134,310 used machines on RESALE, but how to find them? Machine Search
16 A plug Grinding Wheels D 9 cm Unaudited Length 0.3 m Width 0.4 m Height 0.3 m
16 A plug Solid carbide grinding wheel Steel Grinding Wheel 1 support holder is missing Work Lamp Length 0.3 m Width 0.46 m Height 1.10 m
A glass processing plant with several production lines is available. 1) Cutting line with automatic breaking system 2) Cutting line with automatic breaking system 3) Glass scrap disposal line 4) Glass scrap disposal line 5) Double-sided glass grinding and washing machine Scheppach 2500 C4/0E with washing machine T 4516 133 6) Double-sided glass grinding and washing machine Scheppach 2500 C4/0E with washing machine T 4516 133 and portal drilling machine, max. glass dimensions: 2600x2200mm 7) Control system 8) Water supply system for washing machines with circulation water treatment, sludge dewatering, chemical supply, and additional components 9) Horizontal tempering furnace Tamglass ProE-2442-ABS-20 10) Domino D550+ 10 (55W and 10mm scanner). A large number of spare parts, complete spare robots, and numerous glass racks in various formats are also available for purchase. Complete documen ...
0: 3350 mm Working height: bei 90° = 180 mm 0: 45°/90°/45° 0 Cutting height at 45°: 140 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
0: 355 - 4010 mm Working height: bei 90° = 315 mm 0: 45°/90°/45° 0 weight: 2050 kg Cutting height at 45°: 230 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
0: 355 - 4010 mm Working height: bei 90° = 290 mm 0: 45°/90°/45° 0 weight: 1800 kg Cutting height at 45°: 210 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
0.5 KW 380 V 16 A Discs D 200 mm Swivelling sanding pads Length 0.30 m Width 0.78 m Height 1.10 m Weight 40 kg Color: Green
1.2 HP 0.9 KW 380 V 16 A 2900 rpm Discs D 200 mm Swivelling sanding pads Coolant Setup Length 0.52 m Width 0.90 m Height 1.20 m Color: Green Weight 50 kg
A CNC precision grinding machine Peter Wolters with two opposing grinding wheels and a workpiece/carrier disc system for simultaneous machining of both workpiece sides is available. Carrier wheel outer diameter: 1050mm, carrier wheel ring diameter: 290mm, max. workpiece height: 100mm, machine dimensions X/Y/Z: approx. 2350mm/3400mm/2400mm, weight: approx. 7000kg, control: Siemens Simatic S7-400 with WinCC visualization, operating hours: approx. 7000h. Including twin loader, buffer table, CBN fine grinding wheels, dressing wheels, ultra-fine measuring system, temperature monitoring, remote maintenance system, wear compensation and alignment system. Without filter system and cooling system. Documentation available. An on-site inspection is possible.
2-Shaft Mixer; with tilt function; Lining and kneading wings are made of stainless steel, 2-Z-shaped kneading blades; Length 2.90 m, width 1.30 m, height 2.10 m, trough size 64 x 69 x 55 mm Engine type ZG4 KMR 132 S4; Motor power: 7.5 kW; Motor voltage: 380/ 660 V; Rated speed motor: 1435 ... 1480 rpm; Output speed (gearbox): 160 rpm. The plant was shut down in 2024. more photos on request
For sale Doosan Multi Task CNC turning center type MX2100LST with a Fanuc 31i-A controller. This Doosan MX2100LST is a high-quality, multifunctional 9-axis CNC turning/milling center. The machine combines the functions of a CNC turning and machining centre in a single clamping (turning-milling). Capacity & Working Area Maximum turning diameter: 540 mm Maximum turning length: 1,540 mm Maximum diameter over bed: 750 mm Maximum diameter over thrust axis: 650 mm Spindles (main and counter spindle) Both spindles offer identical performance and thus enable the symmetrical transfer and machining of workpieces: Lift Plate Size: 8 inches (optional 10 inches) Maximum speed: 5,000 rpm Spindle motor power: 22 kW Spindle bore / Maximum rod diameter: 65 mm. C-axis resolution: 0.001 degrees (on both spindles) Milling spindle (B-axis head) The upper processing head is a fully controll ...
