double column machining used for sale

62.5 m, 8/6/8 mm, height 1.83 m Double bar mat fence complete set including post and fastening material retaining plates Fence elements: 1830 mm high and 2,500 mm long Posts for concreting: 2400 mm Number of fence elements: 25 pieces Number of posts: 26 pieces Double rod mats Material (RAL) Galvanized according to DIN EN 10244-2 and powder-coated Fence Spikes 30mm Mesh size 50mm x 200mm Mat width 2510mm Fence post with clamp Material: Hot-dip galvanized, powder-coated according to DIN EN ISO 1461 and RAL 7016 Material: Post cap: Plastic Material Accessories Stainless Steel Post profile (mm) 60 x 40 x 2 Fence fastening Stainless steel rivet nuts already integrated into the post Screws for Clamps Stainless Steel Screws M8 Accessories (included) Pre-assembled plastic fastening attachments incl. rivet nuts, aluminium clamping tabs, fence screws M8 x 40, post caps  ...

62.5 running metres, 8/6/8 mm, height 1.63 m Double bar mat fence complete set including post and fastening material retaining plates Fence elements: 1630 mm high and 2,500 mm long Posts for concreting: 2200 mm Number of fence elements: 25 pieces Number of posts: 26 pieces Double rod mats Material (RAL) Galvanized according to DIN EN 10244-2 and powder-coated Fence Spikes 30mm Mesh size 50mm x 200mm Mat width 2510mm Fence post with clamp Material: Hot-dip galvanized, powder-coated according to DIN EN ISO 1461 and RAL 7016 Material: Post cap: Plastic Material Accessories Stainless Steel Post profile (mm) 60 x 40 x 2 Fence fastening Stainless steel rivet nuts already integrated into the post Screws for Clamps Stainless Steel Screws M8 Accessories (included) Pre-assembled plastic fastening attachments incl. rivet nuts, aluminium clamping tabs, fence screws M8 x 4 ...

75 running metres, 6/5/6 mm, height 1.43 m Double bar mat fence complete set including post and fastening material retaining plates Fence elements: 1430 mm high and 2,500 mm long Posts for concreting: 2000 mm Number of fence elements: 30 pieces Number of posts: 31 pieces Double rod mats Material (RAL) Galvanized according to DIN EN 10244-2 and powder-coated Fence Spikes 30mm Mesh size 50mm x 200mm Mat width 2510mm Fence post with clamp Material: Hot-dip galvanized, powder-coated according to DIN EN ISO 1461 and RAL 7016 Material: Post cap: Plastic Material Accessories Stainless Steel Post profile (mm) 60 x 40 x 2 Fence fastening Stainless steel rivet nuts already integrated into the post Screws for Clamps Stainless Steel Screws M8 Accessories (included) Pre-assembled plastic fastening attachments incl. rivet nuts, aluminium clamping tabs, fence screws M8 x 40, ...

62.5 m, 8/6/8 mm, height 1.83 m Double bar mat fence complete set including post and fastening material retaining plates Fence elements: 1830 mm high and 2,500 mm long Posts for concreting: 2400 mm Number of fence elements: 25 pieces Number of posts: 26 pieces Double rod mats Material (RAL) Galvanized according to DIN EN 10244-2 and powder-coated Fence Spikes 30mm Mesh size 50mm x 200mm Mat width 2510mm Fence post with clamp Material: Hot-dip galvanized, powder-coated according to DIN EN ISO 1461 and RAL 7016 Material: Post cap: Plastic Material Accessories Stainless Steel Post profile (mm) 60 x 40 x 2 Fence fastening Stainless steel rivet nuts already integrated into the post Screws for Clamps Stainless Steel Screws M8 Accessories (included) Pre-assembled plastic fastening attachments incl. rivet nuts, aluminium clamping tabs, fence screws M8 x 40, post caps  ...

