double cross cut used for sale

tower silos 4 x 50 m³ / 50000 litres of polyester tanks / Tower silos / flour silos, GRP silos, grain silo / hopper silo / compound feed component silo Top condition Content per silo: 50 m³ / 50000 litres piece / pc: 4 pieces Year of construction: 1994 mass of Tower silos without steel: approx. Ø 2,80 x 12 m high Height of the entire system: 21 m Density/weight: 1,200 kg per m³ approval number: Z 10-22-42 Manufacturer: Polem More details: the silos are in good used condition. According to the age traces are present. The system has complete works until its closure. The system could not be tested yet, because there is no power supply. It is a complete meal silo plant with very thick-walled 4 x 50 m³ GRP silos with a density/weight 1200 kg per m³ is each silo separately to fill up the tanks through several cross conveyor (scraper conveyors). The silo is a spray head to cle ...

bag width 80 - 260 mm bag length 160 - 450 mm Available: sofort

Technical data: hydraulic undertable circular saw unit - drive power motor 7.5 kW- diameter saw blade Z=48x5 600 mm- diameter saw blade bore 30 mm- inclined working table Yes- Automatic rotation of the table -70C 0C+70C- Speed of rotation from / to 0C / 70 C 3s- Positioning accuracy +/- 0.2C- Pneumatic workpiece holder 2 pieces- Pneumatic side organizers 2 pieces- Safety cover via capping unit Yes- Cutting capacity at 0C: 160 x 310 mm, 80 x 390 mm- cutting capacity at 45C: 160 x 220 mm, 80 x 270 mm cutting capacity at 70C: 160 x 90 mm, 80 x 130 mm- minimum workpiece thickness 10 mm connection values - supply voltage 400 V / 50 Hz- Control voltage 24 V compressed air requirement at 8 bar per cycle approx. 8 Nl- Suction nozzle FI100 mm 2 pieces- Suction nozzle FI160 mm 1 piece- air speed Suction in center of nozzle approx. 25-35 m/s Electronically controlled slider:- Loading length: 6000 m ...

Cross off feed for roller conveyor L x W x H: 400 x 230 x 80 cm Weight 4000 kg Built in 1978 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Cross conveyor for removal of boards L x W x H: 5 x 4 x 1 m Weight 3000 kg Built in 1978 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Powder coating plant for large parts "Kigo O.E." Example: (all large foods can be changeable individually) Space requirement: 30 x 15 meters Part size: L= 6.200mm B= 2.300mm H= 2,000mm Cleaning cabin walkable incl. sprueh wreath automatically 1 dimensions of the cabin Load length 9,000 mm Width 4,500 mm Height 3,400 mm 2 dimensions of tanks Load length 1,200 mm Width 850 mm Maximum 1,000 mm 2 dimensions of the cabin Completely Load 9.140 mm including tanks width 5,580 mm Height 4,200 mm Coating cabin walkable, manual coating 1 Dimensions Cabin Length 9,000 mm Width 4,500 mm Height 3,400 mm 2 Dimensions cabin including suction Load length 10.125 mm Width 4,500 mm Height 3,400 mm Powder incineration furnace 1 inner dimension length 6,500 mm 2 Inner dimensions width 2,500 mm 3 Inner height height 2,950 mm 4 Outer dimensions incl. therm ...

Pneumatically operated. Diameter: 180 mm 200 mm 220 mm 250 mm

Leitz Wetzlar measuring microscope with cross slide and micrometer screws Extensive setting possibilities. Cross table, dislocation 0.01mm shift of the optics via micrometer screw possible. Dhxmkdfga Size approx. 40x Degree scale in optics via micrometer screw rotatable to the reference line Special price

Three T-slot plates of a copy-fraes machine from Lid are offered. The T-slot plates can be mounted as a cross table. Scope of delivery only according to photos, without spindles. If you are interested, please request more photos. Further spare parts of lide e.g. towing table of a KF3 pre-wheels. Please ask. Special price Lid cabinet tool cabinet

Cross slide unit with 2 spindles, for conversions or adaptations

Mobile package crosscut saw Holtec Caps star o package cross-section up to 1.25 m x 1.25 m o Round wood diameter up to 1.60 m o Electric motor 11 KW o Pointed tooth chain o Double-sided stellitierte rail (Quad reversible) o Bar length: 1.90 m