An Elumatec double mitre saw for aluminium and plastic profiles, including E200 positioning unit, is available. Saw head swivel: 45°, saw blade diameter: 380mm, speed: 2800rpm, max. cutting capacity: 195mm/120mm, min. cutting length: 520mm, weight: approx. 1000kg. Documentation available. An on-site inspection is possible.
Gildemeister GMX 250S Linear Turning/Milling Center CNC Cover Maho DMG Hersteller [manufacturer]: Gildemeister Deckel Maho DMG Type [ type]: GMX 250S Linear Control [control unit]: Heidenhain Plus IT 3D CNC Pliot 4290 plus it Baujahr[construction year]: 12/2008 the premier class of turning and milling! Important key data of the GMX 250S Linear: • 7 Axis Turn-Mill Center • Main and counter spindle • B-axis up to 240° • Milling spindle up to 12,000 rpm • Tool magazine up to 80 places • Siemens 840D or Heidenhain control • Linear actuators for high dynamics and accuracy • Machining diameter approx. 520–640 mm • Turning length up to approx. 1,185 mm Typical equipment: • Y-axis • Powered tools • Bar feeder • High-pressure cooling • Probes • Chip conveyor • HSK-A63 milling spindle • Sub-spindle for complete machinin ...
Machine Specifications - Type: Double cone mixer - Capacity: approximately 1,000 kg - Control unit: circa 2005 Condition and Equipment - New paintwork - New storage blocks for mixing containers including bearings - Supplied without CE marking and documentation Find more here - .ucymachines/ Contact us at - sales@ucymachines
Kistler NC joining module with double station/spindle unit Kistler NCFH 60 servo press with feed carriage & spindle station The Kistler NCFH 60 NC joining module is integrated into an industrial double station/spindle unit for automated series production (e.g. friction welding or precision pressing). The system is characterized by the highest precision, integrated force-displacement monitoring (piezoelectric sensors) and an extremely robust design for continuous industrial loads. Precise press-fitting and joining: Ideal for high-precision assembly processes in the automotive industry, electrical manufacturing or general mechanical engineering. Integrated quality assurance (force-displacement monitoring): Thanks to the built-in piezoelectric sensors, the module measures the exact tensile and compressive forces during the pressing process depending on the position. ...
Cutting length min./max.: 370mm/5100mm, max. cutting width: 375mm, max. cutting height: 150mm, saw blade diameter: 500mm, saw blade bore: 30mm, swivel range: 45°-90°. Machine dimensions X/Y/Z: approx. 6100mm/1450mm/1450mm, weight: approx. 700kg. An on-site inspection is possible.
Double corner round slotting machine Tränklein EK-D 100; cleaned and tested; 2x Knife 16mm (other sizes on request); Insertion height max.100mm; optical sensor; Foot release. Double corner rounding machine Tränklein EK-D 100; cleaned and checked; 2x knife 16mm (other diameters on request); max.pile hight 100mm; optical sensor; foot switch.
Offer 21478 Technical data: - Operation via handheld remote control with cable - Total load capacity approx. 2000 kg - Load capacity per table approx. 1000 kg - Platform made of aluminum with div threaded holes - Platform size approx. 2800 x 1800 mm - min. Lift table height approx. 280 mm - max. Lift table height approx. 1100 mm - Stroke approx. 820 mm - Hydr. drive 400 V / 1.1 kW each - Separate control cabinet - Separate hydraulic power unit with wall mounting rack - Space requirement approx. W 2850 x D 1850 x H 280 mm - Weight approx. 800 kg
double grinder, double grinder, column grinder, column grinder, drill grinder -Double grinder with: water cooling -Grinding disc: max. Ø 450 x 63 mm -Speed: 950 rpm -Engine power: 3.3 kW -Operating voltage: 380 volts -Quantity: 1 pieces available -Price: per piece -Dimensions: 370/370/H1090 mm -Weight: 404 kg
An old but fully functional IMA double-end profiler is available. Working width: 2000mm, max. cutting height: 35mm, machine dimensions X/Y/Z: approx. 4000mm/6000mm/3000mm, weight: approx. 3000kg. Documentation available. An on-site inspection is possible.
