135,358 used machines on RESALE, but how to find them? Machine Search
Multivac double chamber vacuum machine, model: C 450, seal length: (4x) 470 mm, chamber: (2x) 625 mm x 470 mm, with Rietschle vacuum pump, type: VCH 140 (05), capacity: 140 m³ per hour, total dimensions: 1230 mm x 950 mm x 1020 mm,
TipperTie Alpina mobile automatic double clipper, type: Swipper 15/12, plastic outfeed belt, belt width: (2x) 75 mm, total dimensions: 1150 mm x 1000 mm x 1600 mm.
Double flange, pipe connector PAGUS DN 125/139 DIN 2576 PN 10 width 80 mm flange: Ø 250 mm stainless steel flange ! Dimensions: 250 x 250 x 80 mm
Double pressure gauge for fine measurements, pressure gauge MESSGERÄTEWERK BEIERFELD 1/FM220 2 x 0 - 60 kp/cm² (0 - 60 bar) TGL16374 Accuracy class: 0.0.2 6 Housing diameter: Ø 150 mm Connection thread: 2x M20 x 1.5 New ! Dimensions: 220 x 180 x 75 mm
Double bench grinder WMW Type ST300 Year: 1970 Disc drm.: 300 mm Power: 1.1 kW Dimensions: 750 x 420 x 1200 mm
Inotec GmbH double shaft paddle mixer, machine type: IM-2500V, machine number: 301-00488, year of construction: 2013, 400 V, 3 Ph, 50 Hz, 58 A, 28 kW, 34 kVA, 6 bar, 200 l/min, dimensions: 4200 mm x 2300 mm x 2200 mm.
Double pressure gauge for fine measurements, pressure gauge MESSGERÄTEWERK BEIERFELD 1/FM220 2x 0 - 25 kp/cm² (0 - 25 bar) TGL16374 Accuracy class: 0.25 6 Housing diameter: Ø 150 mm Connection thread: 2x M20 x 1.5 New !' Dimensions: 220 x 180 x 75 mm
Double bench grinder SOLID DS300STA Disc diameter Ø max 300 mm Disc width max 40 mm 1.5 kW 1500 rpm 220 / 380 V Dimensions: 700 x 530 x 1100 mm
Double bench grinder VEM SEWStNa40SENa350 Disc diameter Ø 350 / 350 mm Disc width 63 / 40 mm with cooling device 1,1,1,000 5 kW 3000 rpm 220 / 380 V Dimensions: 1050 x 950 x 1300 mm
Double Ball Valve 3-Way HYDAC KHB-SO1111 PN10BAZ 3235764-0 Pneumatic Actuator Zero Series pmax 10 bar DSA-046/180 60000556 New ! Dimensions: 180 x 115 x 50 mm
Double bench grinder, brush deburring machine, deburring machine VEM, ELBTALWERK SEWStN40SEN350 disc diameter Ø 350 / 350 mm Disc width 63 / 40 mm with a wire brush ! 1.5 kW 1500 rpm 220 / 380 V used, tested ! Dimensions: 1400 x 800 x 1250 mm
Double ring wrench offset HEYCO NW 65 / 70 chrome vanadium DIN 838 / ISO 1085 New ! Dimensions: 710 x 110 x 75 mm
Double bench grinder GISAG SE 2x400/1 TGL 24500 Disc diameter: Ø max 400 mm 4 kW 380 V Protective cover is missing !' used, tested !' Dimensions: 1100 x 700 x 1200 mm
CNC turning-milling center Emco Hyperturn 65 Powermill SMYB Commissioning 7/2019 At call! Siemens 840D-SL Shopturn Main spindle BigBore spindle passage 76mm KK8 - 4,000 1/min Sub-spindle KK6 - 5,000 1/min 40-speed chain magazine HSK-T63 Turret bottom VDI30 / Sauter Electronic handwheel Emco Tool Breakage and Wear Gear milling Shopturn Expansion Pack 5-axis simultaneous machining Energy management for Sinumerik OPC UA / Siemens interface 3D machine model Emco Standard Bar Feeder Interface Machine Status Lamp LED Multiflow Cleaning Gun Oil Mist Separator Belt filter system with IKZ Main Spindle Clamping Hook Hainbuch Clamping Top Mini Combi Ax Hoist Sub-spindle Schunk 185mm THW-plus with hard jaws The options list is complete! No interest in dealer enquiries! No separate dealer price! WB mechanics GmbH is a precision mechanics workshop that markets its ...
