double column machining used for sale

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 0.37 kW -Speed: 2900 rpm -Grinding discs: max. Ø 175 mm -Operating voltage: 380 volts -Dimensions: 420/390/H1150 mm -Weight: 65 kg

Double hydraulic pump, oil pump, gear pump -Shaft mounting: Ø 21.5 mm -Number: 3x hydraulic pumps available -Price: per piece -Dimensions: 270/120/110 mm -Weight: 6.7 kg

Double hydraulic pump, oil pump, gear pump -Shaft diameter: Ø 22.5 mm -Dimensions: 310/120/110 mm -Weight: 9 kg

Specifications: - Grinding wheel diameter approx. 200 mm - Grinding wheel width approx. 25 mm - Grinding wheel bore approx. 51 mm - Disc speed 1450 rpm - Drive 400 V / 0.7 kW - Space requirement approx. W 600 x H 400 x D 350 mm - Weight approx. 30 kg - Console for wall mounting

I sell a double end cutting and milling machine FRIULMAC IDRAMAT, built in 2007. Working width up to 2500mm Configuration left side / fix: 1 + 1 pcs. cutting units top + bottom / 3.0 + 3.0 KW 1 + 1 pcs. groove saw units front + rear with jump Configuration right side / movable: 1 + 1 pcs. cutting units top + bottom / 3.0 + 3.0 KW 1 pcs. special milling unit on top / 5.5 KW Material pressure band with support from above. Special design, also suitable for side dimensioning. Continuous machine. Siemens Simantic control panel. Condition Very good. Available the same.

UNI-KK 0-031-500 Dimensions: Cylinder length: 9.97 m Diameter 2.50 m Total length: 10,80 m Material: Material: Steel Tank above: - with manhole Dom 600 - with 2 crane eyelets - Leak control system with leak connections complete - with ventilation Cylinder: - 2 saddle plates - with Klöpperboden

pdf attached

Double hydraulic pump, oil pump, gear pump -Shaft diameter: Ø 22.5 mm -Dimensions: 300/120/110 mm -Weight: 9 kg

Double hydraulic pump, oil pump, gear pump -Shaft diameter: Ø 22.5 mm -Dimensions: 300/120/110 mm -Weight: 9 kg

Double hydraulic pump, oil pump, gear pump -Shaft diameter: Ø 22.5 mm Price: per piece -Quantity: 2 available -Dimensions: 300/120/110 mm -Weight: 9 kg

Double hydraulic pump, oil pump, gear pump -Shaft mounting: Ø 21.5 mm -Dimensions: 300/120/110 mm -Weight: 9 kg

Double hydraulic pump, oil pump, gear pump -Shaft mounting: Ø 21.5 mm -Dimensions: 300/120/110 mm -Weight: 9 kg

Double hydraulic pump, oil pump, gear pump -Shaft mounting: Ø 21.5 mm -Dimensions: 300/120/110 mm -Weight: 9 kg

Double hydraulic pump, oil pump, gear pump -Shaft mounting: Ø 21.5 mm -Dimensions: 300/120/110 mm -Weight: 9 kg

Double hydraulic pump, oil pump, gear pump -Shaft mounting: Ø 21.5 mm Price: per piece -Quantity: 2 available -Dimensions: 300/120/110 mm -Weight: 7 kg

Used double shaft kneader KÖNIG, type: W160 -In bakery condition- - for 160 kg dough - including 1 tank car - other tank wagons on request Visits and test runs are possible by arrangement.

offer 22556 Specifications: - Saw blade diameter 420 mm - Saw blade bore 30 mm - cutting length 3000 mm - smallest cutting length at 90° + 45° 335 mm - Intersection area see diagram attached - Swivel range inwards manually 90 - 22.5 ° - Tilt range inwards manually 90 - 45 ° - Saw blade speed 2800 rpm - Drive 380 V / 2 x 4000 Watt - Compressed air connection 7 bar - Air consumption per working stroke approx. 64 l - Space requirement approx. W 4500 x H 1950 x D 1600 mm - Weight approx. 1400 kg - with: - Cutting length adjustment with positioning control - Positioning control renewed approx. 2002 by WOLFF - Saw unit swivel and tilt for high and wide profiles, - as well as cut-outs

