140,934 used machines on RESALE, but how to find them? Machine Search
diameter range 2-4,76 mm shaft length under head 46 mm max. cut-off length 60 mm output pieces/min 470
diameter range 2-5 mm shaft length under head 25 mm max. cutting length 37 mm output- piece/min 330
diameter range 2-5,2 mm shaft length under head 120 mm cutting length 146 mm output pieces/min 105
bushing cut-off diameter range 5 mm cutting length 50 mm shaft length under head 40 mm output - pieces/min 450
bushing cut-off diameter range 1-4mm shaft length under head 25 mm max. cutting length 32 mm output- piece/min 350
bushing cut-off diameter range 1-4mm shaft length under head 25 mm max. cutting length 32 mm output- piece/min 350
Key data: 108 mm
Theysohn TTS 108-26/CON 40 with coexrurder 40 mm // 2011 year prod. // Control Panel TEC-2TS
Key data: 63 mm, 1750 1/min
double extruder Theysohn CON 63 with Coextruder CON 40 PCV // 2008 year prod. // Main Drive Power - 37 kW // Control Panel Colour TEC-2TS
Used double conical kneader WP, type: DK 150 -In bakery condition- - for max. 150 kg flour or 240 kg dough - Incl. 3 tank cars Visits and test runs are possible.
screw ø:: 30 mm screw length:: 25D screw speedl:: -- U/min drive power:: 4 kW Condition: second-hand Specification: Co-extruder, plastic extruder, type 30-25D as good as new, unused, - Screw diameter: 30 mm - Screw length: 25D - Output approx.: 12–18 kg/h - Raw material: Soft PVC/PE/PP/TPE/TPV (in granule form) - Application: Sealing profiles - DC motor power: 4 kW - Extruder zones: 5 (3 on the barrel, 2 on the die head) - Extruder height: 900–1200 mm - Die head connection: Flange connection - Further details are provided in the annex to the quotation. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 380 mm
Max. cutting length: 4,500 mm Max. saw blade diameter: 380 mm Manual positioning of the sawing unit with digital length display Cutting area at 90°: 195 x 120 mm Cutting area at 45°: 135 x 120 mm Minimum quantity spraying device Pneumatic material tensioners Mitre cuts possible on both sides 2-hand operation
TECHNICAL DATA: Working dimensions: max. 1300 x 100 x 60 mm 02 Milling axes Milling cutter axis: Ø 30 mm Usable height of the milling cutter: max. 80 mm Speed: 7000 rpm 03 vertical drilling units 01 Mortising machine Equipped with automatic feeder Installed power: 13 kW
TECHNICAL DATA: Working length: min. 200 mm – max. 1500 mm Working width: min. 30 mm – max. 110 mm Working thickness: min. 10 mm – max. 60 mm Saw blade: max. Ø 400 mm Sawing unit: 6 kW (2 x 3 kW) Installed power: 11 kW INCLUDED IN DELIVERY: 01 Waste conveyor belt
Pressure total: 100 ton Daylight: 1.400 mm Table surface area : 1.300 x 1.000 mm Slide area: 1.300 x 1.000 mm Ejector Force: 35 kN max. capacity of swivelling ram plate: 40 kN Die Weight on table max.: 80 kN max. capacity of tilting table: 50 kN Oil volume: 200 l Required power: 10 kW Dimensions L x W x H: 3.95 x 2.3 x 4.5 m Distance between the columns F - B: 1.050 mm Weight of machine approx.: 10 ton
pressure: 500 t distance between columns: 1600 mm stroke: 60 mm max. ram stroke: 60 1 / min ram adjustment: 100 mm dayligth: 700 mm Table area: 1600x1400 mm ram surface: 1400x1150 mm total power requirement: kW weight of the machine ca.: 40 t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the ...
pressure: 630 KN distance between columns: 800 mm stroke: 150 mm table surface area: 720x550 mm ram surface: 720x520 mm dayligth: 420 mm rapid drop speed: 394 mm/sec working feed: 71/17 mm/sec return speed: 390 mm/sec adjustment movement of the stroke: 120 mm total power requirement: 15 kW weight of the machine ca.: t dimensions of the machine ca.: m Cutting impact dampening The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look ...
