double mitre saw used for sale

faceplate diameter: 2500 mm swing diameter: 2700 mm turning height: 1600 mm turning speed range - milling: 1,18 - 32,5 U/min turning speed range - milling: 4,25 - 117 U/min workpiece weight: 10000 kg side head - cross travel: 800 mm ram head - cross travel: 45 degrees - 1000 mm ram head - cross travel: 30 degrees - 1000 mm total power requirement: 80 kW weight of the machine ca.: t dimensions of the machine ca.: m 2-Axis D.R.O. 5 positions turret The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pressure total: 2000 ton Ram stroke: 900 mm Slide adjustment: 800 mm Shut height (stroke down, adjustment up): 1800 mm Free frontal opening L-R: 5040 mm Distance between oil tray: 4840 mm Distance between the columns F - B: 2600 x 2400 mm Table surface area : 5000 x 2700 mm Slide area: 5000 x 2700 mm Die cushion capacity in table: 400 ton Die cushion stroke: 350 mm Die cushion pad area: 4200 x 2100 mm Cushion pressure in ram: 200 ton Ejector stroke in ram: 200 mm Number of strokes: 8 - 14 s.p.m. Required power: 350 kW Height over floor approx.: 11350 mm Die weight at the ram max.: 40000 kg Die Weight total: 80000 kg Weight of machine approx.: 580 ton

Pressure total: 2000 ton Ram stroke: 900 mm Slide adjustment: 800 mm Shut height (stroke down, adjustment up): 1800 mm Free frontal opening L-R: 5040 mm Distance between oil tray: 4840 mm Distance between the columns F - B: 2600 x 2400 mm Table surface area : 5000 x 2700 mm Slide area: 5000 x 2700 mm Die cushion capacity in table: 400 ton Die cushion stroke: 350 mm Die cushion pad area: 4200 x 2100 mm Cushion pressure in ram: 200 ton Ejector stroke in ram: 200 mm Number of strokes: 8 - 14 s.p.m. Required power: 350 kW Height over floor approx.: 11350 mm Die weight at the ram max.: 40000 kg Die Weight total: 80000 kg Weight of machine approx.: 580 ton

Pressure total: 630 ton Stroke: 900 mm Daylight: 1550 mm Table surface area : 2500 x 1730 mm Slide area: 2500 x 1730 mm Die cushion capacity in table: 230 ton Die cushion stroke: 400 mm Die cushion pad area: 2150 x 1540 mm Approach speed: mm / sec Working speed: mm / sec Return speed: mm / sec Oil volume: 2000 l Required power: kW Weight of machine approx.: 200 ton

Pressure total: 1200 ton Ram stroke: 600 mm Slide adjustment: 600 mm Shut height (stroke down, adjustment up): 1600 mm Free frontal opening L-R: 4550 mm Table surface area : 4500 x 2700 mm Slide area: 4500 x 2700 mm Die cushion capacity in table: 225 ton Die cushion stroke: 200 mm Number of strokes: 9 s.p.m. Height over floor approx.: 9000 mm Weight of machine approx.: 344 ton

Pressure total: 1200 ton Ram stroke: 600 mm Slide adjustment: 500 mm Shut height (stroke down, adjustment up): 1250 mm Free frontal opening L-R: 3550 mm Table surface area : 3500 x 2700 mm Slide area: 3500 x 2700 mm Die cushion capacity in table: 240 ton Die cushion stroke: 250 mm Ejector in ram: 95 ton Ejector stroke in ram: 150 Number of strokes: 10 - 16 s.p.m. Height over floor approx.: 9000 mm Weight of machine approx.: 280 ton

Pressure total: 2500 ton Stroke: 1700 mm Daylight: 2200 mm Free frontal opening L-R: 5100 mm Table surface area : 5000 x 2500 mm Slide area: 5000 x 2500 mm Die cushion capacity in table: 650 ton Die cushion stroke: 0 - 200 mm Die cushion pad area: 4260 x 2150 mm Max. die size: 5000 x 2500 x 1600 mm Ejector in ram: 65 ton Ejector stroke in ram: 200 mm Approach speed: 380 mm / sec Working speed: 200 mm / sec Return speed: 300 mm / sec Die weight at the ram max.: 30 ton Die Weight total: 60 ton Oil volume: 6000 l Required power: 2 x 230 kW Height over floor approx.: 9700 mm Weight of machine approx.: 533 ton

diameter range 4-8 mm shaft length under head 165 mm cutting length 200 mm output pieces/min 100

diameter range 6 mm shaft length under head 145 mm cutting length 165 mm output - pieces/min 100

diameter range 6,35 mm shaft length under head 70 mm cutting length 95 mm output pieces/min 300

diameter range 2-4,76 mm shaft length under head 46 mm max. cut-off length 60 mm output pieces/min 470

diameter range 2-5 mm shaft length under head 25 mm max. cutting length 37 mm output- piece/min 330

diameter range 4-8mm shaft length under head 40mm max. cut-off length 71mm output pieces/min 250 press power 30 t

diameter range 3-6,5mm shaft length under head 8-75 mm max. cut-off length 100 mm output pieces/min 150

