double cross cut used for sale

1 pc. universal whetstone (20mm wide) 1 pc. whetstone for HSS steel (40mm wide) Grinding wheel diameter 150 mm Grinding wheel width 20 + 40 mm Mounting diameter 12.7 mm Connection voltage 230 V Motor power 0.25 KW Weight 16 kg Dimensions L x W x H 0.37 x 0.2 x 0.24 m Condition: never used / new (5) Auction-ID: A1-45681-784

Angle-adjustable table, disc diameter approximately 790mm. Auction-ID: A1-45188-172

Double bench grinder: Grinding grit: 36 and 80 Grinding wheel diameter max. 150 mm Grinding wheel width 25 mm Mounting diameter 32 mm Connection voltage 230 V Motor power 0.5 KW Condition: never used / new (5) Auction-ID: A1-45681-789

Double bench grinder: Grinding grit: 36 and 80 Grinding wheel diameter max. 200 mm Grinding wheel width 32 mm Mounting diameter 30 mm Connection voltage 230 V Motor power 0.9 KW Condition: never used / new (5) Auction-ID: A1-45681-708

Information: - Special package free shipping - within Germany (without islands) - Complete set fence package 375 m - Height 2,030 mm - Thickness 6/5/6 mm - Galvanized + RAL 7016 - Anthracite grey coated - 150 double rod mats W: 2,510 x H: 2,030 mm 6/5/6 mm MW 50 x 200 mm RAL 7016 - 151 pieces of fence posts 60 x 40 x 2 x 2,200 mm with floor recess approx. 600 mm for concreting - 151 pieces hook cap (1 piece per lot) - 453 pieces U-bracket sets (3 pieces per post) Seller's Note: - It is new! - Forklift available on site for easy and fast charging. - Suitable gate system (1.25 and 3.00 m passage width) possible on request for an extra charge - Suitable privacy screen available on request for an extra charge - Special quantities from 75 m upwards possible on request for an extra charge - Material available on request in hot-dip galvanized and RAL6005 - Material heights ...

A Frenco workshop gear testing device is available. Bed length: 590mm, min. center distance: 45mm, max. center distance with fine adjustment/without fine adjustment/without intermediate plate: 105mm/155mm/320mm, repeatability: 1.5µm, intermediate plate length: 210mm, max. worm diameter: 78mm, center distance (worm lengths): 0mm-220mm, measuring table dimensions X/Y/Z: 800mm/700mm/940mm. Machine dimensions X/Y/Z: approx. 1200mm/800mm/1750mm, weight: approx. 330kg. Documentation available. An on-site inspection is possible.

Information: - Special package free shipping - within Germany (without islands) - Complete set fence package 900 m - Height 2,030 mm - Thickness 6/5/6 mm - Galvanized + RAL 7016 - Anthracite grey coated - 360 double rod mats W: 2,510 x H: 2,030 mm 6/5/6 mm MW 50 x 200 mm RAL 7016 - 361 pieces of fence posts 60 x 40 x 2 x 2,200 mm with ground recess approx. 600 mm for concreting - 361 pieces hook cap (1 piece per lot) - 1,083 U-bracket sets (3 pieces per post) Seller's Note: - It is new! - Forklift available on site for easy and fast charging. - Suitable gate system (1.25 and 3.00 m passage width) possible on request for an extra charge - Suitable privacy screen available on request for an extra charge - Special quantities from 75 m upwards possible on request for an extra charge - Material available on request in hot-dip galvanized and RAL6005 - Material heights of  ...

angle: 0° - 90°; max cutting length: 1370 mm; easy handling and quick mounting on the carriage of the saw for fast and stepless production of miter cuts on narrow and short workpieces at any angle from 0° to 90

PSS Svidnik a.s. double shaft paddle mixer, type: SM 700, serial number: 07, year of construction: 2014, 6 kW, volume: 700 liter, weight: 1750 kg, dimensions: 2350 mm x 1400 mm x 2280 mm.

