double screw extruder used for sale

Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, travel motor, drive motor -Manufacturer: Bosch, double hydraulic pump -Type: 0 510 900 039 1517 222 379 -Shaft: conical Ø 14-17 mm -Flange: Ø 80 mm -Number: 4x pumps available -Price: per piece -Dimensions: 225/90/H120 mm -Weight: 5.6 kg/piece

hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, travel motor, drive motor -Manufacturer: TK, double hydraulic pump -Type: 22TK6/6S / 22 I 0004 -Shaft: conical Ø 15-17 mm -Flange: Ø 36 mm -Number: 3x pumps available -Price: per piece -Dimensions: 215/88/H110 mm -Weight: 5.8 kg/piece

hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, tandem pump -Manufacturer: GSL, double hydraulic pump -Type: 1402 772653 3349121070 -Shaft: conical Ø 14-17 mm -Flange: Ø 80 mm -Number: 4x pumps available -Price: per piece -Dimensions: 180/90/H120 mm -Weight: 4.2 kg/piece

Hydraulic pump, oil pump, hydraulic power unit, hydraulic pump, hydraulic pump, drive motor, traction motor -Manufacturer: Bosch, Double hydraulic pump -Type: 0 510 315 305 0 510 365 305 -Shaft: conical Ø 14-17 mm -Flange: Ø 80 mm Quantity: 1 piece available -Dimensions: 205/90/H120 mm -Weight: 5.0 kg

Hose reel, hose unwinder, tank hose reel, wall-mounted reel, oil conveyor, hose reel, automatic hose reel, oil hose reel, grease hose reel, grease hose reel, compressed air hose reel -Hose reel: Double hose reel oil-compressed air -Oil hose reel: length 6.65 m with flow meter -Compressed air: hose length 10.57 m -Dimensions: 800/500/H550 mm -Weight: 76 kg

Frequency converter, frequency inverter, drive converter, controller, variable speed drive, single motor module, double motor module -Manufacturer: Siemens, Sinamics Double Motor Module -Type: 6SL3120-2TE21-8AA0 A5E33512929 FS: D -Input: DC 510-720 V 43 A -Output: 3 AC 0-480V 18A/18A 0-550Hz A -Number: 3x module available -Price: per piece -Dimensions: 480/50/H270 mm -Weight: 7.9 kg/piece

Frequency converter, frequency inverter, drive converter, controller, variable speed drive, single motor module, double motor module -Manufacturer: Siemens, Sinamics Double Motor Module -Type: 6SL3120-2TE13-0AD0 -Input: DC 510-720 V 7.2A -Output: 3AC 0-480V 3A/3A 0-550Hz A -Number: 8x module available -Price: per piece -Dimensions: 420/50/H270 mm -Weight: 4.6 kg/piece

Frequency converter, frequency inverter, drive converter, controller, variable speed drive, single motor module, double motor module -Manufacturer: Siemens, Sinamics Double Motor Module -Type: 6SL3120-2TE21-0AD0 -Input: DC 510-720 V 22 A -Output: 3 AC 0-480V 9A/9A 0-550Hz A -Number: 10x module available -Price: per piece -Dimensions: 420/50/H270 mm -Weight: 4.8 kg/piece

Double bench grinder, double grinding machine, pedestal grinder, bench grinder, belt grinder, belt sander, edge grinder, edge grinding machine -Belt sander: Manufacturer Grit, sanding belt 75 x 2000 mm -Motor: Teknodan 3 kW 2850 rpm -Grinding bench: Manufacturer Flott, double grinding bench type 702 1 /2/200 x 32 x 51 -Grinding discs: Ø 200 mm -Motor: AEG 0.6 kW 2800 rpm -Submission/Price: complete -Overall dimensions: 1000/900/H1685 mm -Total weight: 228 kg

Filter testing, filter test system, filter measurement system, filter test system, dosing pump double generator -Manufacturer: Science Purge, Double Generator Dosing Pump with Accessories -Type: SC 1801 -Individual components: see photos -Submission/Price: complete -Dimensions: 430/300/H305 mm / 225/175/H165 mm / 410/340/H185 mm -Weight: 11.1 kg / 1.5 kg / 6 kg

Double girder traveling crane, bridge crane, overhead crane, assembly crane, workstation crane, ceiling-mounted traveling crane, traveling crane, crane system -with 2x electric cable winches -Load capacity: 2 x 1600 kg -Bridge load capacity: 3.2 tons -Wingspan: 6.4 m -Hallway service -Dimensions: 2000/6400/H1000 mm -Weight: approx. 2000 kg

