double end tenoner used for sale

Capacity 2.7T /6000 lbs. Stroke 1403 mm weight 77.5t

Equipment: Insulation, agitator,Manufacturer: Thrun Maschinen- und Behälterbau,Condition: used,Volume: 113,000,Design: upright,Stand form: Stand frame,Insulation: available,Insulating jacket: hermetically welded,Insulation material: PU foam,Material insulation jacket: stainless steel,Diameter inside: 3,750,Cylindrical height: 11,700,Total height: 13,000,Technical documents: Drawing,Manhole / dome: in the cylinder,Type plate: No,Equipment: Ventilation/ventilation, spray head, crane eyelets, Outlet: available,outlet : 80,last use: foodstuffs,agitator: propeller,bottom bearing:

Equipment: Insulation, agitator,Manufacturer: Ahlborn,Condition: used,Volume: 110,000,Lower floor: flat floor with slope,Design: upright,Standing form: Stand frame,Insulation: available,Insulating jacket: hermetically welded,Material insulating jacket: Stainless steel,Diameter inside: 3,484,Cylindrical height: 13,330,Total height: 14,550,Manhole / dome: in cylinder,Type plate: Yes,Equipment: Ventilation/ventilation, crane eyelets,Remarks: Ladder included,Last purpose: Foodstuffs,Material in contact with the product: V2A 1.4301 (AISI304),Agitator: Propeller,Bottom bearing: No,Current interferer:

- Dual-stream mill for fine wood chip production with segmented internal grinding elements. - Main motor power 315 KW. - Equipped with PALLMANN CLEANOMAT system (installed according to documentation in 2009). - Upper feed hopper with vibratory system and magnet for separation of metal elements. - Stripper. - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-43986-14

OMS SALVARANI double miter saw model OK 350 SUPER: - useful opening 3200mm - adjustable blades D=350mm - Total power kw 8.3 , volt 380 - year 1995, machine to CE standards

faceplate diameter: 2500 mm swing diameter: 2700 mm turning height: 1600 mm turning speed range - milling: 1,18 - 32,5 U/min turning speed range - milling: 4,25 - 117 U/min workpiece weight: 10000 kg side head - cross travel: 800 mm ram head - cross travel: 45 degrees - 1000 mm ram head - cross travel: 30 degrees - 1000 mm total power requirement: 80 kW weight of the machine ca.: t dimensions of the machine ca.: m 2-Axis D.R.O. 5 positions turret The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Double step with rollers 2x3 steps, handrail

Double bench grinder METEOR 320 V, on base frame

Double bench grinder UVR 320 V, disc ø approx. 160 mm

Double step with castors steel/wood 2x3 steps

Double step with castors steel/wood 2x3 steps

Double step with castors steel/wood 2x3 steps

Double step with castors wood/metal 2x2 steps

Double step with castors steel/wood, 2x3 steps

Pressure total: 2000 ton Ram stroke: 900 mm Slide adjustment: 800 mm Shut height (stroke down, adjustment up): 1800 mm Free frontal opening L-R: 5040 mm Distance between oil tray: 4840 mm Distance between the columns F - B: 2600 x 2400 mm Table surface area : 5000 x 2700 mm Slide area: 5000 x 2700 mm Die cushion capacity in table: 400 ton Die cushion stroke: 350 mm Die cushion pad area: 4200 x 2100 mm Cushion pressure in ram: 200 ton Ejector stroke in ram: 200 mm Number of strokes: 8 - 14 s.p.m. Required power: 350 kW Height over floor approx.: 11350 mm Die weight at the ram max.: 40000 kg Die Weight total: 80000 kg Weight of machine approx.: 580 ton

