128,265 used machines on RESALE, but how to find them? Machine Search
Center height: 300 mm Center width: 1000 mm Circumferential Ø: over bed 610 mm Spindle bore: 71 mm Spindle mount: size 8 Pick-up cone tailstock: 5 MK Spindle speeds: approx. 11.2 - 1800 rpm Feeds: longitudinal/flat 0.014-16/0.063-7 mm/rev Thread pitches: 0.1 - 112 mm Electrical connection: 380 V, approx. 5.5 kW Space requirement: 2900 x 1450 x 1750 mm
Center height: 400 mm Center width: 1250/1300 mm Circumferential Ø: over bed 440 mm Spindle bore: Spindle holder: Pick-up cone tailstock: 5 MK Spindle speeds: 11.2 - 2240 rpm Feeds: longitudinal/flat 0.1-2.8/0.05-1.4 mm/rev Thread pitches: Electrical connection: 380 V, 11 kW Space requirement: 3400 x 1400 x 1300/1700 mm Weight: approx. 2700 kg
Height 1230 mm Width 980 mm Length 1330 mm Weight 820 kg Power supply: 400V 50Hz 3N Total power 31.1 kW Description Screw compressor Atmos SE 270, 400 V, 31.1 kW 8 bar 4.47 m3/min
Screw press, collection container, pre-tank
Tip height: 250 mm Center width: 2000 mm Circumferential Ø: over bed 500 mm Spindle bore: 50.8 mm Spindle holder: size 6 Pick-up cone tailstock: 5 MK Spindle speeds: 22 - 2000 rpm Feeds: longitudinal/flat 0.05-6.4/0.025-3.2 mm/rev Thread pitches: 80 - 1 mm Electrical connection: 380 V, 5.5 kW Space requirement: 3600 x 1100 x 1500 mm Weight: 1875 kg
Tip height: 205 mm Center width: 1500 mm Circumferential Ø: over bed 410 mm Spindle bore: 47 mm Spindle holder: size 6 Pick-up cone tailstock: 4 MK Spindle speeds: 28 - 1250 rpm Feeds: longitudinal/flat 0.03-1.3/0.008-0.33 mm/rev Thread pitches: 0.25 - 76 mm Electrical connection: 380 V, 3 kW Space requirement: 2800 x 1100 x 1600 mm Weight: 1330 kg
Key data: 45 mm, 1350 , 298 U/min
Single Screw Extruder Cincinnati Talos 45-30 G Year of construction 2009 + Corrugator Maintools MTC 60/90 Year of construction 2006 Both machines are in good condition, and immediately available
Offer 24177 Specifications: - Tip height 180 mm - Center width 1000 mm - larger circulation – Ø over bed 355 mm - via flat sleds approx. 200 mm - Spindle bore 36 mm - Pick-up cone of the tailstock quill MK 5 - Travel of the tailstock quill 260 mm - Spindle speeds 18 - 1800 rpm -Feeds - Travel of the cross slide approx. 200 mm - Travel of the upper slide approx. 115 mm - Drive 400 V / 5.8 kW - with: - Tailstock, 3-jaw lining, bezel - Steel holder, moving center punch, - Chip tray - Space requirement approx. W 2500 x H 1500 x D 1200 mm - Weight approx. 2100 kg
- Year: 2007 - Engine: 15 hp (11 kW) - Maximum pressure: 7.3 bar
Stainless steel screw conveyer length: 15 meters. Diameter: 500mm. With drive electric motors, APV valves, protective covers and accessoiries. Dismantled into 3 lengths.
Lift-tilt system height: 8,20m. Tilt system inlet dimensions: 1100 x 1200 x 1750mm Euromorm.
Total weight 32780 kg net approx. 29500 pieces More info on request 8.8 DIN 931 Origin: South Korea
Motor power 11kW/ max. ultimate pressure 13bar Regular maintenance
Engine power 11 kW / max. final pressure 13bar Regular maintenance Engine should be replaced promptly
:::TECHNICAL SPECIFICATIONS::: CNC Model: ECS CNC Version: 4802 Self-centering diameter: 1500mm Turning diameter on the bench: 2000mm Turning diameter on the carriage: 1360mm Turning length: 4000mm Turret: automatic Number of tool turrets: 1 Number of tool positions for the first turret: 4 Number of fixed tool positions for the first turret: 4 Tailstock: yes Positioning: Automatic Chip conveyor: belt Machine equipment: Large steady rest up to 1300 mm small bezel up to 600mm Large boring bar diameter 150 by 2000 mm long
Screw conveyor, screw conveyor, screw conveyor, discharge screw - Type: Tubular auger - Screw length: 6024 mm - Drive motor: 3.00 kW - Speed: see nameplate - Housing: Galvanized steel - Screw conveyor: stainless steel 1.4301 - Screw conveyor: Ø approx. 490 mm
Screw press for cold pressing of oilseeds - Manufacturer: Reinartz - Type: AP 10/06 - Power: 7.5 kW - Processing capacity (rapeseed): 100 kg/h - Processing capacity (other oilseeds): 70 kg/h - Length: 1900 mm - Width: 600 mm - Height: 1100 mm - Weight: 900 kg
serial number: 711- 00 37 48 total power requirement: 11 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A vacuum filler for hot filling and a 4-head Alcoa capper are available. 1) Vacuum filler for hot filling, running direction: left-right, bottle formats: 1l VDF/0.5l NRW/0.33l Ale/0.75l Bordeaux, filling capacity: 5000 bottles/h. 2) 4-head capping machine Alcoa 28 MCA, year of construction: 1997, bottle formats: 0.5l NRW/1l and 0.75l Bordeaux, capping capacity: 5000 bottles/h. The two machines were part of a complete line. The capper can screw more than 5000 bottles/h, but it was limited by the filler. Both machines with complete documentation and dismantled. On-site inspection is possible. Individual purchase possible.