62.5 running metres, 8/6/8 mm Height: 1.43 m Double bar mat fence complete set including post and fastening material retaining plates Fence elements: 1430 mm high and 2,500 mm long Posts for concreting: 2000 mm Number of fence elements: 25 pieces Number of posts: 26 pieces Double rod mats Material (RAL) Galvanized according to DIN EN 10244-2 and powder-coated Fence Spikes 30mm Mesh size 50mm x 200mm Mat width 2510mm Fence post with clamp Material: Hot-dip galvanized, powder-coated according to DIN EN ISO 1461 and RAL 7016 Material: Post cap: Plastic Material Accessories Stainless Steel Post profile (mm) 60 x 40 x 2 Fence fastening Stainless steel rivet nuts already integrated into the post Screws for Clamps Stainless Steel Screws M8 Accessories (included) Pre-assembled plastic fastening attachments incl. rivet nuts, aluminium clamping tabs, fence screws M8 x 4 ...

75 running metres, 6/5/6 mm, height 2.03 m Double bar mat fence complete set including post and fastening material retaining plates Fence elements: 2,030 mm high and 2,500 mm long Posts for concreting: 2,600 mm Number of fence elements: 30 pieces Number of posts: 31 pieces Double rod mats Material (RAL) Galvanized according to DIN EN 10244-2 and powder-coated Fence Spikes 30mm Mesh size 50mm x 200mm Mat width 2510mm Fence post with clamp Material: Hot-dip galvanized, powder-coated according to DIN EN ISO 1461 and RAL 7016 Material: Post cap: Plastic Material Accessories Stainless Steel Post profile (mm) 60 x 40 x 2 Fence fastening Stainless steel rivet nuts already integrated into the post Screws for Clamps Stainless Steel Screws M8 Accessories (included) Pre-assembled plastic fastening attachments incl. rivet nuts, aluminium clamping tabs, fence screws M8 x 4 ...

62.5 running metres, 8/6/8 mm, height 2.03 m Double bar mat fence complete set including post and fastening material retaining plates Fence elements: 2,030 mm high and 2,500 mm long Posts for concreting: 2,600 mm Number of fence elements: 25 pieces Number of posts: 26 pieces Double rod mats Material (RAL) Galvanized according to DIN EN 10244-2 and powder-coated Fence Spikes 30mm Mesh size 50mm x 200mm Mat width 2510mm Fence post with clamp Material: Hot-dip galvanized, powder-coated according to DIN EN ISO 1461 and RAL 7016 Material: Post cap: Plastic Material Accessories Stainless Steel Post profile (mm) 60 x 40 x 2 Fence fastening Stainless steel rivet nuts already integrated into the post Screws for Clamps Stainless Steel Screws M8 Accessories (included) Pre-assembled plastic fastening attachments incl. rivet nuts, aluminium clamping tabs, fence screws M8 x ...

250 running metres, 8/6/8 mm thickness, height 1.83 m Double bar mat fence complete set including posts and Clamp plate fastening material Fence elements: 1830 mm high and 2,500 mm long Posts for concreting: 2400 mm Number of fence elements: 100 pieces Number of posts: 101 pieces Total weight: 2200 kg Double rod mats material: Galvanized according to DIN EN 10244-2 and RAL 7016 powder-coated according to 10245-4 Fence tips: 30mm Mesh size: 50mm x 200mm Mat width: 2510mm Fence post material: Hot-dip galvanized according to DIN EN 10244-2 and RAL 7016 powder-coated according to EN10245-4 Post cap material: plastic Material accessories: stainless steel Post profile: 60 x 40 x 1.5mm Pre-assembled fastening attachments made of plastic incl. rivet nuts, clamping plates made of stainless steel, fence screws M8 x 40 stainless steel, Post caps without protrusion Location: Indust ...