pressure: 100 t passage width: . mm stroke: . mm tracking travel: 45 mm safety distance: 208 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Follow-up time 149 sec The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 t passage width: 1000 mm stroke: 700 mm width: 800 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding wheel diameter: 300 mm no. of working stations: 2 Stück speeds: 1915/2500 U/min dimensions of the machine ca.: 550x500x1200 mmxmmxmm weight: 220 kg With coolant system More details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 25 t, 1000 mm, 400 mm
Piston press – 25 t – 1,000 × 600 mm For sale is a hydraulic lower piston press from the manufacturer DURENDUS with a maximum pressing force of 25 t. The machine has a table size of 1,000 × 600 mm, a maximum installation height of 600 mm and a stroke of 400 mm, making it suitable for assembly, straightening, press-fitting and forming work in industrial use. Technical data + information: Piston press – 25 t – 1,000 × 600 mm General information - Reference ID: DE-2026-HB-227-01 - Type: 4-column lower piston press - Manufacturer: DURENDUS - Press force: 25 T (adjustable) - Table size: 1,000 × 600 mm - Max. installation height: 600 mm - Working height: 1,000 mm - Total height: approx. 1,850 mm - Total width: approx. 1,750 mm - Total depth: approx. 1,200 mm - Total weight: approx. 2,000 kg Hydraulic cylinders - Stroke: 400 mm - Cylinder diameter: Ø 1 ...
: neu : ca. 2 - 4 Wochen ab Auftr : 4852.45 € : 250 x 40 x 51 mm : 1300 x 75 mm : 1,4 kW : 1400 1/min : 15 m/s : 42 mm : 600 mm : 540 mm : 1190 mm : 1200 x 800 x 1000 mm : 70 kg With base frame, integrated suction and brake High performance Belt grinding device height adjustable 0-90°. Maximum usable face grinding area Belt adjustment with fine adjustment Longitudinal stop for material guide Perfectly balanced and low vibration Connection on both sides for dust extraction Ø 50 mm Motor protection switch with undervoltage release Fixed stop 1 Sanding belt standard (brown), grit 80 1 grinding wheel 250 x 40 x 51 mm, grit 80 Spark protection Connection cable with CEE plug ALTERNATIVES: Version without suction (Art. 330.365) Version without stand, suction and brake (Art. 330.360) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Technical data Manufacturer / model: C.M.E. S.r.l., Ideal I360 / type 1360 Serial number / year: 03401 / 2010 Flow rate / operating pressure: 36 m³/h at 3 bar Maximum pressure: 4 bar Motor power / speed: 5.5 kW / 2,900 rpm Dimensions (L × W × H): 1,350 × 730 × 960 mm Weight: approx. 325 kg Connections: DIN 65 according to DIN 11851 Product-contact materials: AISI 316 stainless steel and NBR elastomers Suitable media: wine, destemmed grapes, must, vinegar, oil, juices, and fruit/vegetable pulp Maximum fluid temperature: approx. 70 °C Performance curves: not available Spare parts: see the operating and maintenance manual with spare-parts catalogue Machine-specific operating data according to C.M.E., dimensions according to the Ideal 360” manual.
Double wall production, 2 folding pallets, Fabr. Swinging hammer, = for production, e.g. for double walls, production dimensions: 1 x 12.50 x 3.10 m - 1x 12.50 x 3.58, Steel decking flat and level - incl. vibrator - incl. control - incl. converter
Key data: 163 t
Hydraulic 4-column press – 163 T – 2,000 × 1,400 mm For sale is a hydraulic 4-column press from the manufacturer HYMAG with a maximum pressing force of 163 t. The machine has a table size of 2,000 × 1,400 mm, an open height of 1,300 mm and a stroke of 700 mm, making it suitable for forming, straightening, pressing, press-fitting and assembly work in industrial use. Technical data + information: Hydraulic 4-column press – 163 T – 2,000 × 1,400 mm General information - Manufacturer: HYMAG - Type: Hydraulic 4-column press - Model: HS 4 160-K3 - Machine number: 1606.18 - Year of construction: 2015 - Press force: 163 t - Nominal force: 1,600 kN - Table size (usable area): 2,000 × 1,400 mm - Plunger plate size: 2,000 × 1,400 mm - Table height: 800 mm - Open height: 1,300 mm - Stroke: 700 mm - Front passage: 2,010 mm - Side passage: 900 mm - Total height ...
