We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,312 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Double-walled stainless steel tank with heated mixing spiral, electric motor drive from SEW eurodrive, load cell with leg, double bottom spout, viewing hatch, on and with pallet
used
Weighing unit is mounted on a trolley, equipped with 2 scales, 1x Prior/ Siemens digital control system display for 2 scales, (Note: buyer is responsible for disassembly and transport) (note: buyer is responsible for disassembly and transport)
used
table size: L 815 x W 305mm; Adjustable at an angle
used
Pressure total: 80 ton Stroke: 110 mm Daylight: 450 mm Table surface area : 650 x 520 mm Slide area: 560 x 480 mm Die cushion capacity in table: 20 ton Required power: 18,5 kW Dimensions L x W x H: 2000 x 1200 x 3000 mm Weight of machine approx.: 4,8 ton
used
Pressure total: 140 ton Stroke: 800 mm Daylight: 1.004 mm Free frontal opening L-R: 2.060 mm Table surface area : 2.000 x 520 mm Slide area: 2.040 x 520 mm Working speed: 4 -20 mm / sec Rapid travel: 135 mm / sec Return speed: 120 mm / sec Weight of machine approx.: 14 ton Height over floor approx.: 4.810 mm Oil volume: 700 l
used
Pressure total: 315 ton Stroke: 600 mm Daylight: 800 mm Table surface area : 2000 x 1200 mm Slide area: 2000 x 1200 mm Approach speed: 450 mm / sec Working speed: 14 - 40 mm / sec Return speed: 300 mm / sec Table height over floor: 900 mm Oil volume: 2000 l Required power: 75 kW Height over floor approx.: 5000 mm Dimensions L x W x H: 4900 x 3200 x 5000 mm Weight of machine approx.: 45 ton
used
Pressure total: 700 ton Stroke: 600 mm Daylight: 1000 mm Table surface area : 3000 x 1200 mm Slide area: 3000 x 1200 mm Approach speed: 150 mm / sec Working speed: 1 - 10 mm / sec Return speed: 150 mm / sec Die weight at the ram max.: 4000 kg Required power: 65 kW Weight of machine approx.: 62 ton
used
Pressure total: 315 ton Stroke: 1100 mm Daylight: 2200 mm Table surface area : 2500 x 1000 mm Slide area: 2500 x 1000 mm Die weight at the ram max.: 6000 kg Approach speed: 600 mm / sec Working speed: 32 - 230 mm / sec Return speed: 600 mm / sec Required power: 158 kW Weight of machine approx.: 44 ton Height over floor approx.: 6175 mm
used
Pressure total: 1400 ton Stroke: 950 mm Daylight: 2000 mm Table surface area : 3600 x 2500 mm Slide area: 3600 x 2500 mm Die cushion capacity in table: 400 ton Die cushion stroke: 500 mm Die cushion pad area: 3060 x 1860 mm Approach speed: 400 mm / sec Working speed: 40 / 80 mm / sec Return speed: 400 mm / sec Oil volume: 5000 l Required power: 450 kW Weight of machine approx.: 240 ton
used
Pressure total: 280 ton Stroke: 800 mm Daylight: 1.600 mm Table surface area : 2.000 x 1.200 mm Slide area: 2.000 x 1.200 mm Die cushion capacity in table: 65 ton Die cushion stroke: 350 mm Die cushion pad area: 1.705 x 920 mm Approach speed: 15 m / min Working speed: 0,8 - 2,4 m / min Return speed: 8,5 m / min Required power: 2 x 37 kW Height over floor approx.: 4.850 mm Weight of machine approx.: 26 ton
used
Pressure total: 300 ton Stroke: 700 mm Daylight: 1000 mm Table surface area : 2000 x 1000 mm Slide area: 2000 x 1000 mm Weight of machine approx.: 20 ton
used
X-travel: 100mm, z-travel: 220mm, max. rotational speed: 5000/min, number of workpiece positions: 14, max. swing: 348mm, max. turning diameter: 150mm, controls: Mitsubishi M730 UM, operational hours counter: 4635h, with handling and fire extinguishing system.
used
Grinding disk diameter: 600mm, controls: Siemens S7, with documentation, was maintained regularly, an inspection is possible.
used
Main functions: Precision cutting of profiles at various angles. Operating pressure: max. 1MPa, air consumption: 28l/cycle, weight: approx. 2150kg.
used
Swivel range inwards: 90°-45°, saw blade diameter: 500mm, min. cutting length: 400mm at 90° and 45°, max. cutting length: 6000mm, saw blade speed: 2800rpm. Air consumption per cycle with/without spraying: 64l/40l. Documentation available. On-site inspection is possible.
