double blow used for sale

Mitsubishi L200 Double Cab Pickup Registration date: 18.05.2011 2.5L DI-D Common Rail Diesel Engine Displacement: 2,477 cm³ Power: 94 kW 5-speed manual transmission Mileage: 259,942 km (according to speedometer) Trailer hitch mounted Stainless steel front bar Stainless steel side skirts Loading area cover with gas pressure dampers Roof rails on the loading area cover Cargo compartment lined with protective tray Divider mounted behind the front seats Front power windows Radio retrofitted Airbag driver Service booklet available (partly kept) Engine compartment with signs of wear according to its age Frame with superficial rust, age-appropriate Body with signs of wear due to age and mileage Damage to the front right (fender/bumper damaged) Various scratches, dirt and minor signs of use all around Seat covers and interior with normal signs of wear V ...

2 cells, no welding machine Auction-ID: A7-50851-67

Auction-ID: A1-50750-613

Manufacturer: Isuzu Model: D-Max Double Cab Registration date: 30.07.2012 Mileage 235000 Engine: 3.0 L Turbodiesel Intercooler Power: 100 kW (136 hp) Fuel: Diesel Transmission: Manual Drive: All-wheel drive (4WD) had TÜV until 07/2026 Permissible total weight: 3,500 kg Color: Silver Metallic Double cabin with 5 seats Hardtop on the loading area Trailer hitch available Loading area with plastic tub Scratches due to use and age as well as minor dents present Underbody with superficial rust attachments Hardtop with slight traces of corrosion Interior with usual signs of wear Robust work and utility vehicle Ideal for forestry, agriculture, construction or leisure Sale in used condition Technical function and completeness have not been checked Auction-ID: A1-50785-7

• Ford Ranger Limited double cab, registered as a truck according to registration • Registration date: 26.06.2018 • Mileage: approx. 221,224 km • 3.2 TDCi diesel engine • Displacement: 3,198 cm³ • 5-cylinder • Power: 147 kW / 200 hp • 6-speed manual transmission • Switchable 4x4 all-wheel drive • 2H / 4H / 4L with off-road reduction • Euro 6 • 5 seats • Leather interior • Heated front seats • Automatic climate control • Touch screen / infotainment system • Multifunction steering wheel • 18-inch wheels • Trailer hitch • Fog lights • Loading area/roll bar • Spare wheel • Engine and gearbox run perfectly according to the information • Used, age- and mileage-appropriate condition • Visible scratches, paint and signs of wear • Wear on the driver's seat and steering wheel • Interior and engine compartment dirty • A ...

Equipped with forklift recesses and 2 lifting eyes, With content Auction-ID: A1-50226-91

Double cab, start and drive, air conditioning, tow bar, navigation, Bluetooth, electric windows, 3 keys Auction-ID: A1-40324-9

New Anthracite Double-Leaf Vertical Slat Gate A modern and durable double-leaf gate manufactured from high-quality steel profiles, finished in an elegant anthracite color. The vertical slat (comb-style) design ensures both aesthetic appeal and structural strength, making it suitable for residential and commercial applications. Specification: Gate type: double-leaf, vertical slat (comb-style) Leaf construction: steel profiles 60 mm ×40 mm Posts: 100×100 mm, height 2 200 mm Finish: anthracite (powder-coated) Included: 2 × gate leaves 2 × steel posts 4 × adjustable hinges 1 × gate stop Packaging: The gate is securely packed on a wooden pallet and prepared for safe transport. Auction-ID: A1-50711-30

Horstine Microband microgranulate spreader – double dosing unit Specifications: Brand: Horstine Type: Micro Tape Version: double granulate dispenser Number of storage bins: 2 Number of dosing units: 2 Drive: centrally via drive unit and connecting shafts Dosage: adjustable Application: microgranulate / fine granulate Mounting: Mounting Condition: Used Features: 2 plastic Horstine Microband storage bins with lids 2 separate dosing housings Central drive unit Drive and connection shafts Multiple granulate outputs per dosing unit Dosing hose Mounting arms / mounting frames Various connections and mounting parts Particularities: Suitable for mounting on agricultural machinery for controlled and even dosing of microgranules during work in row cropping. Horstine Microband dosing systems have been developed for the accurate dispensing of small quantities of g ...

