double d used for sale

-Stop and mixer Boku -Model: RS 40 CS -with digital control -with 1 stainless steel boiler -with 2 whisks

Control Rexroth System 200 BTV30 Circulation diameter over bed: 160 mm Circulation diameter over face carriage 250 mm Chuck diameter 160 mm Turning length 300 mm Spindle speed 8000 min-1 12-speed revolver with attached Competition. Workpiece conveyor belt Conveyor Various tool holders

MIG/MAG hose package for robots -Hose package with: wire feed for robots or automatic welding machines -Length: 3.4 m -Water cooled -Weight: 5.5 kg

Key data: 40 mm, 1007 mm

Code 231027 Rewriting Controlled Fast Radials Make DONAU Type DR 40 Machine No. 1137 – 3 Built in 1988 Drilling into full stem 60 40 mm Drilling into full GG 22 50 mm Tapping capacity into the St. 60 M 33 Tapping capacity into the GG 22 M 45 Steep taper of the drilling spindle SK 40 Feed normal ( 5x ) 0.075 – 0.6 mm/rev Drilling spindle speeds 18 pcs. 35 – 1800 rpm Drilling spindle stroke 200 mm Drilling radius min/max 350 / 1300 mm Projection min/max 120 / 1007 mm Height adjustment of the drilling spindle head 450 mm Distance drilling spindle/table min/max 350 / 800 mm Table top 1225 x 750 mm Power 2 / 3 kW 380 Volt Weight 2000 kgs Dimensions LxWxH 2300 x 1225 x 2400 mm Accessories for tapping device Coolant system Condition machine is in good condition

Module converter, electronic module -Wire type: DSV 5421-10/220 -Module: 220 V/4 KVA/10 A -with: controller BELIMO SGS -Dimensions: 275/275/H225 mm -Weight: 9.7 kg

Compressed air breathing apparatus, respiratory protection -2 bottle device -Overpressure with: pressure reducer -High pressure manometer -Demand valve with: integrated warning device -Thread connection: M 45 x 3

Round cylinders, pneumatic cylinders, standard cylinders, air cylinders, pneumatic stamps, air stamps, compact cylinders, short-stroke cylinders -Stroke: 360 mm -Piston rod: 22 mm -Dimensions: 560/76/H76 mm -Weight: 5.25 kg

Round cylinders, pneumatic cylinders, standard cylinders, air cylinders, pneumatic stamps, air stamps, compact cylinders, short-stroke cylinders -Stroke: 60 mm -Piston diameter: 60 mm -Piston rod: 16 mm -Dimensions: 207/80/H80 mm -Weight: 1.6 kg

The system consists of 9 different roller conveyor belts and 1 plastic link belt: • Roller conveyor belts, short, 2 pieces, type ITF/R-VV50, L 135 cm, roller width 35 cm, interroll drives • Roller bridge belts, 2 pieces, type ITF/R-VV50, L 98 cm, roller width 35 cm, interroll drives, fold-up • Accumulation roller conveyor belt, long, 1 piece, type ITF/R-FT50, L 294 cm, roller width 37 cm, slide belt drive, only runs when rollers are occupied • Accumulation roller conveyor belt, medium length, 1 piece, type ITF/R-VV50, L 195 cm, roller width 35, belt drive, runs only when rollers are occupied • Roller conveyor belt, medium length, 1 piece, type ITF/R-VV50, L 188 cm, roller width 35 cm, interroll drives • Roller curve belts 90°, 2 pieces, type ITF/RK-RT30-90° left/right, roller width 35 cm, interroll drives • Plastic link conveyor belt, long, 1 piece, type ITF/MGK, L 646 cm ...

