double d used for sale

x-travel: 500 mm y-travel: 400 mm z-travel: 400 mm Control: Heidenhain TNC 310 tool taper: SK 40 speeds: 20-4500 U/min weight of the machine ca.: 3 t dimensions of the machine ca.: 2,15 x 2,00 x 2,50 m Equipment/accessories: -swivel rotary table -documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tea biscuit cutter / pastry harp Dedy Year of manufacture not known Made entirely of stainless steel or aluminium, Dimensions: approx. 42 cm width, 50 cm depth and 10 cm height

x-axis: 10.100 (2x 5.000) mm y-axis: 3.000 mm z-axis: 1.500 mm Control: Sinumerik 840 D Siemens distance between columns: max. 3.000 mm passage: max. 1.950 mm distance spindle center to table: max. 1.800 mm distance spindle nose and table: 1.350 / 1.500 mm Main spindle:: type: P 8005020/00-4 turning speed range - main spindle: max. 18.000 min/-1 power capacity - main spindel: 20 kW max. Torque: 48 Nm tool taper: HSK-A63 DIN 69063 Spindle Extension: 450 mm swivellable: B: +110° / -10 ° rotatable: C: +/- 200 ° Main spindle:: type: P 8002320/00-4 turning speed range - main spindle: 20 - 5.000 min/-1 power capacity - main spindel: 40 kW max. Torque: 1.100 Nm tool taper: HSK-A100 DIN 69063 Spindle Extension: 300 mm swivellable: B: +110° / -10 ° rotatable: C: +/- 200 ° work table:: table surface area: 4.000 x 2.200 (2x) mm max. table load: 12 / 20 t height over floor: 700 mm number of ...

Doubrava silo system, consisting of 2 silos 3200 mm diameter and usable volume of 65 m³.

Direction of rotation - housing position LG 0 Operating temperature 20° C Density 1.2 kg/m³ Flow rate 3,600 m³/h Total pressure increase 3947 Pa Speed 2,950 min-1 max. operating temperature 40° C Motor rated power 7.5 kW Voltage 400 V Frequency 50 Hz Weight approx. 218 kg

KVM 105x125 Block/Paving stone plant complete 2005. KVM computer control, palletizer system, 2 elevators 18 levels, curing rack system 18 levels, Finger car for wet and dry side, 2300 boards, board turner/stacker, plastic wrapper unit, Haarup 2500 batching plant, Face mix, colour system, 3 Cement silos, Euro pallet dispenser.. The plant is in very good condition and can be seen after appointment. (Video is available) SUPER PRICE! Amexpo Consult, Merkurvej 31, 9370 Hals Denmark Phone: +45 29251017.

control: FANUC 21i-TB Control x-axis: 390 mm z-axis: 780 mm spindle taper: A2-11 number of spindle speeds: 2000rpm engine output: 37 kW weight of the machine ca.: 9000 kg dimensions of the machine ca.: 1905,0 × 2720,0 × 3260,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A used electric deck oven Wachtel Piccolo I-4 with 4 shelves each 80x60cm is functionally tested for sale and immediately available. The oven is equipped with exhaust hood and proofer. Shipping costs on request. Deck Oven Quail Piccolo I-4 DMS 3 Master EM Timer K - 4 shelves each 80x60cm - Each floor with separate controls - Top and bottom heat can be controlled separately - Each floor with separate steam box for the generation of steam - with automatic night start function - with exhaust hood - Stove with water connection for steam - Height is adjustable - 19.3 kW - Voltage: 400V AC/3Ph/N/PE/50Hz - Year of construction 10 / 2010

