double cross cut used for sale

pressure: 500 t distance between columns: 1220 mm max. ram stroke: 600 mm distance table/ram, max. stroke up, adjustment up: 1000 mm table surface area: 1600 x 1200 mm die-cushion pressure inside the table: 320 t stroke of drawing cushion in table: 150 mm drawing cushion surface in table: 750 x 812 mm die-cushion pressure in pusher: 180 t stroke of drawing cushion in pusher: 100 mm drawing cushion surface in pusher: 750 x 625 mm ram surface: 1600 x 1200 mm table height over floor: 800 mm feed down: 665 mm/sec feed up: 530 mm/sec working feed: 34 - 100 mm/sec quantity of oil: 2000 l power capacity: 180 kW weight: 40 t dimensions of the machine ca.: 3,2 x 2,4 x 7,5 m by using oil-hydraulic drive, hydraulic and electric control UVV, die cushion in bed and slide, adjustable drawing speed, punching limit with damping plunger lock, electric cabinet Our list price is WITHOUT starting the machin ...

max. dia. of grinding wheel: 200 mm : 40 mm turning speeds: 1400/2800 U/min voltage: 380 V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

rotary table dia.: mm max. dia. of grinding wheel: mm with manual ongoing: 0 manually feed: 0 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 t distance between columns: 680 mm stroke: 150 mm total power requirement: 15 kW weight of the machine ca.: 7 t dimensions of the machine ca.: 3 x 3 x 3 m No. 0214 ydraulic high-speed double-column press SMG DS 63 Clearance between the uprights 680 mm, max. distance between table top and ram 385 mm, Ejector force 15kN, largest ram stroke 150 mm. Working area: Table surface 660 x 460 Drive: 15 kW pressing force 630 kN, retraction force 51 kN The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 132500 € : 2504.25 € : 200 to : 500 mm : 1250x1000 mm : 600 mm : 25 mm/s : 3,5 mm/s : 7.5 kW : 1550 mm : 1300 mm : 2700 mm 4-pillar guide ram guide round table and ram with T-slots 2 hand operation Siemens PLC manometer users manual OPTIONS: Light barrier € on Request Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Decompression valve € on Request Oil cooler with decompreission valve € on Request Pressur switch € on Request The data for this ad was created with ...

: neu : ca. 2 - 4 Wochen ab Auftr : 4533.22 € : 300 x 40 x 51 mm : 2,2 kW : 1250 1/min : 42 mm : 540 mm : 530 mm : 1180 mm : 800 x 600 x 1400 mm : 90 kg With machine stand, integrated suction, emergency stop pushbutton and brake (Art.317.779) Quiet running, maintenance-free motor Laterally closed protective hoods Stable, adjustable workpiece supports High safety comfort due to adjustable spark deflectors Suitable for grinding, deburring and sharpening all kinds of tools, metal profiles, etc. Motor circuit breaker and undervoltage release Spark/eye protection on both sides Connection cable with CEE plug 16 A 1 grinding wheel each coarse and fine ALTERNATIVE: Version without suction (Art. 317.776) Version without stand, suction and brake/emergancy push button (Art. 317.764) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 - 4 Wochen ab Auftr : Deutschland : 956.67 € : 200 x 32 x 32 mm : 1 kW : 2800 1/min : 42 mm : 250 mm : 470 mm : 230 mm : 325 x 540 x 310 mm Quiet running, maintenance-free motor Laterally closed protective hoods Stable, adjustable workpiece supports High safety comfort due to adjustable spark deflectors Suitable for grinding, deburring and sharpening all kinds of tools, metal profiles, etc. Motor circuit breaker and undervoltage release Spark/eye protection on both sides Connection cable with CEE plug 16 A 1 grinding wheel each coarse and fine 12 months warranty for single shift operation Art.Nr.: 317.762 table version ALTERNATIVE VERSIONS: Art.Nr.: 317.774with machine stand, emergency stop buttom and brake Art.Nr.: 317.777 with MA400D integrated extractor, machine stand, emergency stop buttom and brake The data for this ad was created with ModulMWS - the software soluti ...

