double column milling used for sale

Double air pump from CAIRE (AirSep), type CO416-2, equipped with FASCO electric motor. Connection voltage 230 V. Suitable for air and aeration applications. Auction-ID: A1-41277-135

Double air pump from CAIRE (AirSep), type CO416-2, equipped with FASCO electric motor. Connection voltage 230 V. Suitable for air and aeration applications. Auction-ID: A1-41277-134

Sold without the furniture. Plate of 40cm in diameter. Auction-ID: A1-47151-21

Top and bottom planer, width: 610mm, Supply/discharge table (257x107x85cm) with 4 rollers; including flexible hoses up to the ceiling Auction-ID: A1-44305-18

- Dual-stream mill for fine wood chip production with segmented internal grinding elements. - Main motor power 315 KW. - Equipped with PALLMANN CLEANOMAT system (installed according to documentation in 2009). - Upper feed hopper with vibratory system and magnet for separation of metal elements. - Stripper. - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-43986-14

For sale Doosan Multi Task CNC turning center type MX2100LST with a Fanuc 31i-A controller. This Doosan MX2100LST is a high-quality, multifunctional 9-axis CNC turning/milling center. The machine combines the functions of a CNC turning and machining centre in a single clamping (turning-milling). Capacity & Working Area Maximum turning diameter: 540 mm Maximum turning length: 1,540 mm Maximum diameter over bed: 750 mm Maximum diameter over thrust axis: 650 mm Spindles (main and counter spindle) Both spindles offer identical performance and thus enable the symmetrical transfer and machining of workpieces: Lift Plate Size: 8 inches (optional 10 inches) Maximum speed: 5,000 rpm Spindle motor power: 22 kW Spindle bore / Maximum rod diameter: 65 mm. C-axis resolution: 0.001 degrees (on both spindles) Milling spindle (B-axis head) The upper processing head is a fully controll ...

Equipped with scoring unit with electro-pneumatic deployment control; Machining with cross support; joint milling unit with 2 motors and cross support; universal saw/milling motor with cross support; conveyor chains; upper pressure with chain and web steering; stepless feed speed 8 - 40 m/min; working height 900 mm; workpiece thickness up to 100 mm; workpiece overload min. 15 mm, max. 200 mm; minimum working width 70 mm single-sided, 200 mm double-sided; supply motor 4kW; including power box, extraction hose/pipes up to the ceiling, various separate hoods and manual; Auction-ID: A1-44305-16

- Includes 2 parallel mounted crimping lines. - Length of the boards from 2440 mm to 2850 mm. - Width of the boards from 1830 mm to 2100 mm. - Thickness of the boards from 3 mm to 40 mm. - Each line consists of: • Automatic panel loading system. • Paper positioning system. • SIEMPELKAMP press: plate dimensions 2950 x 2200 x 150 mm, maximum opening 270 mm, total pressing force 23940 KN, maximum working pressure 320 Bars, working temperature 220° C, heating of the plates with thermal oil, maximum performance 150 pressing/hour. • Edge cleaning unit. • Tilting cooling table. • Intermediate conveyors. • Artificial vision system. - Automatic strapping machine BIELE and final magazine (common to the 2 lines). - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of th ...

Technical details Manufacturer: Bomag Model: BW 90 SC-5 Type: Double drum articulated compaction roller Year: 2014 Operating mass: 1650 kg Maximum mass: 1900 kg Engine power: 15.1 kW Configuration: - Double drum compaction system - Articulated chassis Application: - Soil and asphalt compaction - Road construction - Pavement and groundwork operations Condition: Used Auction-ID: A7-47172-5

In its original crate. Never used. Case size: 155 x 67 x 40 Auction-ID: A1-46992-10840

In its original crate. Never used. Case size: 155 x 67 x 40 Auction-ID: A1-46992-10150

in working condition. tested for function. There is no right of withdrawal.See the Auction Terms and Conditions for more information. The minimum age for visiting the viewing and collection days is 18 years. Visitors must be able to identify themselves. A forklift is available during the collection day. The maximum lifting capacity is 3 tonnes. Use of the forklift truck is entirely at your own risk. In addition, waiting times may occur. All irregularities and signs of wear may not be clearly visible on the images. It is strongly recommended that you take advantage of the viewing day to personally inspect and assess the condition and appearance of the lot. Auction-ID: A7-46902-38

