double pipe used for sale

: neu : ca. 4 Wochen ab Auftragse : Italien : 10900 € : 209.28 € : 60 mm : 595 mm : 363 mm : 900 mm : 130 kg : 10.5 cm³ : 60 x 3 mm : 2Gas x 3,91 mm : 60 x 4 mm : 60 x 2 mm : 60 x 4 mm : 60 x 4 mm : 64 x 4 mm : 64 x 4 mm : 60 x 4 mm : 50 x 4 mm : 35 mm : 60x30x4 stehend, 60x40x5 mm : 300 mm : 10 mm : 10 mm : 1,25 / 2,50 U/min : 1.5 kW digital read out for bending angle manual clamping material spring back compensation digital read out and zero setting for clamping point 2 speeds overload protection mobile by rolls and handle tools not included The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Italien : 12460 € : 239.23 € : 60 mm : 500 mm : 760 mm : 1000 mm : 186 kg : 10 cm³ : 60 x 4 mm : 2 x 3,91 mm : 60 x 4 mm : 60 x 2 mm : 60 x 3 mm : 60 x 6 mm : 64 x 6 mm : 64 x 6 mm : 63 x 4 mm : 50 x 4 mm : 35 mm : 35 x 35 mm : 60 x 20 stehend, 60 x 35 mm : 380 mm : 10 mm : 10 mm : 1,5 / 3 U/min : 1.5 kW quick-change tooling system digital display of bending angle material spring back compensation foot pedal for hands-free operation accurate counterbending die positioning users manual tools not included, priced on request The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2019 : 5505 : prompt, Zwischenverkauf v : Niederlande : 2670 € : 1 : 100 x 2.000 mm : 20 - 76,1 mm : 1 : 3 kW : 190 kg DEMO MACHINE / MINT CONDITION The lever operated AL100U-01 can grind material from Ø 20 mm to Ø 76.1 mm. Its compound slide and carriage with rotatable clamp are continually adjustable allowing the machine to grind all pipe sections at any angle between 30° and 90°. The ALMI AL100U-01 can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of materials. ALMI’s belt tensioning system simplifies tensioning the grinding belt. The belt is tensioned using the hexagonal spanner supplied with the machine. The grinding belt can be tensioned quickly and the grinding rollers can be changed in seconds. All pipe grinders are equipped with a deburring table. Incl. 5 pcs. grinding belts, 1  ...

UNUSED, Metal casing pipes for pile driving. Normally used in the construction of bridges, ports, decks, and piers. The driven pipes is filled with concrete, creating an extremely resistant structure. Total available weight is 750 tons. SALES VALUE PER TON $ 1.000,00 USD / KG

: gebraucht : 2023 : 5543 : prompt, Zwischenverkauf v : Niederlande : 3100 € : 1 : 100 x 2.000 mm : 20 - 76,1 mm : 1 : 3 kW : 190 kg Demo machine / mint condition Net price (price for new machine € 3.798,00) The lever operated AL100U-01 can grind material from Ø 20 mm to Ø 76.1 mm. Its compound slide and carriage with rotatable clamp are continually adjustable allowing the machine to grind all pipe sections at any angle between 30° and 90°. The ALMI AL100U-01 can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of materials. ALMI’s belt tensioning system simplifies tensioning the grinding belt. The belt is tensioned using the hexagonal spanner supplied with the machine. The grinding belt can be tensioned quickly and the grinding rollers can be changed in seconds. All pipe grinders are equipped with a d ...

: neu : ca. 8 Wochen ab Auftragse : Italien : 29100 € : 555.81 € : 100 mm : 500 mm : 1200 mm : 850 mm : 480 kg : 43 cm³ : 100 x 6 mm : 3 1/2 x 4 mm : 100 x 6 mm : 100 x 3,6 mm : 100 x 3,6 mm : 114,3 x 6,3 mm : 114,3 x 6,3 mm : 114,4 x 6,3 mm : 88,9 x 3,65 mm : 100 x 5 mm : 70 mm : 100 x 25 stehend, 100 x 5 mm : 400 mm : 36 mm : 10 mm : 0 - 1,3 U/min : 3.5 kW quick-change tooling system digital display of bend material spring back compensation remote control of bend, return and emergency stop functions accurate counterbending die positioning footswitch 3 hexagonal tool holders heavy-duty steel gear case users manaul tools not included, prices on request The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

