We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,383 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Filling machine,stailess steel,Trepko type 620,piston dosing 0-620 ml.
used
Filling machine,stainless steel,OBRUT,0-540 ml,piston dosing,product hopper.
used
Filling machine,stainless steel,LKF type 100,air driven piston dosing,0-1l dosage/stroke.
used
Fully refurbished Hosokawa Alpine UPZ 160 Pharma used system by Alpine Originals. The Hosokawa Alpine Ultraplex UPZ is a universal fine impact mill. It is used to grind soft dry materials. This micronizer is perfect to pulverize different coarse products down to a finer powder and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, cosmetics, recycling, etc. This grinder can be used for the pre-cut of different materials. It is able to process coarse products up to approx. 3 Mohs´ hardness by reaching medium to fine particles with end-product fineness values between d97 150 to 850 microns (µm) top size (product dependent) at the lowest possible energy consumption. The turbo mill can reach this wide final product range thanks to a variety of easily interchangeable grinding tools such as pin disc, plate beater, beater disc or p ...
used
for mechanical grape harvesting and manual grape harvesting - Machine capacity: 40 - 70 to/h - Last harvest processed: 2023! - Line in very good condition! Line 1 consisting of: 1 acceptance funnel 1 Armbruster destemmer with 40 - 70 to/h 1 weighing hopper, capacity: 3.5 tons 4 pumps with hopper, approx. 12.5 m3 capacity Grapes Dosing Receiving Hopper ARMBRUSTER - Year of construction 2004 - Capacity: approx. 3300 l - Material: Stainless steel DIN 1.4301 / AISI 304 - Dimensions: 2600 x 1600 x 1250 mm - Screw conveyor: DN 400 - Motor: 4 kW, 400 V / 50 Hz - With flat gate valve in stainless steel DN 400 - Proximity holder for step-by-step opening of the slide valve Destemming machine ARMBRUSTER AWFS 30 - 60 - Year of construction: 2004 - Effective capacity 40-70to/h - With frequency converter - With large squeezing rollers - With pre-juicing diverter - Worki ...
used
for mechanical grape harvesting and manual grape harvesting - Machine capacity: 40 - 70 to/h - Last harvest processed: 2023! - Line in very good condition! Line 2 consisting of: 1 acceptance funnel 1 Armbruster destemmer 40 - 70 to/h 1 weighing hopper, capacity: 3.5 tons 4 pumps with hopper, approx. 8 m3 capacity Grapes Dosing Receiving Hopper ARMBRUSTER - Year of construction 2001 - Capacity: approx. 3500 l - Material: Stainless steel DIN 1.4301 / AISI 304 - Dimensions: 2950 x 1660 x 1000 mm - Screw conveyor: DN 400 - Motor: 4 kW, 400 V / 50 Hz - With flat gate valve in stainless steel DN 400 - Proximity holder for step-by-step opening of the slide valve Destemming machine ARMBRUSTER AWFS 30 - 60 - Year of construction: 2001 - Effective capacity 40-70to/h - With frequency converter - With large squeezing rollers - With pre-juicing diverter - Working princ ...
used
Filling machine,stainless steel,Trepko type 620,piston dosing,0-1500 ml/stroke.
used
Filling machine,stainless steel,H&F type RTHF,0-1 l. piston dosing.
used
Fillingmaschine,stainless steel,Packmaster type DC 300,piston dosing 0-75 ml.
used
Fillingmachine,stainless steel,LKF type 101. Airdriven piston dosing 0-1 litre dosage/stroke.
used
Fully refurbished Hosokawa Alpine AFG 140 used system by Alpine Originals. The Hosokawa Alpine AFG fluidized bed opposed classifier jet mill is perfect for the super fine grinding of different dry materials with a precise control over the particle´s top cut thanks to its integrated classifier wheel design, using the Hosokawa Alpine Turboplex classifier head ATP. This micronizer can be used to pulverize different coarse products to finer powders and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, cosmetic, etc. This grinder is able to process hard coarse products up to approx. 10 Mohs´ hardness without much wear and reaching an extremely high end-product fineness values between d97 4 to 100 microns top size (product dependent) at the lowest possible energy consumption. The comminution takes place in the bottom part of the ...
used
Fully refurbished Hosokawa Alpine AFG 140 used system by Alpine Originals. The Hosokawa Alpine AFG fluidized bed opposed classifier jet mill is perfect for the super fine grinding of different dry materials with a precise control over the particle´s top cut thanks to its integrated classifier wheel design, using the Hosokawa Alpine Turboplex classifier head ATP. This micronizer can be used to pulverize different coarse products to finer powders and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, cosmetic, etc. This grinder is able to process hard coarse products up to approx. 10 Mohs´ hardness without much wear and reaching an extremely high end-product fineness values between d97 4 to 100 microns top size (product dependent) at the lowest possible energy consumption. The comminution takes place in the bottom part of the ...