Type: KM 80 ADoppel Z-kneaderDrive: 11 KW at 30/23 rpmArea in contact with the product: stainless steelNet capacity: 80 L Robust industrial designSuitable for highly viscous and paste-like productsEasy loading and emptying (depending on the version)
Vertical Two-Spindle Turning Center - Control Siemens 840 D - Machine bed VSC 400 Duo - 2 x disc turret 12 x dia 40 mm, driven - 2 x additional drilling and countersinking station - Open workpiece transport system - Transfer and turning unit - Interface to an external handling system - Central cooling center supply high-pressure pump 70 bar - Blowing off the pick-up device and the clamping devices - Workpiece measurement - Tool monitoring - Emag network option - Sister tool management Circumferential diameter 260 mm x-travel 860 mm z-travel 200 mm Main spindle 2 max. speed up to 4500 1/min Spindle spacing 1055 mm Main Drive 2 AC Asynchronous Motor 6ß/100% ED 39/28 KW Maximum torque 460 Nm Rapid traverse x/ z 45/ 30 m/min
grinding wheel diameter: 300 mm no. of working stations: 2 Stück total power requirement: 0.75 kW weight of the machine ca.: 0.2 t With dust exhauster More details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding wheel diameter: 300 mm no. of working stations: 2 Stück total power requirement: 1,1 kW weight of the machine ca.: 0.2 t 1x Cup wheel diameter 300mm 1x tangential wheel 260x50mm Drill sharpening device More details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
work table:: 290x130 mm table - tiltable +/-: 15 ° cross adjustment: grinding wheel diameter: 150 mm turning speeds:: 1 dimensions of the machine ca.: 780X630X1100 mmxmmxmm weight of the machine ca.: 185 kg coolant: komplett The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding wheel diameter: 400 mm no. of working stations: 1 Stück total power requirement: 1,7 kW weight of the machine ca.: 0.4 t With coolant system More details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Rema DMGB-35 double cross-cut saw, including an outfeed conveyor belt, for cross-cutting timber on both sides. This machine was specifically used for cutting doors to size. In its current condition, the cutting length is limited to 1,000 mm, but this can be extended. Technical data: Belt length: approx. 1,700 mm + 2,700 mm Cutting width: max. 2,500 mm Cutting height: max. approx. 80 mm Condition: Gebraucht Location: Unbekannt, Belgium
pressure: 600 t ram surface: 3600 x 2500 mm stroke: 350 mm Control: Siemens S 7 no. of strokes: 11 - 44 Hub/min table surface area: 3600 x 2500 mm ram adjustment: 400 mm material width: 500 - 1950 mm material thickness: 0,6 - 2,5 mm mm coil weight: 35 t coil external diameter: 900 - 1900 mm coil internal diameter: 610 mm no. of straightening rolls: 13 straightening roll diameter: 50 mm Stack height: 400 mm stations: 2 total power requirement: kW weight of the machine ca.: 390 t dimensions of the machine ca.: m with reel, Rstraight out Unit, (conveyor system Schleicher) and stacking unit(NSM) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 40 t distance between columns: 495 mm stroke: 150 mm distance table/ram, max. stroke up, adjustment up: 300 mm table surface area: 490 x 400 mm hole in the table: 50 mm table height over floor: 950 mm column travel -side: 155 mm ram surface: 150 mm feed down: 480 mm/sec feed up: 480 mm/sec working feed: 20 mm/sec oil volume: 115 l power capacity: 7,5 kW weight: 2,2 t dimensions of the machine ca.: 1,35 x 1,00 x 2,21 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 800 t distance between columns: 3550 mm stroke: 1100 mm distance table/ram, max. stroke up, adjustment up: 1900 mm table surface area: 3500 x 1800 mm die-cushion pressure inside the table: 350 t stroke of drawing cushion in table: 295 mm die-cushion pressure in pusher: 80 t stroke of drawing cushion in pusher: 160 mm ram surface: 3500 x 1800 mm die-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled sliding table: without rails for travel total power requirement: kW weight of the machine ca.: 265 t dimensions of the machine ca.: m overhauled in 1998 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 600 t distance between columns: 2600 mm stroke: 900 mm distance table/blankh.,max. stroke up,adjustm. up: 1600 mm table surface area: 2500 x 1730 mm die-cushion pressure inside the table: 250 t stroke of drawing cushion in table: 400 mm die-cushion pressure in pusher: 63 t stroke of drawing cushion in pusher: 150 mm ram surface: 2500 x 1730 mm column travel -side: 1100 mm die-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m overhauled in 2005 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 800 t distance between columns: 2560 mm stroke: 1050 mm control: Siemens S5 distance table/blankh.,max. stroke up,adjustm. up: 1870 mm table surface area: 2500 x 1730 mm die-cushion pressure inside the table: 300 t stroke of drawing cushion in table: 395 mm die-cushion pressure in pusher: 63 t stroke of drawing cushion in pusher: 150 mm ram surface: 200 mm die-cushion in pusher: hydraulic, controlled die-cushion inside the table: hydraulic, controlled total power requirement: 200 kW weight of the machine ca.: 150 t dimensions of the machine ca.: 4,95 x 3,3 x 10,2 m overhauled in 2005 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 1600 t distance between columns: 3160 mm ram stroke: 1450 mm distance table/blankh.,max. stroke up,adjustm. up: 2250 mm table surface area: 4000 x 2200 mm ram pressure: 1000 t pressure of blank holder: 600 t stroke of blankholder at the bottom: 1000 mm stroke of blankholder with adjustment 0-100 mm: 1450 mm blank holder size: 4000 x 2200 mm die-cushion pressure inside the table: 360 t stroke of drawing cushion in table: 275 / 400 mm ram surface: 4000 x 2200 mm column travel -side: 1100 mm die-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled oil volume: 9000 l total power requirement: 390 kW weight of the machine ca.: 250 t dimensions of the machine ca.: 6,0 x 4,3 x 10,5 m Head press (1600 tons) of a press line with five subsequent presses (800 tons) The data for this ad was created with ModulMWS - the software solution of LogoTech o ...
