126,614 used machines on RESALE, but how to find them? Machine Search
Thread cutting head with Strehler jaws, thread cutting die, Thread cutting machine, pipe thread cutting -inch thread: 1 - 2 inch -Transport crate -Weight: 11 kg
Thread cutting head with Strehler jaws, thread cutting die, Thread cutting machine, pipe thread cutting -inch thread: 1 - 2 inch -Transport crate -Weight: 17 kg
1 HOZA (Germany) pinking machine type ZEN 80 (Zigzag cutting), knife width 820 mm, working width up to 800 mm, new serrated knife with 6 mm serration gauge, machine equipped with precise hand lever feed mechanism, feed mechanism settable for 2 measures between 0-320 mm, with security light guards, 3 x 380 V, 50 Hz
Multifunctional punch, punch press, hole punch, pneumatic hole punch -operated: pneumatically -Year of manufacture: 1999 -Dimensions: 600/600/H1300 mm -Weight: 50 kg
Thread cutting machine, pipe thread cutter -for: Pipe size max. 2 inches -Cutting jaws: 1 inch -Drive: via 3 gearboxes -Dimensions: 550/360/H240 mm -Weight: 55 kg
Thread cutting machine, pipe thread cutter -for: Pipe size max. 2 inches -Cutting jaws: 2 inch -Drive: via 3 gearboxes -Dimensions: 550/360/H240 mm -Weight: 55 kg
Treif bread slicer Type: Discus 400 Circular knife digital control Year of construction 2010 Cutting width: 4 – 20mm with storage compartment 400V 50Hz Weight approx. 200kg Height: 110cm Width: 82cm Depth: 72cm
Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-3015-OE 1,5kW / VF1530-1500W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 40000mm/min - Maximum acceleration: 0.5G - Maximum load: 1200kg - Nominal power: 1.5kW - Energy requirements: 12.0kW - Source brand: MAX Photonics - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 - Length: 4500mm - Width: 2300mm - Height: 1920mm Cutting thickness - Carbon steel: Recommended thickness 12.0mm, maximum thickness 16.0mm - Stainless steel: Recommended thickness 5.0mm, maximum thickness 6.0mm - Aluminum: Recommended thickness 3.0mm, maximum thickness 4.0mm - Brass: recommended thickness 2.0mm, maximum thickness 3.0m ...
Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-3015-C2 6kW / VF1530-6000W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 120000mm/min - Maximum acceleration: 1.5G - Nominal power: 6.0kW - Energy requirements: 30.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 25.0mm, maximum thickness 30.0mm - Stainless steel: Recommended thickness 16.0mm, maximum thickness 20.0mm - Aluminum: Recommended thickness 12.0mm, maximum thickness 14.0mm Structure parts The machine is very stable thanks to its welded construction based on massive legs. Th ...
Cutter head, milling chuck, carbide cutter, indexable insert cutter -Diameter: 160 mm -Number of teeth: 10 - Carbide indexable inserts: 16 mm -Recording: SK50 -Weight: 14 kg
SPECIFICATIONS: Engine power HP: 3 Vertical leadership support Replacement tools available
Cutter head, milling chuck, carbide cutter, indexable insert cutter -Diameter: 125 mm -Number of teeth: 6 -Indexable inserts: Carbide -Recording: SK50 -Weight: 10 kg
Cutter head, milling chuck, carbide cutter, indexable insert cutter -Diameter: 200 mm -Number of teeth: 12 -Indexable inserts: Carbide -Recording: SK50 -Weight: 18 kg
End mill, indexable insert milling cutter, hedgehog cutter, tool holder, milling holder, milling tool -Diameter: 40 mm -Working height: 50 mm -Recording: SK50 -Weight: 4 kg
Cutter head, milling chuck, carbide cutter, indexable insert cutter -Diameter: 130 mm -Number of teeth: 10 -Indexable inserts: Carbide -Recording: SK50 -Weight: 10 kg
workpiece length ... 3065mm max. šWorkpiece width ... 1560mm tPlate thickness ... 20mm Laser power ... 3000W Fiber Axis Z ... 150mm L x W x H ... 9797 x 3757 x 2200mm Machine weight ... 10000kg The machine is in good condition, possible to test under power.
Treif bread slicer Type: Discus 400 Circular knife digital control Year of construction 2010 Cutting width: 4 – 20mm with storage compartment 400V 50Hz Weight approx. 200kg Height: 110cm Width: 82cm Depth: 72cm
Thread cutting machine, pipe thread cutter -for: Pipe size max. 2 inches -Cutting jaws: 1 inch -Drive: via 3 gearboxes -Dimensions: 550/360/H240 mm -Weight: 60 kg
workpiece length ... 3050mm max. šWorkpiece width ... 1525mm sheet thickness ... 19mm Laser power... 2500W Axis Z ... 300mm Axis A ... 360° Axis B ... 1.5M Axis C ... 360° Control Mazatrol L x W x H ... 9800x5000x2300mm Machine weight ... 14500kg The machine is in good condition, possible to test under power.
