double pipe used for sale

Key data: 30 t

Hydraulic press can be used in a variety of ways as an assembly press, small series press, manual insert press or heating press in double-column presses Design (H-press) A tour of the press is possible at the Ennepetal camp. It is a 2.5-year-old, unused press with no operating hours, which is sold with a full warranty. List price: 45,000 Technical details: Robust machine frame Capacity: 30 tons – at 300 bar Pump ASC: 28.5 liters/min. Engine: 11 kW – 15 hp Oil tank: 600 × 450 × 500 mm – with approx. 100 litres Cylinder piston: Ø 110 mm Cylinder inside: Ø 70 mm Stroke: 500 mm Fast forward: 45 mm/s Return: 55 mm/s Guides: Ø 50 mm Table top: 800 × 550 mm – with T-slots Plunger plate: 700 × 500 mm – with T-slots Total weight: 2000 kg Valves from BoschRexroth Control cabinet technology from renowned manufacturers Press table size 700 × 500 × 7 ...

Max. saw length: 5000 mm Max. saw blade diameter: 450 mm Automatic positioning of length and angle (90° or 45°) Moving roller conveyor Material support Minimum quantity spraying device

pressure: 200 t stroke: 150 mm table surface area: 850x650 mm ram surface: 730x560 mm weight of the machine ca.: 8 t dimensions of the machine ca.: BxTxH 2000x2500x3600mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

for production of forgings by forging of ferrous, non-ferrous metals and alloys in the hammer dies model M212 Impact energy, 50 kJ Nominal weight of falling parts, kg 2000 Stroke woman, mm 1200 Stroke woman, mm 1200 Machine dimensions Length Width Height (mm) 3650X1660X5310 Weight kg 58.310, spare parts available

max. dia. of grinding wheel: 175 mm boring diameter: 32 mm max. width of grinding wheel: 25 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Double reel, reel, unwind reel -Unwind reel: Double reel with 2 servo motors (each reel driven individually) -Drive: 2 Nucleus NUDrive MP85 10A Bgr2 R Rev2 IP64 servo motors -Reel: Ø 1050 mm -Photos: see photos -Dimensions: 1050/840/H1755 mm -Weight: 200 kg

pressure: 200 t distance between columns: 500 mm stroke: 150 mm ram surface: 320 mm table surface area: 470x400 mm weight of the machine ca.: 12 t dimensions of the machine ca.: 2000x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 1.35 kW -Speed: 1500 rpm -Grinding discs: Ø 300 x 40 mm -Operating voltage: 380 volts

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 3 kW -Grinding discs: Ø 400 mm -Operating voltage: 380 volts -Weight: 200 kg

-Stainless steel, work table -Design: stable -filing -double-sided table -Dimensions: 2000/1800/H800 mm -Weight: 100 kg

pressure: 630 t passage width: 1390 mm stroke: 400 mm table surface area: 1390x1250 mm total power requirement: 75 kW weight of the machine ca.: 36 t dimensions of the machine ca.: BxTxH 3200x2800x4000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 160 t distance between columns: 850 mm stroke: 400 mm ram surface: 800x700 mm : 300 mm pressure of ejector: 20 t table surface area: 800x700 mm total power requirement: kW weight of the machine ca.: 12 t dimensions of the machine ca.: 1800x1800x4200 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 360 t stroke: 60 mm table surface area: 525x430 mm no. of strokes: 60 Hub/min : 40 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

-Stainless steel, work table -Design: stable -filing -double-sided table -Dimensions 2000/1800/H810 mm -Weight: 117 kg

-Stainless steel work table -Design: stable -filing -double-sided table -Dimensions: 2000/1800/H800 mm -Weight: 120 kg

pressure: 40 t distance between columns: 600 mm stroke: 150 mm table surface area: 600x410 mm ram surface: 220x130 mm table height: 850 mm weight of the machine ca.: 2,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 1.1 kW -Speed: 1745 rpm -Grinding discs: max. Ø 315 mm -Operating voltage: 380 volts -Weight: 230 kg

pressure: 300 t passage width: 1350 mm stroke: 500 mm column travel -side: 830 mm table surface area: 1350x1380 (1870x1380) mm table height: 1060 mm total power requirement: 45 kW weight of the machine ca.: 20 t dimensions of the machine ca.: BxTxH 2500x2000x3950 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Double switching element, 1-stage DEMAG CBD1 87466744 500 V 20 A New ! Dimensions: 65 x 65 x 65 mm

