dosing mixing used for sale

Glue dosing station MAYER AND MAYER DXR R2020R L-P-PUB PDX20 40-100 P manufactured in 2015 in Germany by MAYER & MAYER HANDELS GMBH. The station was in use for about 3 months in the process. After this time, it was shut down, cleaned and properly secured. All gaskets in the station were replaced with new ones. It is a charging station for manual dispensing / application guns for two-component adhesives. The gun is included for free. Spare parts are offered for the station. Price of the parts to be individually agreed.

Rheon Cornucopia Type: KN200 Dough pieces: 10-300 gr. Capacity : 10-60 pieces/min digital control Stainless steel cladding rollable on wheels Height: 160cm Width: 80cm Depth: 150cm

with compressed air with lift to the top Stainless steel version medium sized funnels Manufacturer: Unknown

Dosing hoppers Manufacturer: HECKERT Type: Dosing bunker specifications: Sliding floor length: approx. 8,500 mm Sliding floor width: approx. 2,700 mm Sliding floor height: approx. 2,360 mm Side wall height: approx. 2,000 mm Capacity: approx. 40 m³ Drive power: to follow!

Glue melter, glue machine, hot glue machine, industrial hot glue gun, hot melt glue gun -Module for: hot glue system -Number: 4x available -Price: per piece -Dimensions: 100/30/H30 mm -Weight: 0.3 kg

Dosing pump, 2-component dosing pump -For dosing liquid media -Dosing rate: 1.4 l/h -Pressure: 10 bar - Electrical connection: 100-240 V 50/60 Hz -Weight: 3.6 kg

For trouble-free operation at high throughput rates of cable recycling systems, a constant and adapted feeding of cold cable material is crucial. So that an employee does not have to constantly check or carry out the material, the use of a dosage makes sense. With a volume of approx. 1.5 m³, this offers a sufficient stock to ensure the independent operation of a plant. The conveying speed is simply regulated by a handwheel on the gearbox and the layer height on the conveyor belt can be adjusted appropriately by a slider.

Filler, dosing computer terminal, dosing device, doser, compressed air vacuum control -Manufacturer: Hamatech, dosing device compressed air vacuum control -Type: unfortunately without type designation -Individual components: see photos -Dimensions: 330/245/H145mm -Weight: 4.8 kg

We sell here a portioner / screw conveyor from the manufacturer Meyn in a good used and functional condition. Runs on 400 volts, year of construction 2001, completely stainless steel, speed adjustable, rollable, for loading and portioning, 100 liter funnel, workshop tested, ready for immediate use, dimensions W/D/H 150/110/230 cm, others on request.

dosing pump, piston pump, diaphragm pump -Manufacturer: Preci-Pompe, dosing pump with stainless steel container -Type: PP 31 -Motor: VEM 0.55 kW -Individual components: see photos -Dimensions: 680/440/H620 mm -Total weight: 87 kg

Dosing pump, 2-component dosing pump -for dosing liquid media -2x dosing capacity 0-300 l/h -Pressure: 3 bar -Drive: 0.37 kW/57 rpm -Quantity: 1 piece available -Dimensions: 830/400/H340 mm -Weight: 125 kg

A water mixing and dosing device from the Scheurer company from 2022 will be offered. The device is used, but in very good condition. Technical data: Manufacturer: Johannes Scheurer GmbH Description: Water mixing and dosing device Series/ Model: CENTRALINA/ DOSAMIXA Year of Make: 2022 Volts: 230 Frequency: 50 The device is currently at our customer's site in Pasewalk and is being sold due to restructuring. Only the offered assets are expressly sold, any items that can be seen in the photos are expressly not part of the scope of the offer. We sell the assets on behalf of our customers. The offer prices are net prices in EURO ex works. Since these are used assets, we sell them without guarantee or warranty as well as the right to take back. The offers are subject to change, subject to errors and subject to any prior sale. Our terms and conditions also apply to every sale, ...

Device characteristics: Number of bars: 48 per minute. Hopper capacity: 7 litres. Weight: from 10 to 80 g ( depending on the stamp ). Dimensions ( L x W x H ): 500 x 400 x 650 mm. Total weight: 27 kg.