Pressure total: 2000 ton Ram stroke: 900 mm Slide adjustment: 800 mm Shut height (stroke down, adjustment up): 1800 mm Free frontal opening L-R: 5040 mm Distance between oil tray: 4840 mm Distance between the columns F - B: 2600 x 2400 mm Table surface area : 5000 x 2700 mm Slide area: 5000 x 2700 mm Die cushion capacity in table: 400 ton Die cushion stroke: 350 mm Die cushion pad area: 4200 x 2100 mm Cushion pressure in ram: 200 ton Ejector stroke in ram: 200 mm Number of strokes: 8 - 14 s.p.m. Required power: 350 kW Height over floor approx.: 11350 mm Die weight at the ram max.: 40000 kg Die Weight total: 80000 kg Weight of machine approx.: 580 ton

With column Auction-ID: A1-44302-36

Auction-ID: A1-44302-6

Pressure total: 630 ton Stroke: 900 mm Daylight: 1550 mm Table surface area : 2500 x 1730 mm Slide area: 2500 x 1730 mm Die cushion capacity in table: 230 ton Die cushion stroke: 400 mm Die cushion pad area: 2150 x 1540 mm Approach speed: mm / sec Working speed: mm / sec Return speed: mm / sec Oil volume: 2000 l Required power: kW Weight of machine approx.: 200 ton

Pressure total: 2500 ton Stroke: 1700 mm Daylight: 2200 mm Free frontal opening L-R: 5100 mm Table surface area : 5000 x 2500 mm Slide area: 5000 x 2500 mm Die cushion capacity in table: 650 ton Die cushion stroke: 0 - 200 mm Die cushion pad area: 4260 x 2150 mm Max. die size: 5000 x 2500 x 1600 mm Ejector in ram: 65 ton Ejector stroke in ram: 200 mm Approach speed: 380 mm / sec Working speed: 200 mm / sec Return speed: 300 mm / sec Die weight at the ram max.: 30 ton Die Weight total: 60 ton Oil volume: 6000 l Required power: 2 x 230 kW Height over floor approx.: 9700 mm Weight of machine approx.: 533 ton

Pressure total: 1200 ton Ram stroke: 600 mm Slide adjustment: 600 mm Shut height (stroke down, adjustment up): 1600 mm Free frontal opening L-R: 4550 mm Table surface area : 4500 x 2700 mm Slide area: 4500 x 2700 mm Die cushion capacity in table: 225 ton Die cushion stroke: 200 mm Number of strokes: 9 s.p.m. Height over floor approx.: 9000 mm Weight of machine approx.: 344 ton

Pressure total: 1200 ton Ram stroke: 600 mm Slide adjustment: 500 mm Shut height (stroke down, adjustment up): 1250 mm Free frontal opening L-R: 3550 mm Table surface area : 3500 x 2700 mm Slide area: 3500 x 2700 mm Die cushion capacity in table: 240 ton Die cushion stroke: 250 mm Ejector in ram: 95 ton Ejector stroke in ram: 150 Number of strokes: 10 - 16 s.p.m. Height over floor approx.: 9000 mm Weight of machine approx.: 280 ton

Equipment: Vacuum,Condition: Used,Volume: 27.300,Vacuum: 0.6,Max. permissible Operating temperature : 50,Design: upright,Stand shape: feet,Number of feet: 3,Diameter inside: 2,800,Wall thickness shelves: 8,Wall thickness cylinder: 7,Technical documents: Drawing,Manhole / dome: in the cylinder, in the top floor,Type plate: Yes,Outlet: available,Remarks: Wall thickness of the underbody at the upper container 11 mm,Last purpose: Pharmaceutical chemistry,Material in contact with the product: V2A 1.4301 (AISI304),Material feet: Stainless steel,Bottom bearing: No,Current interferer: No, Bottom Bearings: No,Power Interferers: No

diameter range 4-8 mm shaft length under head 165 mm cutting length 200 mm output pieces/min 100

diameter range 6 mm shaft length under head 145 mm cutting length 165 mm output - pieces/min 100

diameter range 6,35 mm shaft length under head 70 mm cutting length 95 mm output pieces/min 300

diameter range 2-4,76 mm shaft length under head 46 mm max. cut-off length 60 mm output pieces/min 470

diameter range 2-5 mm shaft length under head 25 mm max. cutting length 37 mm output- piece/min 330

