double d used for sale

ID3448 Demag 3160 – Challanger year/Baujahr 2012 6900 hours/hours, 118.000 km 50 m mast, crane completely overhauled 50 m mast, crane completely overhauled

- Cylinder head for Deutz 440 - K - New and original packaging - stored in a dry place - Manufacturer quality

Dematic conveyor system Accumulating roller 24000-500-440 RA2346 The roller conveyor shown does not correspond exactly to the illustration in the advertisement, but is the same model and is in the same condition. Only the dimensions differ. Further information Manufacturer: Dematic Type: Accumulating roller conveyor Year of construction: unknown Conveyor length (FL): 24000 mm Condition: good (used) Roller width (RB): 440 mm Nominal/outer width (NB): 500 mm Accumulation slot size: 700 mm Stowage slot control: Plug and Play, electro-pneumatic Roller pitch: 125 mm Drive types: SEW Eurodrive head drive Conveying speed: approx. 0.5 m/s Optionally available e.g: Frequency inverter for stepless speed control Supports Side guides Price: net plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: condition: good (used) scope of delivery: without supports and side guid ...

Key data: 1250 mm, 13 mm

1250 x 13mm Hydraulic shear

Intake pipe: 180 mm Voltage: 230 V, 50 Hz Filter area: 6.0 m² Flow rate: 1000 m³/h Total power requirement: 0.3 kw Machine weight approx.:78 kg Dimensions L-W-H: 400x600x700 mm Electrostatic separator: Filter chamber L: 360 x W: 510 x H: 500mm 3 trays with: - Pre-filter (knitted stainless steel) 500x370x20mm -Ionizer/Collector Cell 500x370x210mm -Post-filter (knitted stainless steel) 500x370x20mm

Key data: 11 , 1 , 250

Claw compressor Gardner Denver ( Elmo Rietschle ) C-DLR-250, UNUSED. Capacity 250 m3 / hour; 11 kW; EX motor; maximum pressure 1,8 bar; 2950 round per minute; Dimensions L 1450mm, H 1100mm, W 950mm Electric connection 400 V

x-travel: 400 - 800 mm y-travel: 200 - 400 mm z-travel: 200 - 400 mm total power requirement: 3 kW weight of the machine ca.: ? t dimensions of the machine ca.: ? m Short-term free from current operational resolution Untested, wear and tear due to age and use Price EXW / ex foundation Machine package 3 x Bridgeport 1 x Bridgeport design 1 x Kunzmann 2 x Fritz Werner 1 x DETOMBAY 2 x Reckermann The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lips LMP Extention Printcard 1185082-6111610321 WÄrtsila Art.No:E000004111

Compressor Becker T 4.25 DSK; 50/60 HZ; 1420/1700 umin.; 1.10/1.30 KW power; Air flow rate 25/30 m3/h; Pressure 600/600 mbar; new slats; installed in Foliant Taurus 530. Compressor Becker T 4.25 DSK; 50/60 HZ; 1420/1700 umin.; 1.10/1.30 KW power; air 25/30 m3/h; pressure 600/6000 mbar; with new blades; used for Foliant Taurus 530.

Wärtsila Lips Drunen LMP REV 1 LMP REV 1 23456789 4306590023 Wärtsila Art No.: W006927795

power capacity: kW volt: V ampere: A total power requirement: kW weight of the machine ca.: 84 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: IVM Model: DTPlus-600-2-XL (2 x Epson i3200 Print Heads) Year of Manufacture: 2023 Type of Machine : Digital Transfer Printing Line - Printing Speed: - 4-PASS: 12 m²/hour - 6-PASS: 8 m²/hour - 12-PASS: 4 m²/hour - Maximum Print Width: 600 mm - Maximum Print Resolution: 1800 dpi - Print Thickness: Adjustable from 1.5 mm to 6 mm Technology and Features: - Printhead Technology: Epson i3200 - Number of Printheads: 2 - Printhead Spacing: 10 mm - Ink Colors: CMYK + White - White Ink Circulation: Automatic - Color Management System: Standard - Ink Type: Water-soluble pigment ink - Ink Supply System: CISS (Continuous Ink Supply System) - Printing Costs: 1 L white ink = 40 m Drying and Software: - Drying Method: Air Drying System - RIP Software: MainTop Power and System Requirements: - Power Supply: 220 V - Power Consumption: 1200 W - System Requirements: Windows 7 or W ...