Double scissor lift table TREPEL EH20/9 built in 1984 3500x1000 mm Lifting height 1600 mm Load capacity 2 t Roller conveyor attachment 3500x800 good used condition, in use until 02/2026

Information: Height: 1.83 m Wire gauge: 6/5/6 Quantity: 30 pieces linear meters: 75 m Posts: 31 pieces Colour: RAL 7016 anthracite Fence package: - Total length of 75 m - Complete set incl. posts and fastening material (U-bracket sets + hook cap) - Fence elements: 2510 mm long - Horizontal wire rods: 6 mm diameter - Vertical wire rods: 5 mm diameter - Mesh size: 50x200 mm - 30 x Fence element - 31 x fence posts with 600 mm ground recess - 31 x hook cap as cover for the fence post - 93 x U-bracket set for attaching the fence element to the fence post (= 3 pieces per post) Note: - Larger quantities may be possible on request - Shipping available on request for an extra charge

Information: Height: 1.63 m Wire gauge: 6/5/6 Quantity: 30 pieces linear meters: 75 m Posts: 31 pieces Colour: RAL 7016 anthracite Fence package: - Total length of 75 m - Complete set incl. posts and fastening material (U-bracket sets + hook cap) - Fence elements: 2510 mm long - Horizontal wire rods: 6 mm diameter - Vertical wire rods: 5 mm diameter - Mesh size: 50x200 mm - 30 x Fence element - 31 x fence posts with 600 mm ground recess - 31 x hook cap as cover for the fence post - 93 x U-bracket set for attaching the fence element to the fence post (= 3 pieces per post) Note: - Larger quantities may be possible on request - Shipping available on request for an extra charge

Swivelling angles: 45°/90°/135°, max. speed: 2800rpm, working length: 5350mm, saw blades: 2 carbide-tipped saw blades 420x30mm, extraction connection: 160mm, compressed air connection: 6-8bar, power per motor: 2.2kW, length: 4200mm, weight: 900kg. Features: hydropneumatic saw feed, digital display, center support, handwheel, four pneumatic clamping cylinders, electrical control for parallel operation of machine and extraction system, fixed stop 24mm next to the fixed saw unit, adjustable via scale, with documentation. An on-site inspection is possible.

Technical data Manufacturer: RAPID Maschinenbau GmbH Machine Type: Double mitre saw Model: DGL-4000/500 Machine No.: 4653 Year of manufacture: 09/1995 Application: Cutting of aluminium and plastic profiles Saw blade holder: 500 mm Cutting length: 4000 mm Drive: 2 three-phase motors 3 kW each Speed: 2800 rpm Angle range: 45° - 90° Digital Angle Display: Resolution 0.05° Saw feed: fully pneumatic / hydropneumatic Length adjustment: electric motor with handwheel fine adjustment Configuration Equipment: Horizontal profile tension, profile height device, profile stop, support desk for dimension lists Safety equipment: Two-hand operation, main switch with zero voltage trigger, noise protection hoods Additional equipment: Pressure regulator with filter and automatic dewaterer, cleaning gun Option: Special design with extended cutting range incl. ALKO  ...

4-side squaring and edge banding line Machine 1: Fixed side right, moving side left Rolling chain, feed 10 - 40 m/min Controlls NC 21 Panel thickness 8 - 60 mm Max. panel width 1500 mm Edges: coil 0,3 - 3 mm, strips 0,4 - 20 mm Entry fence for veneered panels Equipment: 1+1 Compact-twin hogger, 2 motors 6,6 kW 1+1 Compact hot melt unit A20 with panel edge pre-heating, glue roller Q34, twin coil magazine, lateral pressure rollers C including anti-stick application 1+1 Free space for solid wood edges up to 2,54 m length 1+1 Rough trimming, 2 x 1,5 kW 1+1 Fine- or radius trimming, 2 x 0,4 kW (edges up to 6 mm) 1+1 Universal shaper 8,1 kW 1+1 Universal shaper 8,1 kW 1+1 Edge sander KS 10 1+1 Disc sander DS 40 1+1 Disc sander DS 40 Angular transfer to the right, TWR 24/30/12/S Panel sizes: width 250 - 1200 mm, length 250 - 3000 mm, thickness 8 - 45 mm Machine 2 Machine II + infeed magazine TW ...

