We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,107 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
new
pressure: 220 t distance between columns: 2065 mm stroke: 400 mm working feed: 3,8 mm/sec piston stroke: 300 mm : 700 mm adjustment of press crosshead: 1500 mm slide adjustment -horizontal: 2500 mm tank capacity: min 30 l feed speeds: 13 mm/sec pressing speed: 2,7 mm/sec return speed: 24 mm/sec total power requirement: 10 kW weight of the machine ca.: 13 t dimensions of the machine ca.: 3,5 x 3,05 x 2,9 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 150 t distance between columns: 1565 mm stroke: 450 mm : 700 mm adjustment of press crosshead: 1100 mm slide adjustment -horizontal: 2150 mm feed speeds: 9,0 mm/sec pressing speed: 2,0 mm/sec return speed: 15,4 mm/sec Pressure power: 320 bar table-size: 1550 x 3000 mm table height: 600 mm total power requirement: 15,4 kW weight of the machine ca.: 6,5 t dimensions of the machine ca.: 3250 x 2500 x 2550 m This 150 ton gantry press is eminently suitable for straightening large and heavy structures and sheets. These Profi Press portal presses have a movable frame and a movable cylinder. Thanks to these features you have an easy access the different pressing and straightening points of the material. The longitudinal displacement of the frame is carried out by a frequency inverter and cogged belt to ensure precise slides. The lateral movement of the cylinder / headstock is motorised ...
new
pressure: 160 t distance between columns: 1100 / 1500 (Option) mm stroke: 400 mm working feed: 2,4 mm/sec : 700 slide adjustment -horizontal: 2150 mm tank capacity: min 30 l feed speeds: 7,48 mm/sec pressing speed: 2,4 mm/sec return speed: 9,35 mm/sec Pressure power: 255 bar table-size: 1740 x 996 mm total power requirement: 3 kW weight of the machine ca.: 2185 t dimensions of the machine ca.: 1,74 x 1,73 x 2,185 m This Profi Press portal press with a manually movable portal is made in the Netherlands and has a 160 tons capacity. The quality of these hydraulic portal presses is very high and the operation of the press is similar to the operation of our well-known motorised workshop presses (they are made in the same factory). Please find the technical specifications of this type of Profi Press below and do not hesitate to request a free quotation or to contact us for any further informat ...
used
pressure: 160 t dayligth: 700 mm number of strokes adjustable: 30 - 180 min table-size: 1600 x 640 mm ram surface: 1440 x 950 mm distance between columns: 1600 mm hole in the table: 1300 x 350 mm ram adjustment: 100 mm daylight between the side columns: 640 x 700 mm stroke of ram - solid: 40 mm total power requirement: 30 kW weight of the machine ca.: 25 t dimensions of the machine ca.: ca. 3 x 2,3 x 4 m - With hydraulic overload - With shuttle table device Machinewill be partly recondition (with new paint, new cabinet) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 40 t distance between columns: 600 mm stroke: 160 mm dayligth: 360 mm table-size: 560 x 400 mm ram hole: 40 H 7 DIN 810 mm oil volume: 500 l return speed: 200 mm/sec die cushion hydr. pressure/stroke: 60 capacity of ejector: 25 t total power requirement: 15 kW dimensions of the machine ca.: 1.44 x 0.95 x 2.54 m pressing speed: 27 mm/sec return speed: 200 mm/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 100 t distance between columns: - mm stroke: 350 mm table size: 1150 x 700 mm total power requirement: 11 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 160 t dayligth: 600 mm stroke: 25 - 150 mm table surface area: 1500 x 900 mm ram surface: 1500 x 900 mm ram adjustment: 100 mm daylight between the columns: 1500 mm daylight between the side columns: 400 x 200 mm distance between columns: 1680 mm weight of the machine ca.: 15 t dimensions of the machine ca.: 2,7 x 1,8 x 4,4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 40 t dayligth: 250 mm stroke: 8 - 50 mm table clamping surface LxW: 620 x 450 mm table height over floor: 980 mm no. of strokes: 85 - 500 Hub/min distance between columns: 680 mm ram - range of adjustment: 