Mixing soft / empty suction valve Input / output diameter: 38mm

6x NUMMERATORS CROSS PLATE, FORWARD, SMALL No. of the Wheels: 7 Fig.Size: 3/16 Prefix Arm: RA

No. of the Wheels: 7 Fig.Size: 3/16 Prefix Arm: RA

Technical data: Length: 1.0 m Stanganzahl: 4 St Drive: 4,0 KW

Technical data: Roll width: 1200 mm Length: 27 m Roll diameter: 168 mm Roller spacing: 800 mm Cut-outs: 5 PCs. Switching flag: 1 PCs. Power: 4,0 KW With built-in honing cross conveyor: Distance: 2.99 m Line number: 5 line Drive 2,2 KW

CROSS TABLE -Afmeting 600 x 240 mm -Panel verplaatsing 400 x 150 mm DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

Crossing pipes in different lengths and wall strands in stock Price depending on wall thickness and length

shuttleworth conveyor

Item number 67379-0101 Transformer cross seam welding for Tetra Pak TBA 8 aseptic filling machine

compensating stacker max format: 310mm x 470mm (12 1/4 x 18 1/2 inches) min format 100mm x 140mm ( 4 x 5 1/2 inches) mechanical speed 14 000/h depending on product product thickness : max 20mm, 3/4 inches weight: 900 kg

Cross conveyor 7-stranded or individualized was built and designed as an individual of boards, posts and prisms Mass: Length 6.15 meters Width 1.75 meters Height 1.75 meters Rise angle 62 degrees and 53 degrees 7 strands with associated cross-conveyor elements 1.33 meters long

BÜHLER MAYF 140 Valve pipe crossover without solenoid valve with limit switch Checked and overhauled We have three pieces of this model in stock, along with many other pipe valves, inlet valves, flaps, pipe crossovers for a wide range of applications. We look forward to hearing from you!

achkettenquerförderer or Auschutisch with pull-off cross conveyor. Chains with roof chain takers. 5 chain strands. Length 5,900 mm. Spread width 2,000 mm. Total width 2,400 mm. Chain spacing: 750 - 750 - 1250 - 2000 mm. Fully plated. Drive via gear motor with 3 KW and adjustable slip clutch. Sprockets with clamping elements. Chain 80 x 40 x 6 mm. Technically reviewed and tested. Trial run possible.

specifications: - Clamping area approx. 400 x 300 mm - Travel across x approx. 500mm - Travel along Y approx. 300mm - 2 Handwheels - Height 220 mm - 4 T - grooves 14 mm - Distance of the T - grooves approx. 72mm - Space required approx. W 1100 x D 900 x H 220 mm - Weight approx. 190 kg

Fine sanding machine Working width: 1300 mm. Workpiece thickness: 3 - 140 mm N? of units: 2 Crossbelt, CSD sanding pad, belt sizes 4900 x 150 mm, 13/17 kW motor, 12 and 24 m/s belt speed, belt cleaning Wide belt, CSD sanding pad, belt sizes 2620 x 1350 mm, 13/17 kW motor, 10 and 20 m/s belt speed, belt cleaning, first belt guiding roller with excenter adjustment for light calibration Fibre brush 150 mm diameter, 1,5 kW Vacuum-feedbelt suction, 7,5 kW fan Feedmotor 3 kW, feedbelt speed 4,5 - 22 m/min Motorised rise and fall of the table Panel tracers with 16 mm centers

Conveyor for wet pieces in laquer line Length: 3 m. Width: 1,3 m. Cleaning brush at the bottom Motorised feedworks

Number of milling spindles: 2 St. fence: 1 ja workpiece: ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

28 fields pallet rack with 2 truss levels each - 29 stands / 112 trusses - Truss length 2.70 m - Load per level 2.4 tons - Shelf height: 3.50 m depth 1.10 m -Dismantled - all small parts (screws, locking pins, feet/floor plates etc.) new! Item location: Bavaria (Rosenheim area) / Germany / Hesse (Fulda area) / Germany / Tyrol /Austria Prior sale is reserved ______________________________________________________ Freight / Delivery Current non-binding estimated freight costs for the German federal territory amount to 450 euros. Delivery time up to approx. 4 weeks Shipping throughout Europe by arrangement and mail confirmation. Commercial customers from EU countries (Austria, Italy, etc.) with a corresponding VAT number (e.g. AT/IT) will each receive a net invoice. Assembly On request, we will also be happy to make you an offer for the assembly. Contact  ...