bushing cut-off diameter range 6 mm cutting length 95 mm shaft length under head 75 mm output - pieces/min 200

bushing cut-off diameter range 1-4mm shaft length under head 25 mm max. cutting length 32 mm output- piece/min 350

diameter range 5,0-10 mm shaft length under head 120 mm max. cutting length 170 mm output- piece/min 130

diameter range 6 mm shaft length under head 50 mm max. cut-off length 75 mm output - pieces/min 300

diameter range 5-10 mm shaft length under head 10-150 mm max. cut-off length 180 mm output pieces/min 100

diameter range 6-12 mm shaft length under head 120 mm max. cut-off length 160 mm output pieces/min 125

diameter range 3-6 mm shaft length under head 6-60 mm max. cutting length 75 mm output- piece/min 180

bushing cut-off diameter range 1-4mm shaft length under head 25 mm max. cutting length 32 mm output- piece/min 350

diameter range 4-8 mm shaft length under head 8-80 mm max. cut-off length 110 mm output pieces/min 140

diameter range 3-6 mm shaft length under head 35-120 mm max. cutting length 146 mm output- piece/min 90

diameter range 4-9 mm shaft length under head 100 mm cutting length 120 mm output pieces/min 100

diameter range 2-4 mm shaft length under head 100 mm max. cutting length 117 mm output- piece/min 110

bushing cut-off diameter range 5 mm cutting length 50 mm shaft length under head 40 mm output - pieces/min 450

diameter range 8-16 mm shaft length under head 25-180 mm max. cut-off length 220 mm output - pieces/min 70

diameter range 2-5,2 mm shaft length under head 120 mm cutting length 146 mm output pieces/min 105

good condition diameter range 10-20 mm shaft length under head 180 mm cutting length 230 mm output - pieces/min 45/50/56/63 press power 160 t plane of stroke 240 mm

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Manufacturer: VEB, Double grinding wheel type SE 2x315/1 -Grinding wheel: max. Ø 315 mm -Peripheral speed: 45 m/s -Motor power: 1.0 kW -Operating voltage: 380 volts -Accessories: incl. grinding wheel dresser, see photos -Dimensions: 640/890/H1070 mm -Weight: 248 kg

Hydraulic pump, oil pump, gear pump, vane pump, hydraulic power unit, double hydraulic pump -Double hydraulic pump: from Battenfeld BA-T2400 injection molding machine -Drive: Siemens type 1LA6 207 30 kW 1465 rpm -Flow rate: l/min -Valves: Voith type DBV40 E25 FYM320 24 / DBV20 E25 FYM320 24 -Filter unit: Hydac -Operating pressure: bar -Dimensions: 1275/620/H500 mm -Weight: 322 kg

Hydraulic pump, oil pump, gear pump, vane pump, hydraulic power unit, double hydraulic pump -Double hydraulic pump: from KHS Krauss Maffei KM 1000-5000A injection molding machine -Pump 1: Voith type IPH 6/5-125/50 300 bar -Pump 2: Voith type IPR/H 6/5-125/40 210/300 bar -Drive: Loher 75 kW 1500 rpm -Individual components: filters/valves, see photos -Dimensions: 2285/800/H900 mm -Weight: 1132 kg

Hydraulic Pump, Oil Pump, Gear Pump, Injection Molding Machine, Injection Molding Machine, Plastic Injection Molding Machine, Plastic Injection Molding Machine, Plastic Injection Molding Press -Manufacturer: ORSTA -double pump -Pump 1: type A16R -Pump 2: type C16-3R -Drive: VEM type KMR132M4 -Power: 11 kW 1440 rpm -with clutch bell -Number: 3x hydraulic pumps available -Price: per piece -Dimensions: 830/285/H335 mm -Weight: 105 kg

Scissor lift table, scissor lift table, scissor lift table, scissor lift, scissor lift, double scissor lift table -Drive for lifting via: 240 volt electric hydraulic pump -Payload: 400 kg -Platform: 700 x 600 mm -Height retracted: 330 mm (without wheels 210 mm) -Height extended: 1140 mm -Max. Stroke: 810 mm -Number: 1x lifting platforms available -Price: per piece -Transport dimensions: 800/600/H330 mm -Own weight: 128 kg

double grinder, double grinder, column grinder, column grinder, drill grinder -Double grinder with: water cooling -Grinding disc: max. Ø 450 x 63 mm -Speed: 950 rpm -Engine power: 3.3 kW -Operating voltage: 380 volts -Quantity: 2 pieces available -Price: per piece -Dimensions: 370/370/H1090 mm -Weight: 404 kg

Pneumatic double diaphragm pump -Fast venting and immediate suction of the medium -Dry running without: damage -Hermetically sealed for: moisture-sensitive liquids -Excellent for: abrasive liquids with low to medium viscosity and materials sensitive to shear forces: -Air max. Pressure: bar -Air connection: 1 inch -Water output: l/min -Water max. Pressure: bar -Connection: B coupling -Dimensions: 480/400/H530 mm -Weight: 32 kg

