136,773 used machines on RESALE, but how to find them? Machine Search
Offer via Gebr. Tube cutting machine Fabr. GF GEORG FISCHER Type RA12 Specifications: Pipe outer diameter 215-325mm Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed Speed levels electronic 1 - 6 Power 1600 W used, in good condition.
Specifications: Tube outer diameter 124-230mm (4" - 8") Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 40 - 215 rpm. Speed stages electronic 1 - 6 Power 1800 W Feed module AVM 0.1 - 2.3 rpm incl. feeding unit and auxiliary unit used, in good condition.
The scope of delivery includes: 01x Rectangular tube, used Profile dimensions: approx. 50 x 30 mm Material color: orange Total length: approx. 3,660 mm Center-center hole: approx. 3,630 mm Material thickness: approx. 1.50 mm Number of boreholes: 2 pcs. Drill holeØ: approx. 10 mm Weight / pcs.: 6,150 kg Your contacts in our company: Mr. Andre Evering Mr.: Mario Klöver Lord: Falk German General information about the item: This item is offered for pickup only. In addition, a desired transport or shipment of this article is with additional costs, which are charged separately depending on the place of delivery. or scope of delivery can be queried from us.
Offer via gebr. overhauled pipe cutting and chamfering machine Fabr. Georg Fischer / Orbitalum Type RA8 Year of construction 2007 Specifications: Tube Outer Diameter 124-230mm (4" - 8") Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 150 - 270 rpm. Electronic speed levels 1 - 6 Power 1600 W incl. mounting plate, assembly table used, in good condition.
Manual Pipe Bending Machine, Pipe Bending Machine, Mandrel Bending MachineHand Pipe Bending Machine, Hand Wire Bending Machine, Bending MachineManufacturer: MEWAGing Power: max. 16 mm1 piece bending tool 15 mm with 25 mm bending radius1 piece bending tool 10 mm with 16 mm bending radius1 piece bending tool 8 mm with 9 mm bending radius1 piece bending tool 6 mm with 8 mm bending radius1 piece bending tool 5 mm with 8 mm bending radius- Turning plate with degree marking- Scope of delivery as shown- Wooden box for storageDimensions L x W x H: 570 x 480 x 145
The scope of delivery includes: 01x Rectangular tube, used Material colour: orange Overall length: approx. 1,980 mm Center – center hole: approx. 1,935 mm Profile dimensions: approx. 52 x 42 mm (WxH) Material thickness: approx. 2.00 mm Borehole Ø: 9 mm Weight: 5.04 kg | Pcs. General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.
Pipe cutting system with optical laser marking detection The FZH Vario Flex is a fully automated pipe cutting system. It is specially designed for the precise, process-reliable cutting of stainless steel pipes (e.g. for fuel, brake, air conditioning or hydraulic lines). The system has optical laser marking detection. The control panel can be used to choose whether the cut is triggered mechanically (e.g. on the back of a union nut) or fully automatically via the optical detection of a laser mark applied to the tube. Thanks to the integrated rotating 3-jaw cutting head and a micro spray unit (minimum quantity lubrication), machining is extremely gentle on the tool. The pipes remain almost completely dry and free of coarse dirt. The entire process from insertion to clamping, separating and depositing is highly automated in a material-friendly cycle process. Fully integrated ...
