double d used for sale

Stirred boiler / silo tank van der Molen 05-031/01, built 2006, in good used condition. Completely made of stainless steel, 2850 litres capacity, double-walled, heatable (steam), filling from above or with external pump from below possible. Dimensions B/T/H 190/160/420. Operating voltage 400 volts. More on request.

Depth: 1,000 mm/ Width: 2,870 mm/ Height: 938 mm The scope of delivery includes: 02x Workbench stand, used Material colour: grey Frame profile: 85 mm Stand height: 900 mm Stand depth: 1,000 mm Incl. cross and diagonal struts, base plates The stands are pre-assembled ( screwed truss ) 04x Workbench trusses, used Material color: yellow Box profile: 90 x 50 mm Truss type: SLB Design: Head crossbeam clear width: 2,690 mm 08x locking pins, used Finish: completely galvanized 01x Chipboard of second choice, used Thickness chipboard: 38 mm Chipboard width: 2,870 mm Depth chipboard: 1,000 mm Surface: coated if necessary (possibly in two parts) 01x Chipboard of second choice, used Thickness chipboard: 38 mm Chipboard width: 2,670 mm Depth chipboard: 1,000 mm Surface: coated if necessary (possibly in two parts) 16x self-drilling screws, new Version: galvaniz ...

AUTOMATIC BRIQUETTING machine type COMAFER DINAMIC 85N second hand machine volt. 380/50 CE mark : Yes briquett diameter mm. 60 production from 40 kg. to 85 kg. / hour motor power Hp 7,5 net weigth kgs. 850

We offer: 12 x Doka Framax 330 inner corner, overhauled, covered with new Finply formlining! Original value 1704,00€ with 65% discount á 596,40€/ piece + VAT. The elements are controlled and sorted. Suitable for higher-value applications SB3 Top condition! Offer only valid while stocks last, subject to prior sale! If you have any questions, please call 0049 176 70044689 Mr. Becker Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 Mobile: 0049 176 70044689 Mr. Becker Office/ Warehouse Address: Birkenstraße 15 89185 Humlangen- Hüttisheim E-mail: sfsystemst-online.de Register Court Ulm: HRA722943 VAT ID NUMBER: DE279047055

Doppstadt AK 635 Compact - Built in 2013 - Hours 4839 - Permissible total weight 25,000 kg - Mercedes Benz diesel engine 635 hp at 2,000 rpm - AD BLUE - Load-dependent control of the material feed incl. automatic scraper floor reversal - Separate drive of feed roller and scraper floor (twin drive) - Fuel tank 750 litres - Feed roller: length 1,690 mm, diameter 510 mm, with attached tooth segments - Auxiliary hydraulic connection 11 cm³ - Rear hinge: wheelbase 6,150 mm, - Scratching floor with 34 strips - Overbelt magnet -Radio remote control incl. transmitter, receiver, - Strainer basket Machine is overhauled and immediately available

Material width until 820 mm PET 12 to 20my OPP 15 to 75 my BOPP 12 to 75 my OPA 30 to 50 my Paper 45 to 110 g/m2 Composite foils with aluminium 40 to 250 my Composite foils without aluminium 40 to 250 my Main functions of the machine Previously used for priming and varnishing various plastic films and composites, also used after digital printing. Technical specification Unwinding Roll diameter Up to 1 000 mm Core diameter 76 and 152 mm Roll weight Up to 1 000 kg Side edge control FIFE DP-30 Web Guide Controller. Pre-treatment station Corona AHLBRANDT TG 3104-TP Gravure coating unit 2 coating carriages 1 for primer and 1 for varnish. For coating cylinders circumference 350 to 860 mm. Bale width 900 mm Some coating cylinders. With circulating air up to 120°C Dryer length 2 x approx. 2.2 m Thermo oil  ...

Year of construction: 1980 Running direction: Left – right Pitch: 95 mm Siemens S7 controller, Danfoss frequency converter With a stainless steel control cabinet. Equipped with 3 sets of parts for the following bottles: 0.5 l NRW, 0.5 l Euro, 0.25 l Ale, 0.33 l Ale & 0.75 l Gastro. Machine is CIP capable. With electric height adjustment. Modernization and service by arrangement. The machine is in good condition and still in operation. A visit is possible by arrangement Year of construction: 1980 Working direction: Left – right Pitch: 95 mm Siemens S7 control and a Danfoss frequency converter. Installed in a stainless steel switch cabinet. Equipped with 3 bottle guiding parts for: 0.5 l NRW, 0.5 l Euro, 0.25 l Ale, 0.33 l Ale & 0.75 l Gastro. Machine is CIP able. Height adjustment of the filler bowl and closing machine by electrical gear motor. Reconditioning /  ...