New Anthracite Double-Leaf Vertical Slat Gate A modern and durable double-leaf gate manufactured from high-quality steel profiles, finished in an elegant anthracite color. The vertical slat (comb-style) design ensures both aesthetic appeal and structural strength, making it suitable for residential and commercial applications. Specification: Gate type: double-leaf, vertical slat (comb-style) Leaf construction: steel profiles 60 mm ×40 mm Posts: 100×100 mm, height 2 200 mm Finish: anthracite (powder-coated) Included: 2 × gate leaves 2 × steel posts 4 × adjustable hinges 1 × gate stop Packaging: The gate is securely packed on a wooden pallet and prepared for safe transport. Auction-ID: A1-50711-51

Stainless steel, total size approximately 1500x600x1900mm. Without the hoses Auction-ID: A1-50393-35

Function: for surface cleaning/structuring/marking or for cutting/welding, 2 lasers for simultaneous processing on both sides with automatic component recognition and conveyor belt Laser power: 2x100 W Wavelength: 1064 mnm Calculator Clex: 24-05618 number. 2505618, with Windows 11 Pro 64 bit, version. 22H2 and 1x Siemens Certificate: Sinamics S110-SW 4.4 SP3 HF5 Please note: Lot 2 and lots 51-56 are sold only with reservations. The seller still has to confirm the bid Lot 2: the complete processing line. There you will also find a video on the individual process steps and machines Lot 51-56 Individual parts of the machining line. These are the same parts as Lot 2. Either Lot 2 OR Lot 51-Lot 56 is sold Auction-ID: A7-50858-51

B&G Ecoliner double automatic set of sliding gates Brand: B & G Type : Eco - Liner Year of construction 2020 (unused) Colour : Ral 9005 Black Total length +/- 22.00 meters with a passage of 16.00 meters 2.00 meters altitude Features: Printing lists Photocells Cardin engines Handheld transmitters Anchors for fixing Connection and installation diagram Optionally, these gates can also be used as a single, you then have 2 separate automatic sliding gates of 8.00 meters passage Auction-ID: A1-47448-3

Closes sausages and mortadella with a clip on both ends, The Serrano MH-640 is an automatic double clipping machine, originally designed for mortadella and other large sausage calibres. The filled casing is voided and clipped on two sides in one stroke, so one sausage is closed and the next already has its start., The machine sits on a stainless cabinet with castors, with an outfeed chute and roller conveyor for the product. It is pneumatically driven. We did not find a rating plate with the year., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/serrano-mh-640-automatic-double-clipper /, Type: Automatic double clipper, Application: Mortadella and large sausage calibres, Drive: Pneumatic, Outfeed: Chute and roller conveyor, Construction: Stainless cabinet on castors

- Volkswagen Transporter T5 double cab with flatbed - Registration date: 12/2014 - Chassis number (VIN): WV1ZZZ7JZFX014794 - 2.0-litre diesel engine, 140 hp / 103 kW - 6-speed manual transmission - Mileage: 318,250 km - Wheelbase: 3,400 mm - Double cab with rear bench seat - Air conditioning - Comfort Package Plus 1 - Electrical Package 1 - Electric windows - Exterior mirrors electrically adjustable and heated - Radio RCD 210 - Passenger double bench seat with armrest - Trailer hitch - Spare wheel - Flatbed with aluminium side walls - Side walls clad in wood on the inside - Transport bar on the loading area - Complete steel winter wheels on the vehicle - 1 vehicle key available - Inspections according to the manufacturer's maintenance plan every 40,000 km - Timing belt change 11/2020 at 200,000 km - HU/AU due 02/2027 - Signs of wear and tear due to age and mileage ...

