130,390 used machines on RESALE, but how to find them? Machine Search
Gearboxes, spur gear units used HANSEN Type: D753CT Translation i: 453 Shafts approx. Ø 38 / 150 mm Dimensions: approx. 1750 x 900 x 800 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.
Gearboxes, spur gear units used HANSEN Type: D743CT3 Translation i: 203 Shafts approx. Ø 50 / 150 mm Dimensions: approx. 1750 x 900 x 800 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.
Used DSI V-3 36/100 vertical plate freezer on Freon / NH3 with 36 stations. the freezer can be set to 3 different sizes per station with dividers. This makes it possible to freeze different products per station. Inner dimensions 1 station: 1060x100x480 mm (LxWxH). Capacity and example based on: 51,9 kg fish fillet per station. 36 x 50,9 liter freezing stations. Product temperature from +10°C to -18°C. Duration of one cycle: including defrost, loading and unloading times: 185 min Evaporation temperature of -34°C. Fish fillet: 605,9 kg/hr Capacity and example based on: 48,3 kg plat and herring per station. 36 x 50,88 liter freezing stations. Product temperature from +10°C to -18°C. Duration of one cycle: including defrost, loading and unloading times: 190 min Evaporation temperature of -34°C. Plat and herring: 549,5 kg/hr For more information please feel free ...
Diesel combined heat and power plant, CHP, generator set, power generator used A. van Kaick Year: 1991 Generator DKBN49/200-4 200 kVA 400/231 V 289 A 50 Hz Mtu 8V183TA32 MERCEDES OM 442A 240 kW 1500 rpm Tank dimensions approx. 3600 x 1500 x 1500 mm Dimensions container: approx. Mm Changes and errors in the technical data, information and prices as well as prior sale reserved.
Technical data: Maximum parent roll width: 1420 mm Minimum parent roll width: 600 mm Maximum parent roll diameter: 1500 mm Maximum parent roll weight: 2500 kg Maximum unwinding tension (Ø1500 mm): 600 N Minimum unwinding tension (Ø1000 mm): 40 N Minimum standard slitting width: 100 mm Maximum rewinding width: 1400 mm Maximum rewinding diameter: 1050 mm Maximum rewinding weight: • Ø76 mm shaft: 600 kg • Ø152 mm shaft: 1000 kg Maximum rewinding tension: 600 N Maximum production speed: 600 m/min Power supply: 3 x 400V 50Hz Installed power: 30 kW Compressed air: 6 bar, dry Materials to be slit: • Paper-based / liner-based packaging laminates. • Board from 80 to 300 g/m². Unwind section: A separate between-centers unwinder, type T9, 1500 mm diameter, including: • Hydraulic cylinder control for lifting parent rolls from the floor. • Two motors driving th ...
Colors: 8 Gearless: No Fast Sleeve change: No 4 motor cnc per printing deck: Yes Computer supervision:Yes Web width:1320 Print width:1300 Min print repeat: 380 Max print repeat:1100 Mech speed: 350m/min working speed: up to 300m/min Unwinding & winding: Turret FLYING SPLICE Max reel diameter 1000 Drying: 2 zones , 4 fans 2 gas burners Video camera: Yes Corona threatment:NO Web guides: FIFE Viscocity control Yes Wash system : yes, F&K Ceramic anilox + closed chambered doctor blade 1x 80 L/cm, 2x 200 L/cm, 2x 120 L/cm, 4x 200 L/cm , 2x 320 L/cm , 3x 400 L/cm 200 sleeves repeat between 390 mm and 1090 mm ( 8 for each following repeat x 390 , 400, 410 , 420 , 430 , 450 , 480 , 510 , 530 , 540 , 550, 630 , 660 , 670, 740 , 780 , 800 , 850 , 880 , 930 , 990 , 1030, 1050 , 1090 + 8 twinlock 740 mm + 8 twinlock 1030 Mandrels for sleeve s 6 x360 , 6x 400 , 6x 420 ...
TECHNICAL DATA: Type: 5-color digital UV inkjet press with separate white print unit Length: 4550 mm Width: 1750 mm Height: 2200 mm Weight: 3000 kg Electrical power consumption: 39 kW / 60 A Electrical supply: 400 V, 3 Ph, 50 Hz Auxiliary power: 230 V, 50 Hz (chiller) Air consumption: 100 NL/min Cooling capacity requirement: 18 kW (60,000 BTU/h) Data interfaces: USB 2.0, Ethernet COOLING UNIT (RECOLD RE-C 160 INERT) Cooling capacity: 16,000 W Refrigerant type: R134a Refrigerant charge: 4.5 kg Power consumption: 8.5 kW Maximum current: 15 A PRINTING TECHNOLOGY: Technology: Piezo DOD Printheads: Xaar 1001 Resolution: 720 × 360 dpi UV DRUING SYSTEM: UV lamps: • 1× Hönle UV GOZ, 7.2 kW • 1× Hönle UV FOZ, 7.2 kW Pinning: LED pinning after print units 1 and 5 Exhaust system: integrated lamp cooling and odor reduction unit INERT GAS CURING SYSTEM: Type ...
