double cross cut used for sale

General Description Automatic tool and cutter grinding machine manufactured by KOEBAU . Designed for precision sharpening and regrinding of milling cutters, drills, reamers and other cutting tools in production and toolroom environments. Technical Details Manufacturer: KOEBAU Machine type: Automatic tool and cutter grinding machine Automatic feed system Hydraulic components Mechanical workholding fixture Multiple guarded grinding stations Coolant and lubrication system Condition Used industrial condition. The machine appears complete with automatic feed system, hydraulic components, workholding fixture, guarded grinding stations and coolant/lubrication system. Operational status, spindle condition and grinding accuracy have not been tested. Auction-ID: A7-50745-26

Makita LW1400 Abrasive Cut-Off Saw Portable stationary abrasive cut-off saw for cutting metal profiles, tubes and bars. Manufacturer: Makita Model: LW1400 Year: 2016 Power: 2,200 W Cutting wheel diameter: 355 mm Electrical supply: 220–230 V, 10 A, 50–60 Hz No-load speed: 3,800 rpm Certification: CE marked Application: Cutting metal profiles, tubes and bars Condition: Used Approximate dimensions: 530 × 295 × 640 mm Approximate weight: 17 kg All descriptions are indicative only. Auction-ID: A1-50546-85

Technical details Manufacturer: Wickman Bennett Type: Universal tool and cutter grinder Configuration: - Universal swivelling grinding head - Universal indexing workhead - Precision grinding spindle - Secondary grinding spindle attachment - Reciprocating worktable - Adjustable indexing head - Precision handwheels - Wheel guard - Coolant system with integrated tank and pump - Electrical control panel - Machine work lamp Application: - Tool and cutter sharpening - Milling cutter grinding - Drill sharpening - Reamer grinding - Gear cutter grinding - Form tool grinding - Precision toolroom operations Construction: - Heavy-duty cast-iron machine frame - Manual universal grinding machine Dimensions: - Length: Approx. 1800 mm - Width: Approx. 1700 mm - Height: Approx. 1900 mm Weight: Approx. 2200 kg Condition: Used Observed condition: - Machine appears substant ...

control: FAGOR 8055 TC workpiece weight: 10.000 kg handwheel: inkl. Chip coveyor: inkl. centre height: 500 mm greates pass round over bed: 1300 mm Swing diameter face slide: 1000 mm centre distance: 5000 mm travel of cross-slide: 680 mm rapid traverse x + z axis: 8 m/min bed width: 900 mm spindle nose: DIN 55026-11 number of spindle speeds: 0-800 U/min/rpm spindle bore: 104 mm spindle diameter in front bearing: 180 mm turning speed range:: Anzahl 4 main drive: 37 kW Torque: 10.000 Nm : Sauter 300 x 300 diameter of quill: 180 mm quill stroke: 300 mm Height: BIS ZUR FLACHFÜHRUNG 805 mm total power requirement: 45 kW weight of the machine ca.: 8,5 t dimensions of the machine ca.: m Equipment -4-jaw faceplate (independent jaws) Ø 800 mm -3-jaw faceplate (independent jaws) Ø 400 mm -Steady rest (4-point support) Ø 750 mm -Chuck guard -Full rear enclosure The data for this ad was ...

Offer 26219 Technical data: - Saw blade dimensions 3375 x 27 x 1.1 mm - Cutting speed infinitely adjustable 18 - 100 m/min - Hydr. Cutting pressure regulation - Hydr.- Lifting + lowering of the saw frame - Machine table left + right swivel for mitre cuts - Cutting area - at 90° around 255 mm - Square 240 mm - flat 300 x 180 mm - at 45° around 210 mm - flat 200 x 160 mm - at 60° left about 135 mm - Max. opening width of the vice 310 mm - Drive 400 V / 2.2 kW - Space requirement approx. W 2000 x H 1500 x D 2100 mm - Weight approx. 990 kg with - Feed roller conveyor 5000 mm - Discharge roller conveyor with dimension stop 5000 mm

Voltage: 220 V, Rated power: 2.000 W, No-load speed: 1.500 rpm, Rectangular section cutting capacity at 0º: 158 x 80 mm, Square section cutting capacity at 0º: 100 x 100 mm, L-section cutting capacity at 0º: 110 x 110 mm, Rectangular section cutting capacity at 45º mitre: 85 x 85 mm, Square section cutting capacity at 45º mitre: 85 x 85 mm, L-section cutting capacity at 45º mitre: 85 x 85 mm. 2023 Auction-ID: A1-50595-10