Dividing head, dividing head, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder, milling cutter grinding holder -Mouth size: Ø 160 mm -without: interchangeable jaws -Central bore: mm -Dimensions: 320/230/H220 mm -Weight: 30 kg

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Stroke: 125mm -Piston diameter: 25 mm -Piston rod: 10 mm -Price: per piece -Number: 2 pieces -Dimension: Ø 27 x 267 mm -Weight: 0.4 kg/piece

Recon Part Number: 0208 8696 - with old acceptance (Part number without acceptance : 0407 9093) Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Fan, fan, electric motor, blower, centrifugal roof fan, emergency ventilation fan, flue gas fan -Speed 1420/1260 rpm -Line 0.13/0.09 kW -Dimensions 670/670/H445 mm -Weight 24 kg

Bezel moving, moving bezel, steady rest, lynette -Bezel: driving -Max. Passage: Ø 120 mm -Center height: 150 mm -Drawing: with the photos -Dimensions: 280/390/H470 mm -Weight: 18.5kg

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Festo -Type: DNC-32-300-PPV-A -Piston diameter: 32 mm -Stroke: 300 mm -Pressure: max. 12 bar -Dimensions: 455/45/45 mm -Weight: 1.5 kg

dmp Sondermaschinenbau type ORL-300 orientator for plastic bottles, bottles where the caps are not in the correct position to the position of the labels are turned by 180° before being delivered to the next machin, capacity 120 bottles per minute, electrics 3+N+PE 400V/50Hz/16A, power consumption approx. 1,1 kVA, compressed air max. 6 bar, machine floor space approx. 1200 x 1050 mm (LxW), machine height approx. 2100 mm, machine net weight approx. 200 kg

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Type: DNC-50-700-PPV-AQ -Pressure: max. 12 bar -Stroke: 700 mm -Piston diameter: 50 mm -Dimensions: 885/65/65 mm -Weight: 5.5 kg

Stick electrodes 2.5 x 250 -Type: FOX DMO Ti -Price: per package -Number: 2 packages available -Weight per package: 3.3 kg

Shaft vice, machine vice -Clamping diameter: max. 90 mm -Dimensions: 390/220/H190 mm -Number: 1x available -Price: per piece -Weight: 38 kg

max. grinding diameter: 238 - 620 mm grinding length: 190 mm workpiece length: 380 - 940 mm current capacity: 380 kVA power capacity - grinding motor: 1,1 kW speeds of grinding spindle: 2 - 10.000 U/min total power requirement: 2,2 kW Mechanic: very good: Optical condition: very good: Condition: general reconditioning: The machine can be viewed under current.: operating key and instruction: ! We have almost all spare parts for Deckel S 11 machines in stock ! Machine and accessories overhaul year of construction 2023 with CE marking and 12 months warranty (domestic)! LID S 11 TOOL GRINDING MACHINE - UNIVERSAL 400 V, 50 Hz, with CEE plug and cable Color: 2 K new paint Stand RAL 7005 mouse gray Body and accessories RAL 7035 light gray Motorized height adjustment, axial grinding spindle adjustment Complete electrical conversion includes: > Fi circuit breaker > New three-p ...

Format Range: max. 2250 mm min. 340 mm Features: longitudinal seam, folding bottom, double edge, 4-point gluing, electronic gluing unit HHS XP-E08 with 6 application heads, Primary crusher left, counter, motorized format setting, Friction feeder with vacuum and cycle control, digital position indicators, motorized transfer station, Folding middle station, UV marker, 3 x cutting alignment on the press belt, extended press belt. Overhaul 2023: cleaned, tested, painted and with new conveyor belts, as well as equipped with new transport baths. Miscellaneous: The machine can be viewed while it is running by arrangement.

overhauled Leybold DK200 gate valve pump. Immediately available. 6 months warranty.

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Short taper mount: Ø 140 mm -Passage: Ø 76 mm -Weight: 30 kg

High-intensity cold light lighting system for macroscopic applications, lamps, luminaires, lighting -Handover: in its current condition as inspected -Condition: Sold as a parts donor without light bulbs (without light bulbs) -Case dimensions: 520/220H440 mm -Weight: 16.4 kg

Moving bezel, moving bezel, resting stick, lynette -Manufacturer: TOS for lathe type SUS80 -Max. Passage: Ø 200 mm -Plating: brass -Top height: 230 mm -Drawings for the photos -Quantity: 1 piece -Dimensions: 530/200/H740 mm -Weight: 100kg

Double bench grinder, bench grinder, column grinder, column grinder -Manufacturer: Cordia, double bench grinder type DOTN-150 -Grinding wheel: max. Ø 150 x 25 x 20 mm -Motor power: 0.35 kW -Speed: 3000 rpm -Operating voltage: 380 volts -Dimensions: 410/200 / H1045 mm -Weight: 33 kg

