138,049 used machines on RESALE, but how to find them? Machine Search
Technical data Manufacturer: KONE Type: Double Girder Overhead Crane (Crane 76) Capacity: 2 × 32 t / 2.5 t Wingspan: 45 m Inventory No.: 0602-72-76 Configuration 2 hoists, 32 t each Auxiliary hoist, 2.5 t Auction-ID: A7-50461-73
Technical data Manufacturer: KONE Type: Double girder overhead travelling crane (crane 077) Serial number: 0602.72.77 Max. load capacity: 2 × 5 t Wingspan: approx. 8 m Configuration 2 electric cables Hallway service Auction-ID: A7-50461-67
Technical data Manufacturer: DEMAG Type: Double-girder overhead crane (crane 36) Year of Make: 1989 Serial Number: 16764 Wingspan: 23 m Inventory No.: 0601-72-36 Configuration Main trolley, load capacity 50,000 kg Permanently mounted drum crossbar, width 7,500 mm Bearing Supports Secondary linkage, lifting capacity 25 t 2 auxiliary hoists, load capacity 7.5 t each Auction-ID: A7-50461-34
Equipped with 2 vertical jacks; single-sided rear unloading; control box; weighing device; ring towbar; Auction-ID: A1-47391-110
Technical data Manufacturer: KONE Type: Double Girder Overhead Crane (Crane 74) Lifting capacity: 40/8 t Wingspan: 16 m Inventory No.: 0602-72-74 Configuration Double hoist Tambour Traverse Auxiliary hoist, Fabr. KONE, load capacity 8,000 kg Remarks Real estate installation. Auction-ID: A7-50461-15
2 x 5.5 kW motors 2 x DIL 415-19/5,5-S1 Pumps Auction-ID: A1-50490-5
Technical data Load capacity: 2 × 20,000 kg Wingspan: 17,500 mm Configuration Double hoist Hook crossbar, width 7,500 mm Trolley, load capacity 10,000 kg Trolley, load capacity 5,000 kg Remote control Remarks Inventory No.: 0601-72-39 Auction-ID: A7-50461-31
Technical data Manufacturer: ERNST KRÖGER Type: Double Girder Overhead Crane (Crane 39) Year of Make: 1969 Serial number: 11212 Load capacity: 2 × 20,000 kg Wingspan: 17,500 mm Inventory No.: 0601-72-39 Configuration Double hoist Hook crossbar, width 7,500 mm Trolley, load capacity 10,000 kg Trolley, load capacity 5,000 kg Remote control Auction-ID: A7-50461-36
Key data: 400 t
The following machines are involved: Müller-Weingarten ZE 400-16.19, 400 t double column press, approx. 1,600 × 1,300 × 1,400 mm, year of construction 1963, conversion 1991. Müller-Weingarten ZE 400-20.13.2, 400 t double column press, approx. 2,000 × 1,300 × 1,200 mm, year of construction 1977, conversion 1991.
Operation: Double-acting, Piston diameter: 63 mm, Stroke: 1050 mm, Damping: PPV (Pneumatic damping adjustable on both sides), Position detection: For proximity switch (A), Operating pressure: 0.6 ... 12 bar Auction-ID: A1-50529-632
1 pc. universal whetstone (20mm wide) 1 pc. grindstone for HSS steel (40mm wide) Grinding wheel diameter 150 mm Grinding wheel width 20 + 40 mm Mounting diameter 12.7 mm Connection voltage 230 V Motor power 0.25 KW Weight 16 kg Dimensions L x W x H 0.37 x 0.2 x 0.24 m Condition: never used / new (5) Auction-ID: A7-50523-784
Double bench grinder: Grinding wheel grit: 36 and 80 Grinding wheel diameter max. 200 mm Grinding wheel width 32 mm Pick-up diameter 30 mm Connection voltage 230 V Motor power 0.9 KW Condition: never used / new (5) Auction-ID: A7-50523-929
How it works: Double-acting, Piston diameter: 40 mm, Stroke: 200 mm, Damping: PPV (Pneumatic damping adjustable on both sides), Position detection: For proximity switch (A), Operating pressure: 0.6 ... 12 bar Auction-ID: A1-50529-627
-6 dual ports -Horse decoration -Black lacquered -Includes hinges -New Auction-ID: A1-49954-52