Double length washbasin from the Progetto 46 series, made of white ceramic. The sink has an integrated washbasin and tap hole. Note: The sink has damage at the back. This damage is visible in the images. Taps, siphons, drain fittings and mounting material are not included, unless otherwise stated or visibly present. Product is auctioned in the condition in which it is (as-is). Auction-ID: A1-49250-49

Industrial polisher on a base, 1.8 kW motor, equipped with a double reel, ideal for finishing metal parts. Three-phase 400 V motor, speed 1400 rpm, supplied with protective housings. Auction-ID: A3-46161-39040

1x - Disegno Ceramica double ceramic furniture washbasin from the Qubo Square series. Made of white ceramic with two integrated washbasins. Suitable for mounting on a bathroom furniture. The washbasin offers two separate user seats. Equipped with overflow openings. Excluding taps, siphons, drain plugs and mounting material, unless present. Delivery in accordance with existing content. Product is auctioned in the condition in which it is (as-is). Auction-ID: A1-49250-45

The products have not been tested for functionality. Therefore, there is a possibility that individual items may not work. The products may have scratches, dents, incomplete, or general signs of use. Visit us on the day of the inspection to get an accurate picture of the condition and reason for return. Shipping is also possible. If you would like shipping, please send an email to: info@qplaza.de. For more information, please contact us. Auction-ID: A1-50209-1005

Danish-made Doublet Record cultivator/soil preparer designed for preparing, loosening and levelling agricultural land work. The machine is equipped with several rows of flexible tines for working and aerating the soil, as well as a rear roller with rings for repressing, crumbling of clods and a regular finish of the ground. Robust metal chassis with tractor hitch. Auction-ID: A3-46162-39251

Machine: Double Head Chainsaw Blades: 2x Ø500 mm widia, bore Ø32 mm (reducing) Tilt: 90° / 45° / 22.5° + intermediate positions Blade motors: 2x 2.2 kW (3 HP), 2800 rpm, three-phase 230/400V-50Hz Blade feed: pneumatic with hydraulic adjustment Cutting capacity: min. 305 mm / max. 4-6 m depending on version Heads: 1 fixed + 1 mobile (electronic positioning) Clamping: 2 vertical vices + 3 pneumatic horizontal vices Equipment: 2.5 m roller conveyor, nebulization lubrication, protective boxes, waste collection bin Control: PLC, Membrane Protected Keypad Operating pressure: 7 bar Auction-ID: A1-50215-31

Design sink from Villeroy & Boch from the Thin Big series. Executed in a modern matte white ceramic finish with an extra wide size of 1205 mm. The sink has two tap holes and has no overflow, so a suitable non-lockable drain plug is necessary. Suitable for modern bathroom furniture and wall mounting. Article number: 10411073 \"The item is sold in its current state (As-Is), and as described. The lot description is leading for the content; Any accessories, decoration or other items that are not mentioned in the description are not included in the lot.\" Auction-ID: A1-49250-123

Double cab, start and drive, air conditioning, tow bar, navigation, Bluetooth, electric windows, 3 keys Auction-ID: A1-40314-9

AGICOM recycling machines

METABO Double Bench Grinder Manufacturer METABO Condition untested Location 63843 Niedernberg DE Lot 61

Unused 6x double decorative gate, with black powder coating, tube size 50x50mm, width per part including hinge 1830mm, total width double gate 3670mm, height 1800-2300mm Auction-ID: A1-47445-42

Unused 6x double decorative gate, with black powder coating, tube size 50x50mm, width per part including hinge 2170mm, total width double gate 4350mm, height 1800-2300mm Auction-ID: A1-47445-41

2 toilets; 2 sinks; ventilation grille; ventilation unit; light; toilet paper holder holder; lockable; 220v; drainage; forklift slots; crane hooks; 5891 Auction-ID: A1-50092-47

Please note, the first 3 photos are standard photos -> the actual package can be seen in the last photo(s). Auction-ID: A1-48372-18

Unused 6x double decorative gate, with black powder coating, tube size 50x50mm, width per part including hinge 2980mm, total width double gate 5960mm, height 1800-2300mm Auction-ID: A1-47445-40

Eima Sliding Table Saw Type 122 Cutting width min/max 210-2565 mm Cutting depth of cutting 2500 mm Maximum blade diameter 400 mm Cutting height ~100mm Tilting cutting unit 90° – 45° 2×4.4kw motor Total power requirement 10kw Electronic Cutting Width Eats Technical documentation and CE certificate Net price