FULL WEIGHING AND BAGGING LINE - EXCELLENT CONDITION FULLY WORKING COMPLETE WITH STAINLESS STEEL GANTRY, INCLINE FEED CONVEYOR AND OUTFEED CONVEYOR GEA SMART PACKER GX250H - VERTICAL FORM FILL SEAL BAGGER 250MM JAW MACHINE NO: 12330 YEAR: 2017 WEIGHT: 950KG 415V MULTIPLE TUBE SETS ISHIDA MULTIHEAD WEIGHER MODEL: CCW-RVE-216B-10/15-SS MACHINE NO: 560012161 16HEAD YEAR: 2017 240V WEIGHT: 535KG PLEASE DO NOT HESITATE TO CONTACT FOR MORE INFORMATION

Center height: 400 mm Center width: 1250/1300 mm Circumferential Ø: over bed 440 mm Spindle bore: Spindle holder: Pick-up cone tailstock: 5 MK Spindle speeds: 11.2 - 2240 rpm Feeds: longitudinal/flat 0.1-2.8/0.05-1.4 mm/rev Thread pitches: Electrical connection: 380 V, 11 kW Space requirement: 3400 x 1400 x 1300/1700 mm Weight: approx. 2700 kg

SINGLE MULTIHEAD WEIGHER FEEDING - 2XBAGGERS MACHINES ONLY WITH TWIN OUTFEED CONVEYORS - NO GANTRY ISHIDA MULTIHEAD WEIGHER MODEL: CCW-RS-216B-2D-30-SS YEAR: 2011 16 HEAD ILAPAK TWIN BAGGERS YEAR: 2011 MODEL: VEGATRONIC 500 300MM JAW

PART NUMBER: 7518 Specifications: - shaft width 810mm - number of knives 4 pcs - max thickness of the workpiece 250mm in advance: -Triggers - toothed insertion shaft, pulling shaft -Clamps - planing roller -Clamps - smooth, pulling outfeed shaft from below: - adjustable rollers in the bottom top 2 pcs - 7.5kW motor - electric lifting of the table top - 0.5kW lifting motor - 4 types of feed speeds -brake - extraction spigot diameter 160mm - dimensions length/width/height 1350x1450x1700mm - weight about 1100kg ADVANTAGES – Polish production – electric lifting of the table top – used thicknesser, very good condition Net price: 25900 PLN Net price: 6023 EUR depending on the price of 4.30 EUR (Prices may change with higher fluctuations)

x-travel: 2.600 mm y-travel: 700 mm z-travel: 700 mm Control: SIEMENS SINUMERIC 840D table-size: 2.900x700 mm table weight: 2.150 Kg tool adaptor: SK 40 DIN 69872 workpiece length - max.: 300 mm workpiece weight: 6 kg workpiece dia.: 80/130 mm : 30 fach main drive: 18,4/14 kW speed: 14.000 mm/min rapid traverse: 40 m/min feed: 40 m/min Machine on: 18.859 h Spindle hours: 5.666 h internal coolant system feed: 40 Bar/600 l Chip coveyor: inkl. total power requirement: 55 kW weight of the machine ca.: 14.520 kg dimensions of the machine ca.: 10.280 x 7.230 x 3.042 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Fully automatic continuous system, 30cm belt width with hold-down belt and additional belt insert with turning station Frying length 2.35m with digital control for 7 different programs Bandgesch, adjustable mobile with fully automatic quark ball station with additional jolting for wreaths mobile tested and cleaned Immediately available from stock

Mixer Falterbaum type FAMIX 30.000 Turbo Digi More components mixer Year of manufacturing: 1993 with Siemens S7 PLC Incl. touch panel Completely mounted on stainless steel base frame Incl. measurement and control technology for CO2 Output maximum 30,000 ltr. /h 5-component mixer

Non-automatic scale as platform scale, accuracy class III, approval T8029, weighing range 1 kg - 150 kg, calibration value 50 g Manufacturer No. B147482290, Type T32XW Platform 650x500 mm Weighbridge and tripod stainless steel Base: Lacquered steel, WZ IP 67 Display in stainless steel housing IP65 Power supply

Refer to code 1148 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Key data: 530 KW, 400 V