Auction-ID: A1-50529-630
Auction-ID: A1-50529-631
How it works: Double-acting, Piston diameter: 80 mm, Stroke: 800 mm, Position detection: For proximity switch (A), Operating pressure: 0.6 ... 12 bar Auction-ID: A1-50529-633
-6 dual ports -Cow decoration -Black lacquered -Includes hinges -New Auction-ID: A1-49954-53
How it works: Double-acting, Piston diameter: 40 mm, Stroke: 320 mm, Damping: PPV (Pneumatic damping adjustable on both sides), Position detection: For proximity switch (A), Operating pressure: 0.6 ... 12 bar Auction-ID: A1-50529-628
Double bench grinder: Grinding wheel grit: 36 and 80 Grinding wheel diameter max. 150 mm Grinding wheel width 25 mm Pick-up diameter 32 mm Connection voltage 230 V Motor power 0.5 KW Condition: never used / new (5) Auction-ID: A7-50523-789
How it works: Double-acting, Piston diameter: 40 mm, Stroke: 200 mm, Damping: PPV (Pneumatic damping adjustable on both sides), Position detection: For proximity switch (A), Operating pressure: 0.6 ... 12 bar Auction-ID: A1-50529-623
How it works: Double-acting, Piston diameter: 40 mm, Stroke: 320 mm, Damping: PPV (Pneumatic damping adjustable on both sides), Position detection: For proximity switch (A), Operating pressure: 0.6 ... 12 bar Auction-ID: A1-50529-621
How it works: Double-acting, piston diameter: 63 mm, stroke: 550 mm, operating pressure max.: 10 bar Auction-ID: A1-50529-626
How it works: Double-acting, piston diameter: 63 mm, stroke: 320 mm, operating pressure: 0.6 ... 10 bar Auction-ID: A1-50529-624
Grinding wheel diameter max. 300 mm Speed 1390 rpm Connection voltage 400 V Motor power 2.2 KW Condition: untested Auction-ID: A7-50523-739
Souffleuse éléctrique PLASTIBLOW type PB1E/D E60/25 Année : 2007 Diamètre vis extrudeuse : 60mm Rapport L/D vis : 25 Moules : 2 Course : 260 mm Force de fermeture : 35 T Capacité : 3L Puissance moteur extrudeuse : 30 KW Puissance chauffage extrudeuse : 9,6 KW Zones de chauffes : 4 Ventilateurs de refroidissement : 3 Capacité de plastification en PE : 58kg/h Capacité de plastification en BFPE : 75kg/h Heures de fonctionnement : 24 000 heures Double poste Double tete avec entraxe de 100mm. Tête modifiée par rapport à original en 2021 (3 têtes entraxe 85mm => 2 têtes entraxe 100)
Carnitech double shaft vacuum paddle mixer, type: CT3027.01, number: 11-0037, year of construction: 2011, 400 V, 3 Ph, 50 Hz, 41.5 A, volume: 2200 liter, machine weight: 3750 kg, dimensions: 3021 mm x 2187 mm x 3200 mm. Including s/s platform, 4 steps, working height: 1050 mm, total dimensions: 1680 mm x 920 mm x 2130 mm.
Rheon encrusting machine, type: Double lane cornucopia, model: WN055, serial number: 172, year of construction: 10/2008, 380 V, 11.3 A, 4.3 kW, plastic belt width: (2x) 130 mm, clearance: 440 mm x 75 mm, total dimensions: 1800 mm x 1050 mm x 2240 mm. With Rheon dusting flour covering device, plastic belt, belt width:(2x) 100 mm, clearance: (2x) 70 mm x 40 mm, total dimensions: 1650 mm x 900 mm x 1750 mm. Incomplete, missing screw.
N&N Nadratowski sp.j. double shaft paddle mixer with lifter for pallet boxes, lifter type: PW-2/1000 column loader, serial number: 1661, year of construction: 2019, 400 V, 50 Hz, 2.2 kW, weight: 1150 kg, capacity: 1000 kg, lifting height: 2400 mm, total dimensions: 2200 mm x 1500 mm x 2250 mm. Mixer type: MIX-1500F, serial number: 709, year of construction: 2011, 400 V, 50 Hz, 15 kW, weight: 1950 kg, capacity: 1500 litre, dimensions: 2650 mm x 1500 mm x 2250 mm.
