double cross cut used for sale

Specifications: Speed: 2800 1/min Saw blade: ø 380 mm Motor power: 3000 W Roller conveyor, approx.: 128 mm Weight, approx.: 200 kg Dimensions (WxDxH), approx.: 1760 x 800 x 1680 mm

Workpiece dimensions up to approx. 5 m. length, 250 mm width Sliding blocks for possible loading with singulator Transverse transport with 5 parallel driven belts, approx. 1.5 m in length, motor 0.37 kW Intermediate distance x 1m25 x 0m80 x 0m80 x 1m00 x 4 perpendicular stop rollers 4 non-driven feed rollers 1 Interroll driven feed roller, built-in motor 0.37 kW, speed 0.20 m/s Working height 70 cm Electrical cabinet not included

A complete baling press system is for sale, consisting of a chain belt conveyor, the baling press with wire stations and bale chute. Technical data baler: Manufacturer BOA Type Impress D130.110.B.5-(5R).1.6 Year of construction 2009 Press power main press 127 tons Specific press capacity 10,7 kg/cm² Working pressure 280 bar Feed channel 1.620 x 972 mm (l x w) Press volume / cycle 4,1 cbm Volume throughput without load up to 865 cbm/hour Cycle time under operating conditions 22 sec. Press stroke 2.900 mm Bale size 1.100 x 1.100 mm (w x h) length adjustable Driving power 2 x 55 kW Connected load 132 kW Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm up to 17 to/h bulk weight of 50 kg/cbm up to 29 to/h bulk weight of 100 kg/cbm up to 37 to/h bulk weight of 150 kg/cbm up to 51 to/h Bale weight up to 1.200 kg Volume hydraulic oil ...

- Block Units: 3 - Number of modules: 18 - Filter area: 180 m2 - With automatic cleaning - Available from the end of May 2024 (still in operation until then) - Machine in good condition

Specifications: - Saw blade dimensions 275 x 2 x 40 mm - 2 saw blade spindle speeds 44 + 88 rpm - Cutting range at 90° around 90 mm - flat 110 x 60 mm - Mitre adjustable up to 45 ° - Material vice - Drive 400 V / 1.5 / 1.8 kW - Coolant device - Space requirement approx. W 600 x H 1400 x D 900 mm - Weight approx. 200 kg

Thickness gauge, coating thickness gauge -Manufacturer: Elcometer, cross-cut device with case -Type: Elcometer 107 -Material: stainless steel / aluminum -Accessories: see photos -Dimensions: 300/270/H75mm -Weight: 1.1 kg

Description: Cross table with turntable Table length 430 mm Table width 240 mm x-way 225 mm y-way 160 mm Table height 160 mm T-slots 12 mm Weight 45 kg Dimensions L x W x H 0.6 x 0.45 x 0.2 weight approx.: 45 kg, Approx. Onsite Dimension. (l x w x h): 600 x 450 x 200 mm

Description: Cross table with rotating plate Table length 225 mm Table width 175 mm x-way 120 mm y-way 110 mm Table height 140 mm T-slots 12 mm Weight 17.5 kg Dimensions L x W x H 0.35 x 0.35 x 0.22 mm Approx. Onsite Dimension. (l x w x h): 350 x 350 x 220 mm, weight approx.: 17,5 kg

Description: 'Cross table with rotating plate Table length 600 mm Table width 240 mm x-travel 370 mm y-way 130 mm Table height 165 mm Weight 60 kg Dimensions L x W x H 0.8 x 0.45 x 0.2 mm Approx. Onsite Dimension. (l x w x h): 800 x 450 x 200 mm, weight approx.: 60 kg

Description: Cross table with turntable Table length 330 mm Table width 220 mm x-way 210 mm y-way 125 mm Table height 150 mm T-slots 12 mm Weight 33 kg Dimensions L x W x H 0.41 x 0.35 x 0.22 mm Approx. Onsite Dimension. (l x w x h): 410 x 350 x 220 mm, weight approx.: 33 kg