used
Screw diameter 220 mm Processed material PET Flakes Drive Motor Siemens 225 kW + Simovert 6SE7 + Transmission Koellmann Unex70 Hydraulic drive dosing, hydraulic agregat Rexrorth
Filling machine,stainless steel,LKF type 100,air driven piston dosing,0-1l dosage/stroke.
used
Filling machine,stainless steel,LKF type 100,air driven piston dosing,0-1l dosage/stroke.
used
Filling machine,stainless steel,Alwid Universal D.,4 fillingnozzles,piston dosing.
used
Fillingmaschine,stainless steel,Packmaster type DC 300,piston dosing o-300 ml.
used
Used Alfa Laval decanter centrifuge model Aldec 40. New: 2007. The set includes: - decanter centrifuge - Ultromat dosing station - polymer pump - Netzsch sludge pump - centrifuge control cabinet - control cabinet of the compaction installation Technical parameters of the centrifuge: - maximum cake density 1.2 kg/dm3 - temperature 0-100 degrees C - maximum speed 4000 rpm - 2-stage planetary gear - gear max torque 2.5 kNm Gear ratio 1:159 - drum length 1460 mm - drum diameter 353 mm - cover/cover material AISI 316 - inner surface of the AISI 316 cover Centrifuge dismantled. All devices were technically efficient and in operation until dismantling.
used
Filling machine,stainless steel,Packmaster DC 300,0-75 ml. piston dosing.
used
Filling machine,stainless steel,Recomatic,SSP dosing pump with rubber lobes,air driven.
used
Filling machine,stainless steel,Trepco 0-200 ml piston dosing
used
A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Rental Multiprocess System in wear protected design. Stand-alone lab scale grinding and classifying plant. This compact plug-and-play system is perfect for Research and Development (R&D) and small-scale productions. It operates in small batches of a few kilos. The system can be fitted with different modules (one at a time) to either grind or classify different products, both coars ...
used
For sale is a whole heating system installed in the container, all ready with custom-made chimney. Technical inspection was carried out by Dekra. The heater has only 16 hours of operation behind it, so it's almost like new. Incl. Weihaupt light oil burner, incl. heating oil tank, 5t incl. fireplace system, incl. mixed cooler, incl. condensate management for steam generators up to 1bar, incl. Additional equipment: condensate tank, incl. pipe separator + backwash protection filter + Single water softener VAD 25, incl. Dosing station and accessories, incl. Insulated sheet steel container Can be visited in Mölln. Technical data can be found in the pictures. Sale only to self-collectors, if you have any questions, please contact us.
used
Filling machine,stainless steel,LS,0-2 l piston dosing
used
Filling machine,stainless steel,LS,0-500 ml piston dosing
used
Bag filling machine,stainless steel,Joachim Huisgen,VSM-2VA,piston dosing 0-360 ml.
used
Filling machine,stainless steel,Hamba,piston dosing 0-350 ml.
used
Filling machine,stainless steel,Trepco 0-750 ml dosing
used
Description movements with brushless motors: closing - mold height movement - dosing the others are plumbers installed languages ââItalian English German
used
Description Single layer blown film line Extruder diameter 105 L/D 30 Extrusion head with die 500 Dosing units DS&M Still haul off Twin winder working width 2200
used
Filling machine,stainless steel,G+W,hydraulic piston dosing,0-0,99 l/stroke
used
Capacity: 12,000 ltr. / h Year of manufacturing: 1993 complete stainless steel machine with Bran + Lübbe dosing pump
used
Piston dosing filler for cold and hot products (e.g. syrup, jam, chutney,...) Filling volume 50-1000ml
used
for 160 kg of dough; Control via control cabinet; with ground discharge; Can be connected to dosing or silo system; 2 speeds
used
clamping force: 450 kN injection volume: 99 cm³ screw diameter: 30 mm platen size: 860 x 320 mm closing stroke: 406 mm Condition: used, Specification: C-Frame Injection Moulding Machine - second-hand Serial No.: 45083 Clamping unit: - Clamping force: 450 kN - Opening travel: 406 mm - Heating plate size: 860 x 320 mm - Mould height min.: 264 mm - Max. plate spacing: 464 mm - Ejector stroke: 20 mm - Ejector force: 20 kN Injection unit: - Screw diameter: 30 mm - Screw length L/D: 17 - Dosing stroke: 140 mm - Stroke volume max.: 99 cm³ - Max. spray weight: 114 g - Screw speed: 20 - 300 rpm - Injection flow: 106 cm³/s - Injection flow increased: 71 cm³/s - Special injection pressure: 1450 bar - Spec. injection pressure increased: 2210 bar - Nozzle path: 200 mm - Operating hours: 54716 h - Pump drive ...