Power supply: 380V, 3 ph, 50-60 Hz, Spindle speed: 2810 RPM, Total power: 1,8 kW, Air pressure: 6-8 bar, Air consumption: 41 lt/min, Min. processable profile length: 100 mm, Saw blade outer diameter: Ø400 mm, Maximum saw blade height: 140 mm, Saw blade bore diameter: Ø32, Saw blade thickness: 4,2 mm, Number of teeth: 120, Conveyor: Length: 500 + 300 cm / Width: 35 cm. Year 2012 Auction-ID: A1-50595-26

Power supply: 220 VAC, 1 ph, 50-60 Hz, Spindle speed: 2860 RPM, Motor power: 1,5 kW, Air pressure: 6-8 bar, Air consumption: 10 lt/min, Saw blade outer diameter: Ø400 mm, Saw blade bore diameter: Ø32 mm, Saw blade thickness: 4 mm, Number of teeth: 120, Min. processable profile length: 350 mm, Conveyor: Length: 3000+3000 mm / Width: 200 mm / Adjustable height / Both sides. Auction-ID: A1-50595-13

Power supply: 380V / 3 ph / 50-60 Hz, Rotation speed: 2810 rpm, Total power: 2,2kW, Air pressure: 6-8 bar, Air consumption: 45 lt/min, Min. processable profile length: 450 mm, Saw blade outer diameter: Ø600 mm, Maximum saw blade height: 215 mm, Saw blade bore diameter: Ø32, Saw blade thickness: 4,2 mm, Number of teeth: 120, Conveyor: Length: 300 cm / Width: 30 cm / Adjustable height / Both sides. Auction-ID: A1-50595-2

Power supply: 380V, 3 ph, 50-60 Hz Spindle speed: 2810 RPM Total power: 1,5 kW Air pressure: 6-8 bar Air consumption: 41 lt/min Min. processable profile length: 100 mm Saw blade outer diameter: Ø350 mm Maximum saw blade height: 100 mm Saw blade bore diameter: Ø32 Saw blade thickness: 3,8 mm Number of teeth: 120 Conveyor: Length: 4000 mm / Width: 350 mm / Both sides. Auction-ID: A1-50595-42

This 3-axis AMADA FOL 3015 NT was manufactured in 2006. It features an impressive X-axis travel of 3420 mm, Y-axis travel of 1550 mm, and Z-axis travel of 200 mm. The machine is equipped with a powerful 4500 W laser source and includes a side pallet loading system, FANUC AF4500E CNC control, and an industrial extraction system. If you are looking to get high-quality laser cutting capabilities, consider the AMADA FOL 3015 NT machine we have for sale. Contact us for further details.

turning length: 1000 mm turning diameter over bed: 430 mm turning diameter over slide rest: 235 mm spindle turning speed range: 11.2 - 2.000 U/min spindle bore: 56.0 mm morse taper: 4 MK quill stroke: 135 mm bed width: 333 mm spindle taper: DIN 55022 Gr. 6 total power requirement: 7.75 kW weight of the machine ca.: 1950 kg From a maintenance workshop Good condition () Features: - Heavy-duty, robust conventional lead/feed screw machine - 3-jaw chuck, Ø 250 mm, including replacement jaws - RSF Elektronik digital display Type Z735 - MULTIFIX tool holder, with 5 inserts - FINN SAFETY foldable chuck guard Type SPS 400 - Sliding tailstock Includes RÖHM rotating center point - Freely adjustable machine lamp - 1x chuck key - Chip guard - Sliding bed stop - Coolant system with drip pan The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1000 mm, 1 mm

used CoilTec cross-shear, with hold-down and unwinder, mobile, with connection pockets to the Modular workbench, spout height 965 mm Note: Sheet metal infeed only possible from the left! Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is being carried out Working width: 1000 mm Sheet thickness max. steel: 1.00 mm Weight: 120 kg Colour: anthracite grey/orange Dimensions::1320 x 1500 mm Coil weight: 250 kg

max. turning length: approx. 800 mm, centre height: approx. 150 mm, hollow spindle diameter: approx. 50 mm, with 3-axis digital display, Fabr. ELESTA, type: VISULESTAIIE, with multifix steel holder, magnetic chuck, coolant device, splash guard and machine light as well as various machine accessories

Key data: 250 mm, 2240 U/min

max. turning length: 1000 mm, center height: 250 mm, hollow spindle diameter: 60 mm, max. speed: 2240 rpm, with 3-jaw chuck, Fabr. SCHUNK, type: ROTA-S-PLUS, diameter: 250 mm, with machine light, steady rest and Multifix steel holder

