pump, screw speed max. 300 rpm, DC motor 252 kW, heating power 98 kW, incl. side-feeding Leistritz LSB 90 (screws 2x x 90 mm, drive: 3.0 kW, screw speed: max. 150 rpm), Macromate SPS visualization. (attached photos are BEISPIELBILDER)

Material: PVC // Details: DC motor 27 kW, degassing, counter-runner, capacity approx. 150 - 200 KG/hr.

Material: PVC // Screw diameter 52-104 mm (conical), counter-rotor, motor: 15 kW, capacity: 20 - 140 KG/hr.

Material: PVC // Details: DC motor 10 kW, screw diameter 52 mm, L/D 16, degassing, capacity: approx. 10 - 70 KG/hr.

Material: PVC // with degassing, counter-rotor, DC motor 29 kW, screw diameter 86 mm, L/D 16 Capacity: 150 - 250 KG/hr

Material: PE, PP, PS, ABS / Details: three-phase motor, DC, segmented screws and cylinders, degassing, vacuum pump, screw speed: max. 600 rpm, control: Resotec PLC

We can offer 2 twin screw extrusion compoundibg lines,manufactured in 2015 diameter 75mm, L/d 40. water circle pellitzer.drive motor power 160kw.short time working, very good condition.Serious buyers contact us. We have many brands and models machines, tell me what you need seriously!

Material: PE, PP, PS, ABS // Details: DC motor, segmented screws and cylinders, screw speed max. 300 rpm, degassing, vacuum pump, mass pressure and mass temperature sensors, strand head, control cabinet for heating and motor control. Screw Ø: 2x 67 mm L/D: 34:1 Motor: 97.5 kW (DC)

Material: PE, PP, PS, ABS // Details: DC motor, segmented screws and cylinders, screw speed max. 300 rpm, degassing, vacuum pump, mass pressure and mass temperature sensors, strand head, control cabinet for heating and motor control. Siemens Simatic OP17 controller Screw Ø: 2x 75 mm L/D: 36:1 Motor: 143 kW (DC)

pdf attached

Stock No. 2590k 1 used compounding pelletizing line, throughput up to 1200 kg/h depending on material, consisting of: 1x Grav. Dosing system 5-component SITECOM incl. control 1x Extruder twin screw THEYSOHN type TSK 90 Screws 2x Ø 90 mm – 36 LD synchronization Segment screw and barrel, water / medium cooled Screw speed up to 300 rpm-1 Extruder drive 255 kW-DC 1x side dosing extruder TSD 75 twin screw with drive 3 kW 3x degassing openings 1x melt filter No. 1 type K –HS- Y with sieve 176 mm, incl hydraulic 1x melt pump with drive 22 kW 1x meelt filter No.2 type K-SWE 180 RS back-flush self-cleaning incl. hydraulic 1x strand head with 32 x Ø3.5 mm holes 1x strand cooling pool 620 x 5000 mm 1x string granulator SG 300, drive 11 kW Screen control ResoTec / control cabinet Visit / demonstration at short notice by arrangement. Further compounding lines and access ...

Stock No. 2680 1x partially overhauled and functionally tested Compounding extruder double screw, co-rotating intermeshing Segmented screws and cylinder barrel (water cooled) Screws 2x 64 mm - 40 L/D Screw speed up to 1200 rpm-1 Drive 482 kW-DC Gearbox Flender safety coupling atutomatik 3x degassing venting ports ( vacuum pump optional for extra charge ) 2x side feeding dosing extruder type ZSFE 50 twin screws with dm 48.5 mm with 4 kW each, speed up to 800 rpm.-1 Control cabinet with Siemens HMI Touch OPTIONAL at extra cost: 1) Screen-pack-changer changer 2) Vacuum pump 3) Pelletizing: ST strand, - WRG waterring or - UWP underwater pelletizing system 4) Granulate classifying sieve 5) gravimetric loss-in-weight blender / dosing system 6) Material conveying 7) Big-bag filling station 8) Start-up by our technicians Visit to our factory in Wuppertal.  ...

Compounding - granulation line, consisting of: Extruder twin screw synchronization, drive 31 kW Segment screws and barrels, water-cooled Screws 2x Ø 35 mm – 44 L/D 1x degassing zone (atmospheric) 1x degassing zone (vacuum) 1x side dosage Screen changer double piston type K-SWE 101 with hydraulics Switchboard Water bath, granulator, etc. optionally also available on request.