diameter range 4-8mm shaft length under head 40mm max. cut-off length 71mm output pieces/min 250 press power 30 t

diameter range 3-6,5mm shaft length under head 8-75 mm max. cut-off length 100 mm output pieces/min 150

bushing cut-off diameter range 6 mm cutting length 95 mm shaft length under head 75 mm output - pieces/min 200

bushing cut-off diameter range 1-4mm shaft length under head 25 mm max. cutting length 32 mm output- piece/min 350

diameter range 5,0-10 mm shaft length under head 120 mm max. cutting length 170 mm output- piece/min 130

diameter range 6 mm shaft length under head 50 mm max. cut-off length 75 mm output - pieces/min 300

diameter range 5-10 mm shaft length under head 10-150 mm max. cut-off length 180 mm output pieces/min 100

diameter range 6-12 mm shaft length under head 120 mm max. cut-off length 160 mm output pieces/min 125

diameter range 3-6 mm shaft length under head 6-60 mm max. cutting length 75 mm output- piece/min 180

bushing cut-off diameter range 1-4mm shaft length under head 25 mm max. cutting length 32 mm output- piece/min 350

diameter range 4-8 mm shaft length under head 8-80 mm max. cut-off length 110 mm output pieces/min 140

diameter range 3-6 mm shaft length under head 35-120 mm max. cutting length 146 mm output- piece/min 90

diameter range 4-9 mm shaft length under head 100 mm cutting length 120 mm output pieces/min 100

diameter range 2-4 mm shaft length under head 100 mm max. cutting length 117 mm output- piece/min 110

bushing cut-off diameter range 5 mm cutting length 50 mm shaft length under head 40 mm output - pieces/min 450

diameter range 8-16 mm shaft length under head 25-180 mm max. cut-off length 220 mm output - pieces/min 70

diameter range 2-5,2 mm shaft length under head 120 mm cutting length 146 mm output pieces/min 105

good condition diameter range 10-20 mm shaft length under head 180 mm cutting length 230 mm output - pieces/min 45/50/56/63 press power 160 t plane of stroke 240 mm

Miter saw, saw unit right/left, double miter saw, crosscut and miter saw, double end tenoner -Double miter saw: Saw unit right and left -Saw unit: swivels 45° -Motor: Bauknecht 2.5 kW / 2850 rpm -Saw blade: Ø 420 x 30 mm -Price/Fee: complete -Overall dimensions: 1200/800/H690 mm -Total weight: 234 kg

Manufacturer: Inox Maurer AG,Condition: used,Volume: 25,000,Max. max. Operating temperature : 50,Design: upright,Stand shape: feet,Number of feet: 3,Diameter inside: 2.600,Total height: 5.900,Wall thickness shelves: 6.9,Wall thickness cylinder: 6,Technical documents: Drawing, various documents,Manhole / dome: in the cylinder, in the top floor,Type plate: Yes,Equipment: Crane eyelets,Outlet: available,Note: Manhole cover plated,Remarks: Test truck + 4 bar,Last purpose: Pharmaceutical chemistry,Material in contact with the product: V2A 1.4301 (AISI304),Material Feet: Steel,Bottom Bearings:

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Manufacturer: VEB, Double grinding wheel type SE 2x315/1 -Grinding wheel: max. Ø 315 mm -Peripheral speed: 45 m/s -Motor power: 1.0 kW -Operating voltage: 380 volts -Accessories: incl. grinding wheel dresser, see photos -Dimensions: 640/890/H1070 mm -Weight: 248 kg

Miter saw, saw unit right/left, double miter saw, crosscut and miter saw, double end tenoner -Double miter saw: Saw unit right and left from Rapid DGL / BFA saw-drill-milling machine -Motor: Sky 3.0 kW / 2790 rpm -Saw unit: swivels 45° -Saw blade: Ø 410 mm -Price/Fee: complete -Overall dimensions: 1060/760/H680 mm -Total weight: 240 kg