Shell end mill, indexable insert mill, hedgehog mill, tool holder, milling holder, milling tool -Diameter: 63 mm -Fresh height: 49 mm -Mounting hole: Ø 22 mm -Weight: 0.75 kg
Shell end mill, indexable insert mill, hedgehog mill, tool holder, milling holder, milling tool -Diameter: 40 mm -Working height: 35 mm -Recording: MK 4 -Weight: 1 kg
NEW HERBOLD granulator Universal mill – heavy design -Year of construction 1998 - made in stainless steel - from the technical center (machine was used exclusively for experimental/demonstration purposes) - Rotor diameter: 300 mm - Working width: 500 mm - 3 rows of knives
Inlet: approx. 300 x 300 mm Rotor width: approx. 280 mm Rotor blades: 3 Dzk8qe Stator knives: 2 Drive: 7.5 kW Double slope With roller feeder, electric switch box and soundproofing box
Agritec floor reversing milling machine UKO 40-120, for PTO 540 rpm, power requirement 18.5-45 kw (25-60 hp) Three-point attachment frame Cat.1, working width 115 cm, total width 142 cm, lateral displacement hydraulic 26 cm, this also allows use on walls, fences, etc. Equipment with trailing grid roller for perfect seedbed preparation. Weight approx. 412 kg. Incl. cardan shaft with friction clutch. 30 knives - all new, ready for operation, incl. cardan shaft with friction clutch. Further reversing milling machine 130 cm working width in stock as well as conventional tillers from 100 to 150 cm, ploughs, cultivators etc.
Equipped with: Digital computer program with TFT color screen Security photocells Central table with air Side tables with air - Perfecta BSH 3 pile lift ( 2011) - Baumann vibrating table with air removal roller - Unloader Perfecta BA 3N ( 2011)
-Massive construction, stainless steel beams and posts; -Dimensions: W=720 mm., L= 1250 mm., H= 1470 mm.; -Power: 4 kW, 400V, 50Hz; -Adjustable legs; -The machine is an analogue of the Magurit Fromat 042 guillotine; -Complete hydraulic system of the Hydac company. -Electrical part of Telemechanics; -Knives from Germany; -Reinforced design of the knives; The blades are as follows: two upper horizontal, one lower horizontal and three vertical. -Loading the blocks: the blocks of frozen meat are placed in a chute equipped with a pneumatic cylinder that lifts it for easier loading. -After cutting, the products are unloaded directly into 200 liter carts. -With a lifting device for the moulds -Complete with vertical dicing knives -Capacity: 2000 ÷ 2500 kg. / h. Loading the blocks:The blocks of frozen meat are placed in a chute equipped with a pneu ...
Guillotine for slicing frozen meat with a capacity of 8000 kg. per hour It can cut molds of frozen meat with a temperature of -15°C to -3°C without defrosting the product during processing. The processed product is unloaded directly into Laska type carts. Technical parameters: Models IB – 4 IB – 8 Productivity- kg / hour up to 4000 up to 8000 Capacity kW 15 15 Max. weight of pieces gr. 200 450 Min. block temperature: -18 °C -15 °C Block dimensions mm. 600 / 400 /200 Machine dimensions: length 1400 width 1130 height 1680 Weight of the machine kg. 720
CNC portal flame cutting machine Manufacturer: MGM Type: Cortina DS3100 Retrofit 2022 CNC control: MS300 Track width: 3,100 mm 1 oxy-fuel burner gas type as desired Track length: 5 or 6 m without table
SPECIFICATIONS: TRUMPF TruLaser 2525 - 4 kw (formerly Trumatic L 2530 plus) Working range: 2,500 x 1,250 x 115 mm Control: Siemens Sinumerik 840 D Laser power: 4,000 watts sheet thickness of mild steel: 20 mm sheet thickness stainless steel: 15 mm sheet thickness aluminium: 10 mm STANDARD: - Closed machine frame with integrated laser unit - TFT color screen - Position laser diode - Spraying device - Motion unit for high-precision machining - Additional highly dynamic axis Yp - Drives with maintenance-free three-phase servo motors - Closed beam guidance - Conveyors for small parts and waste - NitroLine - FlyLine - Penetration detection TRUMPF LASER: - CO2 laser TruFlow 3200 - High frequency excitation - Maintenance-friendly turbo radial blower - Gas mixer (integrated) - Laser power control - Logbook function laser CUTTING HEAD: - Laser cutting ...
Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Outer diameter: 180 mm -Quantity: 2 cutters -Bore: Ø 35 mm -Price: complete -Weight: 9.5 kg
Tip height: 250 mm Center width: 1500 mm Circulation Ø: over bed 500 mm Spindle bore: 63 mm Spindle holder: Size 8 Mounting cone tailstock: 5 MK Spindle speeds: 170 - 2240 rpm Feeds: longitudinal/flat 0.014-1/0.0063-0.45 mm/U Thread pitches: 0.1 - 112 mm electrical connection: 380 V, 7.5 kW Space requirement: 2300 x 1000 x 1400 mm Weight: 2360 kg
Disc cutter, saw blade, cutter -various: diameters -Type: HSS/E Price: per set -Quantity: 2 sets available -Weight per set: 3 kg
Disc cutter, saw blade, cutter -various: manufacturers -Various diameters: Ø 45 mm - Ø 90 mm, width 1 mm - 8 mm Type: HSS -Sale: only complete set -Weight: 8 kg
Radius cutter, milling cutter -Finish cutter -Various: Diameter -Various: Manufacturers -Type: HSS and SS Quantity: 16 pieces -Sale: only complete set -Weight: 9 kg
WE OFFER AN NICE CONDITION LVD , WE CAN MAKE FOR CUSTOMER AS WELL START UP OF MACHINE INCLUDING TRAINING CUTTING CAPACITY 4KW CUTTING PLATES 6000 X 2000 MACHINE WAS COMPLETE OWERHAULED 2 YEARS AGO - SERVIS COST WAS 35000 EUR LAST SERVICE WAS MADE 6 MONTHS AGO MACHINE RUNNING IN THE PRODUCTION TILL FIRST WEEK IN MARCH 2022 WE OFFER MACHINE LOADED ON TRUCK. NEEDS 2 TRUCK FOR TRANSPORT, NORMAL TRUCK FOR CLIENT WE CAN ORGANIZE TRANSPORT AS WELL WE OFFER MACHINE FREE LOADED ON TRUCK. LASER- GE FANUC C4000 - MODEL E TRANSPORT FOR CUSTOMER WE CAN ORGANIZE AS WELL
Radius cutter, milling cutter -Finishing cutter -Various: Diameter -Various: Manufacturers -Type: HSS and SS -Quantity: 17 pieces -Sale/Price: complete -Weight: 5 kg
SAF OPTITOME 15 CNC plasma cutting machine was built in France in 2003. The machine is used to cut shapes in workpieces made of stainless steel, mild steel or aluminium. Depending on the previously choiceed nozzle, workpieces can have a thickness from 2 or 3 mm up to 18 mm. The high cutting quality is achieved thanks to the use of a lightweight and rigid transverse beam with efficient drive, mounted on an extremely rigid and robust machine frame. The installed working table with dimensions (L x W) of 3000 x 1500 mm allows the reduction of mechanical stresses arising during thermal cutting or sheet loading/unloading. The plasma cutting machine is supplied with equipment consisting of among others: a NERTAJET HP 125 plasma source with a power of 125 A and a DIGISAF 100 CNC control. Technical data of the SAF OPTITOME 15 plasma - materials to be cut: stainless steel, mild steel, alumi ...
Bandwidth.. 1,500 mm Band thickness. 0.7 - 4.0 mm Coil weight... 20 to. Velocity 14 m/min. Working direction right/left
3 trimmers horauf SN140, automatic , in very good condition, year 99
Cutting device, pneumatic press, punch -Type: 290 908 -Max. pressure: 8 bar -Dimensions: 300/340/H270 mm -Weight: 25 kg
Bread cutter Model: Varia Integra Pro Model for installation in the sales counter! Simple operation via touchscreen 240 discs/min Cutting width/bread length 380mm Circular knife machine manual operation Disc thickness adjustable from 4 - 30 mm Dimensions: 805/849 x 720 x 860/950 mm, WxDxH Bread dimensions max: 380 x 340 x 160 mm L x D x H DGUV V3 called Connection 230V,1 kW New machine with 12 months warranty
Thread cutting chuck, thread chuck, tap chuck, thread cutting apparatus -with slip clutch -Integrated reversing gearbox with quick return -Thread cutting sizes: M5-M20 -Recording: MK4 -Dimensions: 380/95 mm -Weight: 4.1 kg
Cutter head, milling chuck, carbide cutter, indexable insert cutter, face milling head, milling head -Diameter: Ø 100 mm -Number of teeth: 6 -Indexable inserts: Carbide -Recording: SK50 -Weight: 4.5 kg
Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Outer: Ø 180 mm -Height: 35 mm -Radius -Socket: Ø 30 mm -Weight: 5.6 kg
CNC Portal Plasma Cutting Machine Manufacturer: Messer Type: Multitherm 4000 CNC control: Global Control Plus Year of construction: 2008 Retrofit: 2019 Suction table: 2,000 x 3,000 mm 1 oxy-fuel burner ALFA 1 plasma torch Power source Kjellberg HiFocus 280i Filter system Z-Line 9 ZDC
maximum number of results exceeded
please refine your search