Key data: 750 mm, 500 mm, 600 mm

Inv. Num. : 7098 Type: DBZ Producer: AXA Created: 2008 Parameters: Control system: Heidenhain iTNC53O Duty cycle: 57676 h Hours: 23680 h Work table length: 1000 mm Work table width: 500 mm Maximum table load (even): 800 kg Maximum vertical spindle speed: 6000 1/min X-axis travel: 2x 750 mm Y-axis travel: 500 mm Z-axis travel: 600 mm Maximum tool diameter: 85 mm Max. tool weight: 8 kg Max. tool length: 400 mm Number of stacking positions: 22 pieces Machine height: 3550 mm Machine length: 4460 mm Machine width: 2250 mm Machine weight: 12000 kg Equipment: Chip conveyor 300m Suction Showa CRD-1500RA-CE-0043 Preparation for the 4th axis

large working width: 2520 mm for sheets up to: 1.5 mm Upper beam opening width: 180 mm Adjustability bending beam: 40 mm Bending angle adjustment: 135° Weight: 1970 kg Dimensions: 1970 x 750 x 1250 mm

Key data: 537 , 400

Pro2 container unit with 537kW el. Performance as a pure power generator incl. heat recovery system - 40 ft normal container (L x W x H in metres) 12.2 x 2.55 x 2.55 metres with lighting - MWM genset TCG2016V12 - 537kW for landfill gas, biogas or natural gas with gas control system and control cabinets for plant control, auxiliary drive supply and GLF - Current operation hours about 87,000 - Soundproofed design as a plant container - Separation of containers into engine room / electrical room with connecting door - Access door to the engine room on the longitudinal side and electrical room on the front side - Gas detector and smoke detector - Supply and exhaust air system with backdrop silencer and supply air filtration - Engine cooling water circuit with circulation pump, warm-up control via 3-way mixer - Emergency cooling for HT circuit integrated into the engine cooling wat ...

Key data: 1350 mm, 3

SPECIFICATIONS: Working width mm: 1350 Sanding belt dimensions mm: 2620 x 1300 Configuration: I. Iron roller diameter 300 mm II. Hard rubber roller diameter 300 mm - hardness 80 shore III. Scotch Brite Brush Unit 02 Motors + power regulator KW 30 / KW 22 / KW 2,2 Complete with motorized conveyor belt mm: 3500 x 1300

Dart VMC 650 XL/A twin speed vertical machining center ::SPECIFICATIONS::: CNC Model: Fanuc CNC Version: 18 - M Tool holder: ISO 40 Spindle power: 11Kw Spindle speed: 8000 Number of tools: 24 X-axis stroke: 800mm Y-axis stroke: 500mm Z-axis travel: 610mm Rapid feeds for linear axes X Y Z: 30m/min Table size: 1000 x 500mm Table capacity: 400Kg Guides: roller High refrigerant pressure: yes Chip conveyor: belt conveyor

Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic piston, air piston -Stroke travel: 80 mm -Piston diameter: 50 mm -Piston rod: 20 mm -End position damping: adjustable on both sides Quantity: 1 piece -Dimensions: 260/65/H65 mm -Weight: 1.8 kg

Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 10 mm -Piston diameter: 40 mm -Piston rod: 16 mm -Price: per piece -Number: 4 pieces -Dimensions: 112/77/H30 mm -Weight: 0.55 kg/piece

Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 50 mm -Piston diameter: 32 mm -Piston rod: 12 mm -End position cushioning: adjustable on both sides -Price: per piece -Number: 4 pieces -Dimension: Ø 38/218 mm -Weight: 0.55 kg/piece

Round cylinder, pneumatic cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 25 mm -Piston diameter: 32 mm -Piston rod: 12 mm -Dimensions: Ø 38 x 194 mm -Weight: 0.45 kg

Infinitely adjustable cutting thickness from approx. 0 to 42mm, max. approx. 160 cuts/minute. Push-button operation, voltage 400 V / 3.0 kW, chamber length 200 x 240 x 700 mm, 1 toothed knife ready for use. Infinitely adjustable cutting thickness from approx. 0 to 42 mm, approx. 160 cuts/per minute Push button operation, voltage 400 V / 3.0 kW, chamber length 200 x 230 x 700 mm, 1 toothed knife working condition.

