double d used for sale

Three-jaw chuck, 3-jaw chuck -Type: DHB 200x3x5 TGL 30 2332 -Mouth size: Ø 200 mm -Passage: Ø 54 mm -max.: 3000 rpm -Short taper mount: Ø 105 mm -Weight: 24 kg

here a Top Diosna RS 30 S with 2 brooms and 2 boilers The machine has an extra power connection has been technically checked and cleaned.

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 270 mm -Throughout: Ø 77 mm -Weight: 27 kg

Hydraulic pump, oil pump, gear pump, central lubrication, oil circulation system -Power: 0.07 kW 2700 rpm -Protection class: IP 44 -Pump output -Number: 1x pumps available -Price: per piece -Dimensions: 213/85/H112 mm -Weight: 3 kg

Used drum mixer made by ,,IWS” INOX WELDING SERVICES, 1000 L capacity. Stainless steel. New: 2022 Drum mixer for bulk and granular materials. 2 pieces available.

Power supply unit, built-in power supply unit -Type: (DIN 41752) G24 G5/25WRGD -System: SVS2 -Current input: DC 24V -Current output: DC +5V/25A DC +-15V/0.3A -Dimensions: 270/80/H220 mm -Weight: 2.5 kg

CNC Machining Center Vertical DECKEL-MAHO - DMC 635 V Built in 2006 in good condition. Control iTNC 530 Heidenhain Duty Cycle: 35172 Hours: 5903 Specifications: x-travel 635 mm y-travel 510 mm z-travel 460 mm Main Spindle: Speed range - main spindle 20 - 8,000 min/-1 Drive power - main spindle 13 / 9 kW Tool holder SK 40 DIN 69871 Max. torque 83 / 57 Nm Clamping force 8 kN Workbench: Table clamping surface 790 x 560 mm Number of T-slots 4 + 1 T-slots - spacing 100 mm T-slots - width 4x 14H12 / 1x 14H7 mm max. table load 600 kg Table height above floor 720 mm Distance between spindle nose and table 120 - 580 mm Tool changer: Number of tool slots 20 pos. Max. tool width 80 / (130) mm max. tool length 250 mm max. tool weight 6.0 kg max. total weight 80 kg Tool - Tool change time 1.6 sec Changeover time span - span 6.0 sec Feeds: Rapid traverse 30 m/mi ...

Key data: 560 mm, 1200 mm, 380 mm

Lathe Core Three-jaw chuck Multifix B 2 Holder Spindle bore 52 mm Speeds 38 - 1900 rpm Steels Chuck Sharpen 380 V 25 A Length 2.80 m Width 1.00 m Height 1.60 m

grass catcher, collection container, mower deck, lawnmower, cutter bar, disc mower -without a fan -for side ejection -Dimensions: 1500/800/H1400 mm -Weight: 100 kg

Radial fan, chip extraction blower, fan, extraction, chip blower -Engine power: 37 kW -Speed: 1470 rpm -Volume flow: unfortunately not visible -Total pressure: - da Pa -Inlet connection: Ø 700 mm -Outlet connection: Ø 700 mm -Dimensions: 1750/1700/H2460 mm -Weight: 900 kg

CNC Machining Center Vertical DECKEL-MAHO - DMC 63 V Built in 2002 in good condition. Control Heidenhain TNC 430 Heidenhain Hours: 10985 Specifications: Main spindle Speed range - main spindle 20 - 8,000 rpm Drive power - main spindle 13 / 9 kW Max. torque 83 / 57 Nm Tool holder SK 40 Workbench: Table clamping surface 800 x 500 mm max. table load 500 kg Installation height max. 240 mm Number of T-slots 5 T-slots - width 14 H12 mm T-slots - spacing 100 mm Distance between spindle nose and table 150 - 650 mm Feeds Feed rate X, Y, Z: 30,000 mm/min Rapid traverse ( X / Y / Z ) 30 m/min Tool changer: Tool changer 24 pos. max. tool diameter 80 mm max. toolthrough. with a free neighbor's box. 140 mm max. tool length 300 mm max. tool weight 7 kg Total power requirement 30 kVA Machine weight approx. 4 t Space requirement approx. 4.0 x 3.5 x 2.7 m Accessor ...