Volkswagen Crafter 2.0 TDI – 140 hp – double cab / workshop vehicle Registration date: 02/2016 Mileage: 243,634 km Engine: 2.0 liter TDI diesel Power: 103 kW / 140 hp Transmission: 6-speed manual transmission Wheelbase: 4,325 mm Chassis number: WV1ZZZ2EZG6023197 Color: Orange Former emergency vehicle in the field of asphalt technology Double cab with double passenger bench seat incl. armrest 3-seater bench seat in the 2nd row of seats Partition to the cargo area behind the 2nd row of seats Semi-automatic air conditioning Electric Air Auxiliary Heater Electric windows Exterior mirrors electrically adjustable and heated Electric closing aid for sliding door on the right Radio RSD 2000 with Bluetooth interface Front and rear parking sensors Step at the rear Reinforced rear shock absorbers 2 flash bars on the roof Spare wheel Steel winter complete wheels mounted  ...

2 toilets; 2 sinks; ventilation grille; ventilation unit; light; toilet paper holder holder; lockable; 220v; drainage; forklift slots; crane hooks; 5891 Auction-ID: A1-50865-47

Condition: used and untested. 230 V. Professional double-chamber pizza oven from Cuppone, \"Evolution\" series, in stainless steel version. With 2 separate baking chambers, each with its own temperature control and control panel. On base frame with castors, including extractor hood or upper stainless steel attachment and exhaust pipe. Auction-ID: A1-50891-119

- VW Crafter panel van / double cab with high roof - Registration date: 10/2016 - Chassis number: WV1ZZZ2EZG6057049 - 2.0-litre diesel engine, 140 hp / 103 kW - 6-speed manual transmission - Wheelbase: 3,665 mm - Mileage: 251,229 km - Semi-automatic air conditioning - Electric windows - Electrically adjustable and heated exterior mirrors - Electric air auxiliary heater - Electric closing aid on the sliding door on the right - Radio RSD 2000 with Bluetooth interface - Passenger double bench seat with armrest - 3-seater bench seat in the 2nd row of seats - Partition wall to the cargo area behind the 2nd row of seats - Front and rear parking sensors - Step at the rear - Reinforced rear shock absorbers - Lightning bars on the roof - Spare wheel available - Complete steel winter wheels on the vehicle - Cargo area with interior lining, lashing rails and side installations -  ...

Automatic tipper with controls, double cab 6 seats, cruise control, automatic air conditioning In good working condition. Auction-ID: A3-46136-6041

The Thimonnier M3200 is an automatic double head vertical form / fill / seal machine (Vertical FFS) to pack liquid & viscous products in pillow pouches using rolls of polyethylene. Possible products are: pasteurized milk / water / fruit juices / curdled milk / liquid yoghurt / nectars / cream / greek yoghurt / kefir / smetana / rayeb / sauces / soups or syrups. The pouches are continuously filled from an over tank headed with constant level and controlled by a proportional valve and a level sensor.The machine is very flexible and reach high output and high dosing accuracy. Strong frame made from steel profiles covered with stainless plates for maximum rigidity. A Clean-in-Place (CIP) has been integrated into the M3200’s design. All of the parts that come into contact with the product are built from stainless steel. Rate of production: 5.000 - 8.000 pouches per hour. Bag volume: 70 - 1. ...

: neu : ca. 4 Monate ab Auftragse : Italien : 132500 € : 2504.25 € : 200 to : 500 mm : 1250x1000 mm : 600 mm : 25 mm/s : 3,5 mm/s : 7.5 kW : 1550 mm : 1300 mm : 2700 mm 4-pillar guide ram guide round table and ram with T-slots 2 hand operation Siemens PLC manometer users manual OPTIONS: Light barrier € on Request Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Decompression valve € on Request Oil cooler with decompreission valve € on Request Pressur switch € on Request The data for this ad was created with ...

: neu : ca. 4 Monate ab Auftragse : Italien : 172500 € : 3260.25 € : 300 to : 500 mm : 1250x1000 mm : 600 mm : 22 mm/s : 2 mm/s : 7.5 kW : 1750 mm : 1500 mm : 2800 mm 4-pillar guide ram guide round table and ram with T-slots 2 hand operation Siemens PLC manometer users manual OPTIONS: Light barrier € on Request Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Decompression valve € on Request Oil cooler with decompreission valve € on Request Pressur switch € on Request The data for this ad was created with M ...