Double Ball Valve 3-Way HYDAC KHB-SO1111 PN10BAZ 3235764-0 Pneumatic Actuator, Zero Series < -br />pmax 10 bar DSA-046/180 60000556 used / repaired Prototype 1+4 Dimensions: 180 x 115 x 50 mm
CNC turning-milling center Emco Hyperturn 65 Powermill SMYB Commissioning 10/2017 At call! Siemens 840D-SL Shopturn Main Spindle SuperBigBore Spindle Passage 95mm KK8 - 3,500 1/min Sub-spindle KK6 - 5,000 1/min Milling spindle HSK-T63 12,000 1/min / new milling spindle 2024 40-speed chain magazine HSK-T63 Turret bottom VDI30 / Sauter Electronic handwheel Emco Tool Breakage and Wear Gear milling Shopturn Expansion Pack 5-axis simultaneous machining Energy management for Sinumerik OPC UA / Siemens interface 3D machine model Emco Standard Bar Feeder Interface Machine Status Lamp LED Multiflow Cleaning Gun Oil Mist Separator Belt filter system with IKZ Main Spindle Clamping Hook Hainbuch Clamping Top Mini Combi Ax Hoist Sub-spindle Schunk 185mm THW-plus with hard jaws The options list is complete! No interest in dealer enquiries! No separate dealer price! ...
grinding length: 8400 mm grinding width: 1450 mm workpiece height: 1250 mm surface area: 8000 x 1250 mm table height over floor: 920 mm distance between columns: 1470 mm workpiece weight max.: 59700 kg weight of the machine ca.: 59,7 t dimensions of the machine ca.: 22 x 5 x 5 m Adjustment ranges: -Crossbeam, vertical 1250 mm -Grinding support, horizontal 3100 mm Adjustment speeds: -Machine table (X-axis) infinitely variable 1-45 m/min Table creep speed 5 m/min -Grinding support, horizontal (Y-axis) Rapid traverse 3000 mm/min Feed, step 0.001-0.099 mm Feed rate, continuous 100-3000 mm/min Creep speed 18+1 mm/min Tip infeed 0.001-0.019 mm -Crossbeam (W-axis) Rapid traverse 410 mm/min Table drive: -Oil transmission, Type Iv4 -Cylinder-Ø 185 mm -Piston rod Ø 130 mm -Drive motor 22 kW The data for this ad was created with ModulMWS - the ...
CONTROLS CNC controls SIEMENS 840 D WORKING RANGE (DOUBLE DISC GRINDER) Grinding wheel diameter: 750 mm grinding width max. - throughfeed grinding: 180 mm material thickness max. - throughfeed grindin: 30 mm grinding width max. - plunge cut grinding: 300 mm material thickness - plunge cut grinding: 80 mm GRINDING SPINDLE 1 drive power: 48 kW GRINDING SPINDLE 2 drive power: 48 kW COMPONENT-FEEDER Feeder Design: rotary Feeder feeder velocity max.: 20 mm/min feeder velocity min.: 240 mm/min DIMENSIONS / WEIGHTS space requirements -left/right-: 4900 mm space requirements -front/back-: 5000 mm total height: 3100 mm total weight approx.: 13000 kg with inline measuring system DISKUS IONIC 17A Emulsion treatment system HÜTTNER F6-157, YOM 2006
Double sided edgebander manufactured in 2004. This HOMAG OPTIMAT KFR 526/10/A3/35 features a robust design suitable for various applications. It operates at a voltage of 400 V and has a load capacity of 250 A. If you are looking to get high-quality edgebanding capabilities, consider the HOMAG OPTIMAT KFR 526/10/A3/35 machine we have for sale. Contact us for further details.
Max. saw length: 6,000 mm Max. saw blade diameter: 500 mm Automatic positioning via Diamond control of length and angles Swivelling of the angles inwards and outwards possible (20-135°) Moving roller conveyor Soundproof booth Minimum quantity spraying device Chip conveyor belt Weight: approx. 2,800 kg
Manufacturer: Homag, Type: FL 62/25, Year: 1988, Maschinensteuerung: Homag, Min.-max. workpiece length in mm: 250-1500, Min.-max. workpiece height in mm: 3-80, Cam distance mm: 900, Feeding speed min-max m/min: 5-40, Feed stepless: yes, Min-max protrusion of workpiece mm: 30, verängerte Kette mm: 900, Nockenaushebung: no, gesteuerte Fräsaggregate: 2, Scoring saw controlled: yes, 1st milling unit kW / rpm: 4,5/5890, 2nd milling unit kW / rpm: 4,5/5890, Year :1988
Pressure total: 80 - 800 ton Ram stroke: 1600 mm Free frontal opening L-R: 2850 mm Free lateral opening F-B: 1000 mm Daylight: 1900 mm Table surface area : 2800 x 2000 mm Slide area: 2800 x 2000 mm Die cushion capacity in table: 32 - 320 ton Die cushion stroke: 400 mm Die cushion pad area: 2500 x 1700 mm Approach speed: 400 mm / sec Working speed: 5 -42,7 mm / sec Return speed: 420 mm / sec Required power: 246 kW Height over floor approx.: 7785 mm Weight of machine approx.: 100 ton No. of moving bolster: 1 pcs.