20t pulling force, CW05 head plate, suitable 2.7t mini excavator, 360 degree rotating head, including various pulling cables, 20 to 25 meters bridgeable Auction-ID: A1-45424-33

Unused machine Auction-ID: A1-45188-76

Offer 26102 Technical data: - Cutting range 140 - 330 mm - Wall thicknesses up to 5 mm - 6 cutting speeds 95 - 230 1/min - Central pipe clamping via handwheel - Man. Rotary drive / cutting drive - Height-adjustable sawing unit - Drive 220 V / 1200 Watt - Space requirement approx. W 900 x H 1000 x D 400 mm - Weight approx. 400 kg - 2 x roller conveyor 1500 mm

Offer 26101 Technical data: - Cutting range 29 - 119 mm - Wall thicknesses up to 5 mm - 6 cutting speeds 95 - 230 1/min - Central pipe clamping via handwheel - Man. Rotary drive / cutting drive - Height-adjustable sawing unit - Drive 220 V / 1200 Watt - Space requirement approx. W 900 x H 1000 x D 400 mm - Weight approx. 300 kg - 2 roller conveyors 1500 mm

Offer 26100 Technical data: - Cutting range 29 - 119 mm - Wall thicknesses up to 5 mm - 6 cutting speeds 95 - 230 1/min - Central pipe clamping via handwheel - Man. Rotary drive / cutting drive - Height-adjustable sawing unit - Drive 220 V / 1200 Watt - Space requirement approx. W 900 x H 1000 x D 400 mm - Weight approx. 300 kg - 2 roller conveyors 1500 mm

Thermo Scientific Model E1-ClipTip Laboratory Pipette, 0.5 - 12.5μl - 8 Channels Reference: 4672010 Multi-channel (8 channels) Compatible with cliptip 384 12.5, 12.5 Ext Calibration range: 1.25-12.5μl Volume range: 0.5-12.5μl Inter-cone spacing (mm): 4.5 - 14.2

Pipe grinding machine with 10 grinding rollers: 16.5 - 18.5 - 22.5 - 29.5 - 35 - 39.5 - 45.5 - 9.5 - 57.5 - 73.5 mm Tube clamping range 90mm Documentation (English) Belt width 100 mm Belt length 2000 mm Tube diameter 16.5 - 76 mm Angle adjustable from - to 0 - 65 degrees Connection voltage 400 V Total power requirement 2.2 kW Machine weight approx. 0.17 t Space requirement approx. 1.3 x 0.7 x 1.1 m Condition: never used / new (5) Auction-ID: A7-45761-709

Qty 2, Safe working load 1000kg, Dimensions and weight per unit. Collection by appointment only on Wednesday 20 and Thursday 21 May 2026 from 09:00 to 16:30 (BST). This item is sold ex-foundation and consequently, all the logistical arrangements, including dismantling, packing loading the goods, transport, customs, and delivery to the final destination, are the responsibility of the Buyer. Auction-ID: A7-45642-36

3 x various pipe transfer trolleys, heavy duty steel construction, approx. .9m W x 1.4m D x max height 870mm. ANR 2149 Auction-ID: A1-45187-85

Eight steel pipe storage stillages include approx. 280 blue plastic pipes approx. size of each pipe. 1.45m long, OD 170mm, ID 152mm Auction-ID: A1-45187-254

tube diameter:40-90 mm wall strength:20 mm weight of the machine ca.:11 t dimensions of the machine ca.:4 x 1,6 x 1,35 m bending radius max.:270 mm This machine is a mandrel bending machine that was designed exclusively for the production of pipe bends with pipes of 40 mm ? 90 mm outer diameter with a maximum wall thickness of 20 mm or for processing solid materials up to 70 mm outer diameter (max. section modulus 64.7 cm³) and is therefore intended only for this purpose. Scope of delivery, machine equipment, basic equipment ? Pipe length/usable length for mandrel bending: 3000 mm ? Radius range max. 270 mm ? Bending height 1050 mm ? Electro-hydraulic drive ? Clockwise bending direction ? With hollow shaft to achieve small radii ? Counter bearing rotates ? Rotates up to 180 degrees with a maximum tool radius of 270 mm ? Forward movement controlled via hydraulic cylinder with pressure va ...