MAN 140-730kWe CHP or power generation only application. 0! hours. NEW

HF MIXING GROUP, FRANCIS SHAW, POMINI. Chamber/Drilled Sides: GK250-K6A-K5-VIC275-11D. Refer to code 1117-1118-1119-1120-1148 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

x-travel: 600 mm y-travel: 400 mm z-travel: 400 mm control: MSX 501 Mori Seiki work table:: table surface area: 700 x 450 mm max. table load: 350 kg number of T-slots: 4 T-slot - width: 18 mm T-slot - distance: 100 mm Main spindle: Number of revolutions: 12.000 U/min power capacity - main spindel: 18,5 / 15 / 11 kW tool taper: BT 40 max. Torque: 110,5 Nm diameter of forward milling spindle bearing: 70 feeds: rapid travel x/y/z: 20.000 mm/min feed speeds: 1 - 20.000 mm/min Tipp feed: 15 Steps / 0 - 1.260 mm/min Tool-Presetter:: Number of Toolpositions in magazine: 40 Pos. Max. mould width: 80 mm max. tool-dia with free toolbox: 125 mm max. tool length: 250 mm max. tool weight: 8 kg change-time chip to chip: 2,8 sec change-time tool to tool: 1,0 sec total power requirement: 34 kVA weight of the machine ca.: 7,2 t dimensions of the machine ca.: 2,8 x 3,0 x 2,9 m Documents: Chip conveyo ...

Dough machine Diosna Model: SP 24 D 2 timers & 2 speeds Flour dust hood for max. 24 kg dough Spiral mixer with return button Machine mobile with brake DGUV V3 tested Connection 400V, 2.2 kW, 5.0A, 16A-CEE plug Used machine overhauled with 6 months warranty Option: Maintenance contract Service Package Delivery Instruction & Commissioning Many more spiral mixers in stock!

Michael Deckel S0E Stylus Tool Grinding Machine, SOE Weilheim TOP Condition Total weight approx. 90kg Top grinding wheels with an outer diameter of up to max. 100mm are used Absolute top condition! Only one overhauled machine has a slightly superficial patina the bare metal parts. The pictures speak for themselves. The workshop dream in Reseda green :-) Plug with phase inverter

Spiral mixer Diosna Model: SP 160 D Dough machine with 2 courses, 2 clocks Stainless steel boiler + stainless steel spiral Flour dust cover Rewind button for max. 100/160 kg flour/dough depending on the TA Machine Mobile with 2 brakes Connection 400V, 16A, 32A-CEE plug DGUV V3 tested Used machine overhauled 6 months warranty Option: Maintenance contract Warranty 9 months E-Box Service Package Delivery Instruction & Commissioning We have many more TOP spiral mixers in stock!

Spiral mixer Diosna Model: SP 120 D kneading machine mobile with brake, 2 timers, 2 gears, Stainless Steel Boiler and Spiral Dough machine with return button Flour dust hood in silo design for max. 120 kg dough, ( depending on TA ) DGUV V3 tested Dimensions: 800 x 1270 mm WxD Connection: 400 V, 11A, 32A-CEE plug Used machine overhauled 3 months warranty Option: Maintenance contract Service Package Warranty 6 months Delivery Instruction & Commissioning We have a wide range of spiral mixers in stock!

Spiral mixer Diosna Model: SP 120 F /T Dough temperature display kneading machine mobile with brake, 2 timers, 2 gears via program control Stainless Steel Boiler and Spiral Dough machine with return button Flour dust hood, 180 litre boiler for max. 120 kg dough yes according to TA DGUV V3 tested Dimensions: 800 x 1350 mm WxD Connection: 400 V, 8 kW, 18A, 32A-CEE plug Used machine overhauled with 6 months warranty Option: Maintenance contract Service Package E-Box Truck Delivery Instruction & Commissioning You can find more spiral mixers in our large warehouse!