Consisting of: 1 Fully automatic depalletizer, Krones Palmaster 1 Fully automatic palletizer, Kettner Pressant duplex 1 Pallet magazine 1 Pallet control Pallet turning stations Pallet conveyors Protection fence Further information: Equipped for Euro-pallets. With Siemens S7 control. Year of construction: 1995 The line is currently in production. A viewing is possible. Composed of: 1 Fully automatic depalletizing, Krones Palmaster 1 Fully automatic palletizing, Kettner Pressant duplex 1 pallet magazine 1 pallet inspection Turning stations / corner converters Pallet transporters Protective fence Further information: Equipped for Euro pallets. With a Siemens S7 controller. Year of construction: 1995 The line is currently still in operation. A visit is possible by arrangement.

Carestream (Kodak) Direct view DR 9000 with the following system components: Generator Fischer Imaging Corp. DX 80 HF Tube Dunlee DU 404 0.6/1, 2_year of manufature 2004 1 x detector Trixell Pixium 4600_year of manufacture 2004 separate X-ray table • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipment in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • The sales take place as "used" to resellers or distributors, despite full functionality without warrenty/guarantee. • Installation and commissioning must only be performed by specialist staff with the appropriate qualifications.

GE Revolution XR/d with the following system components: Generator Jedi 80 tube MX 100 0.6/1.25 1 x detector 41cm 41cm separate mobile X-ray table company Zetta • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipment in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • The sales take place as "used" to resellers or distributors, despite full functionality without warrenty/guarantee. • Installation and commissioning must only be performed by specialist staff with the appropriate qualifications.

Used spiral mixer DIOSNA, type: SP 120 D - complete Ã?berholt- -for 120 kg of dough and 75 kg of flour -Spiral made of stainless steel -Boiler in stainless steel -2 time clocks -2 speeds -1 reverse Emergency stop switch -Condition: Very good Including delivery within Germany. The spiral mixer was reconditioned refurbished and is located in a very good condition. Inspection and testing according to arrangement.

Ideal for passage driving with consistent efficiency and for achieving the narrowest grain size distributions in the micrometer range, Maximum operational safety: even the basic version is designed in accordance with the explosion protection directive for installation in ATEX Zone 1 (ExII 2 G cb IIB T3) Grinding media sizes from 0.5–2.5 mm diameter Ideal cooling properties: The forced routing of the cooling water in the outer jacket allows the processing of temperature-sensitive productsEasy handling – each DYNO-MILL® KD can be dismantled in just a few simple steps Easy operation and adjustment of operating parameters Easy handling – any DYNO-MILL® KD can be dismantled in just a few simple steps Easy operation and adjustment of operating parameters Grinding tank: 5L Power : 12,5kW Voltage : 380V Weight : 450kg

Ideal for passage driving with consistent efficiency and for achieving the narrowest grain size distributions in the micrometer range, Maximum operational safety: even the basic version is designed in accordance with the explosion protection directive for installation in ATEX Zone 1 (ExII 2 G cb IIB T3) Grinding media sizes from 0.5–2.5 mm diameter Ideal cooling properties: The forced routing of the cooling water in the outer jacket allows the processing of temperature-sensitive productsEasy handling – each DYNO-MILL® KD can be dismantled in just a few simple steps Easy operation and adjustment of operating parameters Easy handling – any DYNO-MILL® KD can be dismantled in just a few simple steps Easy operation and adjustment of operating parameters Grinding tank : 50 litres Power : 45 kW Voltage : 380 V Weight : 1050kg

Dobot collaborative robot Cobot CR 16 - new Range: 1000mm Payload: 16kg Collaborative robot series Supports payloads of 3 kg, 5 kg, 10 kg and 16 kg Safe working on the side and cost-effective Hand guidance, collision detection and trajectory reproduction Ideal for application scenarios with human-robot collaboration Multiple control methods Low latency and high noise immunity Supports controls on Android, iOS, and Windows High-performance network card with a transfer rate of up to 433 Mbit/s Intelligent Interactive Panel Robot Hand Guide The Intelligent Interactive Panel is embedded with LEDs that indicate the status of the robot With the touch of a button, you can drag and move the robot to teach it a specific path Wide Compatibility Wide compatibility with a wide range of peripherals Suitable for feeding, assembling, testing, handling, screwing, grinding and gluing ...