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Stroke: 160 mm -Piston diameter: 20 mm -Piston rod: 8 mm -Price: per piece -Number: 2 pieces -Dimension: Ø 27 x 292 mm -Weight: 0.3 kg/piece

Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 80 mm -Piston diameter: 50 mm -Piston rod: 20 mm -End position cushioning: adjustable on both sides -Max. Pressure: 12 bar -Dimensions: 300/64/H64 mm -Weight: 1.95 kg

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Stroke: 125 mm -Piston diameter: 16 mm -Piston rod: 6 mm -Price: per piece -Number: 2 pieces -Dimension: Ø 20 x 236 mm -Weight: 0.15 kg/piece

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Stroke: 50 mm -Piston diameter: 20 mm -Piston rod: 8 mm -Dimension: Ø 27 x 205 mm -Weight: 0.25 kg

Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 50 mm -Piston diameter: 40 mm -Piston rod: 16 mm -Max. Pressure: 12 bar -Dimension: Ø 46/205 mm -Weight: 1.5 kg

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Stroke: 25 mm -Piston diameter: 10 mm -Piston rod: 4 mm -Dimension: Ø 15 x 111 mm -Weight: kg

Key data: 630 mm, 560 mm, 560 mm

Year of construction 2003 Heidenhain control MC 422 18200 Spindle hours NC rotary table installed in rigid table 1000 x 600 mm Controlled B-axis 24-fold tool changer Workspace Tool holder SK40 Motor spindle 12000 rpm Incl. coolant system, chip conveyor (auger) Top condition! Machine weight 6500 kg Transport dimensions: 3.5 x 2.7 x 2.21 m

Three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 240 mm -without: interchangeable jaws -Conical mounting type: Ø 102 mm -Weight: 29 kg

Double hydraulic pump, oil pump, gear pump -Kracht: gear feed pump -without: drive -with: clutch bell for the drive -Dimensions: 490/250/H345 mm -Weight: 19 kg

Sprockets, duplex sprocket, sprocket -Number of teeth: 23 teeth -Diameter: 345 mm -Total width: 120 mm -Tooth width: 30 mm -Socket: O 90 mm -Number: 3x sprockets available -Price per piece -Weight: 50 kg -other sprockets: in stock

Sprockets, duplex sprocket, sprocket -Sprocket pitch: Duplex 1 1/2 x 1 -Number of teeth: 25 teeth -Diameter: 318 mm -Total width: 100 mm -Tooth width: 24.1 mm -Inside diameter: 80/130 mm -Number: 25x sprockets available -Price: per piece -Weight: 33.5 kg -other sprockets: in stock

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 200 mm -Short cone mount for: bayonet disc attachment -Cone size: 6 -Cone: Ø 106 mm -Bolt circle: Ø 133.4 mm -Through hole: Ø 54 mm -Weight: 15 kg

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 160 mm -DKRD Ø: 160 mm -Weight: 15.5 kg

Qty. 1 Second-hand extrusion press including log furnace Mfc.: SMS Built: 1986 Force: 960 MT (9.3 MN) Press jaw: Wide: 155 mm Height: 140 mm Max. inlet: 130 mm (144 mm block, 5 mm protection per side) Recipient: 149,9 mm Extras: Heatable tool cassette from Marx (installed 2016) Conversion of recipient to resistance heating (beginning of 2016) Punch press disc: 149,2 mm Broaching disc: 150 mm Billet Ø: 144 mm Length: 265 – 540 mm Log length: 3000-4800 mm Log Furnace Mfc.: Extrutec GmbH Built: Temperature: 480-520 °C Zone 1: 460-490 °C Zone 2: 440-470 °C Zone 3: 400-450 °C Table weight: Max. 1350 g/m Min. 80 g/m Electrical control cabinet Puller Exhausting system Cooling device Spare parts for furnace combustion air Spare parts head burner Spare parts oven stove bo ...