used
Table dimensions: 560x450mm.
used
Max. ram force: 1600kN, length: 3170mm, width: 2500mm, height: 5080mm, weight: 23t, with documentation.
used
Pressing force: 3200kN, stroke: 700mm, table dimensions: 2500x1300mm, weight: 63t, with documentation.
used
Nominal force: 3150kN, table dimensions: 2500x1600mm, stroke speed: 20-80/min, ram stroke: 280mm, ram adjustment: 90mm, weight: 68t, with Transfer and Sheet Metal System Dreher.
used
Nominal pressing force: 100t, an inspection is possible.
used
Pressing force: 300t, there are also straightening machines and coilers available, with documentation, worked until the end, an on-site inspection is possible.
used
Punching force: 630kN, stroke adjustment: 10-80mm, ram adjustment: 80mm, stroke speed: 65-400/min, connected load: 11kW, length: 1590mm, width: 1650mm, height: 3000mm, weight: 9.5t, with documentation.
used
Also suitable for processing flat steel, including documentation, without accessories, machine was scarcely used.
used
Max. operating temperature: 1000°C, with Jumo IMAGO 500 temperature control and gas control (currently forming gas 95/5).
used
There are one Somavis T-8K and one T-8L available, max. working diameter: 6mm, max. shaft length machine 1/ 2: 80/ 100mm, output: 200-600/min.
used
Used double shaft kneader KÖNIG, type: W160 -In bakery condition- - for 160 kg dough - including 1 tank car - other tank wagons on request Visits and test runs are possible by arrangement.
used
Needle distance: 14mm, number of needles: 2.
used
Effective width: 1500mm, screw diameter: 2x 500mm, motor power: 2x 3.5kW, outlet: 2x 800x800mm, length: 7000mm, conveying speed: 50m/min, with steel construction underframe, closed constructional design with bunker walking elevation, an inspection is possible, year of construction unknown, was overhauled in 2022.
used
There are nine identical double-chamber silos available, material: aluminium AlMG 3, capacity: 2x50m³, bulk density: 600kg/m³, diameter: 3500mm, height: 13,780mm, weight: 3.41t, with documentation.
used
Capacity: 3000l, rotational speed: 1500/min, weight: 21t, with documentation.
used
Suitable for cooling and tempering, motor rotational speed: 1440/min, motor power: 4kW.
used
Usable volume: 1400l, melting kettle capacity: 90l, with anchor agitator and a homogenizer, for heating and cooling, was mainly used for the production of lotions, an on-site inspection is possible.
used
offer 22556 Specifications: - Saw blade diameter 420 mm - Saw blade bore 30 mm - cutting length 3000 mm - smallest cutting length at 90° + 45° 335 mm - Intersection area see diagram attached - Swivel range inwards manually 90 - 22.5 ° - Tilt range inwards manually 90 - 45 ° - Saw blade speed 2800 rpm - Drive 380 V / 2 x 4000 Watt - Compressed air connection 7 bar - Air consumption per working stroke approx. 64 l - Space requirement approx. W 4500 x H 1950 x D 1600 mm - Weight approx. 1400 kg - with: - Cutting length adjustment with positioning control - Positioning control renewed approx. 2002 by WOLFF - Saw unit swivel and tilt for high and wide profiles, - as well as cut-outs
used
I sell a continuous double mitre saw with scoring OMGA TI2500 Super, year of construction 2003. Motor 5kW on each side for both main saw and scorer. Working width max. 1200mm Cutting depth (slot length) 2500mm Underpressure for this and light elements 1 pc. on each side. Self pump. Material pressures top 1 pc. on each side. Available same. Fully operational. All errors fixed.
used
Passage width 2500 mm Stroke 900 mm Total power requirement 62 kW Machine weight ca. 27,5 t Dimensions L x W x H approx. 3950 x 2200 x 4850 mm Retraction force 40 t Master cylinder 2 pieces Column diameter 220 mm Installation height 1300 mm Table size 2500 x 1600 mm Ram size 3100 x 16000 mm Table height above floor approx. 900 mm Flow speed 200 mm/sec Return speed 200 mm/sec Working speed 5 - 15 mm/sec Oil tank 1500 l Oil quantity 1200 l Pressure control adjustable from up to 50 - 400 t Thermoforming cushion 1400 x 800 mm Deep-drawing unit capacity 30 - 60 t Deep-drawing cushion stroke 250 mm Deep-drawing cushion speed 5 - 80 mm/sec robust machine body with solid welded construction low-maintenance and reliable Piston rod with induction hardening and chrome cladding T-slots according to customer requirements, if not specified 22mm according to DIN CE Certific ...
