127,864 used machines on RESALE, but how to find them? Machine Search
S20 - used approx. 40 m³ / 40,000 litres steel tank, double-walled, coated inside, incl. 2 bases, dome shaft, railing and ladder. technical details: capacity: approx. 40 m³ / 40,000 litres material: steel tank double-walled DIN6616/2 weight: approx. 7 t dimensions: approx. Ø 2.50 m x 8.70 m long Includes 2 bases, a prefabricated dome shaft made of steel in accordance with DIN 6626 as well as a railing and ladder, as shown in the pictures. The dome shaft, the railing and the ladder had to be dismantled for transport and cut off at the top, but are included in the delivery. The customer has to refit and weld these attachments himself on site. Upon request and at additional cost we can also supply a propeller agitator. Used steel storage tank in very good condition, outside painted in silver, coating on the inside, former glycol tank, with 2 dome shafts and connection ...
Used Flottweg B-800 double-belt press. Technical data: Type: B-800 Hourly throughput [t/h]: 2-6 Belt width [mm]: 800 Drive power [kW]: 1.5 Electrical connection [V/A]: depending on the country of installation Pneumatic connection [bar]: 6 Design and operating principle: 1. The product is continuously fed into the feed box and evenly distributed on the lower belt. The height and width of the cakes can be adjusted to the specific product. 2. In the wedge zone, the upper belt is pressed against the product. A slow increase in pressure creates a stable product cake. 3. In the extrusion area, the cake is dewatered, first using a special profile roller, which ensures rapid liquid drainage to both sides of the cake. 4. The product is then effectively dewatered by pressure rollers with gradually decreasing diameters and increasing pressure. 5. Optional linear pressure rollers ...
Double-acting hydraulic cylinder, CK-80/56x0800-L004-H-B1X, Atos, new Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, Technical information: - Double-acting hydraulic cylinder with swivel eye - Specially manufactured for Frech/Weingarten die casting machines - Suitable for GDK 2000 to GDK 4100 machines - Frech item number 949390 - Piston diameter 80 mm, piston rod diameter 56 mm - Max. stroke 800 mm, piston rod thread M27 x 2 - Centre of swivel eye to retracted piston rod face 510 mm - Swivel eye d40 mm 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund th ...
Twin Screw Extruder Metalchem 2T9/4,5 for PCV, Made by Metalchem out-put 100 kg/h
Material: PVC / Details: DC motor 70 kW, degassing, counter-runner, vacuum pump, screw diameter 88-151 mm (conical) Throughput: approx. 300 - 400 KG/hr.
Material: PVC // Details: DC motor 27 kW, degassing, counter-runner, capacity approx. 150 - 200 KG/hr.
Compounding extruder Material: PE, PP, PS, ABS + fillers / Details: dcising, segmented screws and cylinders, degassing, vacuum pump, screw speed max. 300 rpm, DC motor 252 kW, heating power 98 kW, incl. side-feeding Leistritz LSB 90 (screws 2x x 90 mm, drive: 3.0 kW, screw speed: max. 150 rpm), Macromate SPS visualization. (attached photos are BEISPIELBILDER)
Material: PVC // Screw diameter 52-104 mm (conical), counter-rotor, motor: 15 kW, capacity: 20 - 140 KG/hr.
Material: PVC // Details: DC motor 10 kW, screw diameter 52 mm, L/D 16, degassing, capacity: approx. 10 - 70 KG/hr.
Material: PVC // with degassing, counter-rotor, DC motor 29 kW, screw diameter 86 mm, L/D 16 Capacity: 150 - 250 KG/hr
P181 - used approx. 40 m³ / 40,000 litres PE-HD-tank, plastic tank, flat bottom tank, double-walled with an outer hull. specifications: capacity: approx. 40 m³ / 40,000 litres material: PE-HD tank, plastic tank manufacturer: Formoplast Kunststofftechnik GmbH measurements: Ø approx. 3,49 m outside / Ø approx. 3,00 inside x height tank approx. 5,70 m / total height approx. 6,50 m mark of conformity: PA-VI 321.103 specific weight: 1,13 kg/L media: former chemical tank for formalin DIBT and media list available, suitable for AHL and ASL PE-HD tank, professionally cleaned and in good condition. Double-walled, i.e. with an outer hull, non-translucid, various connections such as ventilation, inlet, suction pipe, etc., lid on top of the roof. According to the media list suitable for many different chemicals e.g. iron chloride, hydrochloric acid, acetic acid, caustic soda, sul ...