Spiral mixer Diosna Model: SP 120 D kneading machine mobile with brake, 2 timers, 2 gears, Stainless Steel Boiler and Spiral Dough machine with return button Flour dust hood in silo design for max. 120 kg dough, ( depending on TA ) DGUV V3 tested Dimensions: 800 x 1270 mm WxD Connection: 400 V, 11A, 32A-CEE plug Used machine overhauled 3 months warranty Option: Maintenance contract Service Package Delivery Instruction & Commissioning We have many more TOP sipral kneaders in stock!

Diosna Spiral Mixer Model: SP 160 AD with 2 extendable tank cars Kneading machine for max. 160 kg dough depending on TA Cover with switch ring with 2 timers and 2 gears Lifting and lowering via control Connection 400V, 9.7 kW, 22.2 A., 32A-CEE plug DGUV V3 tested Used machine overhauled with 6 months warranty Option: Maintenance contract Service Package Delivery & Floor Fastening Instruction & Commissioning Many more spiral mixers in stock!

Diosna Spiral Mixer Model: SP 160 D Dough machine with 2 courses, 2 clocks Stainless steel boiler + stainless steel spiral Flour dust cover Rewind button for max. 100/160 kg flour/dough depending on the TA Machine Mobile with 2 brakes Connection 400V, 16A, 32A-CEE plug DGUV V3 tested Used machine overhauled 6 months warranty Option: Maintenance contract E-Box Service Package Delivery Instruction & Commissioning Visit our large spiral mixer exhibition!

Spiral mixer Diosna Model: SP 160 D Dough machine with 2 courses, 2 clocks Stainless steel boiler + stainless steel spiral Flour dust cover silo version Rewind button for max. 100/160 kg flour/dough depending on the TA Machine Mobile with 2 brakes Connection 400V, 20A, 32A-CEE plug DGUV V3 tested Used machine overhauled 3 months warranty + service Option: Maintenance contract E-Box Service Package Delivery Instruction & Commissioning You can find more TOP spiral mixers in our large exhibition!

Diosna Spiral Mixer Model: SP 120 kneading machine mobile with brake, 2 timers, 2 gears, Stainless Steel Boiler and Spiral Dough machine with return button Flour dust hood in silo design for max. 120 kg dough, ( depending on TA ) DGUV V3 tested Dimensions: 800 x 1270 mm WxD Connection: 400 V, 6.5 kW, 15.8A, 32A-CEE plug Machine 3 months warranty Option: Maintenance contract Service Package Instruction & Commissioning Delivery Many more spiral mixers in stock!

Treif Diskus Smart Circular Knife Machine Stainless steel version Max. 130 slices per min. Knives newly sharpened and coated Manual operation via rotary control Disc thickness adjustable from 4 - 24 mm Dimensions: 650 x 690 x 1100 mm, WxDxH Bread dimensions max: 300 x 200 x 160 mm LxDxH DGUV V3 tested Connection 400V, 16A-CEE plug Used machine cleaned and function-tested 3 months warranty Many TOP bread slicers in stock!

GeneralUniversal machining centre; Control: Siemens 840D-Powerline ShopMill Classic Technical DataRapid traverse longitudinal/transverse/vertical60/60/60 m/minFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minWorking area 1Longitudinal1250 mmCross1000 mmVertical1000 mmMiscellaneousClamping SystemHSK-A 63 Tool changerType of magazineChain ApplicationUniversal Tool changer planehorizontal Type of gripperDouble gripper Automatic swivel milling headUniversal head: automatic changeover from vertical to horizontal machiningProd. package 40 bar/23 l/minProduction package 40 bar/23 l/min / 580 psi/6 gallon/min (theoretical pump performance) tank 900 l, rotating clear-view window, scraper flight conveyor coolant through spindle centre form ADNC rotary table with pallet changerType of Measuring system Direct measuring systemTable surface 1000 x 800 mmTool magazine,chain, 60 pockets ...

