double cross cut used for sale

1 HORST KIND label cut and fold machine type ECO 2015, year 2014

For more specifications, see PDF.

For the purpose of pillow filling; mounted on profile steel mobile base;

Rated Input Voltage: 1P AC380V ±15% 50/60Hz Rated Input Current: 14A Rated input power: 9.2 KVA Open circuit voltage: 256V Output Current Setting: 20-60A Rated Output Voltage: 104V Cyclic Duration Factor: 60% Efficiency: 70% Insulation class: F Protection class: IP21 Arc discharge by contact

Additional information Compressed Air Plasma Cutting Machine Brand: Hyper Welding Type: CUT-120 Condition: Unused and in the original packaging Maximum cutting thickness: max. Cutting thickness 40 mm Connection: 380 volts Adjustable amperage: 20-120 amps Start: Ahead duty cycle: 60% duty cycle (120 A) Duty Cycle (%) 60 Efficiency (%) 85 Power factor 0.75 Insulation level H Protection class of the shell IP21S Recommend compressor pressure during cutting (B)

Manufacturer: Elumatec Type: MGS 72/30 Swivel range 0° - 45° infinitely adjustable to the left and right Resting points 15° - 30° - 45° Saw blade:: ø380mm Motor: 3 kW Speed: 2800 tpm Weight 120 kG Condition functionally tested

1 MÜLLER label cut and fold machine type LCFR2, year 2017

- technically efficient, ready to work – after full service - pneumatic profile clamping - manual feed

1 IMPERIA pinking machine type E800 (Zigzag cutting), knife width 830 mm, working width up to 800 mm, machine equipped with precise hand lever feed mechanism, serrated knife with 5 mm gauge, with security light guards, 3 x 380 V, 50 Hz, 2.2 kW machine with setting for 2 pattern dimensions (normally supplied with 1 only), machine delivered with total 2 knifes: 1 knife installed with gauge 5 mm, 1 knife spare 5 mm gauge, machine delivered with 2 new cutting boards (one to be used and one as spare)

Rated power: 9.2 KVA; Rated current: 14 A; No-load voltage: 256 V; Output current adjustment: 20-60 ; Rated output voltage: 104 V; Max cutting thickness: 20 mm; Cyclic duration factor: 60%; Efficiency: 70%; Insulation grade: F; Protection grade: IP21; Arc-start: Contact; 6094

Box size 400x245x305mm; 15A/86V - 40A/96V; IP21S; digital display;

Compressed Air Plasma Cutting Machine Maximum cutting thickness: 1-40 mm Current: 20-120 Amps Voltage: 310V Single-tube, full-bridge inverter technology, with sufficient output current for high-intensity operations, precisely preset cutting current + adjustable gas delay.

Mayrhofer cross-cut saw Capping height: 20 cm Total length: 7,8 Meter with 6 saws 6 x Motor 5,5 kW Type H90 0 pcs saw variable (+-20 cm) 3m saw fixed 4m saw fixed 4.5m saw fixed 5m saw fixed 6m saw variable (+- 20 cm) very good condition - immediately available from stock Location: Austria, 3525 Lugendorf

8500mm Bunker Loader 4500mm Discharge System Rofin DC025 2500w Year: 2006 Modification to Process upto Ø152.4mm Dust Extractor

Equipped with: gas hose/ including: oil lamp

Equipped with Rated Input Voltage: 1P AC380V ±15% 50/60Hz; Rated Input Strength: 29A; Rated input power: 19 KVA; Open-circuit voltage: 280V; Output current setting: 30-120A; Rated output voltage: 128V; Cyclic duty cycle: 60%; Efficiency: 80%; Insulation class: F; Protection class: IP21; Non-contact welding (arc formation): Yes; Unused in box

Year of construction: 2006 Burning hours: approx. 11,500 h! Power: 4kW CNC control: Mazatrol PREview Resonator: Panasonic Sheet size: 3000x1500mm In recent years, spare parts have been replaced for about 28,000 €. Additional equipment: Rotary head that makes it possible to mount different nozzles and lenses to cut different materials without having to retool the machine. Automated system for sheet metal loading and unloading