Description: Schimpke DK 115 coolant system 2 cooling circuits Approx. Onsite Dimension. (l x w x h): 1,400 x 100 x 1,800 mm, weight approx.: 400 kg

Overview The tangential filter system was built in 2021 by the Spanish company sefiltra and used for the filtration of beer. The owner had purchased all the equipment to set up a microbrewery but then decided to shift the production of his beer to a bigger brewery, producing for him.  Techn. details  Filtration system is mounted on stainless steel frame with rollers  Control system: Siemens S7  4 filter cartridges  Recirculation pump CIP connection options Filters particles from 300 µm

Brand: GME Bavelloni Type: 2x Double Edger Model: MB 12 Linea, incl turning tables Construction year: 1995 Length mm: 4400 Width mm: 2800 Height mm: 2200 Transport size L x W x H: 4,4 x 2,8 x 1,3 Number of spindles: 4 x 12 spindles Condition machine : Working disassembled Photos/film available: Photos and video available Combi with: GME Triulzi Washing Machine Horizontal (23013)

Manufacturer: Hüllhorst, Year: ca. 1970, Control: hand, Width adjustment manually: yes, Action controlled: no, Cutting width max mm: 1200, Sägeblätter schwenkbar bis ° : no, Cutting hight max mm: ca.100, Cutting lenght max mm: 140, rotations controlled: 6000, Saw blade diameter max mm: 450, Main engine kW: ca.4, Year :ca. 1970

SECOND-HAND DOUBLE SIDED CUTTING SAW PERTICI TYPE UNIVER 330IP - CE RULES - working length 3300 mm - tilting blades 45° - n. 2 motors 1.1 kw - blade diam. 330 mm - v. 380/50 - sn 96T233 - year 1996

SECOND-HAND DOUBLE SIDED CUTTING SAW PERTICI TYPE UNIVER 330IP - CE RULES - working length 3300 mm - 4.5 kw - blade diam. 330 mm - v. 380/50 - sn 99T318 - year 1999

SECOND-HAND DOUBLE SIDED CUTTING SAW COMEC MOD. TD1200 - CE RULES - n.2 motors 2 hp - n. 2 blades diam. 350 mm - min / max working length 220/1200 mm - cutting inclinations: horizontal +/- 35°; vertical +/- 35° - volt. 380/50 - year 1995

SECOND-HAND DOUBLE SIDED CUTTING SAW COMEC MOD. TD1200 - CE RULES - n.2 motors 2 hp - n. 2 blades diam. 350 mm - min / max working length 220/1200 mm - cutting inclinations: horizontal +/- 35°; vertical +/- 35° - volt. 380/50 - sn 961227 - year 1996

K+G Wetter Cutmix 70 STL bowl cutter, 70 liters bowl chopper, all stainless steel, membrane keyboard, variable knife speed up to 5.000 rounds per minute, mixing speeds forwards and reverse, knife shaft brake electrically operated ,knife head with 6 knives, bowl with highest filling level, noise reduction cover. You are very welcome to test the machine in Koblenz, Germany.

Kilia Supreme Cut 200 ltr., 200 liters bowl cutter, bowl and bowl-cover stainless steel, year of manufacture 2011, hydraulic noise reduction cover, knife shaft brake electrically operated, separate stainless steel electric control cabinet, membrane keyboard, variable bowl speed, variable knife speed, variable mixing speed forwards and reverse, cleaning system, knife head with 6 knifes, hydraulic loading device for 200 liter bins, hydraulic unloader. You are very welcome to inspect and test the machine.

K+G Wetter vacuum Cutmix 120 STL, model VCM 120 ,120 liters vacuum cutter, variable knife sdpeed, 2 bowl speeds, mixing speed forward and reverse, variable bowl speed, unloader manually operated, hydrlauic unloading device, knife cover electrically operated, with cooking facility. Further Information on demand. You are very welcome to test the machine in our facility in Koblenz, Germany.