50 mm number of T-slots: 4 ram surface: mm total power requirement: 8 kW dimensions of the machine ca.: 2,3 x 2,2 x 2,8 m weight of the machine ca.: 5,8 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 015 t dayligth: - mm strokes per minute: 200 - 2000 table surface area: - mm ram surface: 490 x 200 mm sheet width: 5 - 50 mm adjustment of stroke: 10-30 mm weight: 3 t dimensions: 1370 x 1200 x 2200 mm Drive: 10 kW hole in the table: 350 x 100 mm table width: 530 / 210 mm table length: 530 / 350 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Double pump for Krauss Maffei machines Voith Rexroth control pumps 3-fold SY2DFE1-21/071-071 KM No. 6441936 MNR: R900751978
used
ROTOX SZK 502 double head welding machine was manufactured in Germany in 2007. The machine designed to weld two 90° angle joints in one working cycle, achieves high process stability and optimum temperature of the welding plates and stop blades made of hardened stainless steel. Hollow PVC bar sections with a maximum length of 2550 mm are welded on a stable structure by two welding heads made of high-quality cast aluminium. The ROTOX double head welding machine weighs 550 kg. Technical specifications of ROTOX welding machine SZK 502 - machined parts: hollow PVC bar sections - maximum section length: 2550 mm - minimum section length: 440 mm - maximum section height: 160 mm - minimum section height: 30 mm - welding angle: 90° - welding stitch limitation: 2 mm - workpiece tensioning: pneumatic - screw spanner with hexagon socket 3 mm - jaw spanner 10/13 mm - control cabinet s ...
used
Automatic labeling and weighing train from the German manufacturer BIZERBA model GV. Automatic labeling and weighing system for packaged products in the food area. Superior double labeling. Industrial equipment. Electrical power: Voltage 220 V, Frequency 50 Hz Current 2.4 A. Maximum package dimensions: 300 mm wide x 540 mm long x 240 mm high External dimensions of the machine: (mm) 3100 long x 720 wide x 1700 high. Thermal printhead - 8, 0 dot resolution Memory: 2 MB Weighing from 1gr to 6000gr. Maximum labeling capacity 60 packs/minute. The equipment reviewed, rebuilt and guaranteed with the following maintenance performed: change of conveyor belts, thermal print head and motor belts. High quality equipment and great performance in terms of speed and reliability.
used
Steam generation plant consisting of Double flame tube boiler with economiser, 2 x SAACKE burner Teminox for natural gas H, calorific value HS 11.4 kJ/Nm³, 14MW (2 x 7 MW), 17 to. Saturated steam at 20 bar ü (25 bar hp). Boiler: Manufacturer LOOS Deutschland GmbH Type ZFR 2300 Type of large-capacity water boiler with two flame tubes (three-speed) and a flue gas water preheater (Economizer) Permissible operating pressure (PS): 24-25 bar Permissible operating temperature: 224°C Permissible steam output: 23 to. Saturated steam Burner: 2 x SAACKE Type Teminox GS 75-22 Fuel: Natural gas There is a soundproofing hood for each burner Fireplace: 37 meters above ground Outlet area: 0.507 m² Stainless steel double fireplace Water treatment plant Manufacturer CHRIST consisting of softening system and downstream reverse osmosis system Complete installation from y ...
used
LIQUIDATION of Double hood vacuum machine from the German manufacturer of high quality KRAMER GREBE, model QUICK AUTOMATIC. Its condition is of occasion equipment totally revised in its entirety (re-release) guaranteed. Built in stainless steel and aluminum. The machine is ready to plug in and work with. Busch empty pump: 63m3. Final pressure: 0.5 mbar Vacuum system: per sensor External measurements of the machine: 1000 mm long x 800 mm wide x 950 mm maximum height down lid, 850 mm working height. Camera dimensions: 430mm x 470 mm x 160 mm high. Welding bar measurements: 430 mm x 2. Weight: 175 Kg. Voltage: 380 V, 3 Ph, 50 Hz, Vacuum machine, vacuum hood, vacuum packaging machine, vacuum hood machine, meat machinery, packaging machinery. Equipment fully revised, conditioned and guaranteed. RE-RELEASE, OCCASION. NEGOTIABLE PRICE. Transport costs on behalf of the buye ...