GeneralUniversal Milling Machine Stealth Design; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal550 mmCross450 mmVertical420 mmTechnical DataFeed rate longitudinal/transverse/vertical30000/30000/30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/mininlineMASTER® spindlespeed range 20 - 15.000 min-1Drive power (100% DC) 14,5 kWDrive power (40% DC) 20,3 kWSpeed range 20 - 15000 rpmTorque (40% DC) 121 NmTorque (100% DC) 84 NmSpindle taper HSK-A 63Clamping System HSK-A 63Tool clamping for HSK-A63Tool clamping HSK-A63 according DIN 69893 (incl. adaptation working spindle and tool magazine)NC swivel rotary tableSwivel Rotary Table for simultaneous machining Clamping surface dia. 505 x 500mm / 19.9 x 19.6 in swivel range -35 to +110°, rotary axis 360° including direct measuring system for B- and C-axis and working plane transformationTool magazine 60 ...

GeneralUniversal Milling Machine Stealth Design; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal550 mmVertical420 mmCross450 mmTechnical DataFeed rate longitudinal/transverse/vertical30000/30000/30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/mininlineMASTER® spindlespeed range 20 - 15.000 min-1 SK40 suitable for BIG-PLUS® toolsDrive power (100% DC) 14,5 kWDrive power (40% DC) 20,3 kWTorque (100% DC) 84 NmTorque (40% DC) 121 NmSpeed range 20 - 15000 rpmSpindle taper SK40 Tool holder DIN ISO 7388-1-AClamping System DIN ISO 7388-3-A, ADToolchanger with set up station for tool loadingNumber of tools 30NC swivel rotary tableSwivel Rotary Table for simultaneous machining Clamping surface dia. 505 x 500mm / 19.9 x 19.6 in swivel range -35 to +110°, rotary axis 360° including direct measuring system for B- and C-axis and working plane transformat ...

GeneralUniversal Milling Machine Stealth Design; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal550 mmCross450 mmVertical420 mmTechnical DataFeed rate longitudinal/transverse/vertical30000/30000/30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/mininlineMASTER® spindlespeed range 20 - 15.000 min-1 SK40 suitable for BIG-PLUS® toolsDrive power (100% DC) 14,5 kWSpeed range 20 - 15000 rpmTorque (40% DC) 121 NmTorque (100% DC) 84 NmDrive power (40% DC) 20,3 kWSpindle taper HSK-A 63Clamping System HSK-A 63Tool clamping for HSK-A63Tool clamping HSK-A63 according DIN 69893 (incl. adaptation working spindle and tool magazine)NC swivel rotary tableSwivel Rotary Table for simultaneous machining Clamping surface dia. 505 x 500mm / 19.9 x 19.6 in swivel range -35 to +110°, rotary axis 360° including direct measuring system for B- and C-axis and working p ...

GeneralUniversal Milling Machine Stealth Design; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal550 mmCross450 mmVertical420 mmTechnical DataFeed rate longitudinal/transverse/vertical30000/30000/30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/minIntegrated motor spindle speedMASTER®Drive power (100% DC) 25 kWDrive power (40% DC) 35 kWSpindle taper SK40Speed range - 20000 rpmTorque (40% DC) 130 NmTorque (100% DC) 86 NmClamping System DIN ISO 7388-3-A, ADToolchanger with set up station for tool loadingNumber of tools 30NC swivel rotary tableSwivel Rotary Table for simultaneous machining Clamping surface dia. 505 x 500mm / 19.9 x 19.6 in swivel range -35 to +110°, rotary axis 360° including direct measuring system for B- and C-axis and working plane transformationChip removal package with cabin roofSwarf removal package chip conveyor Coolant - ...

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsSpeed max.12000 rpmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWTable surface850 x 650 mmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)4th Axis package4th Axis package Option includes: - rotary table type EA-510.L NE with indirect measuring system - electrical and pneumatic preparation - software preparation to work with rotary table - cycle TRACYL which allows to define contour on the cylinder - swSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic Handwhe ...