Transport dimensions approx. 400x400x1200 mm. Auction-ID: A7-45347-632

Auction-ID: A1-45406-43

Thank you for your interest in our used machines, which we can offer you as follows: Model: Double Z kneader with hand tilt Trog dimensions: 350x365x280mm (lxwxh) Net capacity: approx. 35 l total Electrical: 400V 3 ph Dimensions: 1200x800x1650mm (l/w/h) Weight: approx. 350 kg Details: Hand tilting, parts made of stainless steel in contact with the product We offer this machine for sale "as is" to the exclusion of any warranty/claims for defects or representations. ex stock Hess. Lichtenau; Unpacked

Auction-ID: A1-45406-44

Brand: Fiat Model: Doblo • Variant: Estate / Cargo (double cab, 5-seater) • Registration date: 28.10.2016 • Vehicle class: Commercial vehicle / light van • Colour: White • Engine: 1.6 Multijet Diesel • Power: approx. 77 kW (105 hp) • Fuel: Diesel • Transmission: Manual • Drive: Front-wheel drive • Permissible total weight: approx. 2,000 – 2,100 kg • Emission class: probably Euro 5 • Seats: 5 • Sliding door right / left • Glazed side wall in the cargo area • Rear wing doors (double-leaf) • Fabric interior • Power steering • ABS, ESP • Driver's airbag • Passenger airbag • Steel rims • Adjustable exterior mirrors • Radio • Rear bench seat (3 seats) • Interior with signs of wear, see pictures • Body with scratches • No obvious accident damage visible • General condition: used, com ...

Double disc grinding machine

Stock No. 2590k 1 used compounding pelletizing line, throughput up to 1200 kg/h depending on material, consisting of: 1x Grav. Dosing system 5-component SITECOM incl. control 1x Extruder twin screw THEYSOHN type TSK 90 Screws 2x Ø 90 mm – 36 LD synchronization Segment screw and barrel, water / medium cooled Screw speed up to 300 rpm-1 Extruder drive 255 kW-DC 1x side dosing extruder TSD 75 twin screw with drive 3 kW 3x degassing openings 1x melt filter No. 1 type K –HS- Y with sieve 176 mm, incl hydraulic 1x melt pump with drive 22 kW 1x meelt filter No.2 type K-SWE 180 RS back-flush self-cleaning incl. hydraulic 1x strand head with 32 x Ø3.5 mm holes 1x strand cooling pool 620 x 5000 mm 1x string granulator SG 300, drive 11 kW Screen control ResoTec / control cabinet Visit / demonstration at short notice by arrangement. Further compounding lines and access ...

Auction-ID: A1-45411-518

Key data: 50

Extruder 2 corrotating spindles: 50 mm Ø, 40 L/D, brand: ICMA SAN Giorgio, with double degasser. Motor: 57.5 Kw direct current with drive. Material dispenser and thread head (spaghetti), with electrical panel.

Key data: 50

Extruder 2 spindles: 50 mm Ø 12 L/D, motor: 4.5 kw, without electrical panel.

Auction-ID: A1-45411-524

Auction-ID: A1-45411-531

Extruder 2 spindles 18L/D, model: BK-50-93, tapered spindles, brand: Volcano, with motor: 25hp, with variable speed drive. Degasser and dispenser of material and electrical panel.

Balestrini linear milling machine two milling units pneumatic pressure of elements

Table Bain Marie RIEBER BM 115 2/1 B, 220 V, 1,55 Kw Auction-ID: A7-45677-62

Double sink with tap and drain set + base Auction-ID: A7-45677-8

257x131 Auction-ID: A3-43367-5761

Stainless Steel Double Sink with 2 Drains and Backsplash Auction-ID: A7-45677-56

Key data: 65

Extruder 2 corrotating spindles: 65 mm Ø, 30L/D, brand: Maris, model: TM-65 V. Shirt and spindle compatible by segments. Degasser, motor: 90 KW DC, with variable speed. Thread head and 2 spare spindles.