Double-sided grinding and polishing bench MEYER type SMPMasch. No. 848 Year of construction 1963Shaft diameter 50 mmGrinding wheel holder 305 mmDisc spacing 1470 mmGrinding-polishing wheel diameter max. 800 mmWorking height 550 mmSpeed 710 / 800 / 950 rpm. Drive power 2x 3 kWNet connection 380 volts, 50 Hz.- two drive motors for each working side separately- star-delta switch for each drive motor separately- speed change by folding the drive belt- dust extraction flange 100 mm-

IBARMIA double drilling machine model BP-50. Year of manufacture 2005. Serial number 043285. Equipped with two drilling heads for simultaneous operations. Pneumatic workpiece clamping system. Integrated cooling system (coolant). Motor power 4.2 kW. Working speeds 750 / 1500 rpm. Electrical connection 380 V / 50 Hz. Acoustic level 78 dB(A). Machine with CE marking. Ideal configuration for series production and repetitive operations. Robust industrial construction on common base. The dimensions are approximate. Auction-ID: A7-44864-2

Quantum Qsm 175 Double Grinder Grinding Machine Double Grinding Machine Auction-ID: A7-45427-243

-Sale by owner our used lines meets after reinstallation by us the Definition RETROFIT COMPLETE equipment, incl. Filzmoser straightening system if you are interested, please request an offer Plans, pictures and CAD drawings are available, without mixer, ready for loading, Filigrandecken and double-walled movement, Filzmoser straightening system with robot. ErICH PETER MACHINES-PLANTS GMBH is engaged in complete solutions for the Realization of construction projects according to EU standards. They are not a construction company, but convey the required knowledge in theory and practice to plan, calculate and implement construction projects. Offers include: • Creation of business, master and execution plans • Sale of various machines and equipment for the production of building materials and prefabricated parts • Commissioning of the plants and personnel train ...

Cat. No. 11-3170 New without heating jacket - round standing on feet Medium-contact parts V4A (AISI 316) with electric screw-in heating 230/400 V, 7.5 kW Standard: Material: medium-contact parts V4A (AISI 316) - otherwise V2A (AISI 304) Operating pressure max 0.49 bar Container completely stained, passivated and neutralized Insulation made of mineral wool for hot water tanks thickness = 80 mm Standard: Manhole top DN 400 Ventilation and vent valve made of PVC Manhole inside oval 440 x 350 and manhole 500 x 430 outside rectangular for insulated container Test tap Stand display 24 mm Ladder bracket Residual drain with forward-drawn outlet pipe DN 50 with disc valve DN 50 with lid Digital thermometers Clear drain DN 50 with disc valve with lid Transport eyelets with electric screw-in heating, 230/400V, 7.5 kW Cat. No. Contents  ...

Cat. No. 11-3160 New Standard: Material V2A (AISI 304) Operating pressure max 0.49 bar Container completely stained, passivated and neutralized Heating jacket height 970 mm Insulation made of PU foam thickness = 80 mm Standard: Manhole top Ventilation valve made of PVC Manhole inside oval 440 x 350 and manhole outside rectangular for insulated container Test tap Stand display 24 mm Ladder bracket Residual drain with outlet pipe DN 50 Digital thermometers Clear drain DN 50 Transport eyelets Cat. No. Contents Diameter Height Cyl.Height Feet 11-3160-1 1200l 1350 mm 2070 mm 1000 mm 3 11-3160-2 2400l 1350 mm 3130 mm 2160 mm 3 Disc valve DN 50 Price on request For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 On request, we will be happy to send you our complete catalogue. All prices are ex works plus law VAT Interm ...

1 work place certified, very well received., absolutely Mint double girder overhead travelling crane with helical rope stabilized LEG / DEMAG trolley Load approx. 2 x 4,000 = 8000 kg capacity of the hub works about 2 x 6,300 = 12,500 kg Wingspan approx. 10.880 mm Hook path about 10,000 mm Make SCHEFFER Year of production/workshop test 1996/2016 Crane classification H 3 B 4 Crane equipped with: -De-MAG lifting works in FEM 3 m, schrägseilstabiliert -Demag Crane and trolley motors -Radio control -Magnetic control -Magnetic beam with sheet metal magnet -SCHENCK weighing device -Long travel with frequency inverter control Working speeds: Hoist around 1.2/12.5 m / min Trolley gear approx. 8.0/32.0 m / min Crane chassis approx. 5.0 80.0 m / min

Material: stainless steel Engine: 22 kW Content: 680 ltr. Vat tiltable. Good condition. Are you looking for something else? Write us below! WE PROJECT AND BUILD YOUR ENTIRE PLANT EXACTLY FOR YOUR NEEDS FROM USED AND NEW MACHINES.