Auction-ID: A1-51321-111
Mixed lot of heavy-duty plumbing, pipe-working, lifting and general workshop equipment supplied with a large stackable steel storage container. Main equipment visible: Manual pipe threading die head with long operating handle Additional large manual threading/die stock with twin handles Large adjustable tap/die holder with long handles Additional long-handled threading/tool holder Assorted threading dies/cutters in small box Heavy-duty blue lifting/snatch block with large hook Hydraulic bottle jack, green/red Additional hydraulic bottle jack Heavy-duty pipe vice / pipe clamping stand Folding metal pipe/work support stand Bench-type screw vice/clamp Large pipe wrenches and open-ended spanners Various long operating bars, handles and extensions Assorted steel brackets, discs, fittings and miscellaneous workshop tools Auction-ID: A1-51282-56
Double pipe heat exchanger pipe heat transfer for biogas plant, sewage treatment plant sludge hygienization - used - Manufacturer AEL GmbH Leisnig Type Double pipe heat transfer W202 Fabr. No. 7.0637.940/29-56 Built in 1997 Permissible betieb pressure 6 bar Permissible operating temperature 90°C Content 1090 l Kerb weight 6510 kg Length approx. 11 m Width approx. 3 m Depth approx. 1.5 m
used pipe points cleaning master / atlas type 02V92 construction year: In 1993 nominal width: DN200 nominal pressure: PN100 manual: no
Motor tube Notchers from ALMI AL1â2U Notching of gas -, steam -, stainless steel, non-ferrous, as well as numerous other pipes with heavy use, ALMI has developed a series of particularly efficient pipe Notchers with electric drive. Wherever ensure the Notcher ALMI extremely quickly and accurately for the correct tube recess where welded tubes at a 90 ° angle. They are suitable also for the production of double corner joints. The pipe Notchers with a 2.2 KW motor is equipped for intensive use. The engine forms a whole with special eccentric shaft, which drives the notching tool. The model AL1-2U also has a Notcher for zinc spout. The tube Notcher has a 0 voltage fuse, and a protection device. Properties High productivity Low investment costs Several diameter available immediately Ideal for double corner joints up to 5 mm wall thickness (for VA up to 4 ...
Remaining stock exhaust expansion joints Exhaust expansion joints in stainless steel with welded on 10 piece DN 130, height 305 mm 5 piece DN 105, height 290 mm 4 piece DN 145, height 240 mm 2 piece DN 135, height 240 mm 1 piece DN 95, height 270 mm 1 piece DN 160, height 230 mm 1 piece DN 215, height 470 mm 1 piece DN 210, height 300 mm 1 piece DN 130, height 320 mm 4 piece DN 160, height 300 mm 4 piece DN 260, height 330 mm 4 piece DN 205, height 315 mm 1 piece DN 220, height 260 mm 2 piece DN 260, height 325 mm 2 piece DN 310, height 325 mm 2 piece DN 340, height 325 mm 1 piece DN 305, height 330 mm 2 piece DN 220, height 300 mm 1 piece DN 135, height 245 mm This item is only fully protects
Stainless steel pipe screw with 250 mm diameter and 2,100 mm conveyor length (measured from mid inlet to middle outlet), inlet and outlet 270 mm each, with drive via intermediate gearbox and claw coupling.
Pipe conveyor screw with 270 mm diameter and 5,200 mm conveyor length (measured from center inlet to middle outlet). Drive 5.5 kW via intermediate gearboxes of gearbox construction north and claw coupling. Tree speed: 49 UPM; Spiral rise: 125 mm.
Recon Part number: 1227 7624 / 1227 5580 Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us
Pipe conveyor screw with 270 mm diameter and 5,000 mm conveyor length (measured from center inlet to middle outlet). Drive 5.5 kW via intermediate gearboxes of gearbox construction north and claw coupling. Tree speed: 49 UPM; Spiral pitch: 130 mm.
Machine is used for the processing of pipe and pipe components, including thread cutting in terms of the single and mass production. Diameter range of processable pipes: 70-290 mm Max diameter of processable work-piece: -Over stand: 800 mm -Over support: 450 mm Diameter of spindle hole: 300 mm Max turning length: -With bevel ruler: 800 mm -W/O bevel ruler: 420 mm Amount of spindle speeds: 12 Limits of spindle rotation frequency: 8-355 turn/min Amount of longitudinal and cross support servings: 32 Limits of: -Longitudinal servings: 0,064-1,025 mm/turn -Cross servings: 0,034-0,458 mm/turn Step limits of cuttable: -Metric threads: 1-12 mm -Inch threads (amount of threads for 1): 2-24 Max turn angle of bevel ruler: +- 10 degrees Overall machine dimensions: -Length: 3600 mm -Width: 1860 mm -Height: 1525 mm Machine weight with electric equipment: 9050 kg
Pipe conveyor screw with 270 mm diameter and 2,900 mm conveyor length (measured from center inlet to middle outlet). Drive 5.5 kW via intermediate gearboxes of gearbox construction north and claw coupling. Tree speed: 49 UPM; Spiral pitch: 130 mm.