Workpiece sizes: Length 180 - 2500 mm, width 150 - 800 mm, thickness 12 - 40 mm Fixed side at the left, motorised width adjustment of the right side Working height/ transport height: 920 mm Workpiecetransport with belts, infeed belts can lift up Variable feed speed Each side has got 5 glue injectors and 8 dowel inserters (Type 34) Doweldiameter: 8 mm, dowellength 30 mm, dowelprojection 7-14 mm, dowelcenters min. 32 mm, max. 736 mm Each side with dowel hopper feed with shaker and separators Controll mirror Glue pump 1:1 Glue injection controlls type ELC

Working width 180 - 3200 mm, electronic setting Sieb & Meyer Fixed side at the left Chain transport, 80 mm wide Infeed for panels of about 1 m. Top pressure by driven belts Max. workpiece thickness: 80 mm Feedspeed 7 - 35 m/min, motor 2,2 kW Pop-up dogs every 1m10 Equipment left / right: 1 st post Front: 1+1 Jump scorer, motor 1,5 kW, 100 Hz, joined to 1+1 Hogger, motor 3 / 4,4 kW, 50/100 Hz Rear: 1+1 Jump milling, tilting, motor 1,5 kW, 100 Hz 2nd post Front: 1+1 Jump milling, tilting, motor 1,5 kW, 100 Hz Rear: 1+1 Fixed milling, tilting, motor 2,2/3,3 kW, 50/100 Hz 3th post Front: 1+0 Jump milling, tilting, motor 2,2/3,3 kW, 50/100 Hz Rear: 1+1 Jump milling, tilting, motor 1,5 kW, 100 Hz All units with horizontal/vertical adjustment and Siko read-out Outfeed chain approx. 80 cm length Sound and safety enclosures

STREMA Double Head Stretch Wrapper – Model A 5000B IIDBE Year of manufacturing: 2017 Capacity: 15 wraps: 127 pallets/hour - including pallet lifting station - including top sheet dispenser - including safety guarding - including pallet conveyors (suitable for half pallets). The machine is in good condition.

Serial number: M274150 Speed range: 2800 rpm Voltage: 400 V Frequency: 50 Hz Power: 7 kW Current: 18 A Max. machining length: 6100 mm Reference: Groven - Lot 22 Auction-ID: A7-46763-318

Please note. The buyer must disassemble it from the ground himself. Auction-ID: A1-46933-45

Operating voltage: 220/380 V Frequency: 50 Hz Rated current: 4.0/2.3 A Speed: 1450 rpm Grinding wheel dimensions: 300/50/76 mm Reference: Schönichen - Lot 88 Auction-ID: A7-46763-295

Speed: 2800 rpm Connection: 0.8 kW Operating voltage: 220/380 V Frequency: 50 Hz Grinding wheel diameter: 180 mm Grinding wheel width: 30 mm Reference: Beeper - Lot 69 Auction-ID: A7-46763-27

System: Demag. Lifting capacity: 2x500kg, span: 4500mm. This is disassembled and ready for collection. Without rails. Auction-ID: A1-46933-87

Serial number: 13114001 Operating voltage: 400 V Connection: 1.5/2.2 kW Rated current: 3.5 / 5.0 A Speed: 1450/2900 rpm Grinding wheel diameter: approx. 200 mm Reference: Veatec - Lot 29 Auction-ID: A7-46763-259

System: Demag. Lifting capacity: 2x500kg, span: 2500mm, wheel distance: 750mm. Already disassembled. Auction-ID: A1-46933-103

Serial number: M275930 Power: 7.7 kW Current: 19 A Voltage: 400 V Frequency: 50 Hz Speed: 2820 rpm Max. machining length: 6000 mm Reference: Groven - Lot 19 Auction-ID: A7-46763-316

Operating voltage: 220/380 V Frequency: 50 Hz Rated current: 1.4/0.8 A Connection: 300 W Speed: 3000 rpm Grinding wheel dimensions: 175 x 25 x 32 mm Reference: Apprentice workshop part 2 - Lot 3 Auction-ID: A7-46763-247

Gildemeister GMX 250S Linear Turning/Milling Center CNC Cover Maho DMG Hersteller [manufacturer]: Gildemeister Deckel Maho DMG Type [ type]: GMX 250S Linear Control [control unit]: Heidenhain Plus IT 3D CNC Pliot 4290 plus it Baujahr[construction year]: 12/2008 the premier class of turning and milling! Important key data of the GMX 250S Linear: • 7 Axis Turn-Mill Center • Main and counter spindle • B-axis up to 240° • Milling spindle up to 12,000 rpm • Tool magazine up to 80 places • Siemens 840D or Heidenhain control • Linear actuators for high dynamics and accuracy • Machining diameter approx. 520–640 mm • Turning length up to approx. 1,185 mm Typical equipment: • Y-axis • Powered tools • Bar feeder • High-pressure cooling • Probes • Chip conveyor • HSK-A63 milling spindle • Sub-spindle for complete machinin ...