Stephan double jacketed vacuum rated processing mixer/cutter with steam injection, type: TC/SK 300, machine number: 71317601, year of construction: 1986, 380 V, 3 Ph, 50 Hz, 32/45 kW, steam heated, heating capacity: 95°C, scraper agitator, vacuum system, hydraulic system, total dimensions: 2080 mm x 1630 mm x 2650 mm. Including s/s switch cabinet, year 2005, Siemens S7-300 Simatic PLC, Siemens TP177B Panel, dimensions switch cabinet: 2080 mm x 550 mm x 2170 mm and s/s platform, working height: 1830 mm, total dimensions working platform: 2460 mm x 820 mm x 2850 mm.
Stephan double jacketed universal process machine with steam injection, type: UMM/SK80E, machine number: 23409, year of construction: 1974 (overhauled by Milking in 2011 including new control panel, Siemens S7-300 Simatic PLC, Siemens OP177B), 380 V, 3 Ph, 36/32 A, 18.5/15 kW, volume: 80 liter, heating capacity: 95°C, scraper agitator, pneumatic outlet valve, total dimensions: 2130 mm x 1400 mm x 1900 mm.
Élmüker-Vincze Ltd. twin double jacketed process machine with steam injection, type: VK-2x 25 Vákuumkutter, number: 5-2012, year of construction: 12-2012, maximum steam pressure: 2.5 bar, heating capacity: 95°C, volume: 2x 25 liter, 2x scraper agitators, 2x Indag product lobe pumps, total dimensions: 2900 mm x 940 mm x 2180 mm.
The EPC 9/2 from HEKA Elektronik is a two-channel patch clamp amplifier that enables precise measurements in the voltage clamp and current clamp. The device is known for its exceptional signal quality, low noise levels and stable performance – even during long test series. This model is particularly suitable for applications where simultaneous measurements on two cells or two independent membrane patches are required. --- Technical Highlights & Features: • Two independent channels (Double Patch Clamp) - Each channel with its own inputs for: - Probe (patch electrode) - Test input - External stimulus - Voltage and current monitor - Dual filter units Untested from Laboratory Closure Auction-ID: A1-50540-15
Key data: 27 mm, 36 , 1200 U/min
Warehouse – No. 2875 1 used, in 2026 Partially overhauled and function-tested compounding granulation line, consisting of: Brabender grav. Dosage 2-components (expandable, optional vs. surcharge) with 1x FlexWall 40, 1x DDW-MD5, Congrav RC4 control stand-alone Extruder Twin Screw Leistritz Type ZSE 27 HP Synchronous, seal-combing, segmental screw and barrel with intensive cooling. Screws 2x Ø 27 mm- 36 L/D with 8 cylinder zones with 3x degassing zones, 1x vacuum pump 1.5 kW Screw speed up to 1,200 rpm.-1 – adjustable Extruder drive 33.8 kW - Heating capacity 9.8 kW installed Mass pressure sensor Control Macromatex III MAAG Gala Underwater Pelletizer Type LPU Model SLC 5, incl. Polymer start-up valve with hydraulics Perforated plate 20°, granulator SLC 5 with drive 1.5 kW Water Box - Temperate water system with Granule Centrifugal Dryer Type 1150, Driv ...
Unused fence galvanized height 183cm, length 250cm. Wire rod thickness 8mmx6mmx8mm extra heavy. Total weight of the package approx. 850kg Auction-ID: A1-50277-38
Unused fence galvanized height 183 length 250cm. wire rod thickness 6/5/6mm Auction-ID: A1-50277-40
150 running metres, 6/5/6 mm thickness, height 2.03 m Double bar mat fence complete set including posts and Clamp plate fastening material Fence elements: 2030 mm height and 2,500 mm length Post for concreting: 2600 mm Number of fence elements: 60 pieces Number of posts: 61 pieces Gross vehicle weight: 1968 kg Double rod mats material: Galvanized according to DIN EN 10244-2 and RAL 7016 powder-coated according to 10245-4 Fence tips: 30mm Mesh size: 50mm x 200mm Mat width: 2510mm Fence post material: Hot-dip galvanized according to DIN EN 10244-2 and RAL 7016 powder-coated according to EN10245-4 Post cap material: plastic Material accessories: stainless steel Post profile: 60 x 40 x 1.5mm Pre-assembled fastening attachments made of plastic incl. rivet nuts, clamping plates made of stainless steel, fence screws M8 x 40 stainless steel, Post caps without protrusion Location ...