SECOND-HAND CNC DOUBLE SIDED ROUND END TENONER BACCI TSD-E-NC14 - Working length mm. 1200 - Max tenon length 100 mm - Production: 2400 tenons/hour (1200 pieces/hour) - Tool rotation 9,000 rpm - Tenoning units motors (n.2) 8 hp (4hp each) - Touch screen NC control - With CSF loader - Safety net - S/N 800 - CE rules (year 2004)

Double end tenoner Schwabedissen Type: DAa 200 Working width 1000 mm 3 motors per side: Saw 8.3 kW swivel Milling machine 4.5 kW swivel Milling machine 4.5 kW swivel Chain track with cam spacing 380 mm Lower chain projection 500 mm External dimensions 3600 mm x 2340 mm

Stock No. 2680 1x partially overhauled and functionally tested Compounding extruder double screw, co-rotating intermeshing Segmented screws and cylinder barrel (water cooled) Screws 2x 64 mm - 40 L/D Screw speed up to 1200 rpm-1 Drive 482 kW-DC Gearbox Flender safety coupling atutomatik 3x degassing venting ports ( vacuum pump optional for extra charge ) 2x side feeding dosing extruder type ZSFE 50 twin screws with dm 48.5 mm with 4 kW each, speed up to 800 rpm.-1 Control cabinet with Siemens HMI Touch OPTIONAL at extra cost: 1) Screen-pack-changer changer 2) Vacuum pump 3) Pelletizing: ST strand, - WRG waterring or - UWP underwater pelletizing system 4) Granulate classifying sieve 5) gravimetric loss-in-weight blender / dosing system 6) Material conveying 7) Big-bag filling station 8) Start-up by our technicians Visit to our factory in Wuppertal.  ...

6000 l container made of V2A double jacket for sale from location Very good condition, straight from production!

000 l container made of aluminium double jacket For sale from location With agitator Very good condition, straight from production!

Builder: HAAS Model: 700/1500 HDWV-D Motor: CAT C9 300 HP Work Data: W. 6.850 mm x L. 2.530 mm x H. 2.700 mm Operative Data: W. 8.700 mm x L. 2.530 mm x H. 3.200 mm Year: 2011 Hourly Production: 30 t/h Rotor: 2 Pz (TWIN SHAFT) Rotor Data: L. 1.500 mm x D. 700 mm Rotor Tools: 7/6 TOOTH per ROTOR + 4 TOOLS Weight: 19.000 Kg

Machining diameter max: 36 mm Maximum spindle speed: 6300 rpm No. of Spindles: 2 Controller: Traub TX8i Toolchanger 1: No. of tools: 12 positions X-axis travel: 50 mm Z-axis travel: 50 mm Toolchanger fronside: No. of tools: 7 positions Speeds: 150 - 3000 Rpm 300 - 6000 Rpm Max. diameter: 40 mm X-axis travel: 370 mm Z-axis travel: 250 mm Toolchanger backside: No. of tools: 5 Speeds: 150 - 3000 Rpm 300 - 6000 Rpm Max. diameter: 40 mm X-axis travel: 73 mm Barfeeder: FMB Turbo 5-42 Barlength: 3200 mm Bardiameter: 5 - 42 mm Country of origin: Germany Machine LxWxH: 3400 x 1300 x 1700 mm Machine weight: 4000 kg

SPINNER TTC 300- 52 SMMCY CNC Lathe YOM 2012 Twin-opposed-spindle, twin-turret lathe Control FANUC 31iT Swing diameter 400 mm Max. turning dia ~200-250 mm Max. turning length 400 mm Travels: X1 180 mm, X2 110 mm, Z 450 mm, Y +40/-40 mm Rapid traverse: X1 15 m/min, X2 15 m/min, Z 24 m/min, Y 15 m/min With C-axis Main Spindle 1: Motor spindle with water cooling With hollow shaft measuring system for C-axis drive mounted directly on the spindle shaft Spindle bore 52 mm Spindle speed 0-5000 rpm/ 19 kW Performance Pmax 23,5 kW Torque 150 Nm Spindle nose A6/DIN Sub-Spindle 2: Motor spindle with water cooling With hollow shaft measuring system for C-axis drive mounted directly on the spindle shaft Can be moved on a slide to take over spindle 1 Spindle speed 0-7000 rpm/ 8 kW Performance Pmax 13,8 kW Torque 189 Nm Spindle nose 100 mm Turret 1: At the top of the ...

Compounding - granulation line, consisting of: Extruder twin screw synchronization, drive 31 kW Segment screws and barrels, water-cooled Screws 2x Ø 35 mm – 44 L/D 1x degassing zone (atmospheric) 1x degassing zone (vacuum) 1x side dosage Screen changer double piston type K-SWE 101 with hydraulics Switchboard Water bath, granulator, etc. optionally also available on request.

Cylinder pneum. kpl. for Poly Clip FCA 3430,3430-18 ,3463 ,FCA 120,160 - NEW order no. 150390 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT No.: PL547-17-47-669 Phone 0048/33 812 58 60 fax. 0048/33 812 58 36