Material: stainless steel Engine: 7,5 kW Convey length: 2850 mm Convey width: 500 mm Very good condition. You can also get the entire system with all components.

1 high quality, factory-tested, well preserved double girder crane especially suitable for the Coilumschlag Load approx. 80,000/32,000 kg Wingspan approx. 25,600 mm Hook way approx. 8,500/13,500 mm Make SIEMAG/SIEMENS Overhaul and rebuild/workshop test 2009/2016 Trolley in robust wind plant design, between the crane bridge catwalk one-sided lowered to optimize the installation height, cabin control (expandable easily on radio), operating speeds: Main hoist 80 t to approx. 4.25 m / min auxiliary hoist 32 t up to approx. 10.8 m / min Katz LG 32/80 t Max approx. 40.0/20,0 m / min Crane chassis 32/80 t Max 80.0/40.0 m / min

Cat. No. 12-2375 in a very good condition Measurements and and weight: WxDxH: 80 x 35 x 85 cm Weight: 53 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Cat. No. 12-2885 in a very good condition Measurments and weight: LxBxT: 110 x 50 x 64 cm Weight: 54 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Techno Pack double Clipper DCA E 200 fully automatic coffee machine with hanger loop dispenser Fill caliber up to 65 mm

1 factory-tested, very well preserved double girder crane with 4 wheels per side to minimise wheel loads Load approx. 100,000/32,000 kg Wingspan approx. 26,700 mm Hook way approx. 14,000 mm Make SKET-year of manufacture/overhaul/workshop test 1981/2000/2016 Very low equipped with high-quality two-rail wind work trolley with main hub usage as a mounted crane 100 t and auxiliary hoist 32 t, cabins - and radio control, ideal wheel load distribution by 4 wheels per side working speeds: Hoist main hoist 100 t up to 0.25/2.5 m / min auxiliary hoist 32 t up to approx. 7.0 m / min Trolley gear approx. 7.0/20,0 m / min Crane chassis approx. 11.0/32.0 m / min

ZENO double roller vorader ZDV 2500x2000, mobile on chain suspension, with discharge conveyor and magnetic separator, drive power 298 kW, 1900 rpm, MTU diesel engine, rotor flight circuit 575 mm, 2 x 12 rotor tools on tool holders, new design demonstration machine. ZENO Twin rotor shredder ZDV 2500x2000, mobile on chain chassis, incl. discharge conveyor and magnet separator, motor power 298 kW, 1900 rpm, MTU diesel motor, rotor flight circle 575 mm, 2 x 12 cutting inserts on tool holder, show machine.

1, used, very well preserved double girder overhead travelling crane with 4 wheels per page of optimal wheel load reduction Load approx. 110.0/50,0 t Span 23.20 m Hook way approx. 15.0 m Make Horw Workshop examination 2016 Use as very low mounting crane Equipped with high-quality, robust two-rail - wind movement trolley, ideal wheel load distribution by 4 wheels per side, catwalk along the Crane bridge, cabin, as well as floor panel (easily to expandable radio control) Working speeds: Hoist gear 110T approx. 0.3/1.5 m / min Change-over 50 t approx. 0.6/3.0 m / min Katz LG 4.0/16.0 m / min Crane chassis 10.0/40.0 m / min

Technical data: with stand, 50 Hz, DAB ED 25% Engine: 3 Capacity: 1.75 A Capacity: 736 W Voltage: 380 V

used approx. 30 m³ / 30000 litres steel tank interior coated double-walled above - ground - 2 steel base - good condition Dimensions: approx. Ø 2.00 m x about 10,00 m of the tank is coated from inside, double-walled and Get up 2 steel bases. Steel tank / container can be used as storage tank for water, manure, AHL, ASL, seeping juice, canola oil, edible oil, rain collection tank, and so on. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us a call or write, so that we can advise you personally. More information and offers on our site: profi-tanks(dot)de

Cutting length: 5000 mm blade diameter: depending on need 420-550 mm saw aggregate pneumatic swivel 45-90° Blade drive: 380 V, per 3 kW space: 6400 x 1400 x 1700 mm weight: approx. 1600 kg

appr. 40 m³ / 40,000 litres palm oil tank, steel tank, insulated, double-walled, heating coil on the inside, above ground storage container, on 2 bases manufacturer: Dehoust year of manufacture: 2007 volume: 40 m³ / 40,000 L DIN: 6616 D /6601 serial number: 17 / 07 322 leak indicator: control fluid control fluid volume: 320L diameter: ø2500 tested over-pressure: 2 bar tested over-pressure for the double wall: 0,6 bar insulation: mineral wool appr. 10-18 cm, coated with aluminium plates material: inner wall S235JR, outer wall S235JR suitable for fluids harmful to water and for both combustible and non-combustible fluids inner heating coil The container is in used condition, according to the age there are traces of use. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is ...