Key data: 2500 mm, 10 mm

Type DA 425.10 Built in 1985 . Technical data (according to brochure) : Effective length 2500 mm Bending capacity 10 mm Stroke of the upper beam approx. 400 mm Adjustability of the Lower cheek approx. 100 mm Bending cheek approx. 100 mm Motor bending beam approx. 15 kW Engine upper beam approx. 7.5 kW Weight approx. 11 to

Weibert fs 52es TERSA digital Dressing thickness planer Planing width 520mm Tersa 4 Knife Shaft Dressing table length 2250mm Planer fence 1500mm 90°-45° Machine Grey Cast Iron Tables 7 KW (9.5 HP) 400V 50 HZ Thickness table 850x520mm Passage of 3 / 240mm Electric height adjustment of the thickness table 4 feed speeds 5 / 8 / 12 / 18 m/min Dual folding system of the tables to the rear max. chip removal 5mm Speed 5000 min/1 1 extraction connection 120 mm Weight approx. 700 kg G&STÜ-5503511

Engraving cutters, burin cutters, end mills, end mills, milling cutters -Incl. Packaging: 18 kg cutter -different diameters -Material: HSS, SS, carbide, others -is only sold complete -Weight: 18 kg

Cutter head, milling chuck, carbide cutter, indexable insert cutter -Diameter: 125 mm -Number of teeth: 9 -without indexable inserts: Carbide -Hole: Ø 40 mm -Number: 2x milling cutters available Price: per piece -Dimensions: -Weight: 2.6 kg

Power supply, converter, converter, power supply unit -Type: XT40.241 -Input: 3AC 400 V -Output: DC24V/40A -Dimensions: 250/170/H140 mm -Weight: 1.6 kg

Control Heidenhain TNC 620 Travel X/Y/Z: 1035/560/510 mm, Spindle speed: 12,000 min-1, Tool magazine for 30 Wkz., SK 40, Cooling by the spindle 12 bar, Conveyor

Gear motor, electric motor -Speed: 99 rpm -Power: 0.11 kW -Construction: B5 -Diameter shaft: Ø 14 mm -Protection class: IP 54 -Number: 1x gear motors available -Price: per piece -Dimensions: 300/145/H130 mm -Weight: 5.3 kg

Electric motor, three-phase motor with 2 speeds -Power: 0.3 kW -Speed: 1375 rpm -Shaft: Ø 22 mm -Construction: B3/5 -Protection class: IP 33 -Dimensions: 265/142/H163 mm -Weight: 9.5 kg

Bezel, stick, lynette -Max. Passage: Ø 102 mm -Tip height: 144 mm -Edition: gray cast iron -Technical drawing: in the photos -Dimensions: 270/70/H295 mm -Weight: 5.6 kg

Metal bellows coupling, claw coupling, connecting coupling -Manufacturer: Gerwah -Type: DKN 45 -Wave wave -Outer diameter: 32 mm -Inner diameter: 10 mm -Weight: 0.07 kg

Process controller, controller, temperature controller, temperature sensor, setting for temperature -Type: SIPART DR24 -Price: per piece -Number: 1x available -Weight: 1.5 kg

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 130 mm -Recess: Ø 102 mm -Bolt circle: Ø 116 mm -Through hole: Ø 29 mm -Weight: 4 kg

Inv. Num. : 6336 Type: YCK-2A Producer: Beijing YC Digittech Created: 2013 Parameters: Compressive force: 1500 kg Material Dimensions: 85.6x54 mm Machine height: 1600 mm Machine length: 700 mm Machine width: 1100 mm Machine weight: 600 kg Productivity: 3500 cards/h

Moving bezel, tracking bezel, setting stick, lynette -Max. passage: Ø 150 mm -Edition: Gray cast iron -Hole spacing: 395 mm -Peak height: 240 mm -Drawings accompanying the photos -Dimensions: 480/455/H470 mm -Weight: 25 kg

Tool holder, milling tool holder -Number: 4x SK40 recording -various versions -Collet: Ø 8/10/12/20 mm -Sale/Price: complete -Weight: 4 kg

Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 80 mm -Edition: gunmetal -Hole spacing: 90 mm -Tip height: 165 mm -Drawings with the photos -Dimensions: 210/190/H330 mm -Weight: 8 kg

three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -DH250x3-III -TGL 30-2332 -Chuck size: Ø 250 mm -Cone: Short cone 8 Ø 140 mm -Bolt circle: Ø 172 mm -Through hole: Ø 80 mm -Weight: 28 kg

Tool holder, milling tool holder -Number: 6x SK50 recording -various versions -Drill chucks: Surface chucks, reducing sleeves, cutter heads, end mills, spindle tools -suitable for tool changers -Price/Sale: complete -Weight: 24 kg

Tool holder, milling tool holder -Number: 14x SK50 recording -various versions -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -suitable for tool changers -Price/Sale: complete -Dimensions: 800/320/H540 mm -Weight: 58 kg

Tool holder, milling tool holder -Number: 14x SK50 recording -various versions -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -suitable for tool changers -Price/Sale: complete -Dimensions: 800/315/H740 mm -Weight: 66 kg

Moving bezel, tracking bezel, setting stick, lynette -max: Passage: Ø 140 mm -Edition: Red brass -Hole spacing: 335 mm -Peak height: 215 mm -Drawing with the photos -Dimensions: 450/100/H540 mm -Weight: 26 kg

Adjustable geared motor, variable speed geared motor, electric motor -Motor power: 5.5 kW -Speed range: 15 to 90 rpm -electrically adjustable -Drive shaft: Ø 40 mm -Design: B3 -Protection rating: IP54 -Dimensions: 600/700/H270 mm -Weight: 130 kg