Equipped with lower and upper clamping Auction-ID: A1-49785-49

This HBM double LED construction lamp offers optimal visibility with two 50W LED lamps and a light output of 2 x 4,700 lumens, even in the darkest conditions. Thanks to the neutral 5000K color temperature, you can enjoy bright and natural light, ideal for precision work. The included tripod provides stability and flexibility, so you can easily set the lamp to the right height and angle. In addition, with its IP65 rating, the lamp is resistant to dust and water, perfect for harsh working conditions. Auction-ID: A1-40898-229

Clextral extruder, Type: Evolum EV032 M, Extruder: 40D, Barrel length: 10 x 128 mm, Stroke length: 1420 mm, Water: 4.5 - 5.5 Bar, Compressed air: 6 Bar, Steam injection: 2 - 6 Bar, Power: 3 x 400V, 50Hz, 83kW, Dimensions: 4475 x 1200 x 2100 mm, Weight: 1905 kg, Only 80 working hours!, Clextral water pump, Type: CLX DKM, Flow: 6 - 42 l/h, Pressure: max 10 Bar, Reservoir: 7.5 litre, Power: 0.55 kW, Dimensions: 1265 x 350 x 700 mm, Clextral / Prominent oil pump, Type: GMXA1604, Flow: 0.3 - 2.5 l/h, Pressure: max 10 Bar, Reservoir: 10 litre, Dimensions: 900 x 700 x 1150 mm, Clextral High Moisture Extrusion Cooking die, HMEC type: 2 x 800 mm length, Material: CLX202, Internal section: 60 x 8 mm, Dimensions: 1900 x 700 x 1200 mm, TLV steam kit, Type: 2/10 TLV, Serial number: SV148, Steam flow: 2 - 10 kg/h, Steam pressure: 6 - 10 Bar, Maximum pressure: 10 Bar, Steam inlet: DN15, PN16, Steam out ...

Calibre: 25 - 85 mm, Clips: E200 to E240, Stuffing horn: 28 mm, Compressed air: 6 Bar, 5.7 Nl, Power: 230VAC, 50Hz, 0.3kW, Dimensions: 1250 x 700 x 1800 mm, Weight: 100 kg

Working width 180 - 3200 mm, electronic setting Sieb & Meyer Fixed side at the left Chain transport, 80 mm wide Infeed for panels of about 1 m. Top pressure by driven belts Max. workpiece thickness: 80 mm Feedspeed 7 - 35 m/min, motor 2,2 kW Pop-up dogs every 1m10 Equipment left / right: 1 st post Front: 1+1 Jump scorer, motor 1,5 kW, 100 Hz, joined to 1+1 Hogger, motor 3 / 4,4 kW, 50/100 Hz Rear: 1+1 Jump milling, tilting, motor 1,5 kW, 100 Hz 2nd post Front: 1+1 Jump milling, tilting, motor 1,5 kW, 100 Hz Rear: 1+1 Fixed milling, tilting, motor 2,2/3,3 kW, 50/100 Hz 3th post Front: 1+0 Jump milling, tilting, motor 2,2/3,3 kW, 50/100 Hz Rear: 1+1 Jump milling, tilting, motor 1,5 kW, 100 Hz All units with horizontal/vertical adjustment and Siko read-out Outfeed chain approx. 80 cm length Sound and safety enclosures

Workpiece sizes: Length 180 - 2500 mm, width 150 - 800 mm, thickness 12 - 40 mm Fixed side at the left, motorised width adjustment of the right side Working height/ transport height: 920 mm Workpiecetransport with belts, infeed belts can lift up Variable feed speed Each side has got 5 glue injectors and 8 dowel inserters (Type 34) Doweldiameter: 8 mm, dowellength 30 mm, dowelprojection 7-14 mm, dowelcenters min. 32 mm, max. 736 mm Each side with dowel hopper feed with shaker and separators Controll mirror Glue pump 1:1 Glue injection controlls type ELC