Diesel combined heat and power plant, CHP, generator set, power generator used DIETER KUNZLER GmbH Generator K-EA-3ST-PAR-SYN-M 500 kVA 400/231 V Synchronous 3x 362 A 50 Hz Mtu 12 V 183 AA 31 MERCEDES OM 424 225 kW 1500 rpm Dimensions unit: approx. 2500 x 1200 x 1500 mm, control cabinet approx. 2400 x 500 x 2000 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.
Diesel combined heat and power plant, CHP, generator set, power generator used DIETER KUNZLER GmbH Year: 1991 Generator 250DMED 250 kVA 400/231 V 3x 362 A 50 Hz Mtu 12 V 183 AA 31 MERCEDES OM 424 225 kW 1500 rpm Container dimensions: approx. 6000 x 2500 x 2500 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.
Denison Hydraulic P7P Slewing and Luffing Pump available for Sale. Make: Denison - Hydraulic 4Pcs Type: P7P 3R1A 5A2 B M2 04994 Serial Number: 89127 2912 49 7138 Rotation: 201024 Code No.: 023 04994 USA
Specifications Maximum pressure: 60 tons Power supply: 380V/ 11 kW Pressing force: 6.81 kg/cm² Year of construction: 2012 Bale size: 800x1100x1200 mm Productivity: approx. 3 bales/hour Bale weight: approx. 370-410 kg Price: on request We have several channel balers and balers in our warehouse and we cordially invite you to contact us!
max. grinding diameter: 238 - 620 mm grinding length: 190 mm workpiece length: 380 - 940 mm spindle turning speed - stepless: 2 - 12000 U/min current capacity: 380 kVA power capacity - grinding motor: 1,1 kW total power requirement: 2,2 kW weight of the machine ca.: 0,6 t Mechanic: very good: Optical condition: very good: The machine can be viewed under current.: operating key and instruction: 2016 S25 003004 400 V, 50/60 Hz, with CEE plug and cable Color: light gray motorized height adjustment, axial grinding spindle adjustment Equipment: Opto-electronic measuring device with measuring electronics Image processing, PC (Original ISOG) CCD camera and monitor Dividing head Sk 40 with dividing disk 24 R 1 dividing disk each 14, 16, 18 Tightening screw M 16 Counter bearing complete with 4 center punch points Center point Sk 40 with driver Twist-u. Relief grinding device with rac ...
max. grinding diameter: 238 - 620 mm grinding length: 190 mm workpiece length: 380 - 940 mm spindle turning speed - stepless: 2 - 12000 U/min current capacity: 380 kVA power capacity - grinding motor: 1,1 kW total power requirement: 2,2 kW weight of the machine ca.: 0,6 t Mechanic: very good: Optical condition: very good: The machine can be viewed under current.: operating key and instruction: 2189 400 V, 50 Hz, with CEE plug and cable Colour: body pastel turquoise RAL 6034 Stand blue-grey RAL 7031 Motorized height adjustment, axial grinding spindle adjustment Machine as new Accesories: SK 40 dividing head with 24 R dividing disc Graduated disc 20 R Tightening screw M 16 69871 Spiral and relief grinding device with rack housing Counter bearing with 4 tailstock centres Center point with driver Dressing device Dressing diamond Radius grinding device SK 40 complete with se ...