62.5 m, 8/6/8 mm, height 1.83 m Double bar mat fence complete set including post and fastening material retaining plates Fence elements: 1830 mm high and 2,500 mm long Posts for concreting: 2400 mm Number of fence elements: 25 pieces Number of posts: 26 pieces Double rod mats Material (RAL) Galvanized according to DIN EN 10244-2 and powder-coated Fence Spikes 30mm Mesh size 50mm x 200mm Mat width 2510mm Fence post with clamp Material: Hot-dip galvanized, powder-coated according to DIN EN ISO 1461 and RAL 7016 Material: Post cap: Plastic Material Accessories Stainless Steel Post profile (mm) 60 x 40 x 2 Fence fastening Stainless steel rivet nuts already integrated into the post Screws for Clamps Stainless Steel Screws M8 Accessories (included) Pre-assembled plastic fastening attachments incl. rivet nuts, aluminium clamping tabs, fence screws M8 x 40, post caps ...
75 running metres, 6/5/6 mm, height 1.43 m Double bar mat fence complete set including post and fastening material retaining plates Fence elements: 1430 mm high and 2,500 mm long Posts for concreting: 2000 mm Number of fence elements: 30 pieces Number of posts: 31 pieces Double rod mats Material (RAL) Galvanized according to DIN EN 10244-2 and powder-coated Fence Spikes 30mm Mesh size 50mm x 200mm Mat width 2510mm Fence post with clamp Material: Hot-dip galvanized, powder-coated according to DIN EN ISO 1461 and RAL 7016 Material: Post cap: Plastic Material Accessories Stainless Steel Post profile (mm) 60 x 40 x 2 Fence fastening Stainless steel rivet nuts already integrated into the post Screws for Clamps Stainless Steel Screws M8 Accessories (included) Pre-assembled plastic fastening attachments incl. rivet nuts, aluminium clamping tabs, fence screws M8 x 40, ...
62.5 running metres, 8/6/8 mm, height 2.03 m Double bar mat fence complete set including post and fastening material retaining plates Fence elements: 2,030 mm high and 2,500 mm long Posts for concreting: 2,600 mm Number of fence elements: 25 pieces Number of posts: 26 pieces Double rod mats Material (RAL) Galvanized according to DIN EN 10244-2 and powder-coated Fence Spikes 30mm Mesh size 50mm x 200mm Mat width 2510mm Fence post with clamp Material: Hot-dip galvanized, powder-coated according to DIN EN ISO 1461 and RAL 7016 Material: Post cap: Plastic Material Accessories Stainless Steel Post profile (mm) 60 x 40 x 2 Fence fastening Stainless steel rivet nuts already integrated into the post Screws for Clamps Stainless Steel Screws M8 Accessories (included) Pre-assembled plastic fastening attachments incl. rivet nuts, aluminium clamping tabs, fence screws M8 x ...
75 running metres, 6/5/6 mm Height: 0.83 m Double bar mat fence complete set including post and fastening material retaining plates Fence elements: 830 mm high and 2,500 mm long Posts for concreting: 1400 mm Number of fence elements: 30 pieces Number of posts: 31 pieces Double rod mats Material (RAL) Galvanized according to DIN EN 10244-2 and powder-coated Fence Spikes 30mm Mesh size 50mm x 200mm Mat width 2510mm Fence post with clamp Material: Hot-dip galvanized, powder-coated according to DIN EN ISO 1461 and RAL 7016 Material: Post cap: Plastic Material Accessories Stainless Steel Post profile (mm) 60 x 40 x 2 Fence fastening Stainless steel rivet nuts already integrated into the post Screws for Clamps Stainless Steel Screws M8 Accessories (included) Pre-assembled plastic fastening attachments incl. rivet nuts, aluminium clamping tabs, fence screws M8 x 40, ...