Inv. Num. : 7386 Type: Dimension Elite Producer: Eden Praine Created: 2015 Parameters: Weight: 128 kg Equipment: Cartridges with print cartridges

Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 124 mm -Edition: gray cast iron -Hole spacing: 335 mm -Tip height: 215 mm -Drawing with the photos -Dimensions: 380/90/H400 mm -Weight: 14 kg

Contactor, semiconductor contactor, contactor, power contactor -Maximum: 22 kW 660 V -Price: per piece -Number: 8x available -Dimensions: 135/85/H115 mm -Weight: 6.5 kg

Inv. Num. : 1607 Type: CB90VZB SL 6600 Producer: DYNOBEND B.V. Created: 2011 Parameters: 3 CNC-controlled axes Programmable speed Network Connection Windows Novell and Linux Software for work preparation Standard Specifications: Bending angle max: 200° Adjustment accuracy: 1/10° Tube torsion: 360° Booster power: 70kN Software IGES Centerline without marking Pipe length max. 6.3m Tube pre- and post-carriage 300mm Max. tube diameter 90mm Crushed tubes twisted 100 x 12 x 1 5 Min. radius over rolling process with or without mandrel > 1000mm Smallest radius with fixed tool not running and not torsional > 1 5D Repeat accuracy of machine 0.1mm 3-D bends

Inv. Num. : 1609 Type: CB90VZB SL 6000 Producer: DYNOBEND B.V. Created: 2013 Parameters: Control system: IGES Maximum tube diameter: 100 mm Maximum bending angle: 200 h Precise bending: 1/10 st Number of axles: 3 pieces Maximum bending length: 6300 mm Tube rotation: 360 pcs Strength: 70 kN Repeatability: 0.1 mm Programmable speed Compatible with systems: Windows. Novell and Linux Process Planning Software 3D bends Tools for bending pipes with a diameter of 76 and 70 mm

Bezel moving, moving bezel, steady rest, Lynette -max. passage: Ø 170 mm -Support: ball bearing -Tip height: 345 mm -Hole spacing: 550 mm -Hole diameter: Ø 21 mm -Drawings: in the photos -Quantity: 1 piece available -Dimensions: 605/80/H670 mm -Weight: 59 kg

Used 250 L dough mixer by Diosna type W 402 A with three tanks. The machine has one speed.

We sell a refurbished Diosna SP120D spiral mixer.

Used Thermal Oil Ovens DAUB - 2 ThermoRoll trolley ovens for trolleys 60x80cm - 1 deck oven thermal oil - incl. boiler More information on request. Ask us for dismantling and assembly including commissioning.

Bezel, steady rest, lynette -max. passage: Ø 190 mm -Tip height: 390 mm -Support: ball bearing rollers -technical drawing: in the photos -Quantity: 1 piece available -Dimensions: 600/140/H800mm -Weight: 79 kg

Bezel, stick, lynette -Transfer in current condition as seen -Max. Passage: Ø 260 mm -Tip height: 370 mm -without: quills -Technical drawing: in the photos -Dimensions: 680/135/H830 mm -Weight: 92 kg

Key data: 3200 , 60

Screw diameter: 60 mm Injectable volume: Injection Pressure: Passage between columns: 735 x 735 Mould thickness: min: 330mm- max: 680 Opening stroke: 660 mm Number Of Cores :2 Robot interface: E67

Bezel, stick, lynette -Max. Passage: Ø 212 mm -Tip height: 319 mm -Edition: gray cast iron -Technical drawing: in the photos -Dimensions: 610/120/H650 mm -Weight: 59 kg

Key data: 13000 , 4200 , 110

Screw diameter; 110 mm Injectable volume: 4370 cm3 Injection pressure: 1815 bar Column width: 1500 x 1200 mm Mould thickness min: 700 mm max: 1400 mm Opening stroke: 1500 mm Cores: 4 Robot Interface: Yes Options: Retractable column

Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 74 mm -Edition: gunmetal -Tip height: 185 mm -Drawings: with the photos -Price: per piece -Number: 1x available -Dimensions: 370/75/H385 mm -Weight: 11.1 kg

Electric motor, three-phase motor -Volt: 415 V. -Power: 0.063/0.4 kW -Speed: 460/2840 rpm -Shaft: Ø 17 x 35 mm -Construction: B14 -Protection class: IP 65 -Price: per piece -Number: 3x available -Dimensions: 395/210/H190 mm -Weight: 7 kg

Key data: 5500

Screw diameter; H3500 - 85 mm / H2000- 65 mm Injectable volume: H3500 - 946 cm3 / H2000- 511 cm3 Injection pressure: H3500 - 1509 bar / H2000-2228 bar Column width: 930 x 930 mm Minimum mould thickness: 300 mm max: 1000 mm Opening stroke: 1100 mm Cores: 4 Robot Interface: Yes Options: Automatic clamping 24 heated zones