: neu : ca. 4 Monate ab Auftragse : Italien : 63500 € : 1200.15 € : 70 to : 500 mm : 900x700 mm : 600 mm : 25 mm/s : 6 mm/s : 4 kW : 1140 mm : 940 mm : 2350 mm 4-pillar guide ram guide round table and ram with T-slots 2 hand operation Siemens PLC manometer users manual Light barrier € on Request Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Decompression valve € on Request Oil cooler with decompreission valve € on Request Pressur switch € on Request The data for this ad was created with ModulMWS - the so ...

: neu : ca. 4 Monate ab Auftragse : Italien : 74800 € : 1413.72 € : 100 to : 500 mm : 1000x800 mm : 600 mm : 26 mm/s : 5 mm/s : 4 kW : 1260 mm : 1060 mm : 2400 mm 4-pillar guide ram guide round table and ram with T-slots 2 hand operation Siemens PLC manometer users manual Light barrier € on Request Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Decompression valve € on Request Oil cooler with decompreission valve € on Request Pressur switch € on Request The data for this ad was created with ModulMWS - the ...

: neu : ca. 4 Monate ab Auftragse : Italien : 103500 € : 1956.15 € : 150 to : 500 mm : 1250x1000 mm : 600 mm : 23 mm/s : 4 mm/s : 5.5 kW : 1520 mm : 1270 mm : 2500 mm 4-pillar guide ram guide round table and ram with T-slots 2 hand operation Siemens PLC manometer users manual Light barrier € on Request Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Decompression valve € on Request Oil cooler with decompreission valve € on Request Pressur switch € on Request The data for this ad was created with ModulMWS - ...

: neu : ca. 4 Monate ab Auftragse : Italien : 65000 € : 1228.5 € : 35 to : 500 mm : 800x500 mm : 600 mm : 125 mm/s : 9 mm/s : 68 mm/s : 4 kW : 1100 mm : 1100 mm : 2300 mm 4-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 71300 € : 1347.57 € : 60 to : 500 mm : 800x500 mm : 600 mm : 120 mm/s : 8 mm/s : 58 mm/s : 5.5 kW : 1100 mm : 1100 mm : 2350 mm 4-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 78000 € : 1474.2 € : 85 to : 500 mm : 900x600 mm : 600 mm : 105 mm/s : 7 mm/s : 58 mm/s : 7.5 kW : 2250 mm : 1150 mm : 2400 mm 4-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 104000 € : 1965.6 € : 125 to : 500 mm : 1200x700 mm : 600 mm : 115 mm/s : 7 mm/s : 70 mm/s : 15 kW : 2550 mm : 1500 mm : 2600 mm 4-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 123000 € : 2324.7 € : 170 to : 500 mm : 1200x700 mm : 600 mm : 110 mm/s : 7 mm/s : 70 mm/s : 19 kW : 2700 mm : 1600 mm : 2650 mm 4-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 164500 € : 3109.05 € : 260 to : 500 mm : 1400x1000 mm : 600 mm : 75 mm/s : 5 mm/s : 60 mm/s : 22 kW : 2800 mm : 1650 mm : 2750 mm 4-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- 2 oscillating heads. - The 2 tables work in alternative cycles. - Table measurements: 440 x 400 mm. - Tables tiltable ± 15°, adjustable in height and depth. - Vertical adjustment of the tables approx. 100 mm. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-50834-32

x-travel:14000 mm y-travel:3100 mm z-travel:1.200 mm (220 - 1.420) mm distance between columns:4.417 mm table-size:14.000 x 2.500 mm workpiece weight:15.000 kg/m drive capacity - spindle motor:25 kW spindle cone:63 HSK spindle turning speed range:18000 rpm milling feeds:30000 mm/min dimensions of the machine ca.:15.000 x 8.418 x 6.033 mm weight of the machine ca.:135 t CNC controller: SIEMENS 840 D universal milling head:5 Achsen mit ?C5C? Elektrospindel automatic tool changer:24 fach

- Total installed power 5.30 KW. - Length of the piece to be cut from 310 mm to 4100 mm. - One head is fixed and the other mobile with automatic positioning commanded by programmable electronic control. - The 2 heads are tiltable. - Disc diameter 450 mm. - 2.20 KW motor in each head. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of disassembly and loading are those specified as additional costs. Auction-ID: A7-50834-601

faceplate diameter:4000 mm swing diameter:4300 mm turning height:2500 mm max. workpiece weight:63 t total power requirement:125 kW weight of the machine ca.:134 t dimensions:6100x10400x8400 mm Used Vertical Turret Lathe with 2 plungers and CNC Siemens 840 table is hydrostatically. Machine equipped with a grinding head. CNC was overhauled in 2000.