pressure: 500 t distance between columns: 1220 mm max. ram stroke: 600 mm distance table/ram, max. stroke up, adjustment up: 1000 mm table surface area: 1600 x 1200 mm die-cushion pressure inside the table: 320 t stroke of drawing cushion in table: 150 mm drawing cushion surface in table: 750 x 812 mm die-cushion pressure in pusher: 180 t stroke of drawing cushion in pusher: 100 mm drawing cushion surface in pusher: 750 x 625 mm ram surface: 1600 x 1200 mm table height over floor: 800 mm feed down: 665 mm/sec feed up: 530 mm/sec working feed: 34 - 100 mm/sec quantity of oil: 2000 l power capacity: 180 kW weight: 40 t dimensions of the machine ca.: 3,2 x 2,4 x 7,5 m by using oil-hydraulic drive, hydraulic and electric control UVV, die cushion in bed and slide, adjustable drawing speed, punching limit with damping plunger lock, electric cabinet Our list price is WITHOUT starting the machin ...
max. dia. of grinding wheel: 200 mm : 40 mm turning speeds: 1400/2800 U/min voltage: 380 V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
rotary table dia.: mm max. dia. of grinding wheel: mm with manual ongoing: 0 manually feed: 0 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 63 t distance between columns: 680 mm stroke: 150 mm total power requirement: 15 kW weight of the machine ca.: 7 t dimensions of the machine ca.: 3 x 3 x 3 m No. 0214 ydraulic high-speed double-column press SMG DS 63 Clearance between the uprights 680 mm, max. distance between table top and ram 385 mm, Ejector force 15kN, largest ram stroke 150 mm. Working area: Table surface 660 x 460 Drive: 15 kW pressing force 630 kN, retraction force 51 kN The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 2 - 4 Wochen ab Auftr : 4533.22 € : 300 x 40 x 51 mm : 2,2 kW : 1250 1/min : 42 mm : 540 mm : 530 mm : 1180 mm : 800 x 600 x 1400 mm : 90 kg With machine stand, integrated suction, emergency stop pushbutton and brake (Art.317.779) Quiet running, maintenance-free motor Laterally closed protective hoods Stable, adjustable workpiece supports High safety comfort due to adjustable spark deflectors Suitable for grinding, deburring and sharpening all kinds of tools, metal profiles, etc. Motor circuit breaker and undervoltage release Spark/eye protection on both sides Connection cable with CEE plug 16 A 1 grinding wheel each coarse and fine ALTERNATIVE: Version without suction (Art. 317.776) Version without stand, suction and brake/emergancy push button (Art. 317.764) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 2 - 4 Wochen ab Auftr : Deutschland : 956.67 € : 200 x 32 x 32 mm : 1 kW : 2800 1/min : 42 mm : 250 mm : 470 mm : 230 mm : 325 x 540 x 310 mm Quiet running, maintenance-free motor Laterally closed protective hoods Stable, adjustable workpiece supports High safety comfort due to adjustable spark deflectors Suitable for grinding, deburring and sharpening all kinds of tools, metal profiles, etc. Motor circuit breaker and undervoltage release Spark/eye protection on both sides Connection cable with CEE plug 16 A 1 grinding wheel each coarse and fine 12 months warranty for single shift operation Art.Nr.: 317.762 table version ALTERNATIVE VERSIONS: Art.Nr.: 317.774with machine stand, emergency stop buttom and brake Art.Nr.: 317.777 with MA400D integrated extractor, machine stand, emergency stop buttom and brake The data for this ad was created with ModulMWS - the software soluti ...