used
x-travel: 3000 mm y-travel: 4000 mm z-travel: 640 mm Control: Siemens Sinumerik 840D table-size: 3000 x 4000 mm swivelling +/-: 57 Grad traversing speed: x-axis: 20000 mm/min y-axis: 20000 mm/min z-axis: 12000 mm/min positioning accuracy: +/-0,1 mm/m repeating accuracy: +/-0,025 mm total power requirement: 15 kW weight of the machine ca.: 4 t equipped with: - CNC Siemens control Sinumerik 840D,Handwheel and Siemens SIMATIC S7-300 and SIMODRIVE 611, 1GB HHD Drive - Machine works with 2D cutting head - High pressure translator pump model 20 XD -55 (415Mpa, 75KW) - Paser 3 abrasive blast cutting system - Water softening dosing system - height sensor and collision monitoring for the 2D head, - Pneumatic tool clamping New X-axis spindles in 2017 New table support system 2017, Abrasive desludging system & new grease lubrication system 2017 Operating hours approx. 16700h dismantled and stored ...
used
clamping force: 450 kN injection volume: 99 cm³ screw diameter: 30 mm platen size: 860 x 320 mm closing stroke: 406 mm Condition: used, Specification: C-Frame Injection Moulding Machine - second-hand Serial No.: 45083 Clamping unit: - Clamping force: 450 kN - Opening travel: 406 mm - Heating plate size: 860 x 320 mm - Mould height min.: 264 mm - Max. plate spacing: 464 mm - Ejector stroke: 20 mm - Ejector force: 20 kN Injection unit: - Screw diameter: 30 mm - Screw length L/D: 16 - Dosing stroke: 140 mm - Stroke volume max.: 99 cm³ - Max. spray weight: 114 g - Screw speed: 20 - 300 rpm - Injection flow: 106 cm³/s - Injection flow increased: 71 cm³/s - Special injection pressure: 1451 bar - Spec. injection pressure increased: 2205 bar - Nozzle path: 530 mm - Operating hours: 54716 h - Pump drive ...
used
13 Kw, equipped with 2 cooking tubs of 12 Ltr capacity, 1 core temperature sensor per tank, Socket, Integrated hand shower with recall mechanism and infinitely variable jet dosing, Automatic water filling "VarioDose", TFT display, Central thumbwheel, Digital temperature display, Digital timer 0-24 hours with continuous settings, VarioBoost heating system
used
Wire diameter: 16mm, number of stations: 5, length: 6700mm, width: 3800mm, height: 3050mm, including sound-proof cabin, straightener, chain hoist, sorting trough, dosing machine, oil mist separator and additional accessories.
used
Completely refurbished bagging scale unit with new electronic control Systec IT 8000 Application range from 5 to 30 kg for open Bags Storage container (ø 1.45 m x approx. 3 m) 2-speed dosing screw with new bearings Bagging spout ø 210
used
WOLFKING 850 LIT ID.NO. 2138 Wolfking 850 liter double-axle paddle mixer with program control and water dosing nozzle double discharge hatches different speeds. Brand new engines! Dimensions 220 x 170 cm H 240 cm H to edge 180 cm.
used
Max. clamping force: 350kN, screw diameter: 30mm, max. dosing volume: 70cm³, with documentation.
used
Closing force: 500kN, heating output: 4.9kW, connected load: 19.9kW, operational hours counter: 57,024h, with handling and conveyor belts, without dosing device.
used
Thermo-Combinator Crystallizer Schab Heat Exchanger / Cooler with scraped surface used Manufacturer: Schröder&Co Type: UTK 18/200-DH2A Stainless steel The system was used to heat, maintain temperature and cool ketchup. Hourly output approx. 1800 - 2000 kg 1 dosing pump with two pump heads for water/spice paste and tomato paste Capacity tomato paste 0-868 l/h Total dimensions approx. 3.5 x 1 x 1.5 m. Original price was approx. 270,000 DM The plant comes from a plant where canned food was produced. Changes and errors in the technical data and information excepted.
used
Screw diameter: 59mm, screw rotational speed: 25-250/min, with complete documentation, control cabinet, screen changer, side dosing unit, granulator and additional accessories.
new
Dishwasher / dishwasher Model: D 500 Stainless steel Universal dishwasher 3/5 min rinsing time 1 disc basket, 1 universal basket 500 x 500 and cutlery insert Capacity: 12 baskets/hour with drain pump Detergent and rinse aid dosing unit Connection 230V, 2.58kW, Schucko plug Dimensions: 550 x 605 x 830 - 860mm, WxDxH NEW Machine with warranty
used
Output: 140-180kg/h, screw diameter: 50-103mm, screw length: 1300mm, max. screw rotational speed: 43/min, connected load: 25kW, operational hours counter: 62,590h, including dosing unit with hopper, vacuum pump, cylinder cooling aggregate and screw temperature control.
used
PET films were produced on the extruder, working width: 650-800mm, output: 600-700kg/h, with cooling spirals, new extruder screw, degassing system, other spare parts and documentation, without dosing system, an on-site inspection is possible.
used
Was used for filling and packing flour and sugar, format: 1000g, max. output: 90/ min, with mandrel, main dosing unit, Glue Applicator NORDSON, check weigher and post doser.
used
Was used for filling and packing flour, format: 1000/ 2000g, backset: 105x65mm, max. output: 1/ 2kg packages: 60/ 50/ min, controls: ELAU MC4, with 3x servo main dosing unit, check weigher and servo post doser.