Two-disc grinder Estimated weight: 30 kg Approximate dimensions: 400x800x1200 mm Auction-ID: A7-44996-145

Three-phase asynchronous motor, 2800 rpm, 220 V.Serial: 143 Estimated weight: 75 kg Approximate dimensions: 1200x800xh1500 mm Auction-ID: A7-44996-146

Double grinder: 2800 rpm Estimated weight: 75kg Approximate dimensions: 1200x800x1300 mm Auction-ID: A7-44996-144

Renault Traffic Load capacity: 735 kg Towing capacity: 2 Ton Light Cargo Euro 5 Towbar Double Cab Sliding door Electric windows Electrically adjustable exterior mirrors Central locking Radio/CD Cup holders Roof racks Non-smoking car Auction-ID: A3-43367-5020

with hydro system for trailer - double (working) air conditioning - automatic transmission - neat truck that starts, brakes and drives smoothly - very slight (repaired) damage at the rear (see photos) and slight wear of the driver's seat. Auction-ID: A3-43367-10793

CONTROLS   conventional WORKING RANGE (DOUBLE DISC GRINDER)   Grinding wheel diameter: 750 mm   grinding width max. - throughfeed grinding: 150 mm   material thickness max. - throughfeed grindin: 70 mm GRINDING SPINDLE 1   spindle revolutions (max): 610 /min GRINDING SPINDLE 2   spindle revolutions (max): 610 /min COMPONENT-FEEDER   Feeder Design: rotary Feeder DIMENSIONS / WEIGHTS   space requirements -left/right-: 5230 mm   space requirements -front/back-: 4460 mm   total height: 3600 mm   total weight approx.: 11000 kg Machine is dismantled and stored

CONTROLS   CNC controls SIEMENS 810 T WORKING RANGE (DOUBLE DISC GRINDER)   Grinding wheel diameter: 750 mm   grinding width max. - throughfeed grinding: 180 mm   material thickness max. - throughfeed grindin: 30 mm   grinding width max. - plunge cut grinding: 180 mm   material thickness - plunge cut grinding: 30 mm COMPONENT-FEEDER   Feeder Design: rotary Feeder ELECTRICAL SPECIFICATIONS   total power consumption: 95 kW Scope of delivery: - Machine - div. flanges and used grinding wheels - Measuring control IONIC 17A Optional: - 270 pcs. grinding segments 22A 100 S 6 B20 - 289 pieces grinding segments 14C 80 L 10 B30 Machine is dismantled and stored

Hydraulic extendable up to 6 meters long. Electric/hydraulically operated Auction-ID: A1-40134-276

13 pieces of double locker cabinets. 60cm width per unit of 2 lockers. Auction-ID: A1-40104-111

Load capacity: maximum. 500 kg Including: assembled plastic plate: 115 x 130 (L/W) Auction-ID: A1-45762-23

Grinding wheel diameter max. 300 mm Speed 1390 rpm Connection voltage 400 V Motor power 2.2 KW Condition: unchecked Auction-ID: A7-45761-739

Transporter / flatbed vehicle with double cab Make / Model: Opel Movano Registration date: 12.01.2018 Year of construction: 2018 Engine: 2.3 CDTI BiTurbo diesel engine Displacement: 2299 cm³ Power: 125 kW (170 hp) Fuel: Diesel Emission standard: Euro 6 Transmission: Manual Propulsion: Front-wheel drive Mileage: 173,877 km (when photographed) Body: Double cab with loading area Seats: 7 Doors: 4 Color: Red Steering Wheel: Left Curb weight: 2,205 kg Payload: 1,295 kg Towing capacity: unbraked: 750 kg braked: 2,500 kg Documents: Vehicle documents available Export: self-pick-up / transfer possible Condition: used, ready to drive Tyres: partly worn (2 tyres close to wear limit) Maintenance: Oil change recommended Technical inspection/TÜV: valid until February 2028 Auction-ID: 046-WKV-4

Load capacity: maximum. 500 kg Auction-ID: A1-45762-90

Mercedes-Benz 407D flatbed vehicle (former THW / disaster control) Year of manufacture / first registration: 13.12.1984 Vintage vehicle approx. 69,000 km (read) OM616 diesel engine (2,350 cc), manual gearbox Engine running Double cabin (crew cabin) Flatbed with tarpaulin and bow body Trailer hitch available Roof rack with solar panel Used condition Age-related paint wear and scratches Rust spots present (chassis, rims, underbody, wheel arches) Tarpaulin used, but available Interior overall well maintained Partial renovations in the interior (rear area) Fittings partially open / not completely original Vehicle comes from authorities (THW / disaster control) Rare version with double cab Suitable for restoration, remodeling or export Registration papers available Auction-ID: 04K-8AD-1

Load capacity: maximum. 500 kg Auction-ID: A1-45762-74

Technical data Manufacturer: OTEC Präzisionsfinish GmbH Type: CF 2x50 Year of Make: 2004 Machine No.: 250/04 0147 Power consumption: 5.0 kVA Voltage: 400 V Frequency: 50/60 Hz Pre-fuse: max. 16 A Configuration Type: Vibratory finishing machine with round tank Control: integrated control panel with display Execution: Double container system (2x50) Origin: Made in Germany Auction-ID: A1-45711-326