Manufacturer: Torwegge, Type: 8010, Year: 1998, Maschinensteuerung: yes, Motore Maschine 1: 4 +4, Conveyor: 1 Kettenmaschine, Min.-max. workpiece length in mm: 2500, Min.-max. workpiece height in mm: 6-30, Working width min-max mm: 80, Machine with controlled dogs: yes, Cam distance mm: ca.500, Feeding speed min-max m/min: 10-40, Feed stepless: yes, Overall milling units: 4+4, Moulding units swivel-mounted: 4+4, gesteuerte Fräsaggregate: no, 1st milling unit kW / rpm: 4,5/5800, 2nd milling unit kW / rpm: 4,5/5800, 3rd milling unit kW / rpm: 4,5/5800, 4th milling unit kW / rpm: 4,5/5800, Year :1998

Manufacturer: Homag, Type: FL 20/06/30/S, Year: 1995, Maschinensteuerung: Homatic, Machine no 1: Quermaschine, Motore Maschine 1: 5, Magazine: yes, Conveyor: Kette, Work piece width min-max mm: ca.220, Min.-max. workpiece length in mm: 220-3000, Min.-max. workpiece height in mm: 10-40, Machine with controlled dogs: yes, Cam distance mm: ca.400, Feeding speed min-max m/min: 6-40, Feed stepless: yes, verängerte Kette mm: yes, Nockenaushebung: no, Magazine: yes, Overall milling units: 10, Moulding units swivel-mounted: 5+5, gesteuerte Fräsaggregate: no, 1st milling unit kW / rpm: 6,6/5800, 1. swivelling controllable: schwenkbar, 2nd milling unit kW / rpm: 6,6/5800, 2. swivelling controllable: schwenkbar, 3rd milling unit kW / rpm: 6,6/5800, 3. swivelling controllable: schwenkbar, 4th milling unit kW / rpm: 6,6/5800, 4. swivelling controllable: schwenkbar, 5th milling unit kW / rpm: Freipl ...

Manufacturer: Homag , Type: Power FR 20/09/15/L/Q1, Year: 2007, Control: Powercontrol Homag, Conveyor: Nockenkette, Work piece width min-max mm: 350, Min.-max. workpiece length in mm: 220-1500, Min.-max. workpiece height in mm: 10-30, Machine with controlled dogs: yes, Cam distance mm: ca.500, Feeding speed min-max m/min: ca.60, Feed stepless: yes, verängerte Kette mm: yes, Overall milling units: 5, Moulding units swivel-mounted: 5, gesteuerte Fräsaggregate: keine, 1st milling unit kW / rpm: 6,6/5850, 1. swivelling controllable: yes, 2nd milling unit kW / rpm: 6,6/5850, 2. swivelling controllable: yes, 3rd milling unit kW / rpm: 6,6/5850, 3. swivelling controllable: yes, 4th milling unit kW / rpm: 6,6/5850, 4. swivelling controllable: yes, 5th milling unit kW / rpm: 6,6/5850, 5. swivelling controllable: yes, Year :2007

Manufacturer: IMA, Type: Maschinenstrasse Combima, Control: IMA, Work piece width min-max mm: 1 Maschine 250-1500, Min.-max. workpiece length in mm: 2 Maschine 250-2600, Min.-max. workpiece height in mm: 10-50, Feeding: Ja, Machine no 1: yes, Angular transfer: yes, Machine 2: yes, Drilling machine no1: no, Destacking unit: yes, Edgeband thickness max mm: 3, Edgeband height max mm: 50, Nockenabstand mm: 850, Coil magazine: 6-fach, Feeding speed max m/min: 10-30, Premilling: yes, Strip magazin: no, Kantenmagazin: yes, Mitre stations: yes, Trimming saw: yes, Büdigfräsen: yes, radius milling: yes, Fasefräsen: yes, Contour milling type: MFA, Radius scraper: yes, Flat scraper: yes, Spraying device: yes, Maschine vorführbereit: yes, Year :2000

Manufacturer: Ima zweieinseitige Maschinen in Verkettung, Type: Combima I, Year: 1999 Überholt 2010, Control: IMA, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 10-60, Infeed table: Rollgang mit Drehstattion, Min-max edge thickness mm: 0,5-3,0, Min-max strip length mm: 300, Min-max protrusion of workpiece mm: 38, Min-max feed m/min: 8-40, Velängerte Kette mm: yes, Cam distance mm: ca.450, Premilling: yes, Profile milling: yes, Machining cracks: Zerspanen, Fine milling: yes, IR zone: yes, Coil magazine: 4-fach, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, Corner tracing type: MFA, 2 motors: yes, Servo copying: yes, Rolling chain: yes, Bonding part EVA: yes, Vertical grooves: yes, Grooves, slewable-controlled: yes, Radius scraper: yes, Flat scraper: yes, Servo copying: yes, Year :1999 Überholt 2010