used
Qty. 1 Second-hand JCO pipe welding line Mfc.: Korean Company Installation date: 11 - 2008 Production types: KS, JIS, ASTM, API, Material: API 5L. 2B.X-80under mild steel Product capacity: 70,000 ton/year Product size O.D.: 406 – 1676 mm - 16”~66” Length: 5~16 m Wal Thickness: 9~80 mm Voltage supply: 440 V or 380 V, 220 V, 60 Hz Manufacturing process: Plate stacking Edge Milling Pre Bending Press Forming Tack Welding Welding Calibration Machining Pipe Ends Hydro Static Test NDT (RT & UT)
Pneumatically operated. Diameter: 180 mm 200 mm 220 mm 250 mm
ELMETHERM 27 x 4.4 m furnace for plastic pipes was manufactured in 1997 in France. The furnace is used in the process of heating and shaping single-layer plastic pipes with a maximum wall thickness of 3 mm and a diameter from 8 mm to 35 mm. The workpieces are preheated in the machine’s heating pipes and then vulcanised and shaped at 168°C. At the very end, the plastic pipes are moved to a special cooling tunnel, where they are cooled with air at 42.8°C. Automated heat treatment of large quantities of workpieces is possible due to the use of conveyors in the machine that transport the workpieces between the different stages of the process. All functions, such as switching on heating or cooling, are controlled via the SCHNEIDER MAGELIS HMI touch panel. The gas furnace for moulding PA plastic pipes weighs approximately 35000 kg. Technical data of the ELMETHERM 27 x 4.4 m industri ...
Raw steel DN 1000 wall thicknesses from 11.9-15.7 mm PE coated inside coated length: 1-3 m in short pieces 5-18 m long pieces Inside length 18 m coated steel pipes DN 1200 PE-jacketed
dimensions: length 643 mm width 410 mm weight 14,5 kg material 1.4301 / AISI 304 suitable for fruit and vegetable juices scope of delivery: two pipe-screens, flap valves and tees piped, with cans 0,25 mm, 2x connection parts with slotted nut DN25 ; new machine - top condition
Professional steel shears for tin locksmiths, assembly plants, Teaching work pieces, particularly stable construction stable application with shear encoder made of encoded steel tooth lever translation lever securing via rotary spring knives made of high-quality tool steel, hoisted and ground continuously adjustable holder cuts of sheets, flat steel steel mm: 18 knife length mm: 175 Net weight kg: 47.5 room requirements approx.0.5x0.25x2 m; ready for use
- Pipe clamp / pipe clamp 12307351 & Strip / strip 12302221 MWM - Suitable for several motors - Please note! Price for pipe clamp and strip. Can also be delivered separately on REQUEST. - 12307351 & 12302221 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting f ...
Hard PVC pipe extrusion plant for tubes D28/D30/D33, consisting of: Battenfeldextruder B45-24 d, ESDE tube crosshead K 010, vacuum calibration with water bath, Graewe-band trigger BA63, Graewe Abstech-and at chamfer machine STS50, various sleeves, cores, calibrations and jaws, as well as additional tube crosshead Battenfeld RS 8-40
- Tube Bundle 12276572 MWM - Suitable for several motors - Please note! Price per piece! The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new technologies a ...
- Oil line oil pipeline MWM 12302232 - Suitable for several motors - Please note! Price per piece! - 12302232 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integra ...
- Intake manifold air intake pipe MWM 12452139 - Suitable for several motors - Please note! Price per piece! - References -> 12452137 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constant ...
- Intake manifold air intake manifold MWM 12136619 - Suitable for several motors - Please note! Price per piece! - References -> 12136620 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By cons ...
- Cooling water line cooling water pipe MWM 12300128 - Suitable for several motors - Please note! Price per piece! - References -> 12300129 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By co ...
- Oil line MWM 12303498 - Suitable for several motors - Please note! Price per piece! - References -> 12303499 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integra ...
- Cooling water line MWM 12300538 - Suitable for several motors - Please note! Price per piece! - References- > 12300535 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting a ...