Marine gear box MG 509 USED Ratio 4.17:1 and more ratio's in stock

Dobot collaborative robot Cobot CR12 - new Reach 1200mm Payload 12kg Axes 6 Collaborative robot series CR12 Cobot Improves Product Quality: The DOBOT CR12 series is equipped with interactive programming, convenient and easy to master. Quick to execute Improve the flexibility and production efficiency of your product line by setting up an easy-to-implement collaborative CR robot in 20 minutes and getting it up and running in 1 hour. Easy to make Our software and calculation technology make the operation and management of the CR collaborative robot series smart and easy. It can accurately mimic human actions by demonstrating the path. No coding skills are required. Compatible The CR collaboration robot series is recommended not only because of its comprehensive portfolio of end-of-arm tools, but also because of its universal communication interfaces. With multiple I/O ...

release agent spray unit Electr. connection: 400 V 3-ph, 16 A Compressed-air connection:6 bar, oil-free Working pressure:0,1-0,5 bar renovated

Dobot collaborative robot Cobot CR10 - new Range: 1300mm Payload: 10kg Collaborative robot series Supports payloads of 3 kg, 5 kg, 10 kg and 16 kg Safe working on the side and cost-effective Hand guidance, collision detection and trajectory reproduction Ideal for application scenarios with human-robot collaboration Multiple control methods Low latency and high noise immunity Supports controls on Android, iOS, and Windows High-performance network card with a transfer rate of up to 433 Mbit/s Intelligent Interactive Panel Robot Hand Guide The Intelligent Interactive Panel is embedded with LEDs that indicate the status of the robot With the touch of a button, you can drag and move the robot to teach it a specific path Wide Compatibility Wide compatibility with a wide range of peripherals Suitable for feeding, assembling, testing, handling, screwing, grinding and gluing  ...

Model L126TI No. of Cyl. L6 Aspiration TI Displacement (Liter) 11.1 Bore x Stroke (mm) 123x155 Output (ISO 3046, 8528 kW(ps)/rpm) 265(360) / 2000 - Dimension (L×W×H) 1235x855x1073 Dry Weight (kg) 1,060 Emission TIER-2

Specifications Classification L136 Cylinder L6 Aspiration NA Displacement (Liter) 8.1 Bore x Stroke (mm) 111 x 139 kW(ps)/rpm Heavy Duty 118(160) @ 2200 kW(ps)/rpm Medium Duty - kW(ps)/rpm Light Duty - Dimension (L×W×H) (mm) 1266 x 875 x 937 Dry Weight (kg) 743 Emissions Tier 1 Power Range (kW) 118 Speed Range (rpm) 2200 The value is based on Output (ISO 3046, 8528).

Roll forming system with 2 stations + prepare station for U-profile

Classification L136TI Cylinder L6 Aspiration TI Displacement (Liter) 8.1 Bore x Stroke (mm) 111 x 139 kW(ps)/rpm Heavy Duty 169(230) @ 2200 Dimension (L×W×H) (mm) 1364 x 911 x 937 Dry Weight (kg) 773 Emissions Tier 2 Power Range (kW) 169 Speed Range (rpm) 2200 The value is based on Output (ISO 3046, 8528).

Convolute (excerpt) from different tools - see picture

Cylinder mill for very fine grinding, consisting of three pairs of cylinders, new machinery, stainless steel construction, never been used, complete with product feeder, three electric motor and hydraulic control unit

Soldering table Ceramics: 340 x 390 mm Equipped with: 2 Gasfackels Weight: 300 kg Table Lxwxh: 2000 x 900 x 1750 mm

Kaeser DB130 15 kW

The scope of delivery includes: 30x gratings, used Material color: hot-dip galvanized Total depth: 990 mm (support rod direction) Total width: 1,195 mm (crossbar direction) Support rod diameter: 40/2.0 mm Frame height: 40 mm Mesh size: 100 x 100 mm Weight: approx. 11.07 kg | Pcs. Weight / pallet: approx. 360.00 kg Internal designation: L Note: - The frame was flanged inwards from all sides. - The gratings can be damaged, scratched, dented, Welding, etc. show. - The above price is only valid if a complete range of 30 pcs. General information about the item: This item is offered for pickup only. In addition, a desired transport or shipment of this article is with additional costs, which are charged separately depending on the place of delivery. or scope of delivery can be queried from us.