Automatic Transfer Switch - ATS Panel - ATI Panel, 1.600 Ampere - Applicable for generators up to 1.100kVA; Gross weight [kg]: 215
KVM 62/80 Pavingstone machine, 2005. Hydraulic Powerpack, KVM PLC Control, Pallet size 900 x 750, Moulds. Machine was shut down in 2010 due to a merger between 2 companies. The machine has only been in operation for 5 years and is in very good condition. PRICE INCLUDES DISMANTLING. Amexpo Consult Merkurvej 31, 9370 Hals Denmark +45 29251017
Automatic Transfer Switch - ATS Panel - ATI Panel, 2.000 Ampere - Applicable for generators up to 1.380 kVA; Gross weight [kg]: 330
Automatic Transfer Switch - ATS Panel - ATI Panel, 2.500 Ampere - Applicable for generators up to 1.730 kVA; Gross weight [kg]: 311
rated capacity: 8,1 kVA voltage: 400 / 230 V frequency: 50 Hz tank capacity: 15 l engine output: 11 / 15 KW / PS weight of the machine ca.: 0,165 t dimensions of the machine ca.: 0,88 x 0,56 x 0,76 m Diesel generator with: - equipped with electric start. - Equipped with automatic voltage regulator. - Air cooled - Mobile. - Direct injection - Low oil level alarm with auto-stop function. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
5 Colors Digital Printing Machine for Processing Roll / Role CMYK printing system based on DOD technology with UVLM based inks. With separate printing unit for white Material width = 350 mm, Print width = 330 mm, Repeat = 10 - 1000 mm, Speed max. 48 m/min, Printing Technology = Piezzo DOD Printheads – Xaar 1001 Resolution =720x360dpi, Drying = 1xUV GOZ and 1xUV FOZ from Höhnle with 7.2KW Pinning System (LED) after Pressure Unit 1+5 Ink UV – based and UV drying Material = coated and uncoated paper, white and transparent film PP, PE, PVC, POPP, aluminum foil, Unwinding max. diameter 610 mm / sleeve 76 mm, Winding max. diameter 610 mm / sleeve 76 mm, PC controlled. Accessories: Path control, Corona cooling system for UV lamps,
Piston for Idra 3300 multiblock, 419540, D300mm, Strate/Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition: New The part comes from a spare parts warehouse at a production facility, has always been stored in a dry, sealed environment, is new and in its original packaging. Piston for Idra 3300 multiblock, Piston dimensions: 1) D 160mm x length 426mm (geschliffene Fläche) 2) D 300mm x length 182mm (6 Nuten für Kolbenringe) 3) D 225mm x length 54mm (1 Rille) Ca. 185kg The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, ...
connected load frequency: 230 V battery: 24V / 100Ah Brush diameter: 510 mm turning speeds: 175 U/min 0: Luft 24 L / s tank capacity: 50 / 50 Liter weight: 160 kg range L-W-H: 1,1 x 0,52 x 1,0 mm Daewoo floor cleaning machine: Packed with battery and charger Theoretical surface cleaning: Output: 2000 m²/h Suction width: 850 mm Cleaning width: 510 mm Max. working area incline: 2% Fresh/waste water tank volume: 50/ 50 L The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
O&K FAUN V80, 8 to Diesel Forklift, 8000 KG, 3.70 m altitude, German Forklift, 8.000 h, Year 1980
BOMAG BW 200 Roller / Pneumatic Compactor, 7 to, 4 Zyl Deutz Motor, Vibration full working, German Machine, Year 1977
LEHNHOFF 2,400 mm Excavator Bucket Trench Swivel Bucket SWA 66 Year 2012
Piston for Idra 1800 multiblock, 428351, D260mm, Strate/Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition: New The part comes from a spare parts warehouse at a production facility, has always been stored in a dry, sealed environment, is new and in its original packaging. Piston for Idra 1800 multiblock, Piston dimensions: 1) D 145 mm x length 420 mm (ground surface) 2) D 260 mm x length 153 mm (6 grooves for piston rings) 3) D 200 mm x length 52 mm (1 groove) Approx. 130 kg The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech ...
Axial piston pump, E A10VSO 45 DFLR/31R-PPA12N00, Brüninghaus, mint condition Please note: This is an original Brüninghaus product and not a replica from Special offer! If you have a VAT number, we will be happy to issue you with an invoice without VAT. As good as new! The part comes from the spare parts warehouse of a certified manufacturing company, has been in storage for a long time, shows very few signs of storage, has never been used and is in mint condition. Axial piston pump, E A10VSO 45 DFLR/31R-PPA12N00, Brüninghaus, as good as new Drive shaft D25mm, 1450 rpm, DR 250 bar, 41 cm³ 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is ...
Axial piston pump, E A10VSO 18 DFR1/31R-PPA12N00, Brüninghaus, mint condition Attention: This is an original Brüninghaus product and not a replica from Special price If you have a VAT number, we will gladly issue you an invoice without VAT. New! The part was purchased from a company's spare parts warehouse, had been in storage for a long time, had never been used and is completely new. Axial piston pump, E A10VSO 18 DFR1/31R-PPA12N00, Original! Brüninghaus, neu Dr=140 bar, 1500 rpm, 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and condition ...