250 running metres, 8/6/8 mm thickness, height 2.03 m Double bar mat fence complete set including posts and Clamp plate fastening material Fence elements: 2030 mm height and 2,500 mm length Post for concreting: 2600 mm Number of fence elements: 100 pieces Number of posts: 101 pieces Total weight: 4800 kg Double rod mats material: Galvanized according to DIN EN 10244-2 and RAL 7016 powder-coated according to 10245-4 Fence tips: 30mm Mesh size: 50mm x 200mm Mat width: 2510mm Fence post material: Hot-dip galvanized according to DIN EN 10244-2 and RAL 7016 powder-coated according to EN10245-4 Post cap material: plastic Material accessories: stainless steel Post profile: 60 x 40 x 1.5mm Pre-assembled fastening attachments made of plastic incl. rivet nuts, clamping plates made of stainless steel, fence screws M8 x 40 stainless steel, Post caps without protrusion Location: Ind ...
75 running metres, 6/5/6 mm, height 1.63 m Double bar mat fence complete set including post and fastening material retaining plates Fence elements: 1630 mm high and 2,500 mm long Posts for concreting: 2200 mm Number of fence elements: 30 pieces Number of posts: 31 pieces Double rod mats Material (RAL) Galvanized according to DIN EN 10244-2 and powder-coated Fence Spikes 30mm Mesh size 50mm x 200mm Mat width 2510mm Fence post with clamp Material: Hot-dip galvanized, powder-coated according to DIN EN ISO 1461 and RAL 7016 Material: Post cap: Plastic Material Accessories Stainless Steel Post profile (mm) 60 x 40 x 2 Fence fastening Stainless steel rivet nuts already integrated into the post Screws for Clamps Stainless Steel Screws M8 Accessories (included) Pre-assembled plastic fastening attachments incl. rivet nuts, aluminium clamping tabs, fence screws M8 x 40, ...
Double swing gate complete set (height: 2,000 mm) Details: Description: Double bar mat fence gate complete set (height: 1,800 mm) Details: 2 m x 3 m, complete set including post and handle set/fastening material Colour: Anthracite (RAL 7016) Gate: Frame 60/40 (2,000 mm high and 3,000 mm wide) Posts for concreting: 2,400 mm (80/80) Door panel: 6/5/6 Mesh size: 50mm x 200mm Number of doors: 2 Number of posts: 2 Location: 32602 Vlotho Auction-ID: A1-50589-69
Unused fence galvanized height 183cm, length 250cm. Wire rod thickness 8mmx6mmx8mm extra heavy. Total weight of the package approx. 850kg Auction-ID: A1-50277-56
Unused fencing galvanized various heights 223cm and smaller material galvanized and powder coated Auction-ID: A1-50277-36
75 running metres, 6/5/6 mm, height 1.83 m Double bar mat fence complete set including post and fastening material retaining plates Fence elements: 1830 mm high and 2,500 mm long Posts for concreting: 2400 mm Number of fence elements: 30 pieces Number of posts: 31 pieces Double rod mats Material (RAL) Galvanized according to DIN EN 10244-2 and powder-coated Fence Spikes 30mm Mesh size 50mm x 200mm Mat width 2510mm Fence post with clamp Material: Hot-dip galvanized, powder-coated according to DIN EN ISO 1461 and RAL 7016 Material: Post cap: Plastic Material Accessories Stainless Steel Post profile (mm) 60 x 40 x 2 Fence fastening Stainless steel rivet nuts already integrated into the post Screws for Clamps Stainless Steel Screws M8 Accessories (included) Pre-assembled plastic fastening attachments incl. rivet nuts, aluminium clamping tabs, fence screws M8 x 40, ...
125 running metres, 8/6/8 mm thickness, height 2.03 m Double bar mat fence complete set including posts and Clamp plate fastening material Fence elements: 2030 mm height and 2,500 mm length Post for concreting: 2600 mm Number of fence elements: 50 pieces Number of posts: 51 pieces Total weight: 2400 kg Double rod mats material: Galvanized according to DIN EN 10244-2 and RAL 7016 powder-coated according to 10245-4 Fence tips: 30mm Mesh size: 50mm x 200mm Mat width: 2510mm Fence post material: Hot-dip galvanized according to DIN EN 10244-2 and RAL 7016 powder-coated according to EN10245-4 Post cap material: plastic Material accessories: stainless steel Post profile: 60 x 40 x 1.5mm Pre-assembled fastening attachments made of plastic incl. rivet nuts, clamping plates made of stainless steel, fence screws M8 x 40 stainless steel, Post caps without protrusion Location: Indust ...
maximum number of results exceeded
please refine your search
1 € 