Auction-ID: A1-46614-56

Auction-ID: A1-47041-28

Dough filling and dosing machine Rheon KN 200 Cornucopia used Rheon KN 200 dough filling and dosing machine.The machine has been tested for function, can be viewed and tested in the warehouse in Bielefeld. We will be happy to send you further pictures and information on request. - Dough pieces: 10-300 gr. - Output : 10-60 pieces/min -digital control - Stainless steel cladding - rollable on wheels - used Rheon KN 200 for bakery confectionery

Dosing screw INOX Length: 200 cm Diameter: 150 cm Motor: 1.1 kW Revolutions: 25

Paint dosing system from Fluid Solution incl. software

Used Rheinhardt Technik Conti Flow Vario 2K for bonding and sealing dosing system !

ECOLAB filler outdoor cleaning system, but can also be used as a satellite station. As good as new, ready for immediate use

Pneumatic double piston dosing pump for pumping and mixing 2 media. 1 pneumatic cylinder with 2 pump heads. Required air pressure 8 bar. 1/2-inch connections with 4 stopcocks. Up to approx. 40 strokes per minute, or approx. 80 litres per minute / approx. 5 cbm per hour. On platform wagon ant with 2 swivel/brake castors and 2 fixed castors. Overall pump dimension: 6001300x1000mm, weight about 80kg.

Leonhardt AG2 Twin head dosing machine Serial: 1401449 2016, Industrial dosing machine, 150Kg stainless agitated hopper, dosing area 200 -750 ccm per cycle and pump position, 6Kw max output, with level sensor, siemens HMI controls, mobile, with manuals and drawings, 3Ph

Dosing bunker with chain belt discharge Manufacturer: HUBER Fördertechnik Type: RHKG160/8AA Year of Make: 2001 specifications: Machine dimensions: Length: 8,500 mm, Width: 2,400 mm, Height: 2,500 mm Center distance: approx. 8,000 mm Conveyor width: 1,600 mm Side wall height: approx. 1,550 mm Capacity: approx. 20 m³ Drive power: 0.75 kW for the conveyor belt Drive power: 4.0 kW for the dosing station

Allfill SHA15 Auger filler Refurbed in 2023, touch screen control, stainless, auger filler variable speed or continuous fill, 75Kg stainless hopper with 50mm stainless screw discharge, with level detection, with foot pedal, Previously used inline with elevator screw for filling the hopper, 3Ph

Paint dosing pump, chemical pump FEINPRÜF F16 20 92500036 shaft diameter: Ø 20 mm Flange diameter: Ø 57 mm New ! Dimensions: 122 x 80 x 142 mm

Chemical dosing station PAGUS plastic cabinet 710 x 800 x 1690 mm 2 Air diaphragm pump and various valves and sensors cabinet almost metal-free ! Dimensions: 750 x 950 x 2100 mm

Dosing pump with tank and mixer, chemical pump SERA M412S0 diaphragm pump max. 3 bar 0 - 500 l/h motor: 0.0.00 37 kW 220 / 415 V Mixer: TMR AMS 018/8 Motor: 0.18 kW 670 rpm 230 / 400 V Tank: 230 l stainless steel ! used ! Dimensions: 550 x 670 x 630 mm

Dosing machine Comas DPCI 600 - Year of construction 2004

Intergas dosing unit DSD 500, type A, foaming unit and gas dosing station At the moment we have an intergas dosing unit for sale. This was a part of a project. Therefore the machine was used only very limited. - Operating hours: well below 100h - Weight: approx. 500kg Find more here - /

Machine name: Polymer dosing system Manufacturer: Alltech Type: Polymat 1000 V7 KD S Year of Make: 2003 Content: 1000 liters Conveying / Dosing of: Powder-shaped # Chamber: 2 Control: Yes Drive motor: 1: 0.55 kW, 12 0.55 kW Version: Horizontal Dimensions: Length 2000 x Width 900 x Height 1900 mm Curb weight: 1000 kg Tech. Documentation: Yes Accessories: Dry material doser type T09K0007 Condition: Used Price: On request

Double Diaphragm Piston Pump

used side feeder for foil snippets / scrap Centrifuge with drive and feed container this unit was mounted on a 150 mm extruder Capacity over 320 kg/h

