double cross cut used for sale

Working hours machine: 23304 h Working hours laser on: 22804 h Working hours beam on: 10185 h Laser power: 4400 Watt Working range laser: 3000 x 1500 mm Max. steel: 25 mm Max. stainless steel: 20 mm Max. aluminium: 12 mm Length: 12800 mm Width: 6300 mm Height: 2400 mm Machine weight: 15000 kg Electrical connected load: 51 kVA

Messer MultiTherm 4000Year of manuf. : 2020 ____________Description:Technical specificationsWorking surface:2000 mm x 15000 mmTotal width:5070 mmHeight:1980 mmequipment:-Global Control S with 15 colour touchscreen:-Joystick and handwheel for Global Control S panel:-Cooling for the control cabinet:-Laser diode:-Drives up to a maximum of 35 m/min. AC:-Heat shield without air cooling:-Runway for double-sided longitudinal drive HEB:-OmniFlow oxyfuel supply up to 70 m/h (gas flow control):-ALFA machine cutting torch (internal ignition):-Smartlifter 300:-SensoMat ARKI:-Full addressing of gases:-Light barriers:-Safety device for wheel housing (foot switch)

A CNC water cutting system Knuth is available. Cutting dimensions X/Y: 6000mm/2000mm, travel path Z: 250mm, max table load: 600kg/m², max feed rate: 16m/min, positioning accuracy at 500mm: +/-0.05mm, repeatability at 500mm: +/-0.05mm, max operating pressure: 4000bar, total power requirement: 40kW. Machine dimensions X/Y/Z: approx. 6350mm/3250mm/4000mm, weight: approx. 4000kg. Documentation available. An on site inspection is possible.

Air table, air conveyor table right 75x50 cm, side table left 75 x 50 cm

Reference Num.: 4433 Brand: Polar Type: 78 ES Construction year: 1999 Available: 10.06.2026 Status: Not in production Location: Deutschland Cutting Size: 780 mm Electrical Power Input: 2 KW Feeding depth: 780 mm Feeding height max.: 120 mm Machine size: Length: 1,915 mm, Width: 1,550 mm, Height: 1,450 mm Total weight: kg 1,300 / lbs 2,866 Table height: 900 mm Equipment: - Lichtschranke - Programm - Lufttisch

PAPER CUTTER POLAR 137 E -Year 1998, Only one owner -Cutting width max. 1370 mm -Feed depth max. 1370 mm -Clamp opening max. 165 mm -Front table length 730 mm -Complete programmation - Display -Photocells -Air chromed bed – oversize lateral air tables -Power supply 3 phase, 380V – 11 Amp -Two spare knives, knife change tools, manuals and all accessories -In very good conditions, totally checked and cleaned -Any test is possible, available immediately in our warehouse

Condition: unchecked Item is sold as is Weight may be ggbfs. Deviate. Auction-ID: A1-46354-24

Condition: unchecked Item is sold as is Weight may be ggbfs. Deviate. Machine must be dismantled by the buyer and transported out of the hall area. It cannot be guaranteed that a forklift is on site. Auction-ID: A1-46354-41

sanding machine designed for smoothing and refining cutting boards used in the cutting process. Auction-ID: A7-46462-23

A paper core cutting machine Sternberg & Phillips with parallel winding capability is available. Winding units: 1, max. core width: 1750mm. An on-site inspection is possible.

Attec Food Technology fully automatic pig cutting line consisting of: steel hanging line, dimensions: 6500 mm x 400 mm x 1700, Attec automatic primal cutting line, type: AGOL-850, order number: ON17163, year of construction: 2015, 400 V, 3 Ph, 50 Hz, 45 kW, capacity: 800 pigs/hr, product: pork carcasses, left & right, s/s outfeed belt for waste pork legs, belt width: 290 mm, automatic measuring system for precise and individual cuts of individual pork carcass, plastic belt, belt width: 800 mm, 1300 mm, 500 mm, 300 mm, 100 mm and s/s protection fence, total dimensions: 9800 mm x 4200 mm x 2200 mm. Line is never used.

Rondo cutting table, model: ZGM635.A, machine number: D66011989, year of construction: 2016, working width: 640 mm, total dimensions: 3700 mm x 1000 mm x 1900 mm.