Manufacturer: DIMA Model: HS-100 This device is known for its high precision and versatility, thanks to its robust construction and motor-driven printing head, which moves on linear bearings. All printer settings can be precisely adjusted using an intuitive Windows-based interface, allowing for perfect configuration for every type of printed circuit board. The self-learning feature ensures quick and easy determination of the correct board position, simplifying operations and speeding up the production process Find more here - / Contact us at -

x-travel: 1016 mm y-travel: 610 mm z-travel: 760 mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Diosna Spiral Mixer Type: SP 120 D 2 analogue timers 2 speeds Spiral stainless steel Stainless Steel Boiler Flour dust cover for 75kg flour or 120kg dough on castors with brakes 380V 50Hz Overhauled and repainted Height: 125cm Width: 85cm Depth: 130cm

In-store baking oven WIesheu Type: Dibas Dibas 64 blue S 5 editions for 60×40 cm trays with proofer digital control Self-cleaning program Door with internal sliding mobile on castors Checked & cleaned, very good condition Specifications: Year of Make: 2016 400 V – 50 Hz Dimensions: Height: 207 cm Width: 95 cm Depth: 100 cm

Lips Drunen W006927795 Printed Circuit Board REV 1 23456789 Wärtsila Tuningcenter

used lifting tipper HK 600 (table / tabletop device), suitable for Diosna 160 and 200 kneading machines, height 140 cm

WIELOPILA WURSTER DIETZ FR10 WYSOKOSC CIECIA 160MM SZER 850MM SILNIK 90KW PODAJNIK ODBIORNIK ZE ZRZUTEM LASERY

besaummer automat Wurster Dietz fr97 komplete anlage built in 1997

length: 3000 mm width: 100 mm height: 260 mm The technical data is manufacturer or operator information and is therefore not binding for us. We reserve the right to sell the goods prior to sale, our terms and conditions of business and sale apply exclusively. About us more than 400 of our own machines in stock over 12,000 m² of storage space, crane capacity 70 t more than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. You can find further offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 500 mm, 1180 mm, 3500 1/min

Machine Details Stock-No. 1105-04053 Type of machine CNC Lathe Make DOOSAN DAEWOO Type PUMA GT 2600 L Year of manufacture 2021 Type of control CNC Storage location HAGUENAU Country of origin KORREA Delivery time immediately Freight basis ex site , loaded free Price Technical details turning diameter 780 mm turning length 1280 mm control FANUC i SERIES turning diameter over bed slide 630 mm centre height 350 mm spindle motor 26/22 kW spindle turning speed range 3500 rpm Chucking diameter 254 mm Feed - Longitudinal/Cross 24 mm/min rapid traverse: longitudinal and cross 36 mm/min max. workpiece weight between centres 1500 kg total power requirement 45 kW weight of the machine approx. 7.3 t dimensions of the machine approx. 7 X 2.5 m Additional information - CNC fanuc i series ONLY 2 AXIS MACHINE - Tailstock - automatic tool measuring device with swivel arm  ...

Stirring value as good as new (was not yet in use) Fabr. RVT; 2.2 KW n=1,420 1/min

Automatic feed via Diethei PD 100 control To the extension on the right Max. feed length: 2000 mm

Dematic roller curve right or left 90°-660-590 IR865 RA2322 Make: Dematic Running direction: 90° right running/ left running Roller width (RB): 590 mm conical, plastic coating Nominal/outer width (NB): 660 mm Inner radius (IR): 865 mm 3x 300-500V, 0,37kW Height frame: 132 Height including motor: 275 Gear motor: SEW Conveyor speed: between 0,142 and 1,42 m/s with Optionally available: frequency converter for freely adjustable conveyor speed Supports Side guides one and both sides All prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Drive type: Round belt Construction year: 2005 condition: good (used) Nominal / inner radius in mm: 865 Nominal / outside width in mm: 660 Roll width in mm: 590 angle: 90° Driven: YES scope of delivery: without supports and side guides For individual, expert advice, simply get in touch with us. Simply ...

Dematic roller curve right 90°-500-440 IR795 RA1680 Make: Dematic Running direction: 90° right running Roller width (RB): 540 mm conical, plastic coating Nominal/outer width (NB): 600 mm Inner radius (IR): 795 mm length: 1790mm 3x 300-500V Height frame: 132 Height including motor: 275 Gear motor: SEW WF20 DT71D4/Z/MM03/BW1 Conveyor speed: freely adjustable between 0,142 and 1,42 m/s with frequency converter Scope of delivery: without supports (please enquire if required) Features: Drive type: Round belt Construction year: 2005 condition: good (used) Nominal / inner radius in mm: 795 Nominal / outside width in mm: 600 Roll width in mm: 540 angle: 90° Driven: YES scope of delivery: without supports and side guides For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look for ...