: neu : ca. 2 - 4 Wochen ab Auftr : Deutschland : 1896.69 € : 200 x 32 x 32 mm : 1 kW : 2550 1/min : 42 mm : 270 mm : 470 mm : 1050 mm : 600x800x1350 mm : 60 kg Quiet running, maintenance-free motor Laterally closed protective hoods Stable, adjustable workpiece supports High safety comfort due to adjustable spark deflectors Suitable for grinding, deburring and sharpening all kinds of tools, metal profiles, etc. Motor circuit breaker and undervoltage release Spark/eye protection on both sides Connection cable with CEE plug 16 A 1 grinding wheel each coarse and fine 12 months warranty for single shift operation Art.Nr.: 317.774with machine stand, emergency stop pushbutton and brake OPTION (price on request): Footpedal as emergency stop ALTERNATIV MODELS: Art.Nr.: 317.762 table version Art.Nr.: 317.777 with machine stand with integrated suction, emergency stop pushbutton and brake The da ...

: neu : ca. 4 Monate ab Auftragse : Italien : 123000 € : 2324.7 € : 170 to : 500 mm : 1200x700 mm : 600 mm : 110 mm/s : 7 mm/s : 70 mm/s : 19 kW : 2700 mm : 1600 mm : 2650 mm 4-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2025 : 050141 : prompt, Zwischenverkauf v : Polen : 2821.24 € : 1 : 200 x 32 x 32 mm : 1 kW : 2800 1/min : 42 mm : 470 mm : 250 mm : 1050 mm : 60 kg Quiet running, maintenance-free motor Laterally closed protective hoods Stable, adjustable workpiece supports High safety comfort due to adjustable spark deflectors Suitable for grinding, deburring and sharpening all kinds of tools, metal profiles, etc. Motor circuit breaker and undervoltage release Spark/eye protection on both sides Connection cable with CEE plug 16 A 1 grinding wheel each coarse and fine ALTERNATIVES: Version without suction (Art. 317.762) Version without stand, suction and brake/emergancy push button (Art. 317.774) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

IFANGER F 300 ist eine Bandschleifmaschine mit einseitiger Schleifscheibe, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Bearbeitungsdaten: Schleifscheibe Ø 300 mm, Breite 25 mm, Bohrung 25 mm. Technische Hauptdaten: 2 Drehzahlstufen von 1650 bis 2160 t/min; Anschluss 50 Hz, 3x 380 V; Leistung 0,73 kW; Maschinengewicht ca. 170 kg; Abmessungen L600 × B600 × H1300 mm. Keine speziellen Zusatzausrüstungen angegeben. Eignet sich zur Erzielung enger Toleranzen; typische Einsatzbereiche sind Automotive, Uhrmacherei, Werkzeugmaschinenbau, Luftfahrt und Medizintechnik Technische Daten ohne Gewähr

MURATEC MT 100 ist eine CNC-Doppelspindel-Drehmaschine, ausgelegt für hochpräzise Bearbeitung, hohe Genauigkeit und Zuverlässigkeit. Kapazitäten: Drehdurchmesser 190 mm, Stangendurchmesser Ø51 mm, 2 Spindeln, 2 Revolver mit je 15 Positionen, angetriebene Werkzeuge 6000 rpm. Achsen: X 150 mm, Y ±30 mm, Z 620 mm. Technische Daten: Spindeldrehzahl 0–6000 rpm (stufenlos), Gegenspindel 6000 rpm, Weg 680 mm, Spindelmotor 11/7,5 kW, Eilgang X24 Z40 Y12 m/min, Anschluss 3x400 V 50 Hz, Gewicht ~8000 kg, Abmessungen 4120×2130×2815 mm. Zubehör: Spannzangensatz HAINBUCH SK52BZIG, Ölnebelabsaugung FILTERMIST FX4002, LNS Lademagazin ALPHA SL65 S. Erreicht enge Toleranzen; geeignet für Automotive, Luftfahrt, Medizintechnik und Präzisionskomponenten. Technische Daten ohne Gewähr