Center distance 11,000 mm Turning diameter 730 mm Drill height 500 mm turnable on the bench 1050 mm Motor power 22 kW
Center distance 5,000mm Height of the tips 600mm 105mm bar passage carriage equipped with grinding Machine in very good condition
Two manual capping machines and a pressure container are available. 1) Alwid capping machine, year of manufacture: 2004, operating pressure: 6bar-8bar, bottle height range: 81mm-257mm. 2) Bausch & Ströbel screwing machine, operating pressure: 4bar-6bar. 3) Müller K94073 pressure tank, year of manufacture: 2004, volume: 100l. On-site inspection is possible.
Conveyor system for powder products. Stainless steel housing with stainless steel tube. Motor mounted at bottom of machine with screw feeding device. Infeed hopper with 230 liter volume. Capacity 3 to 5 m?/h depending on product. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
Speed: 3000/min, volume flow: 3.7m³/min, overpressure: 8bar, operating pressure: 4-13.5bar, oil capacity: 10l, connected load: 22kVA, length: 1500mm, width: 850mm, height: 1200mm, weight: 672kg. Including test certificates for the pressure vessels, speed-controlled with heat exchanger for heat recovery.
Screw Conveyor system for powder and very small granule products. Stainless steel housing with stainless steel tube. Motor mounted at bottom of machine with screw feeding device. Infeed hopper with 200 liter volume and vibrating motor to assure product flow. - Specification: capacity: up to 3 m?/h depending on product, suitable to dose up to 5kg/filling | discharge height: ca. 1.850m | standard angle: 45? | diameter of pipe: 114mm | power: 380V, 0.81kW | machine dimensions: size is depending on final customized system (hopper, conveyor length and angle can be customized - also optional: mixing device) | weight: ca. 130kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 ...
An oil-free, water-injected Atlas Copco screw compressor is available. Volume flow: 1.3m³-5m³/min, max. pressure: 13bar, motor power: 30kW, machine dimensions X/Y/Z: approx. 2000mm/1000mm/1500mm, weight: approx. 1300kg, operating hours: 46000h. Documentation available. On-site inspection is possible.
Screw Conveyor system for powder and very small granule products. Stainless steel housing with stainless steel tube. Motor mounted at bottom of machine with screw feeding device. Infeed hopper with 200 liter volume and vibrating motor to assure product flow. - Specifications: capacity: up to 5 m?/h depending on product, suitable to dose up to 10kg/filling | Discharge height: ca. 1.850mm | standard angle: 45? | diameter of pipe: 141mm | Power: 380V, 1.56kW | machine dimensions: size is depending on final customized system (hopper, conveyor length and angle can be customized - also optional: mixing device) | weight: ca. 170kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30- ...
Blitz Screw Compressor+ Blitz Refrigeration Dryer+ 2000 ltr. Compressed air tank 11 bar, compressor engine 37 Kw., 5.2 cbm/min. 10 bar
with 4 capping heads Type: 97 Capacity: approx. 8,000 - 10,000 bph
Offer 25979 Operating hours 16550 h - Operating pressure 10 bar - Delivery rate 15.9 l/sec - Drive 400 V / 7.5 kW - Motor speed 3000 rpm - Air tank 250 L - Space requirement approx. W 700 x H 1830 x D 1050 mm - Weight approx. 250 kg
Tip width: 430mm Tip Height: 120mm Spindle bore: 23mm Spindle speeds: 60-3000 RPM Short taper spindle head DIN 4 Tailstock MK2 Feeds from 0.03 to 2.5 mm Weight approx. 360 kg New Aikron 3-axis digital display, brake of spindle motor renewed, technically checked. Accessories: Collet device, lathe chuck Quick-change steel holder
Stock number: PM1063, Material: Stainless acid proof steel AISI 316, In stock: Yes, Item: Eccentric screw pump, Amount in stock: 1 pc., Construction: On a stainless foundation, Motor: 0,5 kW - 220/380 Volt - 670 rpm., Theoretical capacity: 1000 l/h, Stage: 1, Working pressure : Max 4,5 bar, Dimensions inlet: Ø 1, Dimensions outlet: Ø 1, Manufacturer: Mono, Type: MD 30
Stock number: D1223, Material: Galvanized, In stock: Yes, Amount in stock: 1 pc., O-profile: Yes, Dimensions: Ø 100 x L 2980 mm., Motor: 1,1 kW, 220/380 Volt, 388 rpm, Dimensions inlet: Ø 150 mm., Dimensions outlet: Ø 150 mm.