used
S39 - used approx. 60 m³ / 60,000 ltr double-walled steel tank, heating oil tank, water tank, fire fighting tank, water cistern. technical details: capacity: approx. 60 m³ / 60,000 ltr material: steel tank, double-walled, DIN 6616D/6601 manufacturer: Dehoust year of construction: 2007 factory no.: 17/07512 weight: approx. 11 t dimensions: Ø approx. 2.90 m × L approx. 9.52 m × total H approx. 3.30 m Other: Used, in good condition, above-ground storage tank, steel tank on 2 steel bases attached to the tank, former heating oil tank, lid and connections on top of the tank body. The container has been emptied and professionally cleaned inside. According to age, traces of use are present. The container can be used as a storage tank for water and many different media. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your d ...
used
Double sided sander Stähle Saturn Duo Comfort Technical data Electrical power:11-14 kW (with brushing unit) - sanding motors 2x4,2x5,5 or 2x6,6 kW Compressed air: 8 bar, 400 to 500 l/min Sanding belt speed: 25m/sec Dimensions: Length: 1740 mm Width: 1070 mm or 1270 mm (with cross-cut) Working height: 825mm Workpiece dimensions: Thickness: 10mm min - 150mm max Width: 10mm min - 180-300 mm max Length: 290 mm min - unlimited Exhaust flanges: 2x80mm dia., 2x120 mm dia. (required air velocity 30m/sec at the flanges)
used
We can offer 2 twin screw extrusion compoundibg lines,manufactured in 2015 diameter 75mm, L/d 52. water circle pellitzer.drive motor power 160kw.short time working, very good condition.Serious buyers contact us.
used
mytron 160 K CO2 Double Incubator The CO2 Incubator 160 / 160K provides the "in vitro" growing cell and tissue cultures with environmental conditions that are very close to the physiological values of the organism. Interior volume: approx. 160 l Weight: 70 kg Recirculating air circulation: by fan Cooling: Cooling unit Temperature display: Setpoint and actual value display Temperature range: 5 °C above room temperature to 70 °C Temperature range (cooled): +15°C to 70°C at 23°C ambient Temperature constancy: +/- 0.2 K temporal Humidity display: setpoint and actual value display Humidity range: >/=95 % Moisture resistance: +/- 2.5 % CO2 display: setpoint and actual value display CO2 range: 0% to 20% CO2 CO2 constancy: +/- 0.2 % CO2 CO2 recovery time: 1% CO2/min Power supply: 230 V, 50 Hz, 2 x 8 AT WxHxD= 130x85x70 cm More items new and used - you can find them i ...
used
mytron 160 K CO2 Double Incubator The CO2 Incubator 160 / 160K provides the "in vitro" growing cell and tissue cultures with environmental conditions that are very close to the physiological values of the organism. Interior volume: approx. 160 l Weight: 70 kg Recirculating air circulation: by fan Cooling: Cooling unit Temperature display: Setpoint and actual value display Temperature range: 5 °C above room temperature to 70 °C Temperature range (cooled): +15°C to 70°C at 23°C ambient Temperature constancy: +/- 0.2 K temporal Humidity display: setpoint and actual value display Humidity range: >/=95 % Moisture resistance: +/- 2.5 % CO2 display: setpoint and actual value display CO2 range: 0% to 20% CO2 CO2 constancy: +/- 0.2 % CO2 CO2 recovery time: 1% CO2/min Power supply: 230 V, 50 Hz, 2 x 8 AT WxHxD= 130x85x70 cm Buy incubators and other products at low pric ...
used
Double paddle mixer,stainless steel,standing on wheel rack,with control panel.
new
Cylindrical storage tank, factory new Capacity: 60 cbm / Medium: Fuel oil Material: S235JR (St 37.2) raw inside, blasted outside, primed and painted in RAL 7035 - light grey Dimensions: 2,500 mm diameter, 12,650 mm full length Design: according to DIN 6616/2 or DIN EN 12285-2, double-walled Test pressure inner tank 2 bar test overpressure Double jacket 0.6 bar incl. control fluid in double jacket for above-level storage with test certificate and documentation Container equipped with GOK Lag 2000 and limit sensor as overfill protection Equipment: 1 dome 600 mm li.W. with cover, gasket and screws 3'' filling cable with TW coupling 3'' Vent with cap 1 1/4'' Suction line with reduction to 1'' 1'' for limiter GWG 23-Ro 1'' nit dipstick 2'' reserve 1 pair of permanently welded steel saddle feet 1 suspension ladder with pedestal, galvanized according to UVV ...