Waldner Dosomat 12.6 filler and sealer for foil trays. Currently set up for using 82mm diameter foils for meat paste like pate or pet foods. Machine is in lovely condition and available for inspection.
Schaudt & Studer Grinding Machines - Premium Overhauled [RETROFIT] - various conventional, cycle-controlled & CNC grinding machines - for various workpiece Ø - with grinding lengths from 200 to 3,000 mm - Control: Siemens Sinumerik ONE or Fanuc - Workpiece weight: according to customer requirements - The attractive alternative to the new machine - We are also happy to overhaul your machine, more information on our homepage Options: (other options also possible) - Balancing & grinding sensors - In-process measuring device for length & Ø - Dressing spindle for diaform roller - B-axis for swivelling grinding headstock - Second / Third External Loop Unit - Internal loop device - Upgrade to non-circular & thread grinding - Automatic door drive - suitable automation - Peak increase - u.v.m. on request / customer request
Press capacity: max. 45 t Pull force: max. 45 t Counter force in pressing position: max. 17 t Stroke of the punch: 175 mm Filling height: max. 140 mm Deduction: max. 85 mm Compression distance: max. 55 mm Top pressing: max. 15 mm Stroke rate: 9 – 26 min.-1 Motor: 7,4 kW Approx: 3000x1200x1800 mm Net weight: about 6000 kg
Rated power at 50%ED: 80kVA Short-circuit current: 35.9kA Electrode force: 100-600daN/DH Projection: 550mm --- Welding control: Filius classic 128 programs Machine control PLC Siemens S7-1200F --- Incl. additional options: - Double foot switch - Safety valve 2-channel - Pressure-free lowering of the upper fitting - Adjustment device - Forearm support - Flow monitor, electronic - Electrode power switch, electronic - Main switch --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock --- Further information on our homepage
Replacement welding controls for resistance welding machines MPS 100mono MPS 100monoR1 MPS 100multi MPS 100multiR1
Fully automatic stretch film packaging machine with scale & labeler Packing Plant / Wrapper + Labeler DIGI AW-5600 FX The AW-5600 FX is an automatic weighing, packaging and labeling system with high performance for ease of use and environmental friendliness. The packaging machine reduces the workload with easy and simplified operation. It protects film and label consumption through linerless labels in order to keep costs and environmental impact low. Goods such as cheese, meat or fruit and vegetables can be packaged easily and visually appealing. Technical data Wrapper DIGI AW-5600 FX 220-240V / 50-60 Hz / 1.8 kW suitable for Food-Tainer bowls Performance up to 17 packets/min Film width: 350 - 500 mm Year of construction: 2018 Total weight approx. 250 kg Digi marking system 3/6 kg, Min 20g, e=1/2g Calibrated until 31.12.2022 Function tested, ma ...
DAIKIN EWAD 100E-SL008 Brand:DAIKIN Type:EWAD 100E-SL008 Stock Number:M22-4590 Cooling capacity: 97.9 kW Number of fans:2 Refrigerant:R134a Refrigerant content: 18 kg Rated voltage: 400 Volt Power consumption:38.8 kW Motor power: 2x 0.78 kW Dimensions: 2165 x 1292 x 2273 mm Weight:1.751 kg Year of construction:2012 Quantity in stock:1 piece(s) Price on request Description: Nice air-cooled Daikin chiller with 1 screw compressor. This chiller is equipped with a switch box and a controller. Mentioned capacity at a water temperature of +12/7°C and an ambient temperature of +35°C. Also visit our website: used-refrigeration
Axial piston pump, E A10VSO 71 DFR/31R-PPA12N00, Rexroth, used Please note: This is an original Rexroth product and not a replica from Special offer! If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! The part comes from the spare parts warehouse of a certified production company and is in very good condition. DR 200 bar, 71cm³, 1500rpm, Drive shaft D32mm Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the buyer, the goods can be returned within 2 weeks. We will refund the buyer maximum the product price paid to us. For these goods we have to exclude warranty claims of the buyer for improvement, exchange, subsequent delivery or also for updating in case of digital compon ...
Jackdal trolley Overwrough sewing machine KL 759
Brake ring conical, 9v 532KB160, Demag, new Special offer! If you have a VAT number, we will be happy to issue you with an invoice without VAT. As good as new! The part comes from the spare parts warehouse of a certified manufacturing company, has never been used and is in mint condition. 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law applies without exception and court location St. Pölten.