Dematic roller curve right 90°-600-540 IR795 RA1653 Make: Dematic Running direction: 90° right running Roller width (RB): 540 mm conical, plastic coating Nominal/outer width (NB): 600 mm Inner radius (IR): 797 mm length: 1790mm Overall height frame: 132 mm Height including motor: 275 mm Motor MOVI-Mot 3x300-500V 0,37kW 1400 u/min max Brake 220-240V Gear motor: SEW WF20 DT71D4/BMG/Z/MM03 Conveyor speed: freely adjustable between 0,142 and 1,42 m/s with frequency converter Scope of delivery: without supports (please enquire if required) Features: Drive type: Round belt Construction year: 2001 condition: good (used) Nominal / inner radius in mm: 795 Nominal / outside width in mm: 600 Roll width in mm: 540 angle: 90° Driven: YES scope of delivery: without supports and side guides For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will  ...

AVK generator , alternator 2840 kva 400volt year 2008

2x Diosna SP 200 AD - mit 5 kessel - mit hebekipper Alle Maschine nach gülüngel überholung. Moglich verkauf separate maschinen. Moglich austauch mit andere alte maschine in abrechnung. Meh info auf frage mail oder WhatsApp

Clamping force: 60 t Screw diameter: 30 mm Shot weight: 96 g Distance between tie bars V: 520 mm Distance between tie bars H: 520 mm Shot volume: 106 cm3 1 x core puller Type: Horizontal Drive: Hydraulic

Engine Brand: DETROIT DIESEL, Conditie: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Green , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: No Starter Present , Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/detroit-diesel-12v92ta-812 3-7400-used/830, , = More information =, , Type: Engine, Empty weight: 2.350 kg, Type number: 12V92TA 8123-7400

Key data: 835 mm, 510 mm, 510 mm

Fully Functional CNC Milling Machine Machining Center Vertical DMG DMC 835 V Year of construction 2006 Control: SINUMERIK 840 D Powerline Spindle speed: 12,000 rpm Spindle motor: 14 kW X - Travel: 835 mm Y - Travel: 510 mm Z - Travel: 510 mm A-axis: available Rapid traverse: 30 m/min Tool holder: SK 40 Tool changing device: 30 Table load: 800 kg Clamping area: 1,000 x 560 mm Operating hours: 49,660 | 12,902 h (30.01.2025) Footprint of the machine: 2,100 x 2,700 mm Machine weight: approx. 4,200 kg Equipment SIEMENS 840D ShopMill Linear scales Electronic handwheel IKM – 25 bar / 30 l/min Conveyor Canopy Location of the machine: 76661 Philippsburg The machine can be viewed on site at any time. This is always desired. We would love to hear from you.

One color offset ADAST Dominant 516, in beautiful condition, extreemly well kept and maintained. VARN COMPAK III dampening system. All serial equipment and blower.

Schneider stream delivery tables. standard and extended. Both in production ready condition, for envelope delivery, etc.

Key data: 40 mm, 900 mm

40 DONAU fully functional, Condition : well used

Key data: 730 , 730 , 850

CNC controller: FS-31IA (MSX-701 III) Axes X-axis travel mm: 730 Y-axis travel mm: 730 Z-axis travel mm: 850 Rapid traverse m/min: 50 Distance spindle nose - table surface mm: 100 – 830 Acceleration in the axes m/s2: 9.8 (X), 10.8 (Y), 6.9 (Z) Worktable Number of pallets: 2 Table dimensions mm: 500X500 Maximum workpiece size (D x H) mm: 800 X 1000 Max. workpiece weight kg: 500 APC time s: 7 División estandar Grados: 0.001º Maximum workpiece rotation diameter mm.: 800 Spindle Spindle speed rpm: 14.000 Spindle drive power kW: 22/18.5 Tool holder: HSK A63 Bearing Inner Diameter mm.: 40 Spindle torque Nm: 220 Tool system Tool magazine slots: 120 With free neighboring places mm: 140 With occupied neighboring places mm: 70 Max. Tool Length mm: 500 Max tool weight kg: 12 Tool-to-tool time s: 0,9 Chip-to-chip time s: 3,3 Tool Shanks : BT-40 NUMBER OF TOOL OFFSE ...

Diesel Power Generators Engine: MAN Type: D2858 MT Power: 240 kVA Year: 1975 Hours: 36 General overhaul in October 2023 by a specialist company In operation as an emergency power generator until November 2024, now dismantled and stored. Generator: A.v. Kaick DIKB 55/225-4 Voltage: 400/231 V, 50 Hz Speed: 1500 1/min Subject to prior sale - errors possible! Internal reference number: E-1004-93

Inv. Num. : 8185 Type: FP 3 NC Producer: Deckel Generated: Parameters: Work table length: 700 mm Work table width: 460 mm Maximum vertical spindle speed: 4000 1/min X-axis travel: 400 mm Y-axis travel: 400 mm Travel Z axis: 340 mm Machine height: 1800 mm Machine length: 2000 mm Machine width: 1400 mm Machine weight: 1900 kg

Manufacturer: Steinert Type of Machine: Wet Drum Magnetic Separator Year of Manufacture: 2015 Model: WDS 92 92 [without CE package] Find more here - / Contact us at -