FORD TRANSIT CUSTOM L2 AUTOMATIC LIGHT FREIGHT 6P DOUBLE CAB PLENTY OF OPTIONS: DOUBLE SLIDING DOOR L2 MODEL ELECTRIC FOLDING MIRRORS AIR CONDITIONING CRUISCONTROL SEAT HEATING 220V PLUG TOWBAR PDC CAMERA GPS ... Auction-ID: A3-46164-16003

The chassis is based on a torsion axle from a renowned manufacturer and is equipped with independent torsion suspension. Tyres in size 155/70 R13 are used. The trailer has a tilting V-drawbar, which provides excellent stability while driving. The base is made up of curved profiles of galvanized sheet steel that are bolted together. Auction-ID: A3-46124-17637

Payload: 930 KG Nissan NV300 1.6 Diesel EURO 6b 72,000 Original Kilometres, Verifiable with CARPASS Light Cargo Double Cab 6 Seats Air conditioning Radio bluetooth / USB / AUX Electric Windows Power exterior mirrors Central locking Cup holder Auction-ID: A3-46124-5020

- Volkswagen Transporter T5 double cab with flatbed - Registration date: 12/2014 - Chassis number (VIN): WV1ZZZ7JZFX014794 - 2.0-litre diesel engine, 140 hp / 103 kW - 6-speed manual transmission - Mileage: 318,250 km - Wheelbase: 3,400 mm - Double cab with rear bench seat - Air conditioning - Comfort Package Plus 1 - Electrical Package 1 - Electric windows - Exterior mirrors electrically adjustable and heated - Radio RCD 210 - Passenger double bench seat with armrest - Trailer hitch - Spare wheel - Flatbed with aluminium side walls - Side walls clad in wood on the inside - Transport bar on the loading area - Complete steel winter wheels on the vehicle - 1 vehicle key available - Inspections according to the manufacturer's maintenance plan every 40,000 km - Timing belt change 11/2020 at 200,000 km - HU/AU due 02/2027 - Signs of wear and tear due to age and mileage ...

Iveco Eurocargo 90E18 4x2 truck with double cab, built in 2009. Equipped with 7 seats, open cargo box with folding side and rear boards and separate closed material box behind the cabin. Equipped with a 3,920 cc diesel engine with an output of 134 kW (approx. 182 hp), manual transmission and Euro 5 emission class. Odometer reading: 203,113 km and 5,075 hours of operation. Own weight 5,080 kg, GVW 9,000 kg and payload approximately 3,920 kg. Wheelbase 4,815 mm and total length 8,640 mm. Belgian vehicle documents available. Inspection valid until 12/06/2026. Vehicle starts, drives and brakes properly. Auction-ID: A3-46124-22053

Volkswagen Crafter 2.0 TDI – 140 hp – double cab / workshop vehicle Registration date: 02/2016 Mileage: 243,634 km Engine: 2.0 liter TDI diesel Power: 103 kW / 140 hp Transmission: 6-speed manual transmission Wheelbase: 4,325 mm Chassis number: WV1ZZZ2EZG6023197 Color: Orange Former emergency vehicle in the field of asphalt technology Double cab with double passenger bench seat incl. armrest 3-seater bench seat in the 2nd row of seats Partition to the cargo area behind the 2nd row of seats Semi-automatic air conditioning Electric Air Auxiliary Heater Electric windows Exterior mirrors electrically adjustable and heated Electric closing aid for sliding door on the right Radio RSD 2000 with Bluetooth interface Front and rear parking sensors Step at the rear Reinforced rear shock absorbers 2 flash bars on the roof Spare wheel Steel winter complete wheels mounted  ...

- VW Crafter panel van / double cab with high roof - Registration date: 10/2016 - Chassis number: WV1ZZZ2EZG6057049 - 2.0-litre diesel engine, 140 hp / 103 kW - 6-speed manual transmission - Wheelbase: 3,665 mm - Mileage: 251,229 km - Semi-automatic air conditioning - Electric windows - Electrically adjustable and heated exterior mirrors - Electric air auxiliary heater - Electric closing aid on the sliding door on the right - Radio RSD 2000 with Bluetooth interface - Passenger double bench seat with armrest - 3-seater bench seat in the 2nd row of seats - Partition wall to the cargo area behind the 2nd row of seats - Front and rear parking sensors - Step at the rear - Reinforced rear shock absorbers - Lightning bars on the roof - Spare wheel available - Complete steel winter wheels on the vehicle - Cargo area with interior lining, lashing rails and side installations -  ...