used
Grinding length: 0 mm Grinding width: 0 mm Grinding height: 0 mm Distance between grinding wheels: 0 mm Grinding wheel diameter: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Max. work-piece height: 80 mm Grinding width: 40 mm Grinding wheel: outside diameter: 400 mm inside diameter: 250 mm Width / height: 50 mm Grinding wheel right side: Grinding wheel speeds: from: 134.5 rpm up to: 1435 rpm Peripheral speed: 24 m/s Grinding weehl left side: Rotation speed: 1150 rpm Peripheral speed: 3 - 30 m/s Feed range: 26 - 246 mm/s Voltage: 380 Volt Total installed power: 30 kW Machine´s weight about: 4200 kg Overall dimensions machine: Length: 3300 mm Width: 2600 mm Height: 2300 mm Dimensions electric cabinet: Length: 1800 mm Width: 400 mm Height: 2000 mm Various accessories: Coolant system Wheel trueing attachment Measuring instrument: IONIC Workpiece loader Automatic loading and unloading uni ...
used
Grinding length: 0 mm Grinding width: 0 mm Grinding height: 0 mm Distance between grinding wheels: 0 mm Grinding wheel diameter: 0 mm CNC Brand: 0 CNC Model: 0 Control: SIEMENS 840 D Technical data Grinding dimension: Continuous-cut grinding: 1 - 20 mm Continuous plunge-cut grinding: 1 - 20 mm Dive grinding: 2 - 80 mm Grinding width: Continuous-cut grinding: 8 - 80 mm Continuous plunge-cut grinding: 8 - 80 mm Dive grinding: 205 mm Number of grinding heads: 2 Arrangement: bilateral (above, below) Grinding wheel speeds: from: 24 m/s Diameter of grinding wheel: 457 mm Feed range: 20 - 240 mm/s Cutting speed: 63 m/s Voltage: 380 Volt Grinding motor power: 2 x 23 kW Machine´s weight about: 9000 kg Overall dimensions machine: Length: 4700 mm Width: 4200 mm Height: 3000 mm Various accessories: Workpiece conveyor
used
The machine has been overhauled in the workshop. It was repaired, defective parts were replaced and functionally tested . The spindle bearing has been renewed, the rotary table drive has been overhauled Specifications Vertical grinding spindle assembly Workpiece diameter up to 30 mm Max. workpiece height 10/20 mm Grinding wheel diameter 300 mm Grinding wheel rotation speed 35 m/s Workpiece feed 1.5 to 15 m/min Drive power grinding wheel motor 2 x 22 kW Total drive cable approx. 50 kW Machine weight approx. 4.5 t Total space requirement approx. L x W x H 3.3 x 2.6 x 2.6 m The DISKUS DDS 300 RPD has been completely dismantled, cleaned, assembled and functionally tested. Spindle bearings and rotary table drive have been overhauled. Equipped by the manufacturer for grinding with CBN discs. The machine can be viewed by arra ...