VITAX Meuleuse Nr. 38 ist eine Doppelschleifmaschine, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit bei Doppel-Schleifprozessen. Angaben zu Arbeitskapazitäten (Durchmesser, Längen, Verfahrwege, Werkstückmaße) liegen nicht vor. Technische Details (Spindeldrehzahlen, Vorschübe, Stromversorgung, Abmessungen, Gewicht) sind nicht angegeben. Sie ermöglicht enge Toleranzen und eignet sich für Branchen wie Automotive, Luftfahrt, Uhrmacherei, Medizintechnik und Werkzeugmaschinenbau. Technische Daten ohne Gewähr

MURATEC MT 100 is a CNC Doppelspindel Drehmaschine, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Kapazitäten: Schwingdurchmesser 190 mm, Stangendurchmesser max. 51 mm; 2 Spindeln; 2 Revolver mit je 15 Positionen. Verfahrwege X 150 mm, Y ±30 mm, Z 620 mm; Gegenspindelhub 680 mm. Technische Daten: Stufenlos 0–6000 rpm Hauptspindel, Gegenspindel max 6000 rpm; angetriebene Werkzeuge bis 6000 rpm (2,2 kW); Spindelmotor 11/7,5 kW; Eilgang X 24 / Z 40 / Y 12 m/min; Anschluss 3x400 V 50 Hz; Gewicht ~8000 kg; Abmessungen 4120×2130×2815 mm. Zubehör: IEMCA BOSS 552 Lademagazin, Kühleinrichtung, Spannzangensatz, Werkzeughaltersatz, Späneförderer, elektronisches Handrad, C-Achse. Ermöglicht enge Toleranzen; ideal für Automotive, Luftfahrt, Medizintechnik, Uhren- und Maschinenbau Technische Daten ohne Gewähr

: neu : ca. 4 Monate ab Auftragse : Italien : 103500 € : 1956.15 € : 150 to : 500 mm : 1250x1000 mm : 600 mm : 23 mm/s : 4 mm/s : 5.5 kW : 1520 mm : 1270 mm : 2500 mm 4-pillar guide ram guide round table and ram with T-slots 2 hand operation Siemens PLC manometer users manual Light barrier € on Request Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Decompression valve € on Request Oil cooler with decompreission valve € on Request Pressur switch € on Request The data for this ad was created with ModulMWS - ...

Double Z, screw mixer Laboratory Mixing Machines for approx. 60l usable capacity Stainless steel boilers and mixers 1 speed, Boiler tilt function for emptying with lockable lid

Metal band saw, fully automatic, band saw machine, band saw, vertical band saw, horizontal band saw, hydraulic horizontal band saw machine, automatic band saw, automatic metal band saw -Manufacturer: Berg & Schmidt, double miter band saw with roller conveyor left/right -Type: GBS 250 Super AutoCut 2-stage -Drive: 1.7 kW -Miter cuts: 60° left and 45° right -Cutting capacity 90°: Round 255mm, Square 230mm, Rectangle 300x180mm -Cutting capacity 45° left: Round 210mm, Square 190mm, Rectangle 200x160mm -Cutting capacity 60° left: Round 135mm, Square 110mm, Rectangle 130x100mm -Cutting capacity 45° right: Round 180mm, Square 176mm, Rectangle 180x100mm -Saw band speed: 37/74 m/min -Band saw: 2765 x 27 x 0.9 mm -Coolant system: CoolmaticPlus micro-spray system -Quick-release clamping device: adjustable in T-slot for quick position changes -Roller conveyor: 2370/360/H960 mm / 3120/325/H960 ...

