dosing used for sale

Dosing station for lye Stabicip 0 X 1 380 V, 50 Hz; 6 bar

New dosing pump from Prominent

Dosing unit with 6 prominent pumps (used)

dosing pump BRAN LUEBBE for premix performance 40,000 lt/h

Dosing scale with precision spiral screw feeder in stainless steel version, with pre-container and weighing frame in frame, trough dimensions: 540 mm long x 370 mm wide x 320 mm high, with large loosening spiral in the trough, drive 0.47 kW via timing belt and Reduction gearbox, discharge pipe diameter: 50 mm.

Dosing quark balls or spray-moulded portioners is used for the portioning of small quantities of homogeneous masses for the fuelling of patisserie products in small volume production,all in manual operation. Robust dose quantity infinitely adjustable. All parts made of stainless steel or food-grade plastic that come with the fuel mass in a friendly. weight of the frame 1.4kg mass: approx. 300Bx430H in mm. with stainless steel stand very good condition!; available immediately!

Dosing pumps Elados EMP 12500P06 (2 stub) Elados EMP 13300P035 (1 piece) Elados EMP 14000P035 (1 piece)

Dosing with Endress and Hauser mass flow meter consisting of a cabinet (with Siemens plc and touch panel for dosage control and pneumatic valve Island) and two Endress and Hauser mass flow meters. Documentation including user's manual available

- 5 aluminium silos with attachment filter incl. discharge screw with slide made of V2A - 4 aluminium silos for manual filling with discharge screws - 3 dosing scales - Optional with dust filter

- Vibro dosing gutters/vibrosiebefrome from food production - from pasta production - in stainless steel - with several sieg inserts

Glue dosing station MAYER AND MAYER DXR R2020R L-P-PUB PDX20 40-100 P manufactured in 2015 in Germany by MAYER & MAYER HANDELS GMBH. The station was in use for about 3 months in the process. After this time, it was shut down, cleaned and properly secured. All gaskets in the station were replaced with new ones. It is a charging station for manual dispensing / application guns for two-component adhesives. The gun is included for free. Spare parts are offered for the station. Price of the parts to be individually agreed.

Dosing unit,stainless steel,double screw in the bottom,type K Tron,inlet 370x370 mm

Used WAGNER Flexcontrol Plus mixing and dosing system control Electronic 2K mixing plant for high and low pressure requirements. For solvent paint 2K, 3K and 4K varnishes and adhesives Water-based 2K, 3K and 4K paints and adhesives With operating instructions Comes from company dissolution Functioning Original price of the controller approx. 8000.-Euro Good condition.Inspection and pick-up possible. Shipping Germany (without islands) 100,00 Euro net Sale to traders without warranty The goods can be viewed at the location 59379 Selm by appointment. Company Michael Bergau Tel. 0152/29500504 You will receive an invoice with VAT shown. Payment: Payment by bank transfer before delivery of the goods. Or cash payment on collection.

Very well preserved dosing screw BÜHLER MNSG 160 Length 1.84 m 0,25/1,0 kw - 73/300 rpm n=31/126 rpm, Slope 120, pushing, One u. Made of ø200 with counter flanges Cleaned and test run carried out We have 5 screws of this type in lengths between 1.8 and 2.1 m in stock.

Dosing pump, chemical pump, with water jet pump STÜBBE 1x water jet pump: SP 820 PN10, DN15 2x ball valve: +GF+ ( GEORG FISCHER ), type: 546 < br /> d32DN25 1x metering ball valve: +GF+ ( GEORG FISCHER ), type: 323 d20DN15 1x check valve: +GF+ ( GEORG FISCHER ), Type: 336 DN15 1x variable area flow meter: GEMÜ, type 855 20D 72214 534 375 DN20 1x flow restrictor: KOBOLD REG 40 l/min as good as new Dimensions ( pump ): 820 x 240 x 115 mm Dimensions ( packaging ): 320 x 225 x 225 mm

Dosing device EMD PM50/25-UY 48-GB0-60:1 40 rpm 48 V DC Container capacity: approx. 5 l inclusive 2nd mounting foot ! New ! Dimensions: 480 x 400 x 300 mm

Dosing screw INOX Length: 200 cm Diameter: 150 cm Motor: 1.1 kW Revolutions: 25

Paint dosing system from Fluid Solution incl. software

Chemical dosing station PAGUS plastic cabinet 710 x 800 x 1690 mm 2 air-operated diaphragm pump and various valves and sensors cabinet almost metal-free ! Dimensions: 750 x 950 x 2100 mm