Pressure total: 140 ton Stroke: 800 mm Daylight: 1.004 mm Free frontal opening L-R: 2.060 mm Table surface area : 2.000 x 520 mm Slide area: 2.040 x 520 mm Working speed: 4 -20 mm / sec Rapid travel: 135 mm / sec Return speed: 120 mm / sec Weight of machine approx.: 14 ton Height over floor approx.: 4.810 mm Oil volume: 700 l
Manufacturer: Mekanika, Type: Nut und Federfräse, Year: unbekannt, Work piece width min-max mm: 10-250/300, Working width min-max mm: 10-ca.300, Working hight min-max mm: 10-30, Feeding speed min-max m/min: pneumatisch, Overall milling units: 3 +2, 1st milling unit kW / rpm: 2,5/2580, 2nd milling unit kW / rpm: 2,5/2580, 3rd milling unit kW / rpm: 2,5/2580, 4th milling unit kW / rpm: 2,5/2580, 5th milling unit kW / rpm: 2,5/2580, Diameter of the spindle mm: 30, Diameter of the spindle mm: 30, Year :unbekannt
Pressure total: 1400 ton Stroke: 950 mm Daylight: 2000 mm Table surface area : 3600 x 2500 mm Slide area: 3600 x 2500 mm Die cushion capacity in table: 400 ton Die cushion stroke: 500 mm Die cushion pad area: 3060 x 1860 mm Approach speed: 400 mm / sec Working speed: 40 / 80 mm / sec Return speed: 400 mm / sec Oil volume: 5000 l Required power: 450 kW Weight of machine approx.: 240 ton
Unused, 2x toilet with sink, lockable, Auction-ID: A1-47445-36
Cutting depth:70 mm engine output:12.4 A, 220/380 V , 2 x 6 kW working length:2500 mm dimensions of the machine ca.:3900 x 1100 x 1000 mm weight:1500 kg
pressure:60 t distance between columns:650 mm stroke:220 mm distance table/ram, max. stroke up, adjustment up:410 mm table surface area:600 x 525 mm hole in the table:110 mm table height over floor:900 mm side window:200 mm ram surface:560 x 490 mm power requirement:15,0 kW dimensions (WxDxH):1,9 x 1,3 x 2,7 m foundation pit:not necessary
Pressure total: 500 ton Stroke: 1100 mm Daylight: 1500 mm Table surface area : 2000 x 1250 mm Slide area: 2000 x 1250 mm Die cushion capacity in table: 160 ton Die cushion stroke: 300 mm Approach speed: 650 mm / sec Required power: 55 kW Weight of machine approx.: 50 ton
Manufacturer: Düspohl, Type: DEA 150, Year: ca.1995, Control: hand, Pneumatical clamping system: yes, Schnitthöhe min-max mm: 120, Schnitttiefe min-max mm: ca.150 -150, Power saw engine kW: ca.3, Action controlled: yes, Saw blade diameter max mm: 350, rotations controlled: 4500, Year :ca.1995
Manufacturer: Friulmac , Type: Quadromat S, Year: 2010, Machine no 1: yes, Motore Maschine 1: 3, Machine 2: yes, Motore Maschine 2: 3, Conveyor: yes, Work piece width min-max mm: 207-800, Min.-max. workpiece length in mm: 250-2010, Min.-max. workpiece height in mm: 7-22, Feeding speed min-max m/min: 10-90, Feed stepless: yes, Overall milling units: 3+3, Year :2010
pressure:250 t distance between columns:1110 mm stroke:250 mm Distance table/ram, max. stroke up, adjustment up:500 mm Table surface area:1100 x 900 mm Table height above floor:950 mm Side window:690 mm Ram surface:1100 x 900 mm Oil volume:730 l Power capacity:56,0 kW Dimensions (WxDxH):2,3 x 1,55 x 3,96 m
pressure:300 t distance between columns:1800 mm stroke:1000 mm Distance table/ram, max. stroke up, adjustment up:1300 mm Table surface area:1600 x 1200 mm Table height above floor:1080 mm Ram surface:1600 x 1200 mm Weight:24,0 t Dimensions (WxDxH):2,8 x 2,1 x 6,0 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2