Complete with; push button magnetic starter and safety guards 220 Voltage

Clamping table of Dörries Diameter: Ã? 1600 mm Height: 1,000 mm Weight: 4.200 kg

The scope of delivery includes: 30x gratings, used Material color: hot-dip galvanized Total depth: 995 mm (support rod direction) Total width: 1,190 mm (crossbar direction) Support rod diameter: 40/2.0 mm Frame height: 40 mm Mesh size: 100 x 100 mm Weight: approx. 11.44 kg | Pcs. Weight / pallet: approx. 370.00 kg Internal designation: K Note: - The gratings can be damaged, scratched, dented, Welding, etc. show. - The above price is only valid if a complete range of 30 pcs. General information about the item: This item is offered for pickup only. In addition, a desired transport or shipment of this article is with additional costs, which are charged separately depending on the place of delivery. or scope of delivery can be queried from us.

Storage Tank / Beer Tank/ Pressure Tank in AISI 304 Operating pressure: 0,99 bar , Test pressure: 1,7 bar Material: V2A - AISI 304, 1.4301 Surface: inside and outside 2B=IIIC Top Bottom: with pressure lid 390 mm with 1 x thread connection DN 50 with 1 x overpressure valve with 1 x CO² connection with 6 x screws with 10 x reinforcing rings for better pressure resistance Lower Bottom: with outlet DN 50 with butterfly valve on 4 stable feets can be moved from all sides with a forklift / truck pallet Diameter: 1000 Total height: 1740 Zyl. Height: 900 Weight: 135

Scholz Steam Autoclave Year 1979 7 bar pressure Internal dims: 1.5m diam. x 2.6mm long Temperature 150deg C 10 x steam connectors Indirect steam Full rail system Machine overhauled 2016/17 Full safety certification available Complete with control panel

Qty. 1 Second-hand bar and wire rod production plant Mfc.: Sarralle, Danieli, ABB, Indar Built: 1990’s, 2000, 2005, 2007, 2010 Revamped: 2008 Capacity: 1,100,000 T/annum Entry material: Scrape Semi product: Billets Size: 130x130 mm or 140x140 mm Length: 8 – 13 m Reinforced Bars: Dia.: 8 - 40 mm Length: 6 – 12 m Rebars: Dia.: 8 - 16 mm ID: 850 mm OD: 1100 – 1250 mm Height: 800 mm Wire Rod: Dia.: 5.5 – 14 mm Scope of supply: Scrap Transportation Machines EAF Ladles Furnace Continuous Caster Billet Reheating Furnace 23 Rolling Mills (Dia. 8-10 mm) 21 Rolling Mills (Dia. 12-32 mm) Wire Rod Mill Flying Shears (2) Spooler Line Cooling beds (2) Cranes Transformes Spare Parts

We offer a Doka Framax Xlife plus 163.67m² with a 65% discount. Original value: €112,280.00 - Special net price €39,298.00 + VAT Complete with accessories on request. Formwork completely cleaned, checked and sorted. Formlining exposed concrete class 2/3 possible without any problems. Ready to use, suitable for higher-value operations. Piece designation 1 Framax Xlife plus Element 2,70x3,30m 8 Framax Xlife plus Element 1,35x3,30m 8 Framax Xlife plus Element 0,90x3,30m 6 Framax Xlife plus Element 0,75x3,30m 5 Framax Xlife plus Element 0,60x3,30m 2 Framax Xlife plus Element 0,55x3,30m 17 Framax Xlife plus Element 0,45x3,30m 1 Framax Xlife plus Element 0,30x3,30m 4 Framax Xlife plus-Element 1,35x2,70m 2 Framax Xlife plus-Element 0,90x2,70m 1 Framax Xlife plus-Element 0,75x2,70m 6 Framax Xlife plus-Element 0,60x2,70m 2 Framax Xlife plus-Element 0,55x2,70 ...