Dosing pump with tank and agitator, chemical pump SERA M412S0 diaphragm pump max. 3 bar 0 - 500 l/h Engine: 0,,37 kW 220 / 415 V Mixer: TMR AMS 018/8 Engine: 0,18 kW 670 rpm 230 / 400 V Tank: 230 l stainless steel ! used, tested ! Dimensions: 550 x 670 x 630 mm

Dosing monitoring PROMINENT Flow Control 2 Part No.: 1009338 Operating pressure: max. 16 bar Connection: M20 x 1.5 Switching capacity: max. 10 W Switching voltage: max. 200 V DC Switching current: max. 0.5 A approx. 0.8 m Connection cable Material: PVDF / FPM-B used, tested ! Dimensions ( without cable ): 170 x 45 x 57 mm

Dosing monitoring PROMINENT Flow Control Part No.: 792077.0 Operating pressure: max.16 bar connection: 6 - 12 mm, M20 x 1.5 / G 3/4 ( inch ) approx. 0.75 m Connection cable Material: PP / EPDM used, tested ! dimensions ( without cable ): 120 x 95 x 65 mm

Metering pump, chemical pump PROMINENT gamma/4-W GAMMA/4-W 0216 PP 900585981 Dosing capacity: 16,0 l/h 2 bar power consumption: 0.012 kW ( 12 Watt ) 210 - 250 V 1AC 50 / 60 Hz approx. 9 m connection cable used, tested ! Dimensions ( without cable ): 215 x 90 x 230 mm

Selling a Fillog dosing machine in very good condition: Hourly capacity 150 kg Ideal for fruit puree Performance: 200-600 bottles/h Nominal performance: 300 L/H Electric demands: 0.1 kW, 24 V Material: WNr. 1.4301, AISI 304 stainless steel. food industrial PP Dimensions: 350x1100x1250 mm Weight: 40 Connections: DN 65 IP6S certified electronics Filling type: Volumetric Filling accuracy: + - 0.5% Filling temperaturg: 0-100°C Filling range: 5g-35.000g

Dosing nozzle, mixing nozzle DOPAG 401.05.75A 12511 401.05.65 11055 directional control valve: BOSCH 0820022990 24 V DC Suitable hose package S1450 ! New ! Dimensions: 300 x 130 x 1100 mm

Dosing conveyor belt Kleemann Brand: Kleemann A.A length = 6500 mm. Belt width: 950 mm. Propulsion: 7.5 kW planar reducer.

Used Rheinhardt Technik Conti Flow Vario 2K for bonding and sealing dosing system !

The fully-automated carbonisation plant produces the CO2-amount of beer, beer mixing beverages, soft drinks, mineral water and wine in a continuous and high-precision way by precise controlled dosing of CO2., Capacity beer feed: 200 hl/h, Capacity degassed water: 100 hl/h, Capacity blended beer: 300 hl/h , CO2-supply: 8 barg, Power: 23 kW, Current: 50 A, Voltage: 400 V, Frequency: 50 Hz, Compressed air: 6 bar, Length: 2790 mm, Width: 1250 mm, Height: 2440 mm, Weight: 500 kg, Operation / Control: fully automatic, electrical cabinet with control panel, Material: stainless steel, Features: Flange connection: Beer: DN80, degassed water: DN40, CO2: DN25, blended beer: DN65 Beer pump; carbonisation section; flow measurement; Anton Paar original wort, alcohol and CO2 measurement; pressure gauge; sampling taps; various other valves

Dosing Conveyor Belt Ammann Brand: Ammann A.A length = 1200 mm. Belt width: 650 mm. Drive: 2.2 kW slip-on gearbox Speed approx. 0.8 m/sec In stock: 6 pieces.

Used dosing unit CANOL, type: P10-E -in bakery condition- 2 pieces available - Built in 1998 and 2000 - Condition: Bakery condition, ready for immediate use - Number of nozzles: 1 piece -El. Connection: 400 V, 50 Hz, 037 kW Viewing and test run are possible by arrangement.

Description: HIGH-PRESSURE FOAMING MACHINE CANNON A-COMPACT 200 FC Possible discharge rate up to 2,600 g/s at a mixing ratio of 1 : 1 (polyol: isocyanate) Tank group Component tank, volume 250 litres Agitator on the polyol tank One mixing head type Cannon FPL 24 HP Hydraulic unit, volume 75 litres with heat exchanger Hose line polyol, isocyanate, hydraulics up to interface A  ,Motors with frequency inverter Dosing unit with two Cannon axial piston pumps, 55 cm3/rev Magnetic coupling on the isocyanate pump Touch screen control panel SIEMENS TP 177 6' SIEMENS S7 control system CHILLER ,FRIGOSYSTEM RACA/C 30 Capacity 2000 l/h Dimensions 800x600x1200 mm Approx. Onsite Dimension. (l x w x h): 3,000 x 2,000 x 2,000 mm, weight approx.: 3,000 kg