CharacteristicsTable surface850 x 650 mmWeight approx.5600 KgRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmDimensions (L x W x H)3,07 x 2,67 x 2,84 mGeneralVertical Machining Center; Control: Control SIEMENS 828D Mechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)4th Axis package4th Axis package Option includes: - rotary table type EA-510.L NE with indirect measuring system - electrical and pneumatic preparation - software preparation to work with rotary table - cycle TRACYL which allows to define contour on the cylinder - swSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic Handwhe ...

GeneralTwo spindle Swiss turning automatic lathe; Control: Fanuc 310is Working areaBar diameter max.42 mmChanging kit from steady to sliding headstockChanging kit from steady to sliding headstock including application bush type Dunner B236 and bush-spindle syncronismDrive for support for back workingDrive for support for back working operation (slide 2) power 0.55 KWAxial drilling unit for back work.oper.Axial drilling unit for support for back working operation (slide 2) with 2 rot.spindles, junction for collet ESX/ER 20 and 2 cyl.junction diam.25mmDouble tool h. for ext.machining on rev.Double tool holder for external machining on revolver for shaft 16x16Double drill hold. on rev.cyl.junct.d.25Double drill holder on revolver with cyl. junction diam.25mmRad.driven mill.-drill.unit on rev.Radial driven milling and drilling unit on revolver with junction for collet ESX/ER 20 ratio 1:1 sp ...

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)4th Axis package4th Axis package Option includes: - rotary table type EA-510.L NE with indirect measuring system - electrical and pneumatic preparation - software preparation to work with rotary table - cycle TRACYL which allows to define contour on the cylinder - swSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic Handwhe ...

GeneralCNC Swiss type lathe with Fanuc control; Control: FANUC 310 iTB Working areaTurning diameter33 mmSpecial equipmentHinged belt chip conveyor with Discharge height 1200 mm Aut. bar feeder IEMCA BOSS 545/32 E, max_ L=3200 mm, incl. guide channel diam. 18 mm

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsSpeed max.12000 rpmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsTorque (100% DC)57 NmMax. torque83 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWTable surface850 x 650 mmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)4th Axis package4th Axis package Option includes: - rotary table type EA-510.L NE with indirect measuring system - electrical and pneumatic preparation - software preparation to work with rotary table - cycle TRACYL which allows to define contour on the cylinder - swSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic Handwhe ...

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)4th Axis package4th Axis package Option includes: - rotary table type EA-510.L NE with indirect measuring system - electrical and pneumatic preparation - software preparation to work with rotary table - cycle TRACYL which allows to define contour on the cylinder - swSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic Handwhe ...

x-travel: 640 mm y-travel: 600 mm z-travel: 500 mm control: Siemens 840 D total power requirement: 19 kW weight of the machine ca.: 8 t dimensions of the machine ca.: 5 x 4 x 3 m No. 5312: Vertical machining center DECKEL MAHO type DMC 64 V linear year of construction 2007 Siemens 810 D Shopmill Working area: 640 x 600 x 500 mm Drive power: 13/19 kW Equipment: Table 850 x 600 mm ( WITHOUT the clamping devices shown ) Preparation 4th axis Production package / IKZ 40 bar: BFA 600 cooling lubricant cleaning system Integrated spiral chip conveyor Separate scraper belt chip conveyor documentation Miscellaneous: Spindle ISO 40 Speed range 1-12,000 min-1 Space requirement see sketch Transport dimensions approx. 6.5 loading meters Weight approx. 8.8 tons The machine is ready for operation with wear and tear due to age and use. Short video: https://www.youtube.com/watch?v=sDkgx4BYXeY Special pric ...

CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgGeneralVertical Machining Center; Control: Control SIEMENS 828D Mechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)4th Axis package4th Axis package Option includes: - rotary table type EA-510.L NE with indirect measuring system - electrical and pneumatic preparation - software preparation to work with rotary table - cycle TRACYL which allows to define contour on the cylinder - swSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic Handwhe ...

x-travel: 2000 mm y-travel: 1000 mm z-travel: 1000 mm Control: Heidenhain type: TNC 430 : spindle turning speed range: 15-1450 U/min Table area: 2300x1200 mm Spindle: 200 mm spindle stroke: 200 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Nr 3762 Maschine wurde überholt machine is retofit The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsTable surface850 x 650 mmRapid feed X / Y / Z24/24/24 m/minDimensions (L x W x H)3,07 x 2,67 x 2,84 mMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)4th Axis package4th Axis package Option includes: - rotary table type EA-510.L NE with indirect measuring system - electrical and pneumatic preparation - software preparation to work with rotary table - cycle TRACYL which allows to define contour on the cylinder - swSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Air coolant external and internalAir coolant ex ...

x-travel: 2.200 mm y-travel: 560 mm z-travel: 720 mm control: iTNC 530 Heidenhain turning speed range - milling: 20 ~ 12.000 U/min power capacity - milling spindle: 35 / 25 kW tool taper: SK 40 tool piece magazine with: 100 pos. table surface area: 2.600 x 600 mm rapid traverse X-axis: 100 m/min rapid traverse Y-axis: 50 m/min rapid traverse Z-axis: 50 m/min max. tool diameter: 80 mm max. tool-dia with free toolbox: 130 mm max. tool length: 300 mm max. tool weight: 6 kg max. table load: 2.200 kg total power requirement: kW weight of the machine ca.: 12 t dimensions of the machine ca.: 7,0 x 4,2 x 2,7 m Chip conveyor: Coolantsystem: interface 4. axis: 4. axis: 560 mm Seperating wall: oil mist extraction: Tailstock: 350 mm / MK 5 elektr. hand wheel: through spindle coolant: 40 bar Travelling column milling machine DECKEL MAHO - DMF 220 Linear - new spindle installed (April 2024) - in ...

GeneralHSC-Precision Centre - Active chiller for main spindle and linear drives - Active chiller for electrical cabinet - Direct absolute measuring system with air purge - Coolant-airblast changeover - MPC (Machine Protection Control); Control: 3D-control Heidenhain iTNC 530 HSCI Technical DataSpindle taperHSK-E 50 Feed rate longitudinal/transverse/vertical1-80000/1-80000/1-80000 mm/minRapid traverse longitudinal/transverse/vertical80/80/80 m/minWorking area 1Cross580 mmLongitudinal450 mmVertical460 mmTool changerType of magazineChain ApplicationVertical Type of gripperDouble gripper Number of tools30 Rigid tableRigid table, clamping area 460 x 600 mm / 18,11 x 23,62 inch Loading weight max. 600 kg / 1322 lbsSpindle speed up to 40,000rpm with Shaft CoolingSpindle speed 20 up to 40,000 rpm within shaft cooling for tool taper HSK-E50 DIN 69893 AC-Main drive with 19,5/15 kW (100/40%DC) 14,5 ...

faceplate diameter: 3200 mm swing diameter: 5100 mm turning height: 2505 mm cross rail - adjustment: 1500 mm max. ram stroke: 1250 mm slide adjustment: 2000 mm control: Siemens 8 T tool changer: 16 STK table load: 60 t faceplate turning speed range -stepless-: 0,8-100 U/min feed: 0,0 1-1000 mm/min rapid traverse: 6000 mm/min drive of main spindle: 75 kW weight of the machine ca.: 70 t dimensions of the machine ca.: 9,3 x 6,1 x 6,0 m machine is in an excellent condition with div. acessories (photos available) machine can be equipped with latest electrics and Siemens CNC control SINUMERIK 840D sl for additional costs. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.