Specifications: Quantity: 2 complete wheels Application: double wheel set / extra rear wheels for tractor Tire brand: Kleber Tyre Size: 16.9 R38 Agricultural profile Both tyres mounted on steel rim Includes mounting hooks/clamps Coming from a Fiat tractor Used condition Rims show surface rust Tyres show signs of wear; profile still looks decent in the photos Compatibility with specific tractor must be checked by the buyer himself Auction-ID: A3-46125-10239

Manufacturer: Isuzu Model: D-Max Double Cab Registration date: 30.07.2012 Engine: 3.0 L Turbodiesel Intercooler Power: 100 kW (136 hp) Fuel: Diesel Transmission: Manual Drive: All-wheel drive (4WD) TÜV 07/2026 Permissible total weight: 3,500 kg Color: Silver Metallic Double cabin with 5 seats Hardtop on the loading area Trailer hitch available Loading area with plastic tub Scratches due to use and age as well as minor dents present Underbody with superficial rust attachments Hardtop with slight traces of corrosion Interior with usual signs of wear Robust work and utility vehicle Ideal for forestry, agriculture, construction or leisure Sale in used condition Mileage 235000 Technical function and completeness have not been checked Auction-ID: A1-49588-6065

Mitsubishi L200 Double Cab 2.4 DI-D 4x4 – 181 hp – 2017 – Crashed Mitsubishi L200 Double Cab 4x4, equipped with the 2,442 cc 2.4 DI-D diesel engine developing 133 kW / 181 hp, combined with a 6-speed manual gearbox. Features: Brand: Mitsubishi Model: L200 Version: Double Cab 4x4 First registered: 10/2017 Mileage: 107,624 km Fuel: Diesel Displacement: 2,442 cc Power: 133 kW / 181 hp Transmission: 6-speed manual Drivetrain: 4x4 Environmental standard: Euro 6b Color: Black WINE: MMCJJKL20HH005576 Visible equipment: automatic climate control, multimedia system with central display/navigation, multifunction steering wheel, cruise control, LDW lane departure warning system, keyless start, leather upholstery, aluminium wheels, side steps, chrome front bull bar, hitch and Alpha hard-top on the bed. The vehicle is equipped with a selectable 4x4 transmission with 2H, 4H, 4HLc and 4LLc mo ...

Professionally converted vehicle Automatic gearbox Paddle shifters on the steering wheel Front LED light bar Additional LED strobes Webasto sunroof Roof fan Raised floor Rear ramp/platform Storage module with 2 drawers Adjustable rear seats on rails USB Connectors 12V socket Automatic air conditioning Bluetooth radio Multifunction handlebar Cruise control / speed limiter Lane Keeping Assist Parking sensors Hill Assist ESP Electric windows Electrically adjustable exterior mirrors Central locking Height-adjustable handlebars Multiple storage compartments LED Daytime Running Lights Auction-ID: A3-46124-5040

adjustment drive of the grinding spind.slide:0,0025 - 0,05 mm total power requirement:100 kW adjustment of grinding head slide:150 mm weight of the machine ca.:17 t grinding spindle drive:2 x 37 kW grinding width:30-150 mm peripheral speed:34 m/sec workpiece speeds:60 - 300 mm/Sek. grinding height:70 mm grinding wheel diameter:750 mm grinding tools:750 x 75 x 350 mm grinding wheel turning speeds:870 U/Min. max. workpiece diameter:250 mm

grinding height:-- mm grinding width:220 mm grinding wheel diameter:762 mm total power requirement:90 kW weight of the machine ca.:13 t grinding spindle 1 drive::37 kW grinding spindle 2 drive::37 kW Grinding machine for pre-grinding the connecting rod With 2 replacement spindle motors