Key data: 40 mm, 40 , 600 U/min

Material: PE, PP, PS, ABS, Year of construction: 2000 Capacity: approx. 100 – 300 kg/h Screw diameter: 2 x Ø 40.0 mm L/D: 40:1 Propulsion: 110 kW (DC) more details: synchronous, degassing with vacuum pump, screws and cylinders segmented, Strand nozzle, water bath, strand granulator. NEW control cabinet for heating and motor control (Siemens S7, touch screen) Optional: Side loading

Key data: 17 mm, 40 , 1200 U/min

Kategorie / Category: Twin-screw extruder / Twin-screw extruder Nummer / Number: DE27684 Manufacturer / Manufacturer: Leistritz Typ / Type: ZSE 18 HPe Baujahr / Year: 2009 Capacity: approx. 40 - 60 kg/h Motor: 9.4 kW AC max. screw speed: 1,200 rpm Screw diameter: 2 x Ø 18.8 mm L/D: 40:1 Material: PE, PP, PS, ABS + fillers // more details: synchronous, atmospheric degassing, segmented screws and barrels // Control: MacromateXX Siemens with visualization //

DC motor Stromag 70 kW, gearbox 2 x 960 Nm, with Coperion ZSB 70 side feed. The worm shafts and the end head are missing. Therefore, sales as spare parts carriers.

Extruder line Werner & Pfleiderer type ZSK with : Feeding system with forced agitated hopper Ø53x33D twin screw Manual filter changer, model CFM75 Rod granulation head 10 wires + 6 wires Immersion tank, model TI400/4 4 M Periplast dryer Granulator Sieving

Brand Cincinnati Milacron Austria GmbH Type CMT 35 Machine number 2005723/10 Type Screw Conical Double Screw Year of manufacturing 1993 Ble Ud Dvyovl Hzgocop Machine hours 104.599 hours Screw Diameter 35 mm Dimensions (LxWxH) 3200 x 1500 x 1720 mm Weight (approx) 2000 kG

Deze extruder van Cincinnati staat bij Plastima Used Machinery in de machineopslag. De machine komt uit 1999. Bj Usq Tr T Rod Dvycjlp – Merk: Cincinnati – Model: Titan 45R-APC – Bouwjaar: 1998 – Conische dubbele schroef extruder – Schroef Ø: 45 mm – Werkuren: 64.082

Merk: Leistritz AG Model: Micro 27/40 D Type schroef: Dubbele schroef Bouwjaar: 1993 Schroef Ø: 27 mm L/D-verhouding: 40 Werkuren: 2.466 Bws Ud Dvyju Aqdkocjw

• One pair of original WEBER screws (excellent state, including measurement report • One pair of non-original screws Be Udowaxuae Dvycsww • Gearbox inspected and partially revised by WEBER • Control upgraded to WPS-control • Output on PVC around 700 kg/hour

Key data: 72 mm

We can offer a W&P extruder. 75/36, year 2004, stopped, working condition.

Key data: 58 mm

We can offer a Toshiba extruder. 58/40, year 2010, stopped, working condition.

We can offer Krauss maffei extruder,moder ZE90A, manufactured in 2013, main motor power 884kw, large output, installed and used, auxiliary equipments available, serious buyer contact us.

We can offer Krauss maffei extruder,moder ZE90A, manufactured in 2013, main motor power 884kw, large output, installed and used, auxiliary equipments available, serious buyer contact us.

Key data: 130 mm

Stock# UG6397 Used line for WPC (wood plastic composite) acoustic panels production. Line had been working on acustic panels with width 600 mm x length up to 6 m. Maximal possible width up to 900 mm. Line consist of: - Twin screw, co-rotating extruder by Weber (D) model DS 13.27. Machine has twin screws, each with diameter 130 mm. Working length LD = 27. Extruder is driven by el. motor 145 kW. Barrel has 12 heating zones, each with el. heaters 5.5 kW. Includes Transi-Tec mixing and dosing device and unused spare barrel. - Calibrating table by Techno-Plast with 4 pcs of vacuum pumps (each power 4 kW) and one blower with power 1.1 kW. - Pull-off with a saw by Techno-Plast, driven with motor 5.7 kW - Profile collection table - Vacuum pump (Busch) - ONI water cooling exchanger Line new in 2010.