Stock number: PM1574, Material: Stainless acid proof steel AISI 316, In stock: Yes, Item: Eccentric screw pump, Amount in stock: 1 pc., Construction: On a stainless foundation, Motor: 2,2 kW - 380/660 Volt - 1415 rpm., Theoretical capacity: 6000 l/h., Stage: 1 , Working pressure : Max 4,5 bar, Dimensions inlet: Ø 1½, Dimensions outlet: Ø 1½, Manufacturer: Mono, Type: MH40 D8
Stock number: D998, Screw conveyor, stainless steel,, U-profile., Ø 310 x L 1930 mm., 3 kW gear motor, 61 rpm., 220/380 V., With dosage screw Ø 60 mm., Material: Stainless steel AISI 304, Dimensions: Ø 310 x L 1930 mm.
Stock number: D999, Screw conveyor, stainless steel,, O-profile with inlet hopper., 2,2 KW gear motor,, 220/380 volt., Ø 250 x L 2180 mm., Material: Stainless steel AISI 304, Dimensions: Ø 250 x L 2180 mm.
Stock number: D971, Screw conveyor, stainless steel,, o-profile., Ø 170 x L 1580 mm., 1,5 kW gear motor, 71 rpm., 220/380 V., Material: Stainless steel AISI 304, Dimensions: Ø 170 x L 1580 mm.
Stock number: D936, Draining screw conveyor, stainless steel,, Iras type TU, 5,5 kW gear motor., 65 rpm., 400/690 V., Draining screen with, 5 x 20 mm. gap., Ø 400 x 3800 mm., Material: Stainless steel AISI 304, Dimensions: Ø 400 x 3800 mm.
Stock number: D654, Screw conveyor, stainless steel,, O-profile., 2,2 kW gear motor, 70 rpm, 380 V., Ø 250 mm outlet with bag squeezer., Ø 160 x 2050 mm screw., Material: Stainless steel AISI 304, Dimensions: Ø 160 x 2050 mm.
Stock number: D656, Screw conveyor, stainless steel,, BM., 100 l. product funnel with flexible screw., Ø 60 mm., 1,1 kW gear motor, 397 rpm, 380/420 V., Litre: 100 , Material: Stainless steel AISI 304
Stock number: D653, Screw conveyor, stainless steel,, O-profile., 1,1 kW gear motor, 18,8 rpm, 220/380 V., Ø 140 x L 1950 mm snekke., Material: Stainless steel AISI 304, Dimensions: Ø 140 x L 1950 mm.
Stock number: D605, Screw conveyor, stainless steel,, O-profile., Inlet connection branch Ø 230 mm., Outlet connection branch 940 x 250 mm., 1,1 kW, 6,2 - 43 rpm, 220/380 V., Ø 250 x L 1950 mm., Material: Stainless steel AISI 304, Dimensions: Ø 250 x L 1950 mm.
Stock number: D609, Screw conveyor, stainless steel,, trough type,, Ø 250 x L 3380 mm., Material: Stainless steel AISI 304, Dimensions: Ø 250 x L 3380 mm.
Stock number: D563, Screw conveyor, stainless steel,, BENA 1996., O-profile, Ø 138 x L 1015 mm., 1,3 kW gear motor., Material: Stainless steel AISI 304, Dimensions: Ø 138 x L 1015 mm.
Stock number: D513, Vacuum screw conveyor, stainless steel,, Gerivac., Ø 150 x 2250 mm screw., 4 hp gear motor, adjustable speed., 22,5 - 158 rpm., Material: Stainless steel AISI 304, Dimensions: Ø 150 x L 2250 mm.
Stock number: D429, Screw conveyor, stainless steel,, O-profile., Ø 210 x L 1500 mm., 0,55 kW gear motor, 52 o/min., 220/380 V., Material: Stainless steel AISI 304, Dimensions: Ø 210 x L 1500 mm.
Stock number: D2025, Screw conveyor, stainless steel,, estimated 1,5 kW motor, 380 volt., U-profile,, Ø 320 x L 1720 mm., Material: Stainless steel AISI 304, Dimensions: Ø 320 x L 1720 mm.
Stock number: D1195, Screw conveyor, stainless steel/steel 37,, u-profile., 1,1 kW. gear motor,, 220/380 Volt., 28 rpm., Ø 230 x L 2000 mm., (Fits SD067)., Material: Stainless steel AISI 304/steel 37, Dimensions: Ø 230 x L 2000 mm.
Stock number: D1181, Screw conveyor, stainless steel,, 0,55 kW gear motor., 121 rpm,, 220/380 Volt., U-type with lid and washing pipe,, obliquely placed on legs., Ø 200 x L 1700 mm., Material: Stainless steel AISI 304, Dimensions: Ø 200 x L 1700 mm.
maximum number of results exceeded
please refine your search