Seydelmann cutter 120 liter, type K 120 AC Completely made of special stainless steel 120-liter bowl made of stainless steel Frequency speed regulator 2 bowl speeds – fast and slow Knives speed frequent speed regulation (6 speed) Unloading device: left side Main cover is made of special steel, stainless steel Noise-canceling cover made of stainless steel Distribution cabinet made of special steel, inside the machine 6 pieces Knives Machine dimensions in cm: width: 190 depth: 150 height: 180 Main motor power: 40 kW Voltage: 400 V, 50 Hz Delivery time: 30 working days after advanced payment

Seydelmann cutter 90 liter, type K 90 AC Completely made of special stainless steel 90-liter bowl made of stainless steel 2 mixing speeds 2 bowl speeds – fast and slow Knives speed frequent speed regulation (6 speed) Unloading device: left side Main cover is made of special steel, stainless steel Noise-canceling cover made of special plastic Distribution cabinet made of special steel, inside the machine 6 pieces Knives Machine dimensions in cm: width: 200 depth: 170 height: 160 Main motor power: 28 kW Voltage: 400 V, 50 Hz Delivery time: 30 working days after advanced payment

Rex cutter 65 liter Outside of machine made of special stainless steel 65-liter bowl 2 knives speeds 2 bowl speeds – fast and slow Main cover is made of special steel, stainless steel Noise-canceling cover made of special plastic Distribution cabinet made of special steel, inside the machine 6 pieces Knives Machine dimensions in cm: width: 135 depth: 90 height: 130 Main motor power: 18 kW Voltage: 400 V, 50 Hz Delivery time: 10 working days after advanced payment

Laska vacuum cutter 330 liter Completely made of special stainless steel 330-liter bowl made of stainless steel Integrated vacuum pump Integrated loader for meat bins 2 mixing speeds 2 bowl speeds – fast and slow Unloading device: left side Main cover is made of special steel, stainless steel 6 pieces Knives Machine dimensions in cm: width: 310 depth: 400 height: 285 Weight: 5550 kg Main motor power: 120 kW Voltage: 400 V, 50 Hz Delivery time: 30 working days after advanced payment

Bowl cutter Alexanderwerk is equipped with a head with 6 knives, which easily cuts the product and has a noise absorbing cover made of transparent special plastic. The cutter is suitable for every food industry plant where cutting and emulsion of the product is required. Manufacturer: Alexanderwerk Model: 100l Height: 1500 mm Width: 1700 mm Length: 1500 mm Weight: 500 kg Capacity: 100 l Electric power supply: 400V 50Hz 3N

35 litre bowl cutter stainless steel 2 speed 1400/2800 2 machines year of construction 2013 and 2015

Model C325 – 2 Serial No C325 - 124 Year of manufacture 2002 All stainless steel construction Stainless steel bowl Capacity 325 litres 2 speed knife shaft 46 Kw/61 Kw 2 speed bowl, power 2.75/3.43 Kw Hydraulic operation of the following Noise cover up and down Knife head cover up and down Unloader in and out Unloader disc hydraulic driven Loader up and down Offered fully refurbished Ready for delivery 6 weeks from confirmed order and deposit

Kremer Grebe cutter 100 liter 100-liter bowl 2 mixing speeds 2 bowl speeds – fast and slow Unloading device: left side Main cover is made of special steel, stainless steel Noise-canceling cover made of special plastic Distribution cabinet made of special steel, inside the machine 6 pieces Knives Machine dimensions in cm: width: 190 depth: 130 height: 130 Main motor power: 22 kW Voltage: 400 V, 50 Hz Delivery time: 30 working days after advanced payment