Key data: 400 mm, 40 mm

- incl. key Specifications - Table diameter: 400 mm - Table height: 40 mm - Rotation range: 360° - Pan/tilt range: 0 - 90 ° - Max. load capacity (horizontal table): approx. 200 kg - Max. load capacity (table vertical): approx. 100 kg - Dimensions mounting plates horizontal/vertical: 375 x 500 / 375 x 255 mm - Dimensions rotary table WxHxD (table horizontal): approx. 570 x 280 x 500 mm - Net weight: approx. 200 kg

Specifications Maximum pressure: 100 tons Year of Make: 1995 Pressing force: 82 tons/m² Number of ties: 5 in vertical Channel cross-section: 1100 x 1100 mm Dimensions of the tailgate: 2050 x 1100 mm Power connection: 400 V/ 2 x 55 kW Weight: approx. 36 tons Bale tying: automatic Press capacity under operating conditions: max 1170 m³ / hour Press capacity at idle: max 720 m³ / hour Theoretical throughput: to density 30kg/m³) 22 tons/hour Theoretical throughput: to density 50kg/m³) 28 tons/hour Theoretical throughput: to density 100kg/m³) 42 tons/hour Open hopper allows filling with the conveyor belt Pre-pressing flap Automatic regulation of the channel Automatic binding with wire Choice of the length of the finished bale thanks to the bale counter Compact hydraulic power unit with low noise emissions Press plate stably guided on large rollers ...

Packer, Fabr. Joha, type: Diamant 2, 2-head, for 0.33 lt bottle and 0.5 lt bottle in box of 20, year 1995

Many elements of the engines are susceptible to being reconditioned when they begin to deteriorate. RS MOTOR has the capacity to recondition these elements and also a very large stock of them, this allows us to proceed with the repair at any stoppage at the plant, avoi-ding stops and high investments. The use of reconditioned elements can also be consideted in maintenance steps of some relevance. Some of the refurbished items that are normallu in sotcks are: CYLINDER HEADS COMPLETE ENGINES BLOCKS INTERCOOLER ACTUATORS PUMPS ...

DEUTZ-MWM TCG 2032 CYLINDER HEAD DEUTZ-MWM TCG 632 CYLINDER HEAD

turning diameter: 250 mm turning length: 510 mm control: Fanuc I Series total power requirement: 12 kW weight of the machine ca.: 4 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 32 mm spindle turning speed range: 8000 U/min spindle passage: mm turning length: 320 mm Control: Fanuc 0i-TC total power requirement: kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: 2,63 x 1,3 x 1,8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Two-side evaporator GEA KUBA Type: DRS 44637 Cooling capacity: 60.7 kW at DT7, 58 kW at DT8 Fin spinning: 7 mm Fans: 4 x 630 mm Dimensions: 4500 x 1550 x 700 mm Block made of stainless steel Refrigerant: NH3 Volume: 72 L Weight: 650 kg Quantity in stock: 3 Reference number: CH 535 Condition: Used Price on request. We have many others machines for meat industry and cooling - handtmann, seydelmann, viessmann, bitzer, copeland, . Check our offers.

liter capacity: 63 l tank: 250 l Pressure power: 1,5 (max. 2,5) bar total power requirement: - kW weight of the machine ca.: 100 kg dimensions of the machine ca.: 1,40,61 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 80 kVA, 350 mm, 600 kp

Rated power at 50%ED: 80kVA Short-circuit current: 45.4kA Electrode force: 100-600daN / single stroke Projection: 350mm --- Welding control: MPS 100mono (8 times, 1 program) --- Incl. additional options: - Pre-mounted electrode holder -Foot switch - Adjustment device - Electronic flow monitor - Main switch + transformer tap changer 4-way --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock

Key data: 140 mm, 280 mm

Zimas D290V - Lathe Special price € 2,800 instead of € 3,490 excl. VAT - 2-axis position indicator - Stepless speed adjustment with digital display - Plan feed - Camlock mount C4 - Upper slide can be rotated 360° - Tailstock adjustment +/- 5 mm for taper turning Accessories - Undermount with 1x door & 3x drawer - Three-jaw chuck 160 mm with interchangeable jaws - Fixed bezel - Centering tip - Operating tools Specifications Range: - Circumferential Ø over bed: 290 mm - Circulating Ø over cross slide: 180 mm - Turning length between tips: 700 mm - Bed width: 182 mm Headstock: - Spindle bore: 38 mm - Spindle nose: MK5 - Speed levels: infinitely variable - Speed range: 80 - 2000 rpm Feed: - Metric threads: 0.2 - 3.5 mm / 18 steps - Inch thread: 8 - 56 dpi / 21 levels - Longitudinal feed: 0.085 - 0.832 mm - Transverse feed: 0.01 - 0.10 mm Sleds a ...