Description: HIGH-PRESSURE FOAMING MACHINE CANNON A-COMPACT 200 FC Possible discharge rate up to 2,600 g/s at a mixing ratio of 1 : 1 (polyol: isocyanate) Tank group Component tank, volume 250 litres Agitator on the polyol tank One mixing head type Cannon FPL 24 HP Hydraulic unit, volume 75 litres with heat exchanger Hose line polyol, isocyanate, hydraulics up to interface A  ,Motors with frequency inverter Dosing unit with two Cannon axial piston pumps, 55 cm3/rev Magnetic coupling on the isocyanate pump Touch screen control panel SIEMENS TP 177 6' SIEMENS S7 control system CHILLER ,FRIGOSYSTEM RACA/C 30 Capacity 2000 l/h Dimensions 800x600x1200 mm Approx. Onsite Dimension. (l x w x h): 3,000 x 2,000 x 2,000 mm, weight approx.: 3,000 kg

Water mixing / dosing unit Werner &, Pfleiderer WMD 152Product descriptionManufacturer: Werner &, PfleidererType: WMD 152Condition: used, functional, baker conditionfor water volume and temperature control unitCurrent type: 1/N / 50 HzNominal voltage: 230 VNenn operating current: 0.5 ADedetails see pictures

Manufacturer : Lewa Model: ecodos 750 P1 Year : 1998 Type : low pressure diaphragm metering / dosing pump   Max capacity : 750 L / H Operating pressure : 5 bars Min / max stroke : 10/0 mm Speed : 113 rpm   Application: sanitary/hygienic for the pharmaceutical, chemical, cosmetics and food industries. Classification: Atex (EEx) Variable speed drive Special acid coating: Stainless steel / PVC-H

Dosing Machine Jufeba FS-1 Year of construction: 2002 Neue stainless steel cover Neues filling block, PVC Hopper capacity 3,5l Filling volume each stroke 5 to 30 g Dimensions (WxLxH): 38 x 71 x 40 Pneumatic version, required compressed air: 6 bar

Dosing Machine Unifiller Universal 1000i Year of construction: 2014 Speed and portion control Stainless steel construction Easy product change Up to 120 cycles per minute depending on dispensing volume Servings from 9ml to 1064ml Hopper size: 52 l Even portioning of soft pieces possible

Cat. No. 13-0033 in a very good condition Typ: RF32DT71D4 Testing water by 22°C back pressure at 1 bar Pressure: 0,3 bar capacity: 5.100 litres/h Motor: 0,37 kW Connection: DN 40 - can be changed on request for an additional charge Measurements: with frame: pump: length: 33 cm 45 cm width: 20 cm 23 cm height: 84 cm 50 cm weight: 56 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Piston pump with drive 0.25 kW / 1.325 RPM, stroke length: 1 - 15 mm, stroke frequency: up to 110 rpm.

Piston pump with 0,25 kW / 1.325 UPM drive, stroke length: 1 - 15 mm, stroke frequemcy: up to 110/min.

Type: ZSA 1500 Working width: 1500 mm Flight circle metering drum: Ø 1600 mm Motor power: 18,5 kW Length metering device: 7800 mm Width metering device: 1600 mm Volume metering device: approx. 25 m ³

Electro-mechanical scale for liquids, with Hottinger load cell, pressure control valve, pneumatic outlet valve and solenoid valve. In support frame with feet.

Electro-mechanical scale for fluids, with Hottinger load cell, pressure valve, pneumatically operated slide valve and magnet valve. In base frame / stand.

Carbon black weighing scale 400l Description attached!

see pdf attached

Manufacturer: BARTEC Type: 250 year: 2004

see pdf attached

Piston metering pump, A 125N-38/116-19 DI Doseuro, used - overhauled Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Used and overhauled! The part was bought from a spare parts store of a company, was overhauled by a specialised company and is in a very good condition and fully functional. Technical data: - Manufacturer: Matricola / Doseuro - 1.660L/h, 100l/h, 9 bar, 0,18KW, - Material pump: stainless steel - 35 x 18 x 38cm high, 9kg, Function guarantee! For second hand parts, we can not accept any conventional guarantee and warranty. But we give you a functional guarantee. If the device does not work within 3 months after purchase you can return the goods and we will refund the purchase pr ...

Pieces of dough: 10-300 gr. Power: 10-60 pieces/ min digital control Stainless steel cladding rollable on rolls

Size: 0300, outlet opening (300x300) mm, Operating overpressure 0.8 bar, Operating temperature: 120°C