Cuts fillets into portions by weight, The Marel IPM3 X300 is a portion cutter for fish, chicken and meat fillets. Each piece is scanned on the belt, and the machine works out where to cut to get portions of a fixed weight or length. You get more out of every fillet with less trim left over., The machine was built in 2005 and has a perforated belt 280 mm wide. Settings are made on the control panel with a colour screen., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/marel-ipm3-x300-portion-cutter/, Type: Portion cutter (fixed weight or fixed length), Products: Fish, chicken and meat fillets, Belt: Perforated, 280 mm wide, Scanner: Cameras with laser line, Controls: Control panel with colour screen, Electrical: 3 x 380–480 V, Construction: Stainless steel

Used Urschel cutting machine, built entirely in stainless steel, This Urschel cutting machine stands on castors and is built in stainless steel. Product travels from the hopper into the cutting section; whatever has been cut leaves the machine on the other side through the discharge chute. Drive is by electric motor and belts, and the controls sit in their own box on the machine., The type plate is missing, so the year of manufacture and the exact type are not known. Testing with your own product can be arranged., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/urschel-cutting-machine/, Type: Cutting machine, Infeed: Hopper, Drive: Electric motor with belt drive, Controls: Own control box on the machine, Construction: Stainless steel, on castors

Mobile oxy-fuel welding and cutting machine with two gas cylinders, pressure reducers, hose package and case with various torches and accessories. Auction-ID: A7-50868-110

Date of Manufacture: 08-2021 Serial No.: M150140000 Dimensions: 856 x 648 x 551 mm (34 x 25.5 x 22 inches) Empty Weight: 50 kg (110 lbs) Loaded Water Mass: 180 kg (400 lbs) Maximum Flow Rate: 1.9 L/min (0.5 gal/min) at 27.5 MPa (4,000 psi) Maximum Pressure: 27.5 MPa (4,000 psi) Maximum Water Temperature: 54 °C Maximum inlet pressure: 0.86 MPa (125 psi) Main unit: 100-240 VAC, 50/60 Hz, 2.0 A, 100 W, IP 32 Total power (unit + pump): 1.8 kW at 110 V / 2.3 kW at 220 V Auction-ID: A1-50714-4206

CONTROLS   PLC SIEMENS SIMATIC MULTI PANEL FEEDSTOCK TUBE   external diameter min.: 8 mm   external diameter max.: 90 mm Round tube min. 8 mm            max. 90 mm Square tube min. 8x8 mm             max. 80x80 mm Rectangular tube min. 15x10 mm                  max. 60x85 mm

Working parameters: Manual industrial machine for sharpening and grinding cutting tool profiles. Equipment included: vertical grinding wheel with protective housing, adjustable tool holder, work table, manual movement and adjustment via handwheels, coolant/cooling device and metal protective screen. Notes: Robust construction on metal frame. Auction-ID: A1-50714-4312

Offered for sale is a programmable guillotine cutter with electronic control system. Technical specifications: Cutting length of the original material: 75-1000mm, cutting width of the original material: 180-1000mm, processable paper grammage: 40-173g/m², minimum sheet length: 40mm, minimum sheet width: 40mm, maximum stack height: 80mm. Control system: SEYPA-TV with electronic control panel and program selection buttons. Equipped with large work table, side tables, material stop, foot control and rear material support area. Inspection possible by arrangement.

Eurocutter TM 28 TKT - three knife trimmer year 2009 max. size uncut 440 x 310 mm max. size cut 420 x 300 mm min. cut size 80 x 80 mm max. stack height 100 mm Min. Stack Height 5 mm max. 28 cycles/min. compressed air 12 l/min. set of knives compressed air 12 l/min automatic format setting Weight 2,850 kg good condition in production

- Consisting of approximately: - 10 x complete sets with HSK F63 tool holder, collet and cutter. - 6 x complete sets with ISO 30 tool holder, collet and cutter. - 3 x HSK F63 strain clamping tool holder. - 10 x cylindrical handle cutting tools. - 12 x tapered handle cutting tools. - 10 x tweezers of various sizes. - Blades. - Operating conditions of these items: unchecked. - This item is delivered loaded by truck. The costs of disassembly and loading are those specified as additional costs. Auction-ID: A7-50834-27

- Consisting of approximately: - 18 x complete sets with ISO 30 tool holder, collet and cutting tool. - 2 x ISO 30 tool holder with collet. - 8 x tweezers. - 14 x cutting tools. - Operating conditions of this item: unchecked. - This item is delivered loaded by truck. The costs of disassembly and loading are those specified as additional costs. Auction-ID: A7-50834-13