- Cooling water line MWM 12300048 - Suitable for several motors - Please note! Price per piece! The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new technol ...
- Raw water line MWM 12141963 - Suitable for several motors - Please note! Price per piece! The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new technologie ...
- Cooling water line MWM 12300542 - Suitable for several motors - Please note! Price per piece! The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new technol ...
Pipesdiameter outside 42 mm/ DN 32 = € 3,95/ meter 48 mm/ DN 40 = € 4,25/ meter 60 mm/ DN 50 = € 5,25/ meter 76 mm/ DN 65 = € 6,95/ meter 89 mm/ DN 80 = € 7,25/ meter 114 mm/ DN 100 = € 9,75/ meter 139 mm/ DN 125 = € 11,95/ meter
Hilco Industrial is the selected partner by Hyundai RB to facilitate the sale of new LSAW Welded Pipe complete production lines as well as individual machinery, designed and manufactured by Hyundai RB (South Korea). Based on excellent production capacity achieved over more than 25 years’ experience, Hyundai RB developed its own S.A.W. pipe production lines featuring JCO Press Bending. LSAW Welded Pipe Production Line Main Equipment and features: Shot Blasting – Max 6m/min x width 4,800 Edge milling – Φ800 cutter type x 130kw – Quick tool changing – Max. milling speed: 6m/min. – Automatic calculation of number of milling – Automatic width checking Edge-Bending (Pre-Bending) – 1,500 ton/8t ~60t/6~13.5m – Quick size changing – Max. bending thick.: 60mm JCO Press Bending – 6,000/8,000/10,000 ton (max.13.5M) – PLC with CNC (Recipe memory) ...
Offer via gebr. outdated - pipe separation and chamfering machine Fabr. GF Type RA4 Saw has been completely overhauled and tested. - Engine re-stored and new seal. - Gearbox re-stored and new seals Technical data: Outer pipe diameter 15-120mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 150 - 270 rpm. Speed levels electronically 1 - 6 Power 1600 W incl. mounting plate used, in good condition.
Hamilton FLOW PCR Setup Instrument The Hamilton FLOW PCR Setup Instrument is a benchtop robotic workstation for fully automated preparation of PCR and qPCR reaction approaches, designed to minimize manual pipetting errors and increase sample throughput. It is typically used in conjunction with Roche Life Science products (such as the MagNA Pure 96 System and LightCycler® 480 Instrument) as part of the FLOW solution. Features and Specifications The Hamilton FLOW PCR Setup Instrument (PSU) is characterized by its precision and ability to integrate into automated workflows. Automation: It automates the pipetting and distribution of PCR components (samples, master mixes, primers) in 96- or 384-well PCR plates. Volume range: The hardware is designed for aspiration and delivery of volumes up to 1 ml. Traceability: It has automatic tracking of barcodes on accessories and con ...
Soundproofed, silent duct fan, TD2000, D315mm, S&P, new Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, - has very slight storage marks, no effect on function 83 x 40 x 40cm, ca. 30kg 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law applies without exception and court location St. Pölten.
Offer via gebr. outdated pipe cutting and chamfering machine Fabr. GF GEORG FISCHER Type RA8 / RA230 Saw has been completely overhauled and tested. - completely new engine. - Gearbox re-stored and new seals Technical data: Outer pipe diameter 124-230mm (4" - 8") Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 40 - 215 rpm. Speed levels electronically 1 - 6 Power 1800 W incl. mounting plate used, in good condition.
Offer via gebr. outdated - pipe separation and chamfering machine Fabr. GF Type RA6 Saw has been completely overhauled and tested. - Engine completely new - Gearbox re-stored and new seals Technical data: Outer pipe diameter 75-183mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 40 - 215 rpm. Speed levels electronically 1 - 6 Power 1800 W incl. mounting plate used, in good condition.
Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Manufacturer: Perthel, pipe bending tool for profile bending machine -Profile diameter: Pipe size 16 - 76 mm / 3/8 to 3 1/4 -Dimensions: 1020/310/H170 mm -Weight: 28 kg
maximum number of results exceeded
please refine your search
50 € 