table length: 225 mm table width: 175 mm x-travel: 120 mm y-travel: 110 mm table height: 140 mm T-slots: 12 mm weight: 17,5 kg dimensions: 0,35 x 0,35 x 0,22 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 685 mm width: 460 mm height: 115 mm T-slot - width: 10 mm T-slots: 3 Stück Payload: 40,0 kg width: 315 mm length: 340 mm travel -x axis: 285 mm travel -y axis: 140 mm manual control device: 0,04 Nonius mm weight: 45,0 kg Properties: for light milling work on table or crevice drilling machines Ground clamping surface Dovetail guide adjustable by means of wedge lines The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 430 mm table width: 240 mm x-travel: 225 mm y-travel: 160 mm table height: 160 mm T-slots: 12 mm weight: 45 kg dimensions: 0,6 x 0,45 x 0,2 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

approx. 5 stair crossings - used - : Price per piece ex location: 950.-€ (net), dismantled, packed and loaded! Manufacturer: euroline Year of construction: unknown, probably 2015 approx. 4 x Transition 5124206 Size: 06 Step load capacity: 150kg Total load capacity: 300kg Top step or transition at 1.30m Width approx. 87cm 1x Transition 5124207 Size: 7 Step load capacity: 150kg Total load capacity: 300kg Top step or transition at 1.54m Width approx. 87cm Condition: good Available: from the end of Oct./Nov. 2021 Location: Tübingen

We have 3 pieces in stockFor setting down bread and rollssuitable for oven loaders and feeding tablesfor net belt and reversing ovensfor deck ovens with pull-out cookersmade of stainless steelOn roller trolleys Dimensions : W: 231cm D: 70cm H:188cmPeeling dimensions : W: 207cm D: 56cmSee picture for details

- Ceramic modules - Filtering surface: equipped with a filtering surface of about 28 m2 - Maximum capacity of the filtering surface 42m2 - In good condition

table length: 330 mm table width: 220 mm x-travel: 210 mm y-travel: 125 mm table height: 150 mm T-slots: 12 mm weight: 33 kg dimensions: 0,41 x 0,35 x 0,22 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions basic machine approx. 3000x2000x2300mm.; Length of feed roller conveyor approximately 5200mm.

Suitable for rigid foam, sawing width: 1250mm, max. sawing height: 200mm, max. speed: 12m/min, with controls cabinet or saw blade.

Working width: 2500mm, laying width: 2500mm, speed: 55-60m/min, web weight: 80-500g/m², length: 6350mm, width: 3820mm, height: 1935mm, operational hours: ca. 59,000h.

offer 22317 Specifications: - Saw blade dimensions up to 315 x 2 x 40 mm - Saw blade spindle speeds 43 + 86 rpm - Cutting range at 90° around 100 mm - square 80 mm - flat 105 x 70 mm - Cutting range at 45° left around 80 mm - square 70 mm - flat 75 x 70 mm opening width of the material clamping stick 175 mm - Material stop 1000 mm - Drive 400 V / 2.5 / 3.0 kW - Space requirement approx. W 600 x H 1400 x D 1000 mm - Weight approx. 180 kg - 7 saw blades

Technical data: SEGA BIANCO MOD. 350 UNDOCUMENTED

Cross-flow scraper mobile version for the treatment of mixed waste fractions (municipal waste, biowaste, scrap metal, packaging, etc.) - Material input via vibrating chute - Efficient shredding in QSZ (1,600 mm) - Material transport via discharge belt below QSZ - Material discharge via conveyor belt (foldable) - Metal sorting by means of an overbelt magnet (neodymium) - Hook lift holder for transport - Motor power: 160 kW, 50 Hz, 400 V -Material discharge: screen discharge made of wear-resistant steel, screen plates are individually replaceable, Various hole geometries and sizes possible, external discharge box with flange connection for dust extraction - Contaminant discharge: discharge opening with hydraulically operated slider, incl. hydraulic unit and inductive end position sensors - percussion mechanism: chain mounting system for the use of up to fou ...