Frequency converter, frequency converter, drive converter, controller, variable speed drive -Siemens: Sinamics Active Line Module 6SL3130-7TE23-6AA3 -Max. Power: 36 kW -Input 3 AC 380-480 V 50/60 Hz -Output DC 600 V 60 A 36 kW -Siemens: Sinamics Double Motor Module 6SL3120-2TE21-0AA3 -Input: DC 600 V -Output: 3 AC 400 V 9 A/9 A -Dimensions: 200/490/H270 mm -Weight: 16 kg

Cantilever racking, heavy-duty racking -without insert trays: none available -Double-sided -consisting of: -Shelf: with 3 uprights each, height 5.4 m -Support arms, double-sided: 500 mm long -Brack load capacity: 795 kg -Load capacity per side: max. 7000 kg -screwed -Number: 4 shelves available -Price: per piece -Empty weight: 1250 kg/piece

Frequency converters, frequency converters, drive converters, controllers, variable speed drives, single motor modules, double motor modules -Manufacturer: Siemens, Sinamics Double Motor Module -Type: 6SL3120-2TE13-0AAO Version A -Input: DC 600V -Output: 3AC 400V 3A/3A -Dimensions: 480/50/H270 mm -Weight: 5.5 kg

Hydraulic power unit, hydraulic pump, universal power unit, gear pump, double hydraulic pump -Manufacturer: Orsta, Double hydraulic pump -Pump 1: Type A 16 R -Pump 2: Type C16-3R -Motor: VEM 11 kW / 1440 rpm -Number: 2x hydraulic power units available -Price: per piece -Dimensions: 840/270/H335 mm -Weight: 107 kg/unit

Guide cylinders, guide pneumatic cylinders, pneumatic cylinders, compact cylinders, air cylinders, standard cylinders, clamping cylinders, short-stroke cylinders, flat cylinders, double-piston cylinders -Manufacturer: Festo, double piston cylinder type DPZ-16-25P-A-KF -Stroke: 20mm -Piston: Ø 16 mm -Piston rod: Ø 8 mm -Damping: pneumatic, adjustable on both sides -Dimension: 130/23/H60 mm -Weight 0.5 kg

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Manufacturer: Schwabe, double grinding wheel type EK4/4 -Grinding wheel: max. Ø 400 mm / Actual Ø 360 mm -Speed: 1400 rpm -Operating voltage: 380/660 volts -Motor power: 3 kW -Dimensions: 1320/930/H1450 mm -Weight: approx. 500 kg

Double bench grinder, double grinder, bench grinder, bench grinder -Manufacturer: Rema, double bench grinder type DS 12/200 A with sanding dust extraction -Grinding discs: max. Ø 200 x 32 mm -Motor power: 0.9 kW -Speed: 2900 rpm -Operating voltage: 220/380 volts -Dimensions: 480/450/H1060 mm -Weight: 143 kg with pallet

Double bench grinder, double grinder, bench grinder, bench grinder -Manufacturer: ESB, double bench grinder type DS 200 -Grinding discs: max. Ø 200 x 32 x 32 mm -Motor power: 0.9 kW -Speed: 3000 rpm -Receptacle: Shaft Ø 20 x 33 mm, see photos -Operating voltage: 220/380 volts -Dimensions: 490/195/H220 mm -Weight: 15 kg

Hydraulic pump, oil pump, gear pump, vane pump, hydraulic unit, double hydraulic pump, radial piston pump -Double hydraulic pump: radial piston pump with clutch -Pump: unfortunately no exact type designation -Part No.: A3918 2 515 105 780 -Clutch: Kupplungstechnik Rheine PL 350/15/ -Dimensions: see photo technical. drawing -Dimensions: 730/470/H470 mm -Weight: 164 kg

Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station -Manufacturer: HAWE, hydraulic unit with double pump -Hydraulic pumps: type IPC5-40 / IPC6-30 -Pressure: up to 250 bar -Flow rate: /min -Engine: Loher KNGA250SB-04Z 75 kW -Individual components: see photos -Dimensions: 2300/800/H9500 mm -Weight: 1000 kg

Flange connection, V-flange, Sleeves, double nipples -Sleeves/double nipples: 1 to 3 183 pieces -Type: 20 different versions, see photos/parts list -Price/tax: complete -Stock: other sizes/types also available, please inquire -Transport dimensions: 1200/800/H350 mm -Weight: 183 kg

Cantilever rack, heavy duty rack -Manufacturer: Gemac, cantilever rack base field double-sided -Cantilevers: 5 per side -Compartment height: 33 cm -perm. Load: 200 kg per cantilever arm / 1000 kg total. see nameplate -Quantity: 12x shelves available -Price per piece -Dimension: 1315/1210/H2000 mm -Weight: 98 kg/piece

Cantilever rack, heavy-duty rack -Cantilever rack: base field double-sided, 2 uprights -Cantilever arms: 4 per side, length 500 mm -Compartment height: variably adjustable -Quantity: 2x shelves available -Price per piece -Dimensions: 1180/1195/H2960 mm -Weight: 139kg / 140kg