NC HORIZONTAL BORING MILL Inv. No. 13.033A1 Make SCHARMANN Model WF132AX Table 1,500 x 3,000 mm Spindle diameter 132 mm Taper ISO50 Longitudinal travel table 3.000 mm Cross travel 1,500 mm Vertical travel headstock 1.750 mm W-Axis 950 mm RPM 16 – 1,250 kW 30 Volts 380 Cycles 50

Compressed Air Plasma Cutting Machine Maximum cutting thickness: 1-40 mm Current: 20-120 Amps Voltage: 310V Single-tube, full-bridge inverter technology, with sufficient output current for high-intensity operations, precisely preset cutting current + adjustable gas delay.

Pile cutter with automatic paper pressing, 48cm cutting width .1 spare knives and cutting bars

Rated power: 9.2 KVA; Rated current: 14 A; No-load voltage: 256 V; Output current adjustment: 20-60 ; Rated output voltage: 104 V; Max cutting thickness: 20 mm; Cyclic duration factor: 60%; Efficiency: 70%; Insulation grade: F; Protection grade: IP21; Arc-start: Contact; 6094

Compressed Air Plasma Cutting Machine Maximum cutting thickness: 1-40 mm Current: 20-120 Amps Voltage: 310V Single-tube, full-bridge inverter technology, with sufficient output current for high-intensity operations, precisely preset cutting current + adjustable gas delay.

Refer to code 1049 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

6000 x 2000mm 6000w with transverse conveyor

Equipped with input power: 7.6 kVA; input voltage 1-phase 230 V AC 50 Hz; duty cycle 45%; protection class: IP21S; Max cutting thickness: 12mm steel; Unused in box

Unused Rated Input Voltage: 1P AC220V ±15% 50/60Hz Rated input current: 25A Rated Input Power: 5.5KVA Open circuit voltage: 243V Output current setting: 20-40A Rated output voltage: 96V Cyclic continuous factor: 60% Efficiency: 70% Insulation class: F Protection class: IP21 Arc flash due to contact Weight: 6.9KG Dimensions: 375 x 155 x 300

Rated Input Voltage: 1P AC220V ±15% 50/60Hz Rated input current: 25A Rated input power: 5.5 KVA Open circuit voltage: 243V Output Current Setting: 20-40A Rated output voltage: 96V Cyclic Duration Factor: 60% Efficiency: 70% Insulation class: F Protection class: IP21 Arc discharge by contact

Stock number: 3778 CUTTING LINE Manufacturer: MORGAN , Type: 1330 x 0.7 - 3.2 mm Specifications: Size scissors length 1330 mm Size sheet thickness 0.7 - 3.2 mm - Roller feed 2 pc dia. 100 rools Composed of: - Straightening machine 5 pc. dia 100 Reels - Drain reel 5 ton dia. 530-610 mm tone - Scissors Morgan 1500 x 3.2 mm Accessories: Coil trolley 5 ton Length: 6500 mm, Height: , Width: 33.00 mm, Weight:

Unused Rated Input Voltage: 1P AC380V ±15% 50/60Hz Rated Input Current: 14A Rated Input Power: 9.2KVA Open-circuit voltage: 256V Output current setting: 20-60A Rated Output Voltage: 104V Cyclic continuous factor: 60% Efficiency: 70% Insulation class: F Protection class: IP21 Contact arch striking Weight: 14.7KG Dimensions: 535 x 210 x 380

Equipped with mains voltage: 415 V AC ±15 %, 3-phase; Frequency: 50/60 Hz; rated power: 19.4 kVA; output current: nominal 120 A; duty cycle 60%; Efficiency: 0.85; IP23 degree of protection; cutting up to approx. 35mm; internal air pump; Transport 655x385x625mm 35kg; Unused in box

Unused Rated power: 9.2 kVA Rated current: 14 A Open circuit voltage: 256 V Output Current Adjustment: 20-60 A Rated output voltage: 104 V Maximum cutting thickness: 20 mm Cyclic Duration Factor: 60% Efficiency: 70% Degree of insulation: F Degree of protection: IP21 Bow start: Contact