- Consisting of approximately: - 13 x complete sets with ISO 30 tool holder, collet and cutting tool. - 34 x ISO 30 tool holder with collet. - 16 x tweezers. - 3 x clamping nuts for tool holders. - 2 x drilling aggregates with 4 heads, positionable 0°-360°. - 1 x milling aggregate with fixed inclination. - 13 x cutting tools. - 1 x Hydraulic Pump - Operating conditions of this item: unchecked. - This item is delivered loaded by truck. The costs of disassembly and loading are those specified as additional costs. Auction-ID: A7-50834-23

: gebraucht : 1992 : 010190 : prompt, Zwischenverkauf v : 17900 € : 1 : 320 mm : 650 mm : 160 mm : 40 mm : 192 mm : 205 mm : 5 : 5 MK : 16 : 48 - 2500 1/min : 24 : 0.02 - 0.63 mm/U : 0.006 - 0.2 mm/U : 0.25 - 8 mm : 0.2 - 4 : 150 mm : 100 mm : 40 mm : 3 MK : 85 mm : 2,4 / 3 kW : 1582 mm : 715 mm : 1245 mm : 680 kg Heidenhain 3-axis digital readout NEWRöhm 3-jaw chuck, 160 mm diameter, with internal and external jaws Quick-change tool post with one rectangular insert and one round insert Live centre Drill chuck Chuck guard Lead and feed screw guard Motor brake Coolant system Mounting feet Operating instructions in German BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our fa ...

turning diameter over bed: 297 mm turning diameter over slide rest: 160 mm turning length: 500 mm spindle bore: 36 mm turning speeds: 30 - 3550 U/min spindle nose: Kurzkegel Gr.5 DIN 55022 tailstock quill taper MT: 3 total power requirement: 2,2 kW weight of the machine ca.: 0,7 t dimensions of the machine ca.: 1,511,5 m On customer order - Private machine - Accessories: 3-jaw chuck 4-jaw chuck Collet chuck with lever clamping Multifix A + various holders Operating tool Various turning tools Original documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

greates pass round over bed: 320 mm turning dia. over face-slide: 198 mm centre height: 160 mm turning length: 650 mm spindle turning speed range: max. 3.000 U/min spindle passage: 40 mm tailstock quill taper MT: 3 quill stroke: 85 mm total power requirement: 4 kW weight of the machine ca.: 0,68 t dimensions of the machine ca.: 1582 x 715 x 1145 m Well-maintained machine from a vocational school Accessories/Equipment: - CE marking - WEILER 3-axis digital readout - Multifix tool post - 3 Multifix tool holders - KLOPFER 160 mm 3-jaw chuck - KLOPFER 160 mm 4-jaw chuck - Various sets of clamping jaws - Safety drive plate - 34 collets - Collet clamping system - Drill chuck - Live center - Various machine keys/wrenches - Machine mounts/feet - Work light - Chuck guard with electrical cut-off - Coolant pump - Operating manual and circuit diagrams The data for this ad was created with ModulMWS  ...

Used ESAB CXL-DX 3500 plasma cutting machine (2016). Table suitable for large format sheets with a usable metal area of 12,000 mm (length) x 2,500 mm (width). Specified cutting capacity: 360 amps. A complete extraction system is included. Key details - Manufacturer: Esab - Model: CXL-DX 3500 - Year of construction: 2016 - Table/work surface: 12,000 x 2,500 mm (metal length x metal width) - 1 x Plasma Specified Cutting Current/Power: 360 Amps -1 x Autogen - Included: complete extraction system

MOBILE HORIZONTAL BORING MILL Inv. No. 11.583B1 Make GIDDINGS & LEWIS Model 230-5 Table 812.5 x 2,812.5 mm Spindle diameter 75 mm Taper MT 5 Horizontal spindle travel Longitudinal travel Cross travel Vertical travel headstock 2000 mm RPM kW Volts 400 Cycles 50 Hz Including: Digital read out Auction-ID: A1-50718-23

Year 2004; with two presses; load cells and 4 m stacker, the machine has worked very little; it can process cables from a minimum section of 0.0 to 25 M SQM to a maximum of 2.5 M SQM Auction-ID: A1-50513-131

Machine is equipped with: - chip conveyor - tailstock - foot pedals - tooling as showed in pictures Auction-ID: A1-50690-15