Komptech Crambo 5200 Facilities Crambo 5200 D direct T4f/StufeV EU Declaration of Conformity Engine Oil Drain C13/C18 Trailer Machine documentation Connect! VT Set Sickle Tooth Universal roller Cassette Bio VT Set of Bio Teeth Organic tooth holder unequipped Strainer basket 180 mm Bio Standard discharge belt Discharge belt 6.5 m Overbelt magnet Trailer Trailer drive-up device E-air compressor for supply trailer Slip-on shoe 50mm incl. safety device Wireless remote control Central lubrication HyDrive 2.0 - C13B T4f/StufeV Availability: by arrangement Warranty: The machine will be sold in the condition existing at the time of delivery. The seller assumes no liability for defects. We reserve the right to sell in advance, make changes and repairs.
Komptech Crambo 5200 # 447202 Facilities Crambo 5200 D direct T4f/StufeV EU Declaration of Conformity Engine Oil Drain C13/C18 Trailer Machine documentation Connect! VT Set Sickle Tooth Universal roller Cassette Bio VT Set of Bio Teeth Organic tooth holder unequipped Strainer basket 180 mm Bio Standard discharge belt Discharge belt 6.5 m Overbelt magnet Trailer Trailer drive-up device E-air compressor for supply trailer Slip-on shoe 50mm incl. safety device Wireless remote control Central lubrication HyDrive 2.0 - C13B T4f/StufeV Condition: Serviced, rollers hardened Availability: by arrangement Warranty: The machine will be sold in the condition existing at the time of delivery. The seller assumes no liability for defects. We reserve the right to sell in advance, make changes and repairs.
Komptech Crambo 5200 # 447211 Facilities Crambo 5200 D direct T4f/StufeV EU Declaration of Conformity Engine Oil Drain C13/C18 Trailer Machine documentation Connect! VT Set Sickle Tooth Universal roller Cassette Bio VT Set of Bio Teeth Organic tooth holder unequipped Strainer basket 180 mm Bio Standard discharge belt Discharge belt 6.5 m Overbelt magnet Trailer Trailer drive-up device E-air compressor for supply trailer Slip-on shoe 50mm incl. safety device Wireless remote control Central lubrication HyDrive 2.0 - C13B T4f/StufeV Condition: Serviced, rollers hardened Availability: by arrangement Warranty: The machine will be sold in the condition existing at the time of delivery. The seller assumes no liability for defects. We reserve the right to sell in advance, make changes and repairs.
Komptech Crambo 5200 # 447248 Facilities Crambo 5200 D directT4f/StufeV EU Declaration of Conformity Engine Oil Drain C13/C18 Trailer Machine documentation Connect! VT Set Sickle Tooth Universal roller Cassette Bio VT Set of Bio Teeth Organic tooth holder unequipped Strainer basket 180 mm Bio Standard discharge belt Discharge belt 6.5 m Overbelt magnet Trailer Trailer drive-up device E-air compressor for supply trailer Slip-on shoe 50mm incl. safety device Wireless remote control Central lubrication HyDrive 2.0 - C13B T4f/StufeV Condition: Serviced, rollers hardened Availability: by arrangement Warranty: The machine is stored in the condition existing at the time of handover. sold. The seller assumes no liability for defects. We reserve the right to sell in advance, make changes and repairs.
Komptech Crambo 5200 # 447221 Facilities Crambo 5200 D direct T4f/ StufeV EU Declaration of Conformity Engine Oil Drain C13/C18 Trailer Machine documentation Connect! VT Set Sickle Tooth Universal roller Cassette Bio VT Set of Bio Teeth Organic tooth holder unequipped Strainer basket 180 mm Bio Standard discharge belt Discharge belt 6.5 m Overbelt magnet Trailer Trailer drive-up device E-air compressor for supply trailer Slip-on shoe 50mm incl. safety device Wireless remote control Central lubrication HyDrive 2.0 - C13B T4f/StufeV Condition: Serviced, rollers hardened Availability: by arrangement Warranty: The machine will be sold in the condition existing at the time of delivery. The seller assumes no liability for defects. We reserve the right to sell in advance, make changes and repairs.