Vertical packaging machine with piston pump for dosing liquids. Especially for customized pouches with regular or irregular shapes such as round pouches, bottle-shaped pouches, etc. The sealing jaws are manufactured according to the specific bag layout. PLC controlled, operation via touch screen. - Specifications: bag sizes: pillow bags: 3-side or 4-side seal pouches: L(40-170)xW(20-110)mm | suitable film width: 220mm | suitable film: composite film, heat sealable | dosing range: 1-30ml | max. speed of the machine in neutral: 50 cycles/minute | power supply: 220V, 50Hz | power consumption: 2,8kW | air pressure: max. 0.6MPa | compressed air consumption: 2m?/h | dimensions: L930xW750xH1920mm | weight: 350kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available ...

Vertical packaging machine with auger dosing unit for powders. Especially for customized pouches with regular or irregular shapes such as round pouches, bottle-shaped pouches, etc. The sealing jaws are manufactured according to the specific bag layout. PLC controlled, operation via touch screen. - Specifications: bag sizes: pillow bags: 3-side or 4-side seal pouches: L(40-170)xW(20-110)mm | suitable film width: 220mm | suitable film: composite film, heat sealable | dosing range: 1-30g | max. speed of the machine in neutral: 50 cycles/minute | power supply: 220V, 50Hz | power consumption: 2,8kW | air pressure: max. 0.6MPa | compressed air consumption: 2m?/h | dimensions: L930xW750xH1920mm | weight: 350kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available i ...

Vertical packaging machine with piston pump for dosing liquids. Equipped with a punching module for sealing corners (cross sealing) with a rounded shape. The following bag types can be configured: pillow bags, 3-side sealed bags or 4-side sealed bags (surcharge). PLC controlled, touch screen operation, pneumatically driven cross-sealing. - Specifications: bag sizes: pillow bags: L(40-160)xW(20-100)mm, 3-side or 4-side seal pouches: L(40-160)xW(20-100)mm | suitable film width: 240mm | suitable film: composite film, heat sealable | dosing range: 1-50ml | max. speed of the machine in neutral: 60 cycles/minute | power supply: 220V, 50Hz | power consumption: 2kW | air pressure: max. 0.6MPa | compressed air consumption: 2m?/h | dimensions: L900xW700xH1850mm | weight: 250kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packa ...

Vertical packaging machine with volumetric cup filler for granules. Especially for customized pouches with regular or irregular shapes such as round pouches, bottle-shaped pouches, etc. The sealing jaws are manufactured according to the specific bag layout. PLC controlled, operation via touch screen. - Specifications: bag sizes: pillow bags: 3-side or 4-side seal pouches: L(40-170)xW(20-110)mm | suitable film width: 220mm | suitable film: composite film, heat sealable | dosing range: 1-30g | max. speed of the machine in neutral: 50 cycles/minute | power supply: 220V, 50Hz | power consumption: 2,8kW | air pressure: max. 0.6MPa | compressed air consumption: 2m?/h | dimensions: L930xW750xH1920mm | weight: 350kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are availa ...

Vertical packaging machine with auger dosing unit for powders. Equipped with a punching module for sealing corners (cross sealing) with a rounded shape. The following bag types can be configured: pillow bags, 3-side sealed bags or 4-side sealed bags (surcharge). PLC controlled, touch screen operation, pneumatically driven cross-sealing. - Specifications: bag sizes: pillow bags: L(40-160)xW(20-100)mm, 3-side or 4-side seal pouches: L(40-160)xW(20-100)mm | suitable film width: 240mm | suitable film: composite film, heat sealable | dosing range: 1-50g | max. speed of the machine in neutral: 60 cycles/minute | power supply: 220V, 50Hz | power consumption: 2kW | air pressure: max. 0.6MPa | compressed air consumption: 2m?/h | dimensions: L800xW960xH2050mm | weight: 300kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packagi ...

Vertical packaging machine with volumetric cup filler for granules. Equipped with a punching module for sealing corners (cross sealing) with a rounded shape. The following bag types can be configured: pillow bags, 3-side sealed bags or 4-side sealed bags (surcharge). PLC controlled, touch screen operation, pneumatically driven cross-sealing. - Specifications: bag sizes: pillow bags: L(40-160)xW(20-100)mm, 3-side or 