Bysprint Fiber 4020 4 KW - Hours: 72,000 - Cutting hours: 20,000 - Last maintenance: 12/19/2025 - All modules in order - Cutting head in order, General overhaul 2024 - Annual scheduled maintenance always carried out by Bystronic

Working width: 1100 mm Number of discs: 2 Auction-ID: A3-43524-1366

Semi-automatic long-cut cold circular saw: - With mitre adjustment left 50°, right 60° - Digital cutting angle display - Feed speed hydraulically adjustable - Hydraulic workpiece clamping - 4 spare saw blades Saw blade diameter 510 mm Cutting diameter 150 mm Cutting area at 90 degrees: flat 450 x 150 mm Cutting range at 90 degrees: square 150 mm Speed 29 / 58 m/min. Total power requirement 4.2 kW Weight 1.55 t Dimensions L-W-H 1.8 x 1.7 x 1.7 mm Auction-ID: A7-46460-460

Type: Circular saw for metal profiles Electrical supply: 380V 50 Hz Motor power: 2.2 †4 kW Auction-ID: A7-46477-15

The V-LOAD Cutter Megastar convinces due to its extremely robust and reliable construction. The back-cross cutting edge consists of through-hardened special steel and is equipped with two blades that move in the opposite direction. The cutting movement is therefore extremely calm and powerful. The cutting bracket is almost entirely maintenance-free and particularly suitable for professional, demanding use. Auction-ID: A3-43524-17396

Type: Stone cutting machine Blade: Diamond disc Cooling: Water cooling Electrical supply: 380V 3F 50 Hz Current: 20 A Auction-ID: A7-46477-11

A total of seven identical Tria S.p.A. plastic granulators are available. Rotor knives: 3, stator knives: 2, rotor diameter: 260mm, motor power: 7.5kW, throughput: 150kg-220kg/h, hopper opening: 350mm/300mm, hopper capacity: 30l, discharge hopper capacity: 15l. Machine dimensions X/Y/Z: approx. 1200mm/800mm/1750mm, weight: approx. 650kg. Documentation available. On-site inspection is possible.

Frame for transporting panel blanks in the CNC production area, loaded on the left and right on a Euro pallet Auction-ID: A1-46501-263

CNC Portal Plasma Cutting Machine Manufacturer: Eckert Type: Jantar 2 Year of Make: 2011 CNC control Working area: 2x4 m 1 plasma torch with power source Kjellberg HiFocus 161i Automatic gas console Extraction table

Bosch professional (blue) in L-Box GKF 12V–8 With battery and charger as well as spare milling cutters Technical highlights of the GKF 12V-8 Ergonomics: World's first professional cordless edger in the 12V segment with a unique shape for perfect control. Depth adjustment: Macro quick adjustment and fine micro adjustment (0.1 mm steps) with locking. Safety: Sensor-controlled drop control that immediately switches off the device in the event of a fall. Auction-ID: A1-46501-1645

Plasma cutting machine Microstep SPL-P 3001.15, built in 2011 Working area 1500x3000 mm, cuts steel, stainless steel and aluminum, incl. software, incl. plasma source Kjellberg HiFocus 161i with automatic gas console, pressure reducer and Extraction Donaldson Torit DCE for outdoor installation. Last major maintenance at the end of 2024 The plant has already been dismantled , loading is possible.

trench cutter with double throwing wheel, unused Auction-ID: A1-40418-34

Spit F 40 slot milling machine including accessories and 3 milling machines, wall groove cutter Auction-ID: A7-46327-54

Works flawlessly With large and small machine vise with threading devices With foot pedal With lighting With attacks Loading 100 EUR Auction-ID: A1-46501-2042

Auction-ID: A1-46501-2063

Frame for transporting panel blanks in the CNC production area, loaded on the left and right on a Euro pallet Auction-ID: A1-46501-117

Kibani Battery Brush Cutter - Incl. 20V Battery and Charger - Electric Brush Cutter - with 15CM Weed Brush - Grass Trimmer - Edge Mower Auction-ID: A1-40418-256

AGP New old diamond drilling machine with water cooling, guide M14 and 1/2\" intake. This set includes water barrel, PRCD, guide. New old Baier BDN 1700 watt professional slot saw Auction-ID: A1-40418-201

Kibani Battery Brush Cutter - Incl. 20V Battery and Charger - Electric Brush Cutter - with 15CM Weed Brush - Grass Trimmer - Edge Mower Auction-ID: A1-40418-137

Type: Petrol Cut-Off Saws / Disc Cutters Brand: Makita Quantity: 2 units Execution: - Handheld petrol-driven cut-off saws - Suitable for cutting metal, concrete, and stone - Integrated blade guard - Manual recoil start - Front and rear handles Equipment: - 2x cut-off saws - Mounted cutting discs (condition unknown) Condition: Used Auction-ID: A7-45993-98

Kibani Battery Brush Cutter - Incl. 20V Battery and Charger - Electric Brush Cutter - with 15CM Weed Brush - Grass Trimmer - Edge Mower Auction-ID: A1-40418-262

Equipped with 4-cyl. \"John Deere\" diesel engine; 27.6 hp; lifting device; 1 ew hydraulic valve (connected to cutter bar); PTO shaft with 540/1000 rpm; 150 cm cutter bar; (PLEASE NOTE! this vehicle has a license plate registration, when you pick it up you must register it on the spot with a third party or export it, there are extra costs involved) Auction-ID: A1-40137-254