used
used
used
used
used
used
Double-sided grinding and polishing block MEYER type SMP Masch. No. 848 Year of construction 1963 Shaft diameter 50 mm Grinding wheel holder 305 mm Wheel spacing 1470 mm Grinding and polishing wheel diameter max. 800 mm Working height 550 mm Speed 710 / 800 / 950 rpm. Drive power 2x 3 kW mains connection 380 Volt, 50 Hz. - two drive motors for each working side separately- star-delta switch for each drive motor separately - speed change over flipping the drive belt - dust extraction flange 100 mm- mounted are 2 pieces corundum grinding wheels with 40 mm width, approx. 560 / 480 mm space requirement L x W x H 1700 x 1200 x 900 mm Weight 850 kg good condition; used
used
used
used
used
Reel on and off reel, reel GSW SCHWABE Type LHD 50/800 Probe Double unwinding reel, double uncoiler Fabr. No. 5775 Year of construction approx. 1995 Coil weight 50 kg per side Coil width max. 130 mm Coil inner diameter 155 - 445 mm Coil outer diameter 850 mm Plant discs 850 mm Start-up rings 850 Center reel shaft to reel foot 980 mm - Reel structure manually rotatable by 180 with latching steps - central spread via rotary lever adjustment - mechanical disc brake, adjustable brake shoes via knurled screw Space requirement L x W x H 1000 x 850 x 1500 mm Weight 190 kg good condition; used
used
Double diaphragm pump with air drive DEPA type DH40-FA-ZRT Air operated diaphragm pump, double pump Series no.: B1802498 Year of construction 09.05.2018 Temperature: max. 130C Size: 40 Grain size: max. 16 mm Suction height: approx. 2 m Suction height filled with prudukt: approx. 9 m Operating pressure: max. 7 bar Air connection: 3/8 Suction connection: 1 1/2 Pressure connection: 1 1/2 - self-priming - Aluminium housing - Diaphragm plate made of stainless steel - Membrane made of nopped E4® PTFE composite balls made of PTFE ball seats made of stainless steel Space requirement: L x W x H: 370 x 270 x 450 mm Net weight: 15 kg very good condition; used
used
Double diaphragm pump with compressed air drive DEPA type DH50-FA-ZRT Air operated diaphragm pump, double pump Series no.: B1600416 Year of construction 26.01.2016 Temperature: max. 130C Size: 50 Grain size: max. 18 mm Suction height: approx. 2 m Suction height filled with pressure: approx. 9 m Operating pressure: max. 7 bar Air connection: 3/4 Suction connection: 2 Pressure connection: 2 - self-priming - Aluminium housing - Diaphragm plate made of stainless steel - Membrane made of nopped E4® PTFE composite balls made of PTFE ball seats made of stainless steel Space requirement: L x W x H 550 x 350 x 560 mm Net weight: 35 kg very good condition; used
new
DESCRIPTION ITS twin-shaft shredders with low speed and high torque designed to guarantee high performance and maximum reliability in the shredding of tough or bulky materials. Their solid and sturdy construction surpasses any other shredder on the market. As previously said: Given the large size of the grinding chamber and the solid construction, they are particularly suitable for grinding bulky and tough products such as wooden pallets, cardboard cores, metal scraps of various kinds and sizes, stacks of paper / cardboard sheets and many other materials that are usually difficult to grind. APPLICATIONS Large rolled up carpet Cardboard cores Pile of cardboard sheets Metal scraps WORKING PRINCIPLE The material is fed through a loading hopper placed above the grinding chamber which contains two rotating hexagonal shafts, equipped with circular blades of prede-fined thickness w ...
used
300 t , Stand distance 1.800 , with rope passage , Installation height 1.000 , Table 1.800 x 1.000 , Ram 1.800 x 1.000 , Hub 600 , Rapid traverse to + From 414 mm/sec. , ram speed 10 - 50 mm/sec. , retraction force 380 kN , table cushion 800 kN , 90 kW , Weight 43.000 kg , ground-level installation
used
Thank you for your interest in our used machines, which we can offer you as follows: Model: Double Z kneader with hand tilt Trog dimensions: 350x365x280mm (lxwxh) Net capacity: approx. 35 l total Electrical: 400V 3 ph Dimensions: 1200x800x1650mm (l/w/h) Weight: approx. 350 kg Details: Hand tilting, parts made of stainless steel in contact with the product We offer this machine for sale "as is" to the exclusion of any warranty/claims for defects or representations. ex stock Hess. Lichtenau; Unpacked