Max. cutting height: 110mm Auction-ID: A1-40977-64

Steel Workshop Base Cabinet – Double Doors with Shelves and Drawers Description: Sturdy workshop base cabinet made of painted steel (blue), equipped with two hinged doors. Practical interior design including shelves, storage compartments and small drawers/lockers (see photos). Ideal for storing hardware, parts, tools and consumables. The top tray is designed in the shape of a bin with raised edges to prevent objects from falling. Condition: Pre-owned condition – workshop condition with normal signs of use. Sale: Sold as is, as shown in the photos. Auction-ID: A1-47080-32

Saw blade bore diameter: 32mm Max. cutting length: 4040mm Auction-ID: A1-40977-89

Cutting depth: 120mm Auction-ID: A1-40977-39

Steel Workshop Base Cabinet – Double Doors, Shelves & Compartments Description: Sturdy workshop base cabinet made of painted steel (blue), equipped with two hinged doors. Practical interior design including shelves, storage compartments and small drawers/lockers (see photos). Ideal for storing hardware, parts, tools and consumables. Condition: Pre-owned condition – workshop condition with normal signs of use. Sale: Sold as is, as shown in the photos. Auction-ID: A1-47080-33

The closed trailer is in used condition, here and there damage around and inside. Only the cupboard belongs to lot without the tools! With battery system and folding doors. The dimensions are estimated. Auction-ID: A3-44487-34006

Cutting depth: 120mm Auction-ID: A1-40977-31

The trailer is in good condition, some damage here and there. Interior of the remorque is full of goods, therefore there is no photo available. Auction-ID: A3-44487-34007

Pedestal grinder for roughing, sharpening and finishing operations of metal parts. Equipped with double grinding wheel, transparent protection screens and adjustable tool supports. Electric drive by means of a central motor integrated into the body of the machine. Suitable for maintenance, adjustment and tool preparation work in mechanical and industrial workshops. Auction-ID: A7-47328-29

Auction-ID: A1-46783-28

Haffner double miter saw, model GL 179. Machine for cutting profiles using circular saw blade. Equipped with vertical pneumatic grippers for the clamping of the piece. Suitable for the angular cutting of aluminium, PVC and similar material profiles. Power supply 220/380 V, 50 Hz. Made in Germany (West Germany). The electrical panel is open and requires revision before commissioning. Year of manufacture unidentified. Auction-ID: A7-47333-3

Auction-ID: A1-46783-75

Double bench grinder MOTORENFABRIK ALBERT OBERMOSER D DIG, 220/380 V, on steel table

Double bench grinder SOLID DS II, 0.3/0.5 kW, 380 V, No. 753616, on steel bracket with drip tray

Double bench grinder AEG D030/2, No. 347/6801, 220 V, on steel console

Double bench grinder SIEMENS-SCHUCKERT, nameplate illegible, mounted on steel parts processing table with vice, with suction cup and small table standing on the right side

Well-functioning Tecnodom double-door refrigerator. Viewing by appointment. Auction-ID: A1-40265-115

2 toilets; 2 sinks; ventilation grille; ventilation unit; light; toilet paper holder holder; lockable; 220v; drainage; forklift slots; crane hooks; 5891 Auction-ID: A1-47513-16

For sale: Hyundai-Kia cnc lathe type SKT300MS. This machine is equipped with a Fanuc 21i TB control. De machine has a main and sub spindle. The chuck size on the subspindle is 300 mm with a bar capacity from 90 mm. The chuck size on the sub spindle is 8 inch (210 mm). Maximum turning diameter is 500mm, maximum turning length is 680 mm. The machine is equipped with a 12 position revolver with BMT-65 toolholders. All toolholders are included. Inclusive 4 pieces rotary toolholders. The machine has a toolsetter,parts catcher and a chip conveyor with right side discharge. On stock for sale