Good condition Auction-ID: A7-46327-59

Concerns 3 brush cutters/edge mowers; 1 x Chainsaw; all need maintenance! Auction-ID: A1-40137-351

Bosch (green) in L-Box PWS 720 Flex 220V Power Cutter incl. Discs incl. selection of abrasives Auction-ID: A1-46501-1517

LAMELLO ZETA P2 CORDLESS GROOVE MILLING MACHINE, DIA The battery-powered P-System groove milling machine, with which all connecting fittings of the Lamello P-System can be milled quickly and precisely. After changing the milling cutter, classic flat dowels can also be milled in. TECHNICAL DATA Voltage: 18 V Speed: 9,000 rpm Cutting Material: DIA Number of cutting edges: Z3 Max. milling depth: 20 mm Weight: 3.7/4.1 kg with battery 4.0Ah/5.5Ah FEATURES AND BENEFITS Fast, form-fitting anchoring of all P-System fittings. After changing the milling cutter, classic flat dowels made of wood can be milled in. Member of the \"Cordless Alliance System\" CAS → batteries from external companies of the CAS compatible. Time saved, as fittings are simply inserted by hand - no additional fastening material required. A wide variety of mounting brackets can be realized by swivel stop. Cabinet connec ...

PTO driven, three-point device, auger Ø380mm, Complete with potato/beet cutting knife. Auction-ID: A1-40137-93

Auction-ID: A1-46501-2133

Stehle Profile Cutter Head 134x80x30mm Auction-ID: A1-46501-2040

AGP New old diamond drilling machine with water cooling, guide M14 and 1/2\" intake. This set includes water barrel, PRCD, guide. New old Baier BDN 1700 watt professional slot saw Auction-ID: A1-40418-167

Oertli high-performance folding cutter with indexable inserts Z3 Auction-ID: A1-46501-2146

REMS Bracket No.22 R 1/4\" - 1\" Thread Cutter Thread Cutting Head Auction-ID: A7-46327-227

Bosch professional (blue) L-Box GKF 600 Professional 220 Incl. various milling cutters in a set incl. various accessories see pictures Auction-ID: A1-46501-808

Profile milling system for tongue and groove connections e.g. parquet, wall cladding,... Auction-ID: A1-46501-2064

BYSTRONIC BySpeed 3015 laser cutting machine was built in 2005 in Switzerland by Bystronic Laser AG. The machine on offer has been regularly maintained throughout its service life and is in very good technical condition. BYSTRONIC BySpeed 3015 is an excellent solution for precise cutting of a wide range of materials, i.e. stainless steel or aluminum. Thanks to the use of a number of well-proven solutions, the machine is perfect for both unit and series production. Workpieces with a maximum length of 3000 mm and a width of 1500 mm are machined by a high-quality laser beam with a power of 4.4 kW. The beam is generated by a reliable source with the highest energy efficiency. The cutting head with a powerful drive, in turn, provides very dynamic operation and a feed rate of up to 169 m/min. All this is complemented by a robust design that maintains the highest stability during even the mo ...

Equipment: Cutting unit with reel Knife bar (cutting system) Feed auger Side dividers left/right Hydraulic reel adjustment Transport trolley (1-axle) Trailing drawbar Holder for combine harvester Technology: Working width estimated approx. 6.0 – 7.5 m Uniform crop flow via feed auger Classic grain header system Mechanical/hydraulically operated Used Auction-ID: A7-46606-1031

Technical details Type: Abrasive cutting and grinding discs (mixed lot) Configuration: Assorted discs stored in cabinet (boxed and loose) Disc types: - Cutting discs (thin) - Grinding discs (thicker) Sizes: - Ø 230 mm (majority) - Some Ø 180 mm Specifications (examples): - 230 × 6.0 × 22.23 mm (grinding) - 230 × 4.0 × 22.2 mm (cutting) Brands: Rhodius, Lukas (Primeflex), Bosch Professional, Carborundum Electrite Material compatibility: Steel and stainless steel Quantity: Approx. 120–200 discs (boxed and loose) Packaging: Partial boxes and loose stacks Application: Cutting, grinding, and finishing operations using angle grinders Condition: Mixed (new old stock and used/open units) Dimensions and weight (approx.) Length: 600 mm Width: 500 mm Height: 1800 mm Weight: 120 kg Auction-ID: A7-46498-224

Technical details Manufacturer: REMS (Germany) Type: Manual pipe thread cutting die stock Operation: Ratchet type Thread size: R 1 1/4\" (approx. 1¼ inch) Thread standard: Likely BSPT (R thread) Marking: REMS / No. 43 Application: External threading of pipes Use case: Plumbing, industrial pipework, workshop maintenance Equipment - Ratchet lever - Die head / die stock - Thread size marking R 1 1/4\" Auction-ID: A7-46498-98