JAROMA DYFD-2 combined milling machine/saw Product name: Milling machine Type: DYDF-2 Manufacturer: JAROMA (Poland) Machine number: 3814 Year of construction: 1982 Condition: used, checked Technical details: - Spindle diameter: 25 mm - usable height (spindle height): 110 mm - Spindle inclination: 5° in both directions - Table dimensions: 1,120 x 750 mm - 2 x suction nozzles, diameter 100 mm - 1 x additional 380 V connection for a feed - Spindle height and inclination can be adjusted manually - removable drawer for cleaning - Machine dimensions (set-up) L x W x H): 1,120 x 830 x 1,100 mm Engine data: - Voltage: 380 V - Frequency: 50 Hz - Power: 3.8 / 3.0 kW - Speeds: 2,900 / 1445 rpm (2 speeds) Transport dimensions (L x W x H): 1,200 x 840 x 1,220 mm (on EURO pallet) - Number of packaging units: 1 - Weight: approx. 700 kg The machine has been overhauled  ...

Qty. 1 Second-hand pulp moulding plant Maker: DongJin MP Tech Model no.: DPF 70-85 S2 Built: 2007 Dry type pulp moulding machine Quantity: 4 units Condition: can be inspected in dry running Three step way: heating /pressing/vacuum dry -Platen size: 700 x 850 mm -Dimensions: 1300(W) x 3200 (L) x 4000(H) mm

P119 - used approx. 28.8 m³ / 28,800 litres GF-UP tank / plastic tank, double-walled, flat bottom tank, in good condition. technical details: capacity: approx. 28.8 m³ / 28,800 litres material: double-walled GF-UP tank manufacturer: Formoplast dimensions: Ø approx. 3.0 m x total height approx. 4.5 m certification mark: PA-VI 312.002 (DIBT examination report not available) specific weight: 1.4 kg / L Used storage tank in good condition. The hull will be newly painted in dark green. Double-walled flat bottom tank, aboveground storage tank with various connections such as ventilation, feed, etc., lid on the roof. According to the age, traces of use are present. For media with a specific weight of up to 1.4 kg/L, the tank formerly contained iron(II) chloride. This container can be used as a storage tank for liquid feed, water, whey and many different media. Pric ...

Machine type: TIG inverter welding system gas-cooled direct current system Make Eurotronic Type TIG 1501 - DCi Connection voltage 1 x 230 volts Setting range 5 – 150 amps Duty cycle 35 % d.c. at 150 amps 60% d.c. at 120 amps 100% d.c. at 100 amps Current adjustment infinitely variable max. weldable material thickness 4 mm Cooling inverter by built-in fan Cooling burner gas-cooled Portable assembly line design Fuse 16 amps Dimensions L x W x H 400 x 170 x 250 mm Weight 9 kg Age approx. 10 years Condition workshop-tested, very good, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece ME-TIG burner TH 161 G, 4 m 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box cpl. Equipped 12 Months Warranty 1 Piece Instruction Manu ...

Material: Stainless steel 1.4571 Drive: 15 KW / 400-4000 RPM Weight: 1100 kg Mixer: Turbulent - mixing plant Speed mixing plant: approx. 400-4000 RPM Operating voltage: 400 V Control voltage: 230 V Frequency: 50 Hz Protection class: IP 54; Additionally available: --> Cabinet --> Documentation.

Durchlauf - Schneidegatter, Fabr. Delta

The Trivac D65B rotary vane vacuum pump is: absolutely as good as new checked according to the manufacturer's specifications, so that all games and dimensions are in the tolerances equipped with new wear parts Available at short notice includes one year warranty After refurbishing, our Leybold Trivac D65B Rotary Vane Pump wants: be good as new be checked after the manufacturer's specifications, for example its tolerances be fitted with new wear parts be available at short notice included one-year warranty

Block vane vacuum pump LEYBOLD DK200 is after the overhaul: absolutely mint condition According to manufacturer specifications verified so all games and mass in the tolerances are with new wear parts available at short includes one year warranty LEYBOLD DK200 rotary piston pump pumps will: be good as new be checked after the manufacturer's specifications, for example its tolerances be fitted with new wear parts be available at short notice included a one-year warranty