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 1.1 kW -Speed: 1410 rpm -Grinding discs: max. Ø 300 mm -Operating voltage: 380 volts -Weight: 200 kg

pressure: 25 t distance between columns: 580 mm stroke: 150 mm dayligth: 370 mm table surface area: 560x400 mm ram surface: 400x350 mm hole in the table: 80 mm weight of the machine ca.: 2,5 t dimensions of the machine ca.: 1500x500x2500 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Double hook - depth caliper, depth thrust gauge PAGUS 0 - 300 mm pitch: 0.1 mm beam length: 94 mm New ! Dimensions: 377 x 94 x 10 mm

Platform trolley, transport trolley, shelf trolley, sorting trolley, order picking trolley, mobile racking -Width: 620 mm -Depth: 800 mm -Height: 1660 mm -Quantity: 2 available Price: per piece -Weight: 50 kg/piece

Double transformer, toroidal transformer SCHUTTERMANN 2 x RV 230/B ( 2xRV230/B ) Baugr. G260 IP00 2 x 8 A Prim. 2 x 230 V sec. 2 x 0 - 230 V 50 - 400 Hz Regeltransformo für 2 x LU29 ! Dimensions: 340 x 190 x 190 mm

Double hook - depth caliper, depth thrust gauge PAGUS 0 - 300 mm pitch: 0.05 mm beam length: 98 mm New ! Dimensions: 380 x 98 x 10 mm

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 1.1 kW -Speed: 1410 rpm -Peripheral speed: 45 m/s -Grinding discs: max. Ø 300 mm -Operating voltage: 380 volts -Weight: 290 kg

Double Hydraulic Pump with Motor and Radiator CASAPPA PLP 10.3.15/81 E1/1 ( PLP10.1 3.15/81E1/1 ) 0.2 D-EL-FS and PLP 10.2 D -88V6-L BB/BA-N-EL-P-FS oil cooler RAJA-LOVEJOY KPV200/100/448/D24/DF/ZR KP2000111 Engine: 1.5 kW 220 / 380 V IP55 used, tested ! Dimensions: 500 x 280 x 260 mm

Double Diaphragm Pump KURT SCHMIDT FARBSPRITZANLAGEN Dimensions: 250 x 240 x 310 mm

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Engine power: 1.5 kW -Speed: 1430 rpm -Grinding discs: max. Ø 300 mm -Operating voltage: 380 volts -Dimensions: 700/550/H1200 mm -Weight: 170 kg

Double flange, pipe connector PAGUS DN 125/139 DIN 2576 PN 10 width 80 mm flange: Ø 250 mm stainless steel flange ! Dimensions: 250 x 250 x 80 mm

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 0.37 kW -Speed: 2900 rpm -Grinding discs: max. Ø 175 mm -Operating voltage: 380 volts -Dimensions: 420/390/H1150 mm -Weight: 65 kg

Double pressure gauge for fine measurements, pressure gauge MESSGERÄTEWERK BEIERFELD 1/FM220 2 x 0 - 60 kp/cm² (0 - 60 bar) TGL16374 Accuracy class: 0.0.2 6 Housing diameter: Ø 150 mm Connection thread: 2x M20 x 1.5 New ! Dimensions: 220 x 180 x 75 mm

Double bench grinder WMW Type ST300 Year: 1970 Disc drm.: 300 mm Power: 1.1 kW Dimensions: 750 x 420 x 1200 mm

Double pressure gauge for fine measurements, pressure gauge MESSGERÄTEWERK BEIERFELD 1/FM220 2x 0 - 25 kp/cm² (0 - 25 bar) TGL16374 Accuracy class: 0.25 6 Housing diameter: Ø 150 mm Connection thread: 2x M20 x 1.5 New !' Dimensions: 220 x 180 x 75 mm

Double bench grinder SOLID DS300STA Disc diameter Ø max 300 mm Disc width max 40 mm 1.5 kW 1500 rpm 220 / 380 V Dimensions: 700 x 530 x 1100 mm

Double bench grinder VEM SEWStNa40SENa350 Disc diameter Ø 350 / 350 mm Disc width 63 / 40 mm with cooling device 1,1,1,000 5 kW 3000 rpm 220 / 380 V Dimensions: 1050 x 950 x 1300 mm

Double Ball Valve 3-Way HYDAC KHB-SO1111 PN10BAZ 3235764-0 Pneumatic Actuator Zero Series pmax 10 bar DSA-046/180 60000556 New ! Dimensions: 180 x 115 x 50 mm

Double bench grinder, brush deburring machine, deburring machine VEM, ELBTALWERK SEWStN40SEN350 disc diameter Ø 350 / 350 mm Disc width 63 / 40 mm with a wire brush ! 1.5 kW 1500 rpm 220 / 380 V used, tested ! Dimensions: 1400 x 800 x 1250 mm