total power requirement:2,2 kW dimensions of the machine ca.:2,15 x 1,47 x 2,24 m JAESPA V 380 DG /DGHS Vertical Mitre Band Saw This machine is a vertical double-mitre band saw designed for professional use in the metal, steel and mechanical engineering industries. In addition to straight 90° cuts, this band saw also enables mitre cuts to the left and right. The mitre range is up to 60° on one side and up to 45° on the other. This makes the machine particularly suitable for cutting profiles, tubes and solid material. The cutting speed and hydraulic saw feed can be adjusted to suit the material being cut. The machine is equipped with a coolant system. Technical specifications: ·Saw motor: 2.2 kW ·Hydraulic pump: 0.37 kW ·Coolant pump: 0.18 kW ·Belt speed: 17?100 m/min ·Saw blade dimensions: 4,250 × 34 × 1.1 mm ·Workpiece support height: 1,000 mm ·Coolant tank: 50 litres Robust ...

Travel X/Y/Z: 740mm/500mm/480mm, tool holder: SK40, tool positions: 22, max. spindle speed: 4700rpm, control: Heidenhain TNC 426 PA. Machine dimensions: approx. 3000mm/2400mm/2700mm, weight: approx. 5000kg. The machine was used exclusively for machining plastic and operated without metalworking fluid. The coolant system must be repaired. The backup battery of the control is depleted and must be replaced. Inspection possible by arrangement.

Ref. -No.: 10201 Manufacturer: AXA Year of construction: 2007 Type of control: CNC Control: Siemens 840D Storage location: Halberstadt Country of origin: Deutschland X-Travel: 5000 mm Y-Travel: 600 mm Z-Travel: 800 mm Machine length: 9400 mm Machine width: 3500 mm Machine Height: 3300 mm Table Dimensions (Lengthxwidth): 6325 x 1050 mm Swivelling: +/-90 ° Numbers Of Tools In Magazin: 120 Turning Speeds: 30-9000 RPM Tool changer: SK 50 Drive Capacity - Spindle Motor: 45 kW Weight Of The Machine Ca.: 23 t Tool change time: 6 s Vertical working height: 0-740 mm Working height horizontal: 250-1050 mm Space requirement (LxWxH): 11000 x 5090 x 3300 mm Feed rate: X/Y/Z: 40 m / min

Inv. Num. : 9068 Type: VHC 3 XTS Producer: AXA Created: 2016 Parameters: Control system: HEIDENHAIN iTNC 530 Maximum vertical spindle speed: 10000 1/min X-axis travel: 3000 mm Y-axis travel: 900 mm Z-axis travel: 950 mm Cone: HSK – A 63 Number of all tools: 36 pieces Equipment: Chip conveyor NC rotary table AXA RTA 2-300 (diameter 300 mm) 3D Measuring Probe RMP60 Handwheel Hand Dishwashing Gun

X-axis: 635mm, y-axis: 510mm, z-axis: 460mm, clamping surface dimensions: 790x560mm, max. spindle speed: 8000rpm, control: Heidenhain TNC 620, connected load: 17kVA, spindle motor drive power: 8.4kW at 100% duty cycle, length: 3290mm, width: 2920mm, height: 2650mm, weight: 3.8t, operating hours: 27,125h, spindle hours: 8668h. Equipment: SK 40 DIN69871 tool holder, 20-position tool changer, coolant system 3.7bar, DMG TS 649 electronic touch probe, Heidenhain TT140 tool measurement system, Lehmann FA-510L-485 A-axis indexing unit s/n A756, four-jaw chuck, Vischer & Bolli zero-point clamping system, chip conveyor, chip cart, workbench with hand tools, milling and drilling tools, platform trolley for the indexing unit, tools and accessories, various tool holders approx. 36 pieces, various accessories, spare parts and documentation. An on-site inspection is possible.

travelling column machining center, year 2005. Used machine. More info & price on IndustrialBuyer.

travelling column machining center, year 2000. Used machine. More info & price on IndustrialBuyer.