Cutter K+G Wetter CutMix 200 STL with load for 200 liter standard car and ejector, 200 liter cutter, surface, bowl lid with storage wall and bowl stainless steel, noise protection cover, knife shaft brake, main switch, membrane keyboard, infinitely adjustable knife shaft speed (40-4,400 rpm), infinitely adjustable bowl speeds (5-18 rpm), infinitely adjustable mixing gear backwards (40-500 rpm), digital display knife shaft temperature bowl, K+G weather CM 200 STL

Cutter K+G Wetter CutMix 120 STL with load for 120 liter standard car and ejector, 120 liter cutter, surface, bowl lid with storage wall and bowl stainless steel, noise protection lid, knife shaft brake, main switch, membrane keyboard, infinitely adjustable knife shaft speed (40-4,400 rpm), infinitely variable bowl speeds (5-18 rpm), infinitely adjustable mixing gear backwards (40-500 rpm), digital display knife shaft temperature bowl, rated power 42.5 kW, K+G weather CM 120 STL

Laska Cutter Variable Speed Mixing back and forth Complete stainless steel

Alexanderwerk cutter 65 liter Outside of machine made of special stainless steel 65-liter bowl 2 mixing speeds 2 bowl speeds – fast and slow Main cover is made of special steel, stainless steel Noise-canceling cover made of special plastic Distribution cabinet made of special steel, inside the machine 6 pieces Knives Machine dimensions in cm: width: 120 depth: 100 height: 130 Main motor power: 15 kW Voltage: 400 V, 50 Hz Delivery time: 30 working days after advanced payment

2 knife speeds 2 mixing speeds 2 separate bowl speeds emptier With loader Auto command 3000 K yoc 2017 only 1.603 running hours 125 kW total connected power

Vacuum cutter 325 Litre(s) Blade speed infinitely variable, 60 – 4100 rpm Mixing speed infinitely variable Cutter bowl speed infinitely variable Engine power: 120 to 137 kW Noise protection cover V2A Electro-hydraulic feeding electro-hydraulic meat ejector

For CNC plasma and cutting cutting systems 1 stueck Sideros suction system type ECO 4 HC, max. 5000m3/h for plasma and firing cutting systems for suction firing table from 1.5 m width (at 500 mm module width) APPLICATION dust and smoke extraction systems on plasma and firing cutting systems ( plasma up to 130 amps). Cutting of steel and stainless steel sheets. suction and filter system with integrated fan, automatic, dust-duty -cleaner filter cleaning, Siemens Simatic system control and PTFE membrane filter. The system is designed for a volume flow of max. 5,000 m3/h and a maximum of 2,500 Pa. filter class M at a separation degree of > 99.9% (BIA use category U,S,G,C). dimensions: Height: 2,100 mm depth: 1,413 mm Width: 1,413 mm Weight: 620 kg Air entry: NW 200 - 250 mm Price 6,990.00 EUR (price + VAT ex works, excluding pipelines, installation and commissioning);  ...

Seydelmann K 60 Ultra, 60 liters bowl cutter, operation via knee lever switches, separate digital display, noise protection cover, central lubrication point for knife-shaft, 2 knives speeds, 2 bowl speeds, 2 mixing speeds forward, knife head with 6 knives. The machine is immediately available and can be tested in Koblenz, Germany.

Karl Schnell emulsifier Power: 9 kW

K+G Weather SM 120 T2M-R, 120 litre cutter, surface, bowl lid with storage wall and bowl stainless steel, noise protection cover, knife shaft brake, main switch, membrane keypad, knife shaft speed 2-tourig, 2 bowl speeds, mixing gear forward and backward, temperature-end shutdown, digital display knife shaft temperature bowl, knife head with 6 knives. The machine is currently undergoing refurbishment and will be available shortly.

Treif Portion cutter Model: 1943 1998. Stainless, infeed chamber 600mm length x 180mm width x 140mm depth, up to 300 cuts a minute, it is possible to cut large bone-in as well as boneless products, such as bacon, spare ribs, chops and "T-bone" steaks, or dairy products, such as cheese, either fresh, chilled or deep-frozen to - 4°C.