Second-hand, double-sided, freestanding cantilever racking designed for the storage and organised retrieval of long goods and materials. The structure is suitable for professional use in warehouses and industrial premises. Technical data: Length: ~ 6,000 mm Arm: 650 mm Height: 3,000 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany

Automatic sub-u. Upper feeder Top rolled rivet, shank diameter bottom record cap 10 mm The rivet length is variably adjustable With cross-light target facility Safety trigger The machine is in very good condition, as the machine was only used for a short time

Murzan PI-50 Double diaphragm pump two in stock, ideal for handling suspended solids or shear sensitive products with no damage, easy to clean in place, applications juice, drinks, tomato paste, ketchup, yogurt, cottage cheese, eggs and more, 3 inch inlet and outlet, download PDF for full spec

Key data: 170 mm

Twin-screw extruder Make : COPERION ( Werner & Pfleiderer ) Gearbox make : P.I.V Type : ZSK 170 W 1920/1750 Year of construction : 2021 / 2002 / 1986 Screw diameter : 172 mm Screw speed : 4,9 - 49 min-1 Max. torque : 17,500 Nm Main engine : 216 kW Since 2021 a total of over €420,000 has been invested in new components and factory overhauls (some of which were previously unused) The extruder was in use until Aug / 2023 and has already been dismantled ready for transport. The components are partly redundant and date from the years 1986 - 2021. The scope of delivery consists of : Twin screw degassing Coperion DSE 180 - Year of manufacture 2021 ( 180 t€ ) Main gearbox P.I.V - 1 x year of manufacture 2002, factory overhauled ( 233 t€ ) in 2021, unused - 1 x year of manufacture 1986, factory overhauled in 2016, used 2021 - 2023 Main engines Siemens, ...

pressure: 315 t stroke: 20-150 mm ram stroke - adjustable min/max: 20 - 150 mm table-size: 1780 x 1250 mm ram surface: 1500 x 1000 mm total power requirement: 75 kW weight of the machine ca.: 46 t - Installation height with max. stroke at bottom adjustment at top 500 mm - Passageway in the table : 1200 x 300 mm - Milling in the table : 1300 x 400 x 80 mm - Infinitely variable stroke rate : 20 120 Hübe min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Dual-stream mill for fine wood chip production with segmented internal grinding elements. - Main motor power 315 KW. - Equipped with PALLMANN CLEANOMAT system (installed according to documentation in 2009). - Stripper. - The upper feed hopper with vibratory system and the magnet are NOT included (marked with a cross in photograph no. 4). - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-49881-14

- Includes 2 parallel mounted crimping lines. - Length of the boards from 2440 mm to 2850 mm. - Width of the boards from 1830 mm to 2100 mm. - Thickness of the boards from 3 mm to 40 mm. - Each line consists of: • Automatic panel loading system. • Paper positioning system. • SIEMPELKAMP press: plate dimensions 2950 x 2200 x 150 mm, maximum opening 270 mm, total pressing force 23940 KN, maximum working pressure 320 Bars, working temperature 220° C, heating of the plates with thermal oil, maximum performance 150 pressing/hour. • Edge cleaning unit. • Tilting cooling table. • Intermediate conveyors. • Artificial vision system. - Automatic strapping machine BIELE and final magazine (common to the 2 lines). - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of th ...

AEG Double Grinding and Polishing Machine – Type DP 300/2200 -Operating voltage: 380 V -Motor power: 2.2 kW -Max. disc diameter: Ø 300 mm -Max. pane width: 50 mm -Polishing spindle speed: 1,400 rpm Dimensions: LxWxH 1.2x0.4x0.9 meters / Weight 180Kg

Double bench grinder original GREIF incl. stand Speed (min.): 3,000 rpm Grinding wheel diameter: 200 mm incl. CEE plug Power: 0.55 kW

Double bench grinder original GREIF incl. stand incl. CEE plug Power: 0.55 kW Speed: 3,000 1/min Grinding wheel diameter: 200 mm

wheel diameter: 300 mm grinding wheel width: 50 mm no. of working stations: 2 Stück turning speed range - stepless: 1.450 / 2.900 U/min voltage: 400 V total power requirement: 1,6 / 22 kW weight of the machine ca.: 130 kg dimensions of the machine ca.: 1,10 x 0,50 x 1,30 m ! ATTENTION ! EXCELLENT CONDITION ! This machine comes from a vocational school! - Serial No.: 090520004 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