Number of pistons 3 Table dimensions ( x-y/mm) 2210 x 1830 Slide Dimensions X-Y (mm) 2210 x 1830 Stroke (mm) 915 Cushion number 1 Cushion type hydraulic Cushion stroke (mm) 406 Cushion power (ton) 250 Weight ( ton) 100 Machine Conditions ce marked

OMGA TR2A double miter saw: – useful opening 2800mm – adjustable blades D=300mm – total power kw 3.2, volt 380 Machine not CE compliant, for export

Key data: 300 t, 2 mm, 600 mm

Pressure: 300 tons Distance between the uprights 1800mm Side passages: Yes Installation height: 1000mm Table: 1800x1000mm Plunger: 1800x1000mm Stroke: 600mm Weight: 43 tons Height: 4700mm Siemes S7 Controller Ground-level installation Sick Light Barrier Cushion: Stroke 200mm

- Engine 0.37 KW-2850 rpm. - Maximum wheel diameter approx. 200 mm. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-723

2 toilets; 2 sinks; ventilation grille; ventilation unit; light; toilet paper holder holder; lockable; 220v; drainage; forklift slots; crane hooks; 5891 Auction-ID: A1-45773-16

machine 1: Fixed side at the left, working width 220 mm to 2500 mm Workpiece overhang max. 110 mm Electronic width adjustment Panel thickness 8 - 90 mm Top pressure by belts Rolling chain with automatic lubrication, automatic pop-up dogs every 1000 mm Feed speed 10 - 40 m/min Chain infeed taking 1,62 m. panels in front of the dogs Panel alignment at the infeed Middle support NC 30 controlls Equipment left and right: 1+1 Jump universal shaper 6 kW 1+1 Twin hogging unit, motors 6,6 kW (2 motors) 1+1 Universal shaper 6 kW 1+1 Jump universal shaper 6 kW panel turning device HOMAG TD 31/30/13 Year 1989 machine 2: Fixed side at the left, working width 220 mm to 3000 mm Workpiece overhang max. 110 mm Electronic width adjustment Panel thickness 8 - 90 mm Top pressure by belts Rolling chain with automatic lubrication, automatic pop-up dogs every 1000 mm Feed speed 8 - 40 m/min Chain infeed taking ...

4-side squaring and edge banding line Machine 1: Fixed side right, moving side left Rolling chain, feed 10 - 40 m/min Controlls NC 21 Panel thickness 8 - 60 mm Max. panel width 1500 mm Edges: coil 0,3 - 3 mm, strips 0,4 - 20 mm Entry fence for veneered panels Equipment: 1+1 Compact-twin hogger, 2 motors 6,6 kW 1+1 Compact hot melt unit A20 with panel edge pre-heating, glue roller Q34, twin coil magazine, lateral pressure rollers C including anti-stick application 1+1 Free space for solid wood edges up to 2,54 m length 1+1 Rough trimming, 2 x 1,5 kW 1+1 Fine- or radius trimming, 2 x 0,4 kW (edges up to 6 mm) 1+1 Universal shaper 8,1 kW 1+1 Universal shaper 8,1 kW 1+1 Edge sander KS 10 1+1 Disc sander DS 40 1+1 Disc sander DS 40 Angular transfer to the right, TWR 24/30/12/S Panel sizes: width 250 - 1200 mm, length 250 - 3000 mm, thickness 8 - 45 mm Machine 2 Machine II + infeed magazine TW ...

Workpiece sizes: Length 180 - 2500 mm, width 150 - 800 mm, thickness 12 - 40 mm Fixed side at the left, motorised width adjustment of the right side Working height/ transport height: 920 mm Workpiecetransport with belts, infeed belts can lift up Variable feed speed Each side has got 5 glue injectors and 8 dowel inserters (Type 34) Doweldiameter: 8 mm, dowellength 30 mm, dowelprojection 7-14 mm, dowelcenters min. 32 mm, max. 736 mm Each side with dowel hopper feed with shaker and separators Controll mirror Glue pump 1:1 Glue injection controlls type ELC