Technical data of the parallel lathe Kramatorsk mod. 1A670 used: - Diameter on the bench: 2500 mm - Diameter above wagon: 2200 mm - Spindle diameter: 2500 mm - Distance between tips: 19000 mm - Pallet width with 4 guides: 2300 mm - Weight allowed between the tips: 100 tons - Speed: from 0 to 130 RPM - Motor power: 140 kW - Tailstock cast: Ø 400 mm - New transverse axis ball screws X: Ø 80 mm - CNC: FAGOR 8055 TC - Weight: 150 ton - Dimensions: 25 x 4 x 3.3 m

Rated power: 19 kVA; Rated current: 29 A; No-load voltage: 280 V; Output current adjustment: 30-120 A; Rated output voltage: 128 V; Max cutting thickness: 45 mm; Cyclic duration factor: 60%; Efficiency: 80%; Insulation grade: F; Protection grade: IP21; Arc-start: Contact 6093

Rated Input Voltage: 1P AC380V ±15% 50/60Hz Nominal Input Strength: 29A Rated input power: 19 KVA Open-circuit voltage: 280V Output Current Setting: 30-120A Rated output voltage: 128V Cyclic duty cycle: 60% Efficiency: 80% Insulation class: F Protection class: IP21 Non-contact welding (arc formation): Yes

Fiber laser machine YAWEI HLF with TOP equipment Laser power: 8kW Sheet size: 3000 x 1500mm automatic shuttle table Siemens touchscreen control with LAN/USB Sheet layer measurement Siemens Drives Precitec Auto Focus Procutter Cutting Head with Autofocus IPG YLS resonator with 8kW The machine will include "everything" 2 years warranty CAD CAM Software Libellula CUT Commissioning Delivery within Germany and Operator/software training offered. We even provide on-site support for unloading + insertion. The machine is a new machine and available immediately. An identical one can be tested at any time under power with us. In our showroom we have various laser machines from our manufacturers under power and various materials to test. We would like to invite you to send us your drawings or drawings. Cut your material. We have been the exclusive trading house and servi ...

Multi-knife mill with 16-blade rotor 6 stator knives Drive 90 kW With accessories

Multi-knife mill with 16-blade rotor 6 stator knives Drive 90 kW With accessories

On frame. Width 115 cm

Compressed air connection 6 bar

Unused Rated power: 9.2 kVA Rated current: 14 A Open circuit voltage: 256 V Output Current Adjustment: 20-60 A Rated output voltage: 104 V Maximum cutting thickness: 20 mm Cyclic Duration Factor: 60% Efficiency: 70% Degree of insulation: F Degree of protection: IP21 Bow start: Contact

HORIZONTAL BORING MILL (floor type) Inv. No. 11.474BM Make UNION Model BFP 125 Mach. No. 10386 Spindle Slide. Ø 125 mm Spindle Taper ISO 50 P.D.B. Horizontal Travel Spindle 1.000 mm Horizontal Travel Column 7.000 mm Vertical Travel Headstock 2,500 mm Cross Travel Column 450 mm R.P.M. 3.55 – 710 (27x) kW 25 Volts 380 Cycles 50 Including: Facing Head Ø 800 mm

Bread slicer Treif Primus Fusion -Bread slicer Trei Maschinenbau GmbH -Undercounter counter bread slicer -Model: Primus fusion -bread cutting machine -Cutting width adjustable from 5 to 14mm -220- 230 V -Year of construction: 2020 -Machine weight: 230 kg

Rated power: 9.2 KVA; Rated current: 14 A; No-load voltage: 256 V; Output current adjustment: 20-60 ; Rated output voltage: 104 V; Max cutting thickness: 20 mm; Cyclic duration factor: 60%; Efficiency: 70%; Insulation grade: F; Protection grade: IP21; Arc-start: Contact; 6094

Additional information Compressed Air Plasma Cutting Machine Brand: Hyper Welding Type: CUT-120 Condition: Unused and in the original packaging Maximum cutting thickness: max. Cutting thickness 40 mm Connection: 380 volts Adjustable amperage: 20-120 amps Start: Ahead duty cycle: 60% duty cycle (120 A) Duty Cycle (%) 60 Efficiency (%) 85 Power factor 0.75 Insulation level H Protection class of the shell IP21S Recommend compressor pressure during cutting (B)