Double bench grinder GISAG SE 2x400/1 TGL 24500 Disc diameter: Ø max 400 mm 4 kW 380 V Protective cover is missing !' used, tested !' Dimensions: 1100 x 700 x 1200 mm

Double hydraulic pump, oil pump, gear pump -Shaft mounting: Ø 21.5 mm -Number: 3x hydraulic pumps available -Price: per piece -Dimensions: 270/120/110 mm -Weight: 6.7 kg

Double Ball Valve 3-Way HYDAC KHB-SO1111 PN10BAZ 3235764-0 Pneumatic Actuator, Zero Series < -br />pmax 10 bar DSA-046/180 60000556 used / repaired Prototype 1+4 Dimensions: 180 x 115 x 50 mm

Double ring wrench offset HEYCO NW 65 / 70 chrome vanadium DIN 838 / ISO 1085 New ! Dimensions: 710 x 110 x 75 mm

Double hydraulic pump, oil pump, gear pump -Shaft diameter: Ø 22.5 mm -Dimensions: 310/120/110 mm -Weight: 9 kg

Double hydraulic pump, oil pump, gear pump -Shaft diameter: Ø 22.5 mm -Dimensions: 300/120/110 mm -Weight: 9 kg

CNC turning-milling center Emco Hyperturn 65 Powermill SMYB Commissioning 7/2019 At call! Siemens 840D-SL Shopturn Main spindle BigBore spindle passage 76mm KK8 - 4,000 1/min Sub-spindle KK6 - 5,000 1/min 40-speed chain magazine HSK-T63 Turret bottom VDI30 / Sauter Electronic handwheel Emco Tool Breakage and Wear Gear milling Shopturn Expansion Pack 5-axis simultaneous machining Energy management for Sinumerik OPC UA / Siemens interface 3D machine model Emco Standard Bar Feeder Interface Machine Status Lamp LED Multiflow Cleaning Gun Oil Mist Separator Belt filter system with IKZ Main Spindle Clamping Hook Hainbuch Clamping Top Mini Combi Ax Hoist Sub-spindle Schunk 185mm THW-plus with hard jaws The options list is complete! No interest in dealer enquiries! No separate dealer price! WB mechanics GmbH is a precision mechanics workshop that markets its ...

Double hydraulic pump, oil pump, gear pump -Shaft diameter: Ø 22.5 mm -Dimensions: 300/120/110 mm -Weight: 9 kg

Double hydraulic pump, oil pump, gear pump -Shaft diameter: Ø 22.5 mm Price: per piece -Quantity: 2 available -Dimensions: 300/120/110 mm -Weight: 9 kg

Double hydraulic pump, oil pump, gear pump -Shaft mounting: Ø 21.5 mm -Dimensions: 300/120/110 mm -Weight: 9 kg

grinding length: 8400 mm grinding width: 1450 mm workpiece height: 1250 mm surface area: 8000 x 1250 mm table height over floor: 920 mm distance between columns: 1470 mm workpiece weight max.: 59700 kg weight of the machine ca.: 59,7 t dimensions of the machine ca.: 22 x 5 x 5 m Adjustment ranges: -Crossbeam, vertical 1250 mm -Grinding support, horizontal 3100 mm Adjustment speeds: -Machine table (X-axis) infinitely variable 1-45 m/min Table creep speed 5 m/min -Grinding support, horizontal (Y-axis) Rapid traverse 3000 mm/min Feed, step 0.001-0.099 mm Feed rate, continuous 100-3000 mm/min Creep speed 18+1 mm/min Tip infeed 0.001-0.019 mm -Crossbeam (W-axis) Rapid traverse 410 mm/min Table drive: -Oil transmission, Type Iv4 -Cylinder-Ø 185 mm -Piston rod Ø 130 mm -Drive motor 22 kW The data for this ad was created with ModulMWS - the  ...

CONTROLS   CNC controls SIEMENS 840 D WORKING RANGE (DOUBLE DISC GRINDER)   Grinding wheel diameter: 750 mm   grinding width max. - throughfeed grinding: 180 mm   material thickness max. - throughfeed grindin: 30 mm   grinding width max. - plunge cut grinding: 300 mm   material thickness - plunge cut grinding: 80 mm GRINDING SPINDLE 1   drive power: 48 kW GRINDING SPINDLE 2   drive power: 48 kW COMPONENT-FEEDER   Feeder Design: rotary Feeder   feeder velocity max.: 20 mm/min   feeder velocity min.: 240 mm/min DIMENSIONS / WEIGHTS   space requirements -left/right-: 4900 mm   space requirements -front/back-: 5000 mm   total height: 3100 mm   total weight approx.: 13000 kg with inline measuring system DISKUS IONIC 17A Emulsion treatment system HÜTTNER F6-157, YOM 2006