Working width 180 - 3200 mm, electronic setting Sieb & Meyer Fixed side at the left Chain transport, 80 mm wide Infeed for panels of about 1 m. Top pressure by driven belts Max. workpiece thickness: 80 mm Feedspeed 7 - 35 m/min, motor 2,2 kW Pop-up dogs every 1m10 Equipment left / right: 1 st post Front: 1+1 Jump scorer, motor 1,5 kW, 100 Hz, joined to 1+1 Hogger, motor 3 / 4,4 kW, 50/100 Hz Rear: 1+1 Jump milling, tilting, motor 1,5 kW, 100 Hz 2nd post Front: 1+1 Jump milling, tilting, motor 1,5 kW, 100 Hz Rear: 1+1 Fixed milling, tilting, motor 2,2/3,3 kW, 50/100 Hz 3th post Front: 1+0 Jump milling, tilting, motor 2,2/3,3 kW, 50/100 Hz Rear: 1+1 Jump milling, tilting, motor 1,5 kW, 100 Hz All units with horizontal/vertical adjustment and Siko read-out Outfeed chain approx. 80 cm length Sound and safety enclosures

Pressure total: 250 ton Ram stroke: 70 / 250 mm Slide adjustment: 160 mm Ejector in ram: 20 ton Ejector stroke in ram: 10 mm Shut height (stroke down, adjustment up): 520 mm Free lateral opening F-B: 1.300 mm Table surface area : 1.600 x 1.600 mm Slide area: 1.600 x 1.600 mm Number of strokes: 0 - 50 s.p.m. Required power: 33 kW Height over floor approx.: 5.500 mm Weight of machine approx.: 58 ton Roll feeder Material width: 1250 mm Material thickness: 0,3 - 1,6 mm Control: Siemens S7

Semi-automatic double clipper PolyClip PDC 600, Built in 2002, air hoses and rollers renewed, Dimensions LxWxH approx. 100x80x190cm, weight approx. 85kg, good used condition, fully functional

2-Shaft Mixer; with tilt function; Lining and kneading wings are made of stainless steel, 2-Z-shaped kneading blades; Length 2.90 m, width 1.30 m, height 2.10 m, trough size 64 x 69 x 55 mm Engine type ZG4 KMR 132 S4; Motor power: 7.5 kW; Motor voltage: 380/ 660 V; Rated speed motor: 1435 ... 1480 rpm; Output speed (gearbox): 160 rpm. The plant was shut down in 2024. more photos on request

DEFECTS: There is a noise in the engine, video in the ad Alert on the dashboard: worn brake lining - engine anomaly - engine oil change. The vehicle is driving but we don't know the origin of the noise. Auction-ID: A3-43368-35543

x-travel:14000 mm y-travel:3100 mm z-travel:1.200 mm (220 - 1.420) mm distance between columns:4.417 mm table-size:14.000 x 2.500 mm workpiece weight:15.000 kg/m drive capacity - spindle motor:25 kW spindle cone:63 HSK spindle turning speed range:18000 rpm milling feeds:30000 mm/min dimensions of the machine ca.:15.000 x 8.418 x 6.033 mm weight of the machine ca.:135 t CNC controller: SIEMENS 840 D universal milling head:5 Achsen mit ?C5C? Elektrospindel automatic tool changer:24 fach

faceplate diameter:4000 mm swing diameter:4300 mm turning height:2500 mm max. workpiece weight:63 t total power requirement:125 kW weight of the machine ca.:134 t dimensions:6100x10400x8400 mm Used Vertical Turret Lathe with 2 plungers and CNC Siemens 840 table is hydrostatically. Machine equipped with a grinding head. CNC was overhauled in 2000.

pressure:800 t distance between columns:2900 mm stroke:350 mm Controls:SIEMENS PRESS DESIGN:. - frame design : H-frame :. - Drive type : mechnical :. - openings in uprights : yes :. - number of cushions:0 - opening in table : yes :. - moving bolster : yes :. PRESS FORCES:. - total force (nominal):800 to PRESS TABLE:. - clamping surface (left-right):2800 mm - clamping surface (front-back):2800 mm - rectangular breakthrough (width):2000 mm - rectangular breakthrough (front-back):1800 mm - height above floor level:850 mm RAM:. - clamping surface (left-right):2800 mm - clamping surface (front-back):2800 mm - stroke:350 mm - number of strokes max:55 /min RAM (MECHAN. PRESS):. - ram adjustment:350 mm TOOL ASSEMBLY DIMENSIONS:. - shut height (stroke down, adjustment up):1100 mm - distance between columns (H-frame):2900 mm - Free passage between side columns (width):2560 mm ...