Manufacturer: Homag, Type: FL 20/07/15/S, Year: 2003, Destacking plant: PC 21, Vereinzelung: Woodline, Software: yes, Maschinensteuerung: 220 - 1500, Machine no 1: 220, Motore Maschine 1: 8 - 90, Machine 2: yes, Motore Maschine 2: 500, Kantenversiegelung: 10- 40, Conveyor: yes, Trittschal: max 110, Einlegstattion in Kartons: 25 mm, Min.-max. workpiece height in mm: 11, Working width min-max mm: yes, Working hight min-max mm: 6,6, Machine with controlled dogs: yes, Cam distance mm: 6,6, Feeding speed min-max m/min: yes, Feed stepless: 11, Min-max protrusion of workpiece mm: yes, 3 Engine power kW: Mittelschnitflasch Arbeitsbreite 300 - 500 mm, Year :2003

Manufacturer: IMA, Type: FBA/II/R80/660 F, Year: 1992, Control: IMATRONIC, Work piece width min-max mm: 220-2000, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 8-45, Working widht max mm: 2600, Machine with controlled dogs: yes, Cam distance mm: 320, Extended chain conveyor: 850, Scoring saw controlled: yes, kW / U/min: 1,5/6000, 1st milling unit kW / rpm: 4,4/6000, 2nd milling unit kW / rpm: 3,3/6000, 2. swivelling controllable: yes, 3rd milling unit kW / rpm: 3,3/6000, 3. swivelling controllable: yes, 7.Profilschleifaggregat Stk.: 4 pro Seite, 8.Flächenschleifaggregate Stk: 2, 9. Bürstenaggregat: 2, Aggregats per side - total: 9, Sawing unit: 1, Hersteller Prägestationen: 3, Folienprägestationen: 2, Prägehöhe mm: 5-30, Year :1992

Pressure total: 800 ton Ram stroke: 700 mm Slide adjustment: 600 mm Shut height (stroke down, adjustment up): 1500 mm Free frontal opening L-R: 3800 mm Free lateral opening F-B: 1450 x 1100 mm Table surface area : 3500 x 1900 mm Slide area: 3500 x 1900 mm Die cushion capacity in table: 150 ton Die cushion stroke: 250 mm Die cushion pad area: 2780 x 1570 mm Number of strokes: 7 - 18 s.p.m. Required power: 120 kW Height over floor approx.: 9510 mm Weight of machine approx.: 260 ton

Max. cutting length: 4,500 mm Max. saw blade diameter: 550 mm Automatic length positioning and angle adjustment via program control Motorized adjustment for swivelling on both sawing units, allowing angles between 45 and 90 degrees to be directly controlled New network-compatible control system in 2019 Minimum quantity spraying device Weight: approx. 2200 kg

Range : ø 10-40 mm plain pipe; or 40-110 mm corrugated pipe, 20 m/min max. Remark : ID 450-600mm; OD 1200mm Max Width 100-400mm

TECHNICAL DATA: Sanding belt length: 2800 mm Installed power: 2 hp

Key data: 380 mm

Max. cutting length: 4,500 mm Max. saw blade diameter: 380 mm Manual length adjustment with digital display E111 Cutting area at 90°: 195 x 120 mm Cutting area at 45°: 135 x 120 mm Minimum quantity spraying device Pneumatic material tensioners Mitre cuts possible on both sides 2-hand operation Machine is dismantled on squared timber

1 pc. universal whetstone (20mm wide) 1 pc. whetstone for HSS steel (40mm wide) Grinding wheel diameter 150 mm Grinding wheel width 20 + 40 mm Mounting diameter 12.7 mm Connection voltage 230 V Motor power 0.25 KW Weight 16 kg Dimensions L x W x H 0.37 x 0.2 x 0.24 m Condition: never used / new (5) Auction-ID: A1-45681-784

Double bench grinder: Grinding grit: 36 and 80 Grinding wheel diameter max. 150 mm Grinding wheel width 25 mm Mounting diameter 32 mm Connection voltage 230 V Motor power 0.5 KW Condition: never used / new (5) Auction-ID: A1-45681-789

Double bench grinder: Grinding grit: 36 and 80 Grinding wheel diameter max. 200 mm Grinding wheel width 32 mm Mounting diameter 30 mm Connection voltage 230 V Motor power 0.9 KW Condition: never used / new (5) Auction-ID: A1-45681-708