Multifunctional cooking unit Frima VarioCookingCenter VCC 112, built in 2009, in a very good used and functional condition. Suitable for cooking, frying and frying. Two crucibles of 14 liters each (individually adjustable), temperature range 30-250° C, ceramic field, core temperature sensor. Digital control via touchscreen. Water inlet and drain, hand shower. With cabinets. Dimensions B/T/H 125/80/112 cm. Connection values 400 volts, 17 kW. Workshop-tested, ready for immediate use. Further on request.
Dopel membrane pump 1 inch with suspended solid pre-separator Pneumatically operated, mounted on transport trolleys on a mobile-by-mobile vehicle. Technical data: Gear ratio: 1:1 Maximum capacity: approx. 197.6 l/min Discharge quantity per cycle: approx. 0.88 l Air connection: 1/2" Nominal suction side: 1" Nominal diameter print page: 1" Maximum operating pressure: 8.3 bar Max solid diameter: 3.3mm Weight: approx.10 kg Lukra pumps, basement pumps Special price
Rexroth double pump for Battenfeld injection moulding machine R900737658 SYDFE1-20/100R R900737659 SYDFE1-20/071R
Double Mitre Saw Manufacturer: Duespohl Model: DGK 400 B Built: 2000 Cutting width: 100mm Cutting height: 100mm Saw aggregates Swivel: -45° - + 45°
Rexroth double pump for Battenfeld injection moulding machine SY2DFE1-2X/100-100 MNR: R901016480
Material: PE, PP, PS, ABS / Details: three-phase motor, DC, segmented screws and cylinders, degassing, vacuum pump, screw speed: max. 600 rpm, control: Resotec PLC
Double pipe heat exchanger pipe heat transfer for biogas plant, sewage treatment plant sludge hygienization - used - Manufacturer AEL GmbH Leisnig Type Double pipe heat transfer W202 Fabr. No. 7.0637.940/29-56 Built in 1997 Permissible betieb pressure 6 bar Permissible operating temperature 90°C Content 1090 l Kerb weight 6510 kg Length approx. 11 m Width approx. 3 m Depth approx. 1.5 m
Dough kneading machine W&P DK 250 with 2 boilers -Double cone kneader type DK 250 -for max. 400 kg dough or 250 kg flour -with base plate
Double pump for Battenfeld SYDFEE-20/140R MNR: R900730346 SYDFEE-20/045R MNR: R900703325
Construction debris / concrete shafts, suitable for Arjes Impactor 250 with quick-release cassette and dust-tight bearing lid - ready for installation - incl. transport frame ! We are happy to take care of the transport for you and build a professional !
Auction-ID: A7-45209-5
Double bench grinder, double grinding machine, pedestal grinder, bench grinder, drill grinding machine -Grinding disc: max. Ø 200 x 30 mm -Speed: 2800 rpm -Motor power: 0.74 kW -Operating voltage: 380 volts
-PREPARATION AND PRODUCTION OF PRODUCTS -TRADE AND SALE OF PRODUCTS (NEW AND USED) -THE USE OF A COMPANY (JE AFTER AVAILABILITY)
Service station - Hoftankstelle - Diesel filling station with 5,000 litres capacity, brand new, according to DIN 6616/D, above ground, double-walled, incl. test certificate. The container has two saddle feet, a manhole with dome lid and is fitted with the following fittings Equipped: 1 filling tube with TW-cap (filling cap) and immersion pipe, 1 bearing pipe with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand-new limit sensor with type-approval (AIII), 1 conductor and 1 spare sleeve for extraction purposes, 1 optical leak detector with type approval and leakage liquid. The container is primed on the outside - on untreated sheets. L = approx. 2.80 m - D = 1.60 m - weight approx. 1.5 to. - ex works, freely charged - We recommend: Above containers sandblasting from the outside, prime and completely repaint - dark grey / RAL hue. ...
Double tool holder, double tool holder, double tool holder for turning tools -Size: 120 x 120 mm -Schuck holder: 33 x 49 mm -Bore: Ø 25 mm -Resses: Ø 80 mm -Weight: 5.9 kg
Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Double grinding machine: Type ES200 PW -Grinding discs: max. Ø 230 mm -Motor: Power 0.55 kW -Speed: 2800 rpm -Voltage: 380 V -Dimensions: 510/320/H1230 mm -Weight: 54 kg
maximum number of results exceeded
please refine your search
10 € 