Kragarmregal, double-sided, 5.18m height, 1.20m arms, 870kg per arm - NEW - : Price from location incl. loading! 1 shelving unit with 4 pcs 2,495.-EUR (net)! A Kragarm shelving system, hot-dip galvanized, consisting of: 4 double-sided shelves approx. 5.18 m high, hot-dip galvanized IPE 180 / 100 with 2x3 each. Arms 1.20 m, 870 kg load capacity per arm with verbatim approx. 1.30 m shelf divider approx. 5180mm high, hot-dip galvanized foot and arm depth 1200 mm with 3 adjustable shelf arms each with centre of gravity 600 mm 870 kg per arm / 2610 kg per stalker with laengs and diagonal connectors e = 1300 mm for a shelf row with 4 stems approx. 4000 mm long with all screws and nuts, without bottom anchors . Other configurations (frame height, armrails, arm types, etc.) can be used! Please contact us! photos of an old shelf!; New

Cutting length: min/max at 90 ° 330/5000 mm blade diameter: 450/500 mm kl.90°: 330 mm blade diameter cutting length: 450/500 mm Drive motor per unit: 2,2 kW Electr. Supply: 400 V, 5.2 kW Space requirements: 6760 x 1590 x 1700 mm weight: 1550 kg

Kragarmregal, double-sided, 5.18m height, 1.20m arms, 500kg per arm - NEW - : Price from location incl. loading! 1 shelving unit with 4 pcs 2,295.-EUR (net)! A Kragarm shelving system, hot-dip galvanized, consisting of: 4 double-sided shelves approx. 5.18 m high, hot-dip galvanized IPE 180 / 80 with 2x3 each. Arms 1.20 m, 500 kg load capacity per arm with verbatim approx. 1.30 m shelf divider approx. 5180mm high, hot-dip galvanized foot and arm depth 1200 mm with 3 hoes-adjustable shelf armseached carrying capacity at load centre 600 mm 500 kg per arm / 2610 kg per staender with laengs and diagonal connectors e = 1300 mm for a shelf row with 4 stems approx. 4000 mm long with all screws and nuts, without bottom anchor s. Other configurations (frame height, armrails, arm types, etc.) can be used! Please contact us! photos of an old shelf!; New

PRECAST LINE VOLLERT FILIGREE AND DOUBLE WALL LINE precast Filigree and double wall production

Kragarmregal, double-sided, 4,16m height, 1.20m arms, 500kg per arm - NEW - : Price from location incl. loading! 1 shelf unit with 4 pcs 1.850.-EUR (net)! A Kragarm shelving system, hot-dip galvanized, consisting of: 4 shelves double-sided approx. 4.16m high, hot-dip galvanized IPE 160 / 80 with 2x3 each. Arms 1.20 m, 500kg load capacity per arm with verbatim approx. 1.30 m shelf divider approx. 4160mm high, hot-dip galvanized foot and arm depth 1200 mm with 3 hoes-adjustable shelf arms carrying ability at load centre 600 mm 500 kg per arm / 2250kg per stem with laengs and diagonal connectors e = 1300 mm for a shelf row with 4 stems approx. 4000 mm long with all screws and nuts, without bottom anchors. Other configurations (frame height, armrails, arm types, etc.) can be used! Please contact us! photos of an old shelf!; New

Kragarmregal, double-sided, 3,50m height, 1,20m arms, 500kg per arm - NEW - : Price from location incl. loading! 1 shelving unit with 4 staenders 1.750.-EUR (net)! A Kragarm shelving system, hot-dip galvanized, consisting of: 4 double-sided shelves approx. 3.50m high, hot-dip galvanized IPE 160 / 80 with 2x3 each. Arms 1.20 m, 500kg load capacity per arm with verbatim approx. 1.30 m shelf divider approx. 3500mm high, hot-dip galvanized foot and arm depth 1200 mm with 3 hoes-adjustable shelf arms carrying ability at load centre 600 mm 500 kg per arm / 2250kg per staender with laengs and diagonal connectors e = 1300 mm for a shelf row with 4 stems approx. 4000 mm long with all screws and nuts, without bottom anchor s. Other configurations (frame height, armrails, arm types, etc.) can be used! Please contact us! photos of an old shelf!; New