: neu : ca. 2 - 4 Wochen ab Auftr : Deutschland : 1896.69 € : 200 x 32 x 32 mm : 1 kW : 2550 1/min : 42 mm : 270 mm : 470 mm : 1050 mm : 600x800x1350 mm : 60 kg Quiet running, maintenance-free motor Laterally closed protective hoods Stable, adjustable workpiece supports High safety comfort due to adjustable spark deflectors Suitable for grinding, deburring and sharpening all kinds of tools, metal profiles, etc. Motor circuit breaker and undervoltage release Spark/eye protection on both sides Connection cable with CEE plug 16 A 1 grinding wheel each coarse and fine 12 months warranty for single shift operation Art.Nr.: 317.774with machine stand, emergency stop pushbutton and brake OPTION (price on request): Footpedal as emergency stop ALTERNATIV MODELS: Art.Nr.: 317.762 table version Art.Nr.: 317.777 with machine stand with integrated suction, emergency stop pushbutton and brake The da ...
new
: neu : 2025 : 050141 : prompt, Zwischenverkauf v : Polen : 2821.24 € : 1 : 200 x 32 x 32 mm : 1 kW : 2800 1/min : 42 mm : 470 mm : 250 mm : 1050 mm : 60 kg Quiet running, maintenance-free motor Laterally closed protective hoods Stable, adjustable workpiece supports High safety comfort due to adjustable spark deflectors Suitable for grinding, deburring and sharpening all kinds of tools, metal profiles, etc. Motor circuit breaker and undervoltage release Spark/eye protection on both sides Connection cable with CEE plug 16 A 1 grinding wheel each coarse and fine ALTERNATIVES: Version without suction (Art. 317.762) Version without stand, suction and brake/emergancy push button (Art. 317.774) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
IFANGER F 300 ist eine Bandschleifmaschine mit einseitiger Schleifscheibe, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Bearbeitungsdaten: Schleifscheibe Ø 300 mm, Breite 25 mm, Bohrung 25 mm. Technische Hauptdaten: 2 Drehzahlstufen von 1650 bis 2160 t/min; Anschluss 50 Hz, 3x 380 V; Leistung 0,73 kW; Maschinengewicht ca. 170 kg; Abmessungen L600 × B600 × H1300 mm. Keine speziellen Zusatzausrüstungen angegeben. Eignet sich zur Erzielung enger Toleranzen; typische Einsatzbereiche sind Automotive, Uhrmacherei, Werkzeugmaschinenbau, Luftfahrt und Medizintechnik Technische Daten ohne Gewähr
MURATEC MT 100 ist eine CNC-Doppelspindel-Drehmaschine, ausgelegt für hochpräzise Bearbeitung, hohe Genauigkeit und Zuverlässigkeit. Kapazitäten: Drehdurchmesser 190 mm, Stangendurchmesser Ø51 mm, 2 Spindeln, 2 Revolver mit je 15 Positionen, angetriebene Werkzeuge 6000 rpm. Achsen: X 150 mm, Y ±30 mm, Z 620 mm. Technische Daten: Spindeldrehzahl 0–6000 rpm (stufenlos), Gegenspindel 6000 rpm, Weg 680 mm, Spindelmotor 11/7,5 kW, Eilgang X24 Z40 Y12 m/min, Anschluss 3x400 V 50 Hz, Gewicht ~8000 kg, Abmessungen 4120×2130×2815 mm. Zubehör: Spannzangensatz HAINBUCH SK52BZIG, Ölnebelabsaugung FILTERMIST FX4002, LNS Lademagazin ALPHA SL65 S. Erreicht enge Toleranzen; geeignet für Automotive, Luftfahrt, Medizintechnik und Präzisionskomponenten. Technische Daten ohne Gewähr
VITAX Meuleuse Nr. 38 ist eine Doppelschleifmaschine, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit bei Doppel-Schleifprozessen. Angaben zu Arbeitskapazitäten (Durchmesser, Längen, Verfahrwege, Werkstückmaße) liegen nicht vor. Technische Details (Spindeldrehzahlen, Vorschübe, Stromversorgung, Abmessungen, Gewicht) sind nicht angegeben. Sie ermöglicht enge Toleranzen und eignet sich für Branchen wie Automotive, Luftfahrt, Uhrmacherei, Medizintechnik und Werkzeugmaschinenbau. Technische Daten ohne Gewähr
maximum number of results exceeded
please refine your search