NC HORIZONTAL BORING MILL Inv. No. 13.033A1 Make SCHARMANN Model WF132AX Table 1,500 x 3,000 mm Spindle diameter 132 mm Taper ISO50 Longitudinal travel table 3.000 mm Cross travel 1,500 mm Vertical travel headstock 1.750 mm W-Axis 950 mm RPM 16 – 1,250 kW 30 Volts 380 Cycles 50 Auction-ID: A1-50718-38

used bread slicer Treif Diskus SB, overhauled, knife sharpened, weight 225 kg, year of construction 2015, machine no. 609102.190467.124622, 50 Hz, 400 V, 0.9 kW, 2.25 / 10 A, 1.22 HP

Carousel milling machine Comec FGS-1T CAB Number of generators 1 Milling motor power: 5.5kw Cutter Speed: 7050rpm Tool min/max 120-200mm Spindle Diameter 40mm Maximum cutter height 115 mm Diameter of the processed material min/max 110-800mm Table Rotation Motor Power: 1.5KW Table speed 1.65-8.8 rpm Machine Dimensions 1600×1700×2600mm Machine Weight 1500kg Net price

Carousel milling machine Comec FGS-1T CAB Number of generators 1 Milling motor power: 5.5kw Cutter Speed: 7050rpm Tool min/max 120-200mm Spindle Diameter 40mm Maximum cutter height 115 mm Diameter of the processed material min/max 110-800mm Table Rotation Motor Power: 1.5KW Table speed 1.65-8.8 rpm Machine Dimensions 1600×1700×2600mm Machine Weight 1500kg Net price

Key data: 320 mm, 220 mm, 255 mm

Manufacturer: FANUC Model: Robocut Alpha-0iC A04B Year: 2006 Condition: Used Stock No: 9607 Control System: FANUC Series 180iS-WB Max. travel length of the X-axis: 320 mm Max. travel length of the Y-axis: 220 mm Max. travel length of the Z-axis: 255 mm Feed length in U-axis (+-): 120 mm Feed length in the V-axis (+-): 120 mm Maximum table load: 500 kg Machine weight: 2000 kg

Alfra VKS 125 cutting scissors with legs and gutters, various electrics Auction-ID: A1-50476-319

Used ALOUMIL press for cutting and punching aluminium profiles, air-operated (pneumatic drive). Used for cutting and punching aluminium profiles in the manufacture of aluminium windows and doors. Technical characteristics: - Brand: ALOUMIL - Pneumatic (compressed-air) operation Exact model and further technical specifications (capacity, dimensions, weight) are not confirmed for this specific unit - please contact us for details. Checked and ready to work Auction-ID: A7-50988-38

- Operating conditions of this item: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-50834-73

- Disc diameter 380 mm. - Table dimensions 1650 x 1030 mm. - Maximum cutting height approx. 120 mm. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-50834-45

Used ALOUMIL press for cutting and punching aluminium profiles, air-operated (pneumatic drive). Used for cutting and punching aluminium profiles in the manufacture of aluminium windows and doors. Technical characteristics: - Brand: ALOUMIL - Pneumatic (compressed-air) operation Exact model and further technical specifications (capacity, dimensions, weight) are not confirmed for this specific unit - please contact us for details. Checked and ready to work Auction-ID: A7-50988-37

Kinmatic 80-1A Percision Wire Cutter, M0.8 to M4, Manual Punching Machine with Digital Caliper Auction-ID: A1-50476-136

equipped with Hawa lever hand-held profile cutting device; table top; equipped with length stop; work table mounted on profile steel base; heavy plywood table top; equipped with base cabinet and drawer; including various electrical contents including power plugs; Auction-ID: A1-50476-255

2000W Halogen Cutout Halogen lamp CP43 2000W Opening angle: 15 to 40° Connectors: PC16 IP22 Included: Filter holder, hook, sling. Auction-ID: A1-50934-303

Profile steel base; steel underblade; heavy plywood top; 2x drawer; including Hawa cable tray cutter lever manually equipped with length stop; 3x socket; fluorescent lighting; Auction-ID: A1-50476-262

2000W Halogen Cutout Halogen lamp CP43 2000W Opening angle: 15 to 40° Connectors: PC16 IP22 Included: Filter holder, hook, sling. Auction-ID: A1-50934-302

Spiral rabbet (rebate) cutter for planer / jointer machines, reference 0940013ERP. Brand and dimensions are not stated in our catalogue. New old stock item. Further technical specifications are not confirmed for this specific unit - please contact us for details. Auction-ID: A7-50988-55

threading machine mounted on mobile base; tube cutting machine mounted on tubular steel base; Auction-ID: A1-50476-67