Manufacturer: Homag, Type: NFL 26/6/10/PW/L, Year: 2002, Control: Homag, Work piece width min-max mm: 136-250, Min.-max. workpiece length in mm: 2500, Min.-max. workpiece height in mm: 10-25, Working width min-max mm: 136 - 250, Feeding speed min-max m/min: 15 - 60, 1st milling unit kW / rpm: Ritzen 4,5 kW/6000 U/min, 2nd milling unit kW / rpm: Ritzen 4,5 kW/6000 U/min, 3rd milling unit kW / rpm: 6,6 kW Profilfräsen 6000 U/min, Free space for units: 2x 460 mm, Machine overhauled: no, System dismantled: yes, Year :2002
Manufacturer: Celaschi, Type: TSA 520, Year: 1987, Maschinensteuerung: max. 290, Motore Maschine 1: 150, Magazine: 150, Schrumpftunnel: 2x3, Min.-max. workpiece height in mm: 5,5, Working hight min-max mm: 5,5, Cam distance mm: 5,5, Year :1987
Manufacturer: Haffner, Type: DGS 202E 6000, Program control: yes, Pneumatical clamping system: yes, Saw blade tiltable up to °: 45-90, Schnittlänge min-max mm: 400-6000, Power saw engine kW: 2,2, Width adjustment by engine: yes, Saw blade diameter max mm: ca.500, rotations controlled: 2850,
Manufacturer: WMS, Type: 20051, Year: 2001, Control: Hand, Pneumatical clamping system: yes, Saw blade tiltable up to °: 90-45, Schnitthöhe min-max mm: ca.100, Schnitttiefe min-max mm: 400, Schnittlänge min-max mm: 2110, Width adjustment by engine: yes, Saw blade diameter max mm: 450, Hauptmotorsäge kW: 4, rotations controlled: 2860, Year :2001
Manufacturer: Hüllhorst, Year: ca. 1970, Control: hand, Width adjustment manually: yes, Action controlled: no, Cutting width max mm: 1200, Sägeblätter schwenkbar bis ° : no, Cutting hight max mm: ca.100, Cutting lenght max mm: 140, rotations controlled: 6000, Saw blade diameter max mm: 450, Main engine kW: ca.4, Year :ca. 1970
Manufacturer: Doppelgehrungssäge, Type: DKG 400 A, Year: ca.1984, Control: Hand , Pneumatical clamping system: yes, Saw blade tiltable up to °: 45-90, Schnitthöhe min-max mm: ca. 70, Schnitttiefe min-max mm: 100, Schnittlänge min-max mm: 3500, Power saw engine kW: 3 KW,100 Hz, Width adjustment by engine: yes, Action controlled: yes, Saw blade diameter max mm: 300, rotations controlled: 4500, Bohreinheit Horizontal: 100, On customer order: inkl. Bohrstation, Year :ca.1984
Manufacturer: Homag , Type: KF 20/13/QA/10 + KF 20/15/25/QA, Year: 1997, Control: Homatic, Min.-max. workpiece height in mm: 8 - 60, Machine no 1: KF 20/13/QA/10, Angular transfer: TD 31/25/08, Machine 2: KF 20/15/25/QA, Arbeitsbreite Maschine min - max mm 1: 240 - 1000, Arbeitsbreite Maschine min - max mm 2: 240 - 2500, Cam distance mm: 500, Feeding speed max m/min: 10 - 40, Premilling: KD 10, Edge magazine: 2, Mitre stations: HL 04, radius milling: 0,5 kW, Buffing unit: 0,25 kW, Buffing unit: 0,25 kW, Top pressure belt/roller: Riemen, Year :1997
Manufacturer: Doppelgehrungssäge, Type: DKG 400 A, Year: 1984, Control: Hand / Teilautomatik, Pneumatical clamping system: yes, Saw blade tiltable up to °: 45-90, Cutting hight max mm: ca. 70, Cutting lenght max mm: 2500, Power saw engine kW: 3, 100 Hz, Width adjustment manually: yes, Width adjustment by engine: yes, Action controlled: yes, Saw blade diameter max mm: 300, rotations controlled: 4500, Exhaust diameter mm: 100, inkl. Bohrstation, Year :1984
Manufacturer: Koch, Type: Compact, Year: 1991, Control: Programm, Working widht max mm: 150-2500, Arbeitstiefe max mm: 200, Working thickness max mm: 80, Schwenkbereich Grad in X: +30-90, Dovel units: 3, Dovel diameter mm: 10-12, Drill gearings: 2, Drill gearings: 2, Drill gearings: 2, Drill spindles per support: 5, Gluing: yes, Dovel insertion: yes, Raster 32 mm: yes, Compressed air bar: 6, Wight approx. kg: 3000, Year :1991
maximum number of results exceeded
please refine your search
4.000 € 