used
Double grinding machine metal Grinding wheels D=300mm W=40mm 400V 50HZ G&-4928-M3XQX
used
Litz LH630B Double Table Horizontal Machining Center Machine is in very good condition
used
Material: PE, PP, PS, ABS // Details: DC motor, segmented screws and cylinders, screw speed max. 300 rpm, degassing, vacuum pump, mass pressure and mass temperature sensors, strand head, control cabinet for heating and motor control. Screw Ø: 2x 67 mm L/D: 34:1 Motor: 97.5 kW (DC)
used
Material: PE, PP, PS, ABS // Details: DC motor, segmented screws and cylinders, screw speed max. 300 rpm, degassing, vacuum pump, mass pressure and mass temperature sensors, strand head, control cabinet for heating and motor control. Siemens Simatic OP17 controller Screw Ø: 2x 75 mm L/D: 36:1 Motor: 143 kW (DC)
used
Technical data Execution: milling Flat cams: max. diameter: 260 mm Bell cams: max. diameter: 250 mm max. height: 200 mm Voltage 50 Hz 3x: 380 Volt Overall dimensions machine: Length: 1600 mm Width: 900 mm Height: 1700 mm Various accessories: Coolant system Lamp Milling head
used
Technical data Work-piece diameter: 5 - 50 mm Max. work-piece height: 1 - 70 mm Arrangement: bilateral (above, below) Grinding wheel: outside diameter: 457 mm inside diameter: 76.2 mm Width / height: 75 mm Grinding wheel speeds: from: 251 rpm up to: 1254 rpm from: 6 - 30 m/s Speed of the work-piece driving plate: from: 21.8 rpm up to: 215 rpm Voltage: 380 Volt Grinding motor power: 2 x 30 kW Total installed power: 35 kW Machine´s weight about: 4000 kg Overall dimensions machine: Length: 2450 mm Width: 1100 mm Height: 2700 mm Various accessories: Measuring instrument: IONIC
used
Control: REXROTH INDRAMAT System 200 BTV 20 Technical data Max. turning diameter: 200 mm Turret number of tools: 2 x 12 Max. workpiece height: 350 mm Spindle speeds: stepless up to: 8000 rpm Feeds: stepless up to: 5000 mm/min Voltage 50 Hz 3x: 400 Volt Motor power: 20 kW Machine´s weight about: 6000 kg Floor space required: Length: 3000 mm Width: 1700 mm Height: 3350 mm Various accessories: Full splash cabin
used
Technical data Max. work-piece height: 80 mm Number of grinding heads: 2 Arrangement: horizontal Work-piece driving plate: Grinding wheel: outside diameter: 300 mm inside diameter: 233 mm Width / height: 50 mm Grinding wheel speeds: from: 1530 rpm up to: 24 m/s Work-piece advance: Speed of the work-piece driving plate:: 29.6 - 192 mm/s Voltage: 380 Volt Machine´s weight about: 2500 kg Overall dimensions machine: Length: 3050 mm Width: 1400 mm Height: 1600 mm Various accessories: Measuring instrument: PRETEC Workpiece loader
used
Chuck diameter: 0 mm Turning diameter: 970 mm Number of chucks: 2 MACH-id 5587 MAKE DeMoor TYPE 825 S-360 YOP 1975 SPECIFICATIONS Swing over bed Ø 970 mm Swing over cross slide Ø 700 mm Spindle bore 360 mm Spindle power 22 kW Stroke pinole 360 mm Spindle taper 6 Mk Speeds / ranges 28 - 500 Rpm DIMENSIONS Length 10.000 mm Width 2.200 mm Height 2.300 mm Weight   ...
used
Capacity: 1 t Bed length: 0 mm Bed width: 0 mm Slide length: 0 mm Slide width: 0 mm Slide stroke: 0 mm Eckold KF 170 PD Kraftformer
used
Capacity: 1 t Bed length: 0 mm Bed width: 0 mm Slide length: 0 mm Slide width: 0 mm Slide stroke: 0 mm MACH-id 3751 MAKE Walter Eckold TYPE KF 665 GIGANT YEAR 90 er DIMENSIONS Length 2400 mm Width 1000 mm Height 2200 mm Stoke´s 150 - 300 - 600 Adjustable ram 0 - 80 mm Forming capaity steel 6 mm Forming capacity alu 8 mm
used
Capacity: 1 t Bed length: 0 mm Bed width: 0 mm Slide length: 0 mm Slide width: 0 mm Slide stroke: 0 mm Eckold KF 309 Kraftformer
used
Capacity: 1 t Bed length: 0 mm Bed width: 0 mm Slide length: 0 mm Slide width: 0 mm Slide stroke: 0 mm Eckold KF 309 Picolo Kraftformer
used
Capacity: 1 t Bed length: 0 mm Bed width: 0 mm Slide length: 0 mm Slide width: 0 mm Slide stroke: 0 mm Eckold KF 170 PD Pneumatic 2 Kraftformer
used