TECHNICAL SPECIFICATIONS Manufacturer: Kleemann / Bivitec Description: mobile expansion shaft screening plant Type: Mobiscreen MS 21 Z Year of Make: 2019 Throughput: up to 500 t/h Number of screen fractions: 3 pcs. Max. feed grain size: 500 mm Operating hours: approx. 2,100 Screen concept: Coarse piece screen (upper deck) + Expansion shaft screen (lower deck) Screen box: KRL/EDS-DF 1600x5,66-DL Screen cover upper deck: 50 mm sqm plastic Strainer cover lower deck: 4 mm rubber Number of discharge belts: 3 pcs. Chassis: Crawler undercarriage D 4, speed 1.14 km/h Antiebs concept: Diesel-hydraulic Engine: CAT diesel engine type C7.1 with exhaust gas turbocharger Power: 165 kW at 2200 rpm, water-cooled Fuel tank: capacity approx. 485 Ltr. Hydraulic oil tank: capacity approx. 800 Ltr. Feed hopper: approx. 11.5 cbm Machine weight: 37,500 kg Transport dimensions (LxWxH ...

The machine is functional and currently still under power, incl. loading magazine Irco Breuning Simag 42.1 for rods max. 3200mm, incl. many tool holders also driven (list can be requested), please contact me if you are interested or have any questions.

Machine: Double Head Chainsaw Blades: 2x Ø500 mm widia, bore Ø32 mm (reducing) Tilt: 90° / 45° / 22.5° + intermediate positions Blade motors: 2x 2.2 kW (3 HP), 2800 rpm, three-phase 230/400V-50Hz Blade feed: pneumatic with hydraulic adjustment Cutting capacity: min. 305 mm / max. 4-6 m depending on version Heads: 1 fixed + 1 mobile (electronic positioning) Clamping: 2 vertical vices + 3 pneumatic horizontal vices Equipment: 2.5 m roller conveyor, nebulization lubrication, protective boxes, waste collection bin Control: PLC, Membrane Protected Keypad Operating pressure: 7 bar Auction-ID: A1-50215-31

AGICOM recycling machines

METABO Double Bench Grinder Manufacturer METABO Condition untested Location 63843 Niedernberg DE Lot 61

Eima Sliding Table Saw Type 122 Cutting width min/max 210-2565 mm Cutting depth of cutting 2500 mm Maximum blade diameter 400 mm Cutting height ~100mm Tilting cutting unit 90° – 45° 2×4.4kw motor Total power requirement 10kw Electronic Cutting Width Eats Technical documentation and CE certificate Net price

Equipped with lower and upper clamping Auction-ID: A1-49785-49

Clextral extruder, Type: Evolum EV032 M, Extruder: 40D, Barrel length: 10 x 128 mm, Stroke length: 1420 mm, Water: 4.5 - 5.5 Bar, Compressed air: 6 Bar, Steam injection: 2 - 6 Bar, Power: 3 x 400V, 50Hz, 83kW, Dimensions: 4475 x 1200 x 2100 mm, Weight: 1905 kg, Only 80 working hours!, Clextral water pump, Type: CLX DKM, Flow: 6 - 42 l/h, Pressure: max 10 Bar, Reservoir: 7.5 litre, Power: 0.55 kW, Dimensions: 1265 x 350 x 700 mm, Clextral / Prominent oil pump, Type: GMXA1604, Flow: 0.3 - 2.5 l/h, Pressure: max 10 Bar, Reservoir: 10 litre, Dimensions: 900 x 700 x 1150 mm, Clextral High Moisture Extrusion Cooking die, HMEC type: 2 x 800 mm length, Material: CLX202, Internal section: 60 x 8 mm, Dimensions: 1900 x 700 x 1200 mm, TLV steam kit, Type: 2/10 TLV, Serial number: SV148, Steam flow: 2 - 10 kg/h, Steam pressure: 6 - 10 Bar, Maximum pressure: 10 Bar, Steam inlet: DN15, PN16, Steam out ...