pressure:800 t distance between columns:2900 mm stroke:350 mm Controls:SIEMENS PRESS DESIGN:. - frame design : H-frame :. - Drive type : mechnical :. - openings in uprights : yes :. - number of cushions:0 - opening in table : yes :. - moving bolster : yes :. PRESS FORCES:. - total force (nominal):800 to PRESS TABLE:. - clamping surface (left-right):2800 mm - clamping surface (front-back):2800 mm - rectangular breakthrough (width):2000 mm - rectangular breakthrough (front-back):1800 mm - height above floor level:850 mm RAM:. - clamping surface (left-right):2800 mm - clamping surface (front-back):2800 mm - stroke:350 mm - number of strokes max:55 /min RAM (MECHAN. PRESS):. - ram adjustment:350 mm TOOL ASSEMBLY DIMENSIONS:. - shut height (stroke down, adjustment up):1100 mm - distance between columns (H-frame):2900 mm - Free passage between side columns (width):2560 mm ...

adjustment drive of the grinding spind.slide:0,0025 - 0,05 mm total power requirement:100 kW adjustment of grinding head slide:150 mm weight of the machine ca.:17 t grinding spindle drive:2 x 37 kW grinding width:30-150 mm peripheral speed:34 m/sec workpiece speeds:60 - 300 mm/Sek. grinding height:70 mm grinding wheel diameter:750 mm grinding tools:750 x 75 x 350 mm grinding wheel turning speeds:870 U/Min. max. workpiece diameter:250 mm

grinding height:-- mm grinding width:220 mm grinding wheel diameter:762 mm total power requirement:90 kW weight of the machine ca.:13 t grinding spindle 1 drive::37 kW grinding spindle 2 drive::37 kW Grinding machine for pre-grinding the connecting rod With 2 replacement spindle motors

x-travel:6500/13150 mm y-travel:4000 mm z-travel:1250 mm w-axis:2250 mm table surface area:5500/12150 x 3000 mm max. workpiece weight:70.000/105.000 kg ram head dimension:480 x 510 mm milling spindle motor:63 kW max. torque on the spindle:3300 Nm tool taper:DIN 39871 AD ISO 50 milling head speed:6,3 - 4000 U/min feed speeds:1 - 24000 mm/min w-axis:1 - 6000 mm/min distance between columns:3500 mm passage:3000 mm total power requirement:120 kW weight of the machine ca.:245 t dimensions of the machine ca.:29,0 x 7,7 x 8,1 m Machine is in nearly new condition and was completely modernized in 2020! With CNC SIEMENS 840 D Automatic tool magazine for 153 tool positions Automatic milling head magazine for 6 milling heads Machining module ? straight ? straight long ? Machining module ? angle standard ? 4000 rpm, 144 x 2.5°, ISO 50 Machining module ? narrow angle extended ? 40 kW, 4000 rpm, 1800  ...

total power requirement:2,2 kW dimensions of the machine ca.:2,15 x 1,47 x 2,24 m JAESPA V 380 DG /DGHS Vertical Mitre Band Saw This machine is a vertical double-mitre band saw designed for professional use in the metal, steel and mechanical engineering industries. In addition to straight 90° cuts, this band saw also enables mitre cuts to the left and right. The mitre range is up to 60° on one side and up to 45° on the other. This makes the machine particularly suitable for cutting profiles, tubes and solid material. The cutting speed and hydraulic saw feed can be adjusted to suit the material being cut. The machine is equipped with a coolant system. Technical specifications: ·Saw motor: 2.2 kW ·Hydraulic pump: 0.37 kW ·Coolant pump: 0.18 kW ·Belt speed: 17?100 m/min ·Saw blade dimensions: 4,250 × 34 × 1.1 mm ·Workpiece support height: 1,000 mm ·Coolant tank: 50 litres Robust ...