K+G Wetter SM 65 STL bowl cutter, 65 liters bowl chopper, bowl and bowl-cover stainless steel, noise reduction cover, knife shaft brake electrically operated, main switch as well as electric control cabinet integrated, membrane keypad, variable knife Speed, 2 bowl speeds (9/18 UpM), mixing speeds forwards and reverse, temperature switch off function, knife head with 6 knives. The machine is immediately available and can be tested like in Koblenz, Germany.

Seydelmann K 60 Ultra, 60 liters bowl cutter, operation via knee lever switches, separate digital display, noise protection cover, central lubrication point for knife-shaft, 2 knives speeds, 2 bowl speeds, 2 mixing speeds forward, knife head with 6 knives. The machine is immediately available and can be tested in Koblenz, Germany.

Laska KU 65 cutter, bowl capacity 65 liters, microprocessor control, membrane keyboard, stepless speed control, 4 freely programmable fixed speeds, mixing gear forward and backward continuously, 6 knife head, electric knife shaft brake, noise protection cover. The cutter can be tested in 56070 Koblenz.

Kramer + Grebe SM 45 STL, 45 liters bowl cutter, all stainless steel, noise reduction cover, knife shaft brake electrically operated, main switch as well as electric control cabinet integrated, 2 knife speeds, mixing speed forwards, 2 bowl speeds, standard knife head with 6 knives. The machine is immediately available and can be tested in Koblenz, Germany.

Kilia Meister Plus 50 bowl cutter, 50 liters bowl of stainless steel, almost completely made of solid stainless steel, Siemens control, noise absorbing cover of transparent special plastic, central point of lubrication for knife shaft, balanceable and exchangeable knife head, variable knife speed, mixing speeds forwards and reverse, knife head with 6 knives. You are very welcome to inspect and test the machine in our facility in Koblenz, Germany.

Type Cutters Warranty 12 months Height 2350 Width 2200 mm Length 1910 mm Weight 4000 kg Voltage Electrical: 400V 50Hz 3N Installed Power 57.25 kw Main material Stainlees Steel Time of realisation in stock Cutter Type Bowl Cutter Cutter made of Stainless steel Bowl made of Stainless steel Bowl capacity 200 l Efficiency 100-140 kg/cycle Knives amount 6 pc. Knife shaft revolutions 900/1800/3600 rpm Bowl revolutions 7.5/10/15 rpm

Duker Rex RK 45, 45 liters bowl cutter with brand new noise reduction cover, 2 knife speeds, mixing 2 speeds, 2 separate bowl speeds. You are very welcome to test the machine in our facility in Koblenz, Germany.

MADO MSM 764 SUPRA 50 M, 50 Liters bowl cutter, 2 knife speeds, mixing speed forward and reverse, 2 bowl speeds. You are very welcome to test the machine in our facility in Koblenz, Germany.

K+G Wetter SM 65 T2M-R, 65 liters bowl cutter, bowl and bowl-cover stainless steel, noise reduction cover, knife shaft brake, main switch as well as electric control cabinet integrated, membrane keyboard, 2 knife speeds 1.500 – 3.000 rounds per minute, mixing speeds forwards and reverse, knife head with 6 knives. You are very welcome to test the machine in Koblenz, Germany.

K+G Wetter SM 90 STL bowl cutter, 90 liters bowl chopper, bowl and bowl-cover stainless steel, noise reduction cover, knife shaft brake electrically operated, main switch as well as electric control cabinet integrated, membrane keypad, variable knife speed up to 5,000 rpm., 2 bowl speeds (9/18 UpM), mixing speeds forwards and reverse (40-500 UpM), temperature switch off function, knife head with 6 knives, power 32 kW. You are very welcome to test the machine in our facility in Koblenz, Germany.