CONTROLS   conventional WORKING RANGE (DOUBLE DISC GRINDER)   Grinding wheel diameter: 750 mm   grinding width max. - throughfeed grinding: 150 mm   material thickness max. - throughfeed grindin: 70 mm GRINDING SPINDLE 1   spindle revolutions (max): 610 /min GRINDING SPINDLE 2   spindle revolutions (max): 610 /min COMPONENT-FEEDER   Feeder Design: rotary Feeder DIMENSIONS / WEIGHTS   space requirements -left/right-: 5230 mm   space requirements -front/back-: 4460 mm   total height: 3600 mm   total weight approx.: 11000 kg Machine is dismantled and stored

CONTROLS   CNC controls SIEMENS 810 T WORKING RANGE (DOUBLE DISC GRINDER)   Grinding wheel diameter: 750 mm   grinding width max. - throughfeed grinding: 180 mm   material thickness max. - throughfeed grindin: 30 mm   grinding width max. - plunge cut grinding: 180 mm   material thickness - plunge cut grinding: 30 mm COMPONENT-FEEDER   Feeder Design: rotary Feeder ELECTRICAL SPECIFICATIONS   total power consumption: 95 kW Scope of delivery: - Machine - div. flanges and used grinding wheels - Measuring control IONIC 17A Optional: - 270 pcs. grinding segments 22A 100 S 6 B20 - 289 pieces grinding segments 14C 80 L 10 B30 Machine is dismantled and stored

A Frenco workshop gear testing device is available. Bed length: 590mm, min. center distance: 45mm, max. center distance with fine adjustment/without fine adjustment/without intermediate plate: 105mm/155mm/320mm, repeatability: 1.5µm, intermediate plate length: 210mm, max. worm diameter: 78mm, center distance (worm lengths): 0mm-220mm, measuring table dimensions X/Y/Z: 800mm/700mm/940mm. Machine dimensions X/Y/Z: approx. 1200mm/800mm/1750mm, weight: approx. 330kg. Documentation available. An on-site inspection is possible.

Double mitre saw HAFFNER DGS 188 built in 2011, blade ø approx. 400 mm, machine length approx. 600 cm, 400 V, max. 6 bar, S/N 11003

Double work and assembly table wood self-made, 1 table approx. 400x100t cm, 1 table approx. 300x100t cm, small contents consumables

Double glass frame steel orange, approx. 150x200h cm, without contents

Office double workstation light grey, 2 angle desks each approx. 250x160 cm, 2 filing cabinets each approx. 80x205h cm, hanging file cabinet, sideboard, 1 swivel chair

Load capacity: maximum. 500 kg Including: assembled plastic plate: 115 x 130 (L/W) Auction-ID: A1-45762-23

Grinding wheel diameter max. 300 mm Speed 1390 rpm Connection voltage 400 V Motor power 2.2 KW Condition: unchecked Auction-ID: A7-45761-739

Load capacity: maximum. 500 kg Auction-ID: A1-45762-90

Load capacity: maximum. 500 kg Auction-ID: A1-45762-74

OMGA TR2A double miter saw: – useful opening 2800mm – adjustable blades D=300mm – total power kw 3.2, volt 380 Machine not CE compliant, for export

Key data: 300 t, 2 mm, 600 mm

Pressure: 300 tons Distance between the uprights 1800mm Side passages: Yes Installation height: 1000mm Table: 1800x1000mm Plunger: 1800x1000mm Stroke: 600mm Weight: 43 tons Height: 4700mm Siemes S7 Controller Ground-level installation Sick Light Barrier Cushion: Stroke 200mm

machine 1: Fixed side at the left, working width 220 mm to 2500 mm Workpiece overhang max. 110 mm Electronic width adjustment Panel thickness 8 - 90 mm Top pressure by belts Rolling chain with automatic lubrication, automatic pop-up dogs every 1000 mm Feed speed 10 - 40 m/min Chain infeed taking 1,62 m. panels in front of the dogs Panel alignment at the infeed Middle support NC 30 controlls Equipment left and right: 1+1 Jump universal shaper 6 kW 1+1 Twin hogging unit, motors 6,6 kW (2 motors) 1+1 Universal shaper 6 kW 1+1 Jump universal shaper 6 kW panel turning device HOMAG TD 31/30/13 Year 1989 machine 2: Fixed side at the left, working width 220 mm to 3000 mm Workpiece overhang max. 110 mm Electronic width adjustment Panel thickness 8 - 90 mm Top pressure by belts Rolling chain with automatic lubrication, automatic pop-up dogs every 1000 mm Feed speed 8 - 40 m/min Chain infeed taking ...