Calibre: 25 - 85 mm, Clips: E200 to E240, Stuffing horn: 28 mm, Compressed air: 6 Bar, 5.7 Nl, Power: 230VAC, 50Hz, 0.3kW, Dimensions: 1250 x 700 x 1800 mm, Weight: 100 kg

Working width 180 - 3200 mm, electronic setting Sieb & Meyer Fixed side at the left Chain transport, 80 mm wide Infeed for panels of about 1 m. Top pressure by driven belts Max. workpiece thickness: 80 mm Feedspeed 7 - 35 m/min, motor 2,2 kW Pop-up dogs every 1m10 Equipment left / right: 1 st post Front: 1+1 Jump scorer, motor 1,5 kW, 100 Hz, joined to 1+1 Hogger, motor 3 / 4,4 kW, 50/100 Hz Rear: 1+1 Jump milling, tilting, motor 1,5 kW, 100 Hz 2nd post Front: 1+1 Jump milling, tilting, motor 1,5 kW, 100 Hz Rear: 1+1 Fixed milling, tilting, motor 2,2/3,3 kW, 50/100 Hz 3th post Front: 1+0 Jump milling, tilting, motor 2,2/3,3 kW, 50/100 Hz Rear: 1+1 Jump milling, tilting, motor 1,5 kW, 100 Hz All units with horizontal/vertical adjustment and Siko read-out Outfeed chain approx. 80 cm length Sound and safety enclosures

Workpiece sizes: Length 180 - 2500 mm, width 150 - 800 mm, thickness 12 - 40 mm Fixed side at the left, motorised width adjustment of the right side Working height/ transport height: 920 mm Workpiecetransport with belts, infeed belts can lift up Variable feed speed Each side has got 5 glue injectors and 8 dowel inserters (Type 34) Doweldiameter: 8 mm, dowellength 30 mm, dowelprojection 7-14 mm, dowelcenters min. 32 mm, max. 736 mm Each side with dowel hopper feed with shaker and separators Controll mirror Glue pump 1:1 Glue injection controlls type ELC

The chassis is based on a torsion axle from a renowned manufacturer and is equipped with independent torsion suspension. Tyres in size 155/70 R13 are used. The trailer has a tilting V-drawbar, which provides excellent stability while driving. The base is made up of curved profiles of galvanized sheet steel that are bolted together. Auction-ID: A3-46124-17637

Payload: 930 KG Nissan NV300 1.6 Diesel EURO 6b 72,000 Original Kilometres, Verifiable with CARPASS Light Cargo Double Cab 6 Seats Air conditioning Radio bluetooth / USB / AUX Electric Windows Power exterior mirrors Central locking Cup holder Auction-ID: A3-46124-5020

Iveco Eurocargo 90E18 4x2 truck with double cab, built in 2009. Equipped with 7 seats, open cargo box with folding side and rear boards and separate closed material box behind the cabin. Equipped with a 3,920 cc diesel engine with an output of 134 kW (approx. 182 hp), manual transmission and Euro 5 emission class. Odometer reading: 203,113 km and 5,075 hours of operation. Own weight 5,080 kg, GVW 9,000 kg and payload approximately 3,920 kg. Wheelbase 4,815 mm and total length 8,640 mm. Belgian vehicle documents available. Inspection valid until 12/06/2026. Vehicle starts, drives and brakes properly. Auction-ID: A3-46124-22053

Specifications: Quantity: 2 complete wheels Application: double wheel set / extra rear wheels for tractor Tire brand: Kleber Tyre Size: 16.9 R38 Agricultural profile Both tyres mounted on steel rim Includes mounting hooks/clamps Coming from a Fiat tractor Used condition Rims show surface rust Tyres show signs of wear; profile still looks decent in the photos Compatibility with specific tractor must be checked by the buyer himself Auction-ID: A3-46125-10239