BEING NEGOTIATED Sumitomo Demag 280 ton Systec SP 280/630-840 year of manufacture 2014 280 Ton Clamp 2800kn Tie Bar Dist 630 Injection unit 840 Made in Schwaig, Germany 400v 50hz Exworks South America
Used tank, Capacity:1000 Liter, 2 identical units available; Gross weight [kg]: 150
Qty. 1 Second-hand cast house for billet production incl. filtration system Mfc.: Gautschi, Mechatherm, Weishaupt, PEHAKA, FISONS, Dantherm Filtration GmbH Built: Unknown The machine is very strong design and still running well because it has been maintained always with original spare parts and qualified experts. Direct casting on a vertical table and make billets of 6'' and 8''. To make 9'' the tool of the table can be modified. The vertical caster can work with 9'' by remachining and modifying the tool table. 1 Melting and Tilting furnace GAUTSCHI, Capacity 20 T, Fuel Oil Burners The furnace has an elevator charging machine to load the scrap from the top of the furnace Degassing unit FILD from MECHATHERM England Nitrogen treatment and filtering 1 Vertical caster for billets 26 x 6’’ and 20 x 8’’ for useful log length 6 m 1 Homogenizing furnace, Fuel Oil Burners Weish ...
used
For sale second hand briquett press made by DIPIU. Completely renewed with overhauiln. Model MB 70. Price: 69.000 EUR EXW
Delta New Poluclean P30 Dust Extraction System Delta New Poluclean P30 Dust extraction system 400 V 5.5 kW 3500 m³/h 95 liters Weight: 361 kg Metrics: HxWxD = 300 x 100 x 97 cm Item location: 42859 Remscheid Dismantling and transport by the buyer. The dismantling, loading, as well as transport can alternatively be offered by us. Further extraction systems in other sizes - new and used - can be found in our shop! International shipping costs on request!
We offer a Doka Framax 270 wall formwork 334.66m² complete with accessories. The formwork has been cleaned, checked and is immediately ready for use. Partly new Finply formlining. Partly new accessories. Suitable for higher-value applications. SB 2/3 possible without any problems. New value Doka price list 2025/ 2026 = 264.019,00€ Special net price 94.915,00€ Pcs. Description 3 Framax Xlife element 2.40x2.70m new panel, Doka rental warehouse 5 Framax Xlife-Element 2.40x2.70m Doka rental warehouse 12 Framax Xlife element 1.35x2.70m new plate, Doka rental warehouse 38 Framax Xlife-Element 1.35x2.70m Doka rental warehouse 8 Framax Xlife-Uni-Element 0.90x2.70m Doka rental warehouse 5 Framax Xlife-Element 0.90x2.70m Doka rental warehouse 3 Framax Xlife-Element 0.90x2.70m Doka rental warehouse, new plate 8 Framax Xlife-Element 0.60x2.70m Doka rental war ...
DECKEL FP2 NC Dialog 11 Universal Milling Machine Milling Machine Travel X/300 Y/300 Z400 mm (340 mm for universal table in Z-axis) Speed infinitely variable 31.5 ... 5000 rpm Feeds 2-4000 rpm Rapid traverse 4000m/min Tool holder SK 40 Pinole stroke 80 mm Machine weight 1345 kg Main drive 5.5 kW Power consumption 11 kW The machine is currently being revised.
3× Briquette press Di Più MB100 – built in 2009 – complete line with saws & accessories For sale are 3 pieces of briquette presses of the type Di Più MB100, built in 2009, including saws, conveyor technology and other accessories. The machines come from industrial use and are ideal for the production of wood briquettes from sawdust, shavings and wood residues. ⸻ Technical data (per machine): Type: Di Più BRIK MB100 Year of Make: 2009 Briquette diameter: approx. 90 – 110 mm Production capacity: approx. 1,300 – 2,300 kg/h Press pressure: approx. 2,000 – 2,500 kg/cm² Main motor: 75 kW Total power: approx. 98 kW Material moisture: optimal 8 – 12 % Grain size: approx. 1 – 12 mm Weight: approx. 7,800 kg per machine Drive: hydraulic piston press ⸻ Equipment: Material hopper Screw conveyors Hydraulic Cabinets Saws for briquette length cutting ...
REF-2259 SOMME DIANA-363-VAC AUTOMATIC CAN SEAMER WITH 6 HEADS AND SOMME 21-VALVE VACUUM FILLING SYSTEM Automatic tin can seaming machine with 6 seaming heads. Fitted with a 21-valve vacuum filling unit. Manufacturer: SOMME. Model: Diana-363-VAC Output: 12-15,000 Cans/ hour Can size: Ø 73mm. Overall dimensions: length 4,200mm, width 2,000mm, height 2,200mm
maximum number of results exceeded
please refine your search