Capacity: 1 t Bed length: 0 mm Bed width: 0 mm Slide length: 0 mm Slide width: 0 mm Slide stroke: 0 mm Eckold KF 460 Kraftformer
used
Capacity: 1 t Bed length: 0 mm Bed width: 0 mm Slide length: 0 mm Slide width: 0 mm Slide stroke: 0 mm Eckold KF 330 Kraftformer
used
Capacity: 1 t Bed length: 0 mm Bed width: 0 mm Slide length: 0 mm Slide width: 0 mm Slide stroke: 0 mm Eckold KF 665 Gigant Kraftformer
used
Table diameter: 2140 mm Turning diameter: 2200 mm Turning height: 1000 mm Motor power: 0 HP/kW Positions ATC: 0 Positions APC: 0 SPECIFICATIONS Max. turning diamter Ø 2200 mm Table / chuck size Ø 2140 mm Workpiece height 1000 mm Work piece weight 500 Kg Horizontal movement support / ram 2 x support mm
used
Table diameter: 3000 mm Turning diameter: 3500 mm Turning height: 2245 mm Motor power: 0 HP/kW Positions ATC: 0 Positions APC: 0 CNC Brand: _Unknown / Other CNC Model: R & D - MTC S01 Make Dorries 35 Type SD 300 Year 1979 / 1998 R & D - MTC S01 Centre height (mm)Table = 3.000 Center distance (mm)Swing = 3.500 Spindle bore Height = 2.245 Table load = 25 Ton Table speed = 100 Rpm Cutting force = 75000 N
used
Table diameter: 6300 mm Turning diameter: 6550 mm Turning height: 5300 mm Motor power: 0 HP/kW Positions ATC: 0 Positions APC: 0 Make Kolomna 63 Type KY 564 Q1 Year 1993 Double column vertical borer kolomna 6300 vtl Centre height (mm) Table = 6.300 Center distance (mm) Swing = 6.550 Spindle bore Height = 5.300 Load = 160 Ton 4 axis DroTriple chip comnveyor West europe under power West european electric cabinet Weight 270 Ton
new
Very high-quality CNC – controlled under-table two-unit double miter precision circular sawing machine with schifter cutting device (heavy version - 3,500 kg dead weight) Brand new, immediately available from stock (subject to prior sale). For the precise and rational cutting of large and heavy profiles made of aluminium - non-ferrous metals - various plastics. The machine can be used both for single cutting - when cutting with two sawing units at the same time (smallest section length 450 mm / largest section length 5,000 mm) or in automatic mode – when used as single-unit circular saw machines, so that Section lengths from 5 mm to 15,000 mm and longer possible. Five CNC axes for the electronic rotation of the saw tables infinitely variable over the entire rotation range, the vertical inclination of the saw blades electronically infinitely variable bet ...
used
Specifications: - Grinding wheel diameter approx. 500 mm - Grinding wheel width approx. 50 mm - Grinding wheel bore approx. 127 mm - Disc speed 950 rpm - Drive 400 V / 3.3 kW - Working height approx. 800 mm - Working depth / protective depth adjustable - Connections for suction pipe 100 mm - Space requirement approx. W 1250 x H 1150 x D 650 mm - Weight approx. 350 kg
new
Very high-quality CNC – controlled two-unit double mitre precision circular sawing machine (heavy version - 2,500 kg dead weight) Brand new, immediately available from stock (subject to prior sale) For precise and rational cutting even of large and heavy profiles made of aluminium - non-ferrous metals - various plastics. The machine can be used both for single cutting - when cutting with two sawing units at the same time (smallest section length 370 mm / largest section length 6,000 mm) or in automatic mode – when used as single-unit circular saw machines, so that Section lengths from 5 mm to 15,000 mm and longer possible. Three CNC axes, electronic inclination of the saw units infinitely variable over the entire inclination range. SCHNEIDER® feed motors and electronic motor controllers. CNC control with Windows 10 operating system and 10.4" color di ...
used
Laska Mixer ME 250 VAC Capacity 180 Kg Mixing System Z Arm Kneader Mixer
used
Mikrosan MCV 67/22D Double Screw Extruder Parallel screw New shaft sleeve New technology screen Machine is in very good condition