4-side squaring and edge banding line Machine 1: Fixed side right, moving side left Rolling chain, feed 10 - 40 m/min Controlls NC 21 Panel thickness 8 - 60 mm Max. panel width 1500 mm Edges: coil 0,3 - 3 mm, strips 0,4 - 20 mm Entry fence for veneered panels Equipment: 1+1 Compact-twin hogger, 2 motors 6,6 kW 1+1 Compact hot melt unit A20 with panel edge pre-heating, glue roller Q34, twin coil magazine, lateral pressure rollers C including anti-stick application 1+1 Free space for solid wood edges up to 2,54 m length 1+1 Rough trimming, 2 x 1,5 kW 1+1 Fine- or radius trimming, 2 x 0,4 kW (edges up to 6 mm) 1+1 Universal shaper 8,1 kW 1+1 Universal shaper 8,1 kW 1+1 Edge sander KS 10 1+1 Disc sander DS 40 1+1 Disc sander DS 40 Angular transfer to the right, TWR 24/30/12/S Panel sizes: width 250 - 1200 mm, length 250 - 3000 mm, thickness 8 - 45 mm Machine 2 Machine II + infeed magazine TW ...

Workpiece sizes: Length 180 - 2500 mm, width 150 - 800 mm, thickness 12 - 40 mm Fixed side at the left, motorised width adjustment of the right side Working height/ transport height: 920 mm Workpiecetransport with belts, infeed belts can lift up Variable feed speed Each side has got 5 glue injectors and 8 dowel inserters (Type 34) Doweldiameter: 8 mm, dowellength 30 mm, dowelprojection 7-14 mm, dowelcenters min. 32 mm, max. 736 mm Each side with dowel hopper feed with shaker and separators Controll mirror Glue pump 1:1 Glue injection controlls type ELC

Working width 180 - 3200 mm, electronic setting Sieb & Meyer Fixed side at the left Chain transport, 80 mm wide Infeed for panels of about 1 m. Top pressure by driven belts Max. workpiece thickness: 80 mm Feedspeed 7 - 35 m/min, motor 2,2 kW Pop-up dogs every 1m10 Equipment left / right: 1 st post Front: 1+1 Jump scorer, motor 1,5 kW, 100 Hz, joined to 1+1 Hogger, motor 3 / 4,4 kW, 50/100 Hz Rear: 1+1 Jump milling, tilting, motor 1,5 kW, 100 Hz 2nd post Front: 1+1 Jump milling, tilting, motor 1,5 kW, 100 Hz Rear: 1+1 Fixed milling, tilting, motor 2,2/3,3 kW, 50/100 Hz 3th post Front: 1+0 Jump milling, tilting, motor 2,2/3,3 kW, 50/100 Hz Rear: 1+1 Jump milling, tilting, motor 1,5 kW, 100 Hz All units with horizontal/vertical adjustment and Siko read-out Outfeed chain approx. 80 cm length Sound and safety enclosures

Double office container system 2x 20, nameplate not visible, no middle wall, height 281 cm, electrification, air conditioning split unit, without contents, can only be picked up if gallery above it is dismantled

Double bench grinder REMA DS04/150 built in 2013, S/N 131024008, 160x25x51 mm, 400 V

2-Shaft Mixer; with tilt function; Lining and kneading wings are made of stainless steel, 2-Z-shaped kneading blades; Length 2.90 m, width 1.30 m, height 2.10 m, trough size 64 x 69 x 55 mm Engine type ZG4 KMR 132 S4; Motor power: 7.5 kW; Motor voltage: 380/ 660 V; Rated speed motor: 1435 ... 1480 rpm; Output speed (gearbox): 160 rpm. The plant was shut down in 2024. more photos on request

Semi-automatic double clipper PolyClip PDC 600, Built in 2002, air hoses and rollers renewed, Dimensions LxWxH approx. 100x80x190cm, weight approx. 85kg, good used condition, fully functional

DEFECTS: There is a noise in the engine, video in the ad Alert on the dashboard: worn brake lining - engine anomaly - engine oil change. The vehicle is driving but we don't know the origin of the noise. Auction-ID: A3-43368-35543

Double workstation pipe system/real wood panel approx. 160 cm, superstructure, lighting, internal workstation 503

Double girder overhead crane KONE CRANES 25/25/25 t, S/N G00756, remote-controlled, span approx. 22 m, lifting capacity 25 t