pressure:250 t passage width:1280 mm stroke:bis 500 mm total power requirement:47 kW weight of the machine ca.:23 t dimensions of the machine ca.:2200 x 1850 x 4600 mm table surface area:1250 x 1000 mm dayligth:800 mm daylight between the side columns:520 x 750 mm table height above floor:1000 mm Documents: vorhanden

faceplate diameter:4000 mm swing diameter:4300 mm turning height:330 mm faceplate turning speed range:1 - 92 U/min workpiece weight:18 t feeds:1 - 4000 mm/min main drive motor:55 kW total power requirement:85 kVA weight of the machine ca.:64 t dimensions of the machine ca.:90, x 7,2 x 5,5 m with CNC SIEMENS 840 D for 4 axis 2 Vertical Supports tool Basic holder chip conveyor

faceplate diameter:4770 mm swing diameter:7000 mm turning height:1000 mm slide stroke:1000 mm workpiece weight max.:100000 kg faceplate turning speed range:2 - 20 U/min feed speeds:1 - 10000 mm/min rapid traverse:10 m/min ram head dimension:250 x 250 mm main drive:100 kW total power requirement:200 kW with CNC SIEMENS 840 D 2 Vertical Supports with toolchanger 12 pockets C-axis and driven tooling SK 50 37 Kw 3000 rpm Chip conveyor and coolant attachment

faceplate diameter:5000 mm swing diameter:6100 mm turning height:2400 mm ram stroke each side:1490 mm ram head dimension:340 x 340 mm max. workpiece weight:100.000 kg total power requirement:100 kW weight of the machine ca.:155 t faceplate turning speed range:0,4 - 50 U/min with 2 axes CNC SIEMENS 840 D

pressure:200 t distance between columns:2100 mm stroke:550 mm Distance table/ram, stroke up:1800 mm table surface area:2000 x 2800 mm table height over floor:760 mm ram surface:2000 x 2000 mm Side window:2000 mm feed down:400 mm/s power requirement:51,0 kW weight:33,0 t dimensions (WxDxH):3,25 x 3,5 x 5,4 m Height above floor:5,4 m foundation pit:not necessary

pressure:200 t distance between columns:2100 mm stroke:550 mm Distance table/ram, stroke up:1800 mm table surface area:2000 x 2800 mm table height over floor:760 mm ram surface:2000 x 2000 mm Side window:2000 mm feed down:400 mm/s power requirement:52,0 kW weight:33,0 t Dimensions (WxDxH):3,25 x 3,5 x 5,4 m Height above floor:5,4 m foundation pit:not necessary

pressure:400 t distance between columns:3250 mm distance table/ram, max. stroke up, adjustment up:1000 mm stroke:800 mm table surface area:3250 x 1400 mm table height over floor:1250 mm die cushion capacity:170 t die cushion stroke:200 mm die cushion area:1800 x 1000 mm distance between cutting impact cushioning:2610 mm side window:800 mm ram surface:3250 x 1400 mm return capacity:51 t speed down:300 mm/s speed up:300 mm/s working speed:16 - 33 mm/s quantity of oil:2900 l power requirement:100,0 kW weight:70,0 t Dimensions (WxDxH):4,9 x 3,1 x 7,6 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 cutting impact absorption:hydraulic

pressure:400 t distance between columns:1250 mm stroke:250 fix mm no. of strokes:45 /min distance table/ram, max. stroke up, adjustment up:825 mm table surface area:1000 x 900 mm column travel -side:400 x 700 mm ram surface:1000 x 900 mm ram adjustment:100 mm capacity of ejector in table:40 t ejector stroke:160 mm power capacity:270,0 kW weight:44,0 t Dimensions (WxDxH):2,4 x 3,6 x 7,2 m height over floor:6,4 m

pressure:125 t stroke:25 fix mm no. of strokes:70 - 700 /min distance between columns:1150 mm distance table/ram, max. stroke up, adjustment up:400 mm table surface area:1150 x 1000 mm hole in the table:900 x 220 mm side window:650 mm ram surface:990 x 850 mm ram adjustment:60 mm material width:250 mm material thickness:2,5 mm power requirement:46,5 kW weight:29,5 t roll feed:mechanical, Schuler, WK 8-250