Komptech Crambo 6000 e-mobile Facilities Crambo 6000 e-mobile PVG3fach 50Hz 6000 e-mobile / 280KW Connect! Machine documentation Switchgear 6000 IEC Single Connector 9-Pin Extension 9-pin connector VT Set Sickle Tooth Universal roller Cassette Bio VT Set of Bio Teeth Organic tooth holder unequipped Strainer basket 180 mm Bio Discharge belt 6.5 m Overbelt magnet Trailer Documentation Chassis Underride protection extension Trailer+ÜBMA E-air compressor for supply trailer Slip-on shoe 50mm incl. safety device Wireless remote control Central lubrication Auxiliary unit Fire extinguisher Condition: Serviced, rollers hardened Availability: by arrangement Warranty: The machine will be sold in the condition existing at the time of delivery. The seller assumes no liability for defects. We reserve the right to sell in advance, make changes and repairs.
A Haffner double mitre saw with robust construction is available. Saw units: 2, indexing positions: 90°/45°/22.5°, unit inclination: 45°, saw blade diameter: 330mm, motor power: 1.1kW, max. cutting length: 3000mm, max. cutting width: 130mm, max. cutting height: 120mm. An on-site inspection is possible.
diameter range 8-16 mm shaft length under head 25-180 mm max. cut-off length 220 mm output - pieces/min 70
good condition diameter range 10-20 mm shaft length under head 180 mm cutting length 230 mm output - pieces/min 45/50/56/63 press power 160 t plane of stroke 240 mm
Double-end profiler winter Type RYD 6020 Year of construction 2010/6 Working width approx. 2000 mm Working height approx. 10 – 120 mm Feed speed approx. 6 – 36 m/min. 1 unit per side Motor power approx. 5.5 kW each Feed motor approx. 4 kW Motor width adjustment approx. 0.75 kW Connected load 15.1 kW Weight 4000 kg
diameter range 6-12 mm shaft length under head 120 mm max. cut-off length 160 mm output pieces/min 125
diameter range 5,0-10 mm shaft length under head 120 mm max. cutting length 170 mm output- piece/min 130
diameter range 5-10 mm shaft length under head 10-150 mm max. cut-off length 180 mm output pieces/min 100
diameter range 4-9 mm shaft length under head 100 mm cutting length 120 mm output pieces/min 100
diameter range 4-8 mm shaft length under head 8-80 mm max. cut-off length 110 mm output pieces/min 140
diameter range 4-8mm shaft length under head 40mm max. cut-off length 71mm output pieces/min 250 press power 30 t
diameter range 6,35 mm shaft length under head 70 mm cutting length 95 mm output pieces/min 300
diameter range 3-6,5mm shaft length under head 8-75 mm max. cut-off length 100 mm output pieces/min 150
Key data: 500 mm
Max. saw blade diameter: 500 mm Automatic positioning of length and angle (90° or 45°), intermediate mitres adjustable from the front Moving roller conveyor Material support pneumatically folds up Minimum quantity spraying device USB Port Instruction manual Weight: 1400 kg
bushing cut-off diameter range 6 mm cutting length 95 mm shaft length under head 75 mm output - pieces/min 200
diameter range 6 mm shaft length under head 145 mm cutting length 165 mm output - pieces/min 100
diameter range 3-6 mm shaft length under head 35-120 mm max. cutting length 146 mm output- piece/min 90
diameter range 3-6 mm shaft length under head 6-60 mm max. cutting length 75 mm output- piece/min 180
diameter range 3-6 mm shaft length under head 50 mm max. cut-off length 75 mm output - pieces/min 300
diameter range 2-4 mm shaft length under head 100 mm max. cutting length 117 mm output- piece/min 110
diameter range 2-4,76 mm shaft length under head 46 mm max. cut-off length 60 mm output pieces/min 470
diameter range 2-5 mm shaft length under head 25 mm max. cutting length 37 mm output- piece/min 330
diameter range 2-5,2 mm shaft length under head 120 mm cutting length 146 mm output pieces/min 105
bushing cut-off diameter range 5 mm cutting length 50 mm shaft length under head 40 mm output - pieces/min 450
bushing cut-off diameter range 1-4mm shaft length under head 25 mm max. cutting length 32 mm output- piece/min 350
maximum number of results exceeded
please refine your search