Professionally converted vehicle Automatic gearbox Paddle shifters on the steering wheel Front LED light bar Additional LED strobes Webasto sunroof Roof fan Raised floor Rear ramp/platform Storage module with 2 drawers Adjustable rear seats on rails USB Connectors 12V socket Automatic air conditioning Bluetooth radio Multifunction handlebar Cruise control / speed limiter Lane Keeping Assist Parking sensors Hill Assist ESP Electric windows Electrically adjustable exterior mirrors Central locking Height-adjustable handlebars Multiple storage compartments LED Daytime Running Lights Auction-ID: A3-46124-5040

pressure: - t distance between columns: - mm stroke: - mm total power requirement: - kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Double softening system consisting of: - 2 GRP pressure vessels (Pentair) - 2 control heads (1 control head must be renewed) - 1 sole tank - Control unit MMP 81 (Gebrüder Heyl) - Piping with pneumatic diaphragm valves The plant is dismantled and stored in Warburg.

MODEL SL-150 Power t 150 Motor power kw 4 Piston stroke mm 250 Working speed mm/s 3.1 Return speed mm/s 4 Head displacement mm 1,000 Front light mm 1,500 Side light mm 340 Max. vertical span mm 955 Bed light mm 405 Total front mm 2,150 Total side mm 1.180 Total height mm 2.805 Weight kg 2.350 STANDARD DESCRIPTION: The S-series hydraulic presses are specially designed for extraction, casing and straightening work. They work with a hydraulic pressure of less than 320 bar, which guarantees greater durability of the entire hydraulic system. STRUCTURE: They consist of an electro-welded structure with four uprights with open sides. They are equipped with a movable bed that allows it to be positioned at different heights. The fixing is done by means of two pins located at the bottom of the bed. The raising and lowering system is carried out by means of cha ...

STANDARD FEATURES: Power 50 t Motor power 1.5 kw Working speed 2.25 mm/s Return speed 4.50 mm/s Maximum pressure 500 bar Piston stroke 150 mm Spindle stroke 120 mm Front light 800 mm Side light 160 mm Max. vertical span 1,020 mm Bed light 205 mm Total front 1,090mm Total side 900 mm Total height 2,000 mm Weight 295 Kg. Specially designed for extraction, bushing, straightening, etc. The hydraulic presses of the S series consist of a four-pillar electro-welded structure with open sides. They have a movable base that allows it to be positioned at different heights. The fixing is by means of two pins located at the bottom of the bed. The raising and lowering system is by means of chains driven by the cylinder of the press. SD Models: are fixed head. Double-acting cylinder with chrome-plated plunger and anti-wear guides. It is equipped with a removab ...

TJF-GARNET SPECIAL HYDRAULIC PRESS: Hydraulic press with double upright equipped with two side cylinders joined by a plate for the pre-pressing and pressing of rotors and stators, and a central cylinder for the extraction of the mandrel and stalling of the rotor shaft, as well as the extraction of shafts in case of repair. It has a removable table for the stacking and handling of rotors and stators. MAIN CYLINDERS 150 TN.  2 hydraulic cylinders of 75 Tn. of power each, with a stroke of 1200 mm joined by a grooved plate, with a central bore of 250 mm in diameter.  Maximum useful height cylinder plate of 1550 mm.  Minimum useful height cylinder plate of 350 mm. ABSTRACTION CYLINDER  1 central cylinder of 80 Tn of power with 1200 mm stroke.  Prepared to adapt abstraction clamp, end of threaded stem to M 35,150 x 40 in length.  Maximum useful height ...

Technical data Manufacturer: KONE Type: Double girder overhead crane (crane 071) Capacity: 50 / 2 × 25 / 2 × 8 t Wingspan: 24 m Inventory No.: 0602-72-71 Configuration Trolley, load capacity 50 t 2 trolleys, load capacity 25 t each 2 trolleys, load capacity 8 t each Remote control Driver's cab Auction-ID: A7-50461-13