adjustment drive of the grinding spind.slide:0,0025 - 0,05 mm total power requirement:100 kW adjustment of grinding head slide:150 mm weight of the machine ca.:17 t grinding spindle drive:2 x 37 kW grinding width:30-150 mm peripheral speed:34 m/sec workpiece speeds:60 - 300 mm/Sek. grinding height:70 mm grinding wheel diameter:750 mm grinding tools:750 x 75 x 350 mm grinding wheel turning speeds:870 U/Min. max. workpiece diameter:250 mm

grinding height:-- mm grinding width:220 mm grinding wheel diameter:762 mm total power requirement:90 kW weight of the machine ca.:13 t grinding spindle 1 drive::37 kW grinding spindle 2 drive::37 kW Grinding machine for pre-grinding the connecting rod With 2 replacement spindle motors

x-travel:6500/13150 mm y-travel:4000 mm z-travel:1250 mm w-axis:2250 mm table surface area:5500/12150 x 3000 mm max. workpiece weight:70.000/105.000 kg ram head dimension:480 x 510 mm milling spindle motor:63 kW max. torque on the spindle:3300 Nm tool taper:DIN 39871 AD ISO 50 milling head speed:6,3 - 4000 U/min feed speeds:1 - 24000 mm/min w-axis:1 - 6000 mm/min distance between columns:3500 mm passage:3000 mm total power requirement:120 kW weight of the machine ca.:245 t dimensions of the machine ca.:29,0 x 7,7 x 8,1 m Machine is in nearly new condition and was completely modernized in 2020! With CNC SIEMENS 840 D Automatic tool magazine for 153 tool positions Automatic milling head magazine for 6 milling heads Machining module ? straight ? straight long ? Machining module ? angle standard ? 4000 rpm, 144 x 2.5°, ISO 50 Machining module ? narrow angle extended ? 40 kW, 4000 rpm, 1800  ...

pressure:250 t passage width:1280 mm stroke:bis 500 mm total power requirement:47 kW weight of the machine ca.:23 t dimensions of the machine ca.:2200 x 1850 x 4600 mm table surface area:1250 x 1000 mm dayligth:800 mm daylight between the side columns:520 x 750 mm table height above floor:1000 mm Documents: vorhanden

faceplate diameter:4000 mm swing diameter:4300 mm turning height:330 mm faceplate turning speed range:1 - 92 U/min workpiece weight:18 t feeds:1 - 4000 mm/min main drive motor:55 kW total power requirement:85 kVA weight of the machine ca.:64 t dimensions of the machine ca.:90, x 7,2 x 5,5 m with CNC SIEMENS 840 D for 4 axis 2 Vertical Supports tool Basic holder chip conveyor

faceplate diameter:4770 mm swing diameter:7000 mm turning height:1000 mm slide stroke:1000 mm workpiece weight max.:100000 kg faceplate turning speed range:2 - 20 U/min feed speeds:1 - 10000 mm/min rapid traverse:10 m/min ram head dimension:250 x 250 mm main drive:100 kW total power requirement:200 kW with CNC SIEMENS 840 D 2 Vertical Supports with toolchanger 12 pockets C-axis and driven tooling SK 50 37 Kw 3000 rpm Chip conveyor and coolant attachment

faceplate diameter:5000 mm swing diameter:6100 mm turning height:2400 mm ram stroke each side:1490 mm ram head dimension:340 x 340 mm max. workpiece weight:100.000 kg total power requirement:100 kW weight of the machine ca.:155 t faceplate turning speed range:0,4 - 50 U/min with 2 x 2 axes CNC SIEMENS 840 D

x-travel:6500/13150 mm y-travel:4000 mm z-travel:1250 mm w-axis:2250 mm table surface area:5500/12150 x 3000 mm max. workpiece weight:70.000/105.000 kg ram head dimension:480 x 510 mm milling spindle motor:63 kW max. torque on the spindle:3300 Nm tool taper:DIN 39871 AD ISO 50 milling head speed:6,3 - 4000 U/min feed speeds:1 - 24000 mm/min w-axis:1 - 6000 mm/min. distance between columns:3500 mm passage:3000 mm total power requirement:120 kW weight of the machine ca.:245 t dimensions of the machine ca.:29,0 x 7,7 x 8,1 m The machine is in mint condition and was generally overhauled in 2020! with CNC SIEMENS 840 D autom. tool magazine for 153 tool stations autom. milling head magazine for 6 heads milling heads - straight - straight extended length - milling head -angular head standard - 4000 rpm, 144 x 2,5°, ISO 50 milling head -angular small extended length -40 kW, 4000 rpm, 1800 Nm,  ...

pressure:200 t distance between columns:2100 mm stroke:550 mm Distance table/ram, stroke up:1800 mm table surface area:2000 x 2800 mm table height over floor:760 mm ram surface:2000 x 2000 mm Side window:2000 mm feed down:400 mm/s power requirement:51,0 kW weight:33,0 t dimensions (WxDxH):3,25 x 3,5 x 5,4 m Height above floor:5,4 m foundation pit:not necessary