Kragarmregal, double-sided, 3,50m height, 1,20m arms, 750kg per arm - NEW - : Price from location incl. loading! 1 shelf unit with 4 pcs 1.900.-EUR (net)! A Kragarm shelving system, hot-dip galvanized, consisting of: 4 shelves double-sided approx. 3.50m high, hot-dip galvanized IPE 160 / 100 with 2x3 each. Arms 1.20 m, 750kg load capacity per arm with verbatim approx. 1.30 m shelf divider approx. 3500mm high, hot-dip galvanized foot and arm depth 1200 mm with 3-adjustable helving armseached each carrying ability at load centre of gravity 600 mm 750 kg per arm / 2250kg per staender with laengs and diagonal connectors e = 1300 mm for a shelf row with 4 stems approx. 4000 mm long with all screws and nuts, without bottom anchors Other configurations (frame height, armrails, arm types, etc.) can be used! Please contact us!; New

Rexroth double valve 4WRKE 25

Collar shelving, double-sided, 5, 18 m high, 1, 20 m arms, 870 kg per arm - new -: Price from site including loading! 1 shelf unit with 4 stand EUR2.495.-(net)! A cantilever rack system, hot-dip galvanized, consisting of: 4 shelf stand double-sided measures 5.18 m, hot-dip galvanized IPE 180 / 100 with each 2 x 3 verstellb. Poor 1.20 m, 870 kg capacity per arm with associations about 1.30 m Shelf stand double-sided about 5180 mm high, hot-dip galvanized Foot and arm depth 1200 mm with 3 adjustable shelf arms Load capacity at load Centre 600 mm 870 kg each arm / 2610 kg per stand with longitudinal and diagonal associations e = 1300 mm When a shelf set with 4 stands approx. 4000 mm long with all bolts and nuts, without ground anchor. Other configurations (frame height, arm length, arm types etc.) can be selected. Please speak to us! Photos of a similar rack!

2 factory-tested, well preserved double girder cranes Load capacity 5000 kg Wingspan approx. 13.630 mm Hook way approx. 4,000 mm Fabrikat MAN-SWF Year of production/workshop test 1995/2016 Cranes, floor control, freely movable equipped with SWF double girder trolleys, travels to the lower straps of the crane bridges Working speeds: Hoist approx. 0.8/5.0 m / min Katz LG 5.0/20,0 m / min Crane chassis 10.0/40.0 m / min

Collar shelving, double-sided, 5, 18 m high, 1, 20 m arms, 500 kg per arm - new -: Price from site including loading! 1 shelf unit with 4 stand EUR2.295.-(net)! A cantilever rack system, hot-dip galvanized, consisting of: 4 shelf stand double-sided measures 5.18 m, hot-dip galvanized IPE 180 / 80 with each 2 x 3 verstellb. Poor 1.20 m, 500 kg load capacity per arm with associations about 1.30 m Shelf stand double-sided about 5180 mm high, hot-dip galvanized Foot and arm depth 1200 mm with 3 adjustable shelf arms Load capacity at load Centre 600 mm 500 kg each arm / 2610 kg per stand with longitudinal and diagonal associations e = 1300 mm When a shelf set with 4 stands approx. 4000 mm long with all bolts and nuts, without ground anchor. Other configurations (frame height, arm length, arm types etc.) can be selected. Please speak to us! Photos of a similar rack!

Collar shelving, double-sided, 4, 16 m high, 1, 20 m arms, 500 kg per arm - new -: Price from site including loading! 1 shelf unit with 4 stand EUR1.850.-(net)! A cantilever rack system, hot-dip galvanized, consisting of: 4 shelf stand double-sided about 4, 16 m high, hot-dip galvanized IPE 160 / 80 with each 2 x 3 verstellb. Poor 1.20 m, 500kg load capacity per arm with associations about 1.30 m Shelf stand double-sided about 4160 mm high, hot-dip galvanized Foot and arm depth 1200 mm with 3 adjustable shelf arms Load capacity at load Centre 600 mm 500 kg each arm / 2250 kg per stand with longitudinal and diagonal associations e = 1300 mm When a shelf set with 4 stands approx. 4000 mm long with all bolts and nuts, without ground anchor. Other configurations (frame height, arm length, arm types etc.) can be selected. Please speak to us! Photos of a similar rack!