Key data: 108 mm

Theysohn TTS 108-26/CON 40 with coexrurder 40 mm // 2011 year prod. // Control Panel TEC-2TS

Key data: 63 mm, 1750 1/min

double extruder Theysohn CON 63 with Coextruder CON 40 PCV // 2008 year prod. // Main Drive Power - 37 kW // Control Panel Colour TEC-2TS

Key data: 170 mm

Twin-screw extruder Make : COPERION ( Werner & Pfleiderer ) Gearbox make : P.I.V Type : ZSK 170 W 1920/1750 Year of construction : 2021 / 2002 / 1986 Screw diameter : 172 mm Screw speed : 4,9 - 49 min-1 Max. torque : 17,500 Nm Main engine : 216 kW Since 2021 a total of over €420,000 has been invested in new components and factory overhauls (some of which were previously unused) The extruder was in use until Aug / 2023 and has already been dismantled ready for transport. The components are partly redundant and date from the years 1986 - 2021. The scope of delivery consists of : Twin screw degassing Coperion DSE 180 - Year of manufacture 2021 ( 180 t€ ) Main gearbox P.I.V - 1 x year of manufacture 2002, factory overhauled ( 233 t€ ) in 2021, unused - 1 x year of manufacture 1986, factory overhauled in 2016, used 2021 - 2023 Main engines Siemens, ...

Key data: 27 mm, 36 , 1200 U/min

Warehouse – No. 2875 1 used, in 2026 Partially overhauled and function-tested compounding granulation line, consisting of: Brabender grav. Dosage 2-components (expandable, optional vs. surcharge) with 1x FlexWall 40, 1x DDW-MD5, Congrav RC4 control stand-alone Extruder Twin Screw Leistritz Type ZSE 27 HP Synchronous, seal-combing, segmental screw and barrel with intensive cooling. Screws 2x Ø 27 mm- 36 L/D with 8 cylinder zones with 3x degassing zones, 1x vacuum pump 1.5 kW Screw speed up to 1,200 rpm.-1 – adjustable Extruder drive 33.8 kW - Heating capacity 9.8 kW installed Mass pressure sensor Control Macromatex III MAAG Gala Underwater Pelletizer Type LPU Model SLC 5, incl. Polymer start-up valve with hydraulics Perforated plate 20°, granulator SLC 5 with drive 1.5 kW Water Box - Temperate water system with Granule Centrifugal Dryer Type 1150, Driv ...

Key data: 40 mm, 28

Werner & Pfleiderer ZSK 40 twin-screw extruder – very good condition For sale is a Werner & Pfleiderer (WP) ZSK 40 co-rotating twin screw extruder. Technical data: - Screw diameter: 40 mm - Screw length: 7 housing x 4 D, approx. 28 L/D - Main drive: 34.5 kW - Engine speed: 1,800 rpm - Screw speed: 40-400 1/min - Max. torque per worm shaft: 325 Nm - Electric heating: approx. 17 kW - Cooling: Water cooling unit - Temperature control zones: 6 - Housing temperature measuring points: 6 - Material temperature measuring point: 1 - Material pressure measuring point: 1 Housing configuration: - Inlet housing with liquid addition opening - Open housing with insert and two liquid addition ports - Several closed housings with holes for liquid addition or measuring points - Degassing housing Co-rotating, densely interlocking and self-cleaning screws. High mixing and di ...

Key data: 83 mm

Twin screw extruder Werner & Pfleiderer / Coperion ZSK 83 For sale is a ZSK 83 twin screw extruder (co-rotating) from Werner & Pfleiderer / Coperion. The machine is in very good condition and has been regularly serviced. Technical details: - Model: ZSK 83 - Screw system: co-rotating twin screws - Engine power: 46 kW - Cylinder: water-cooled - Degassing zone: present - Dosage: included (as in the pictures) - Replacement screw elements: available - Control / control cabinet: good condition, fully functional The plant is ideal for compounding, masterbatch, recycling, polymer and filler applications. The extruder has been overhauled if necessary and has been technically tested. On-site inspection and test run possible by arrangement. Transport worldwide possible. Further photos, data sheets and videos are available.

Key data: 30 mm

Twin Screw Extruder / Laboratory Extruder - 2 x 30 mm screw diameter - 4 heating zones - Dosage - Control Used machine, fully functional.

Year of manufacture 1993 Complete wardrobe DC Motor Plating system in bad condition Complete heating system 7 heating area screw diameter 80 mm, size 275 l. x 145 w. x 80 h. cm

We offer all types of screw manufacturing machines M3 - M25 -A href=inchabc://abc.steinfels-kg.de/sale/screws/inch>all information about the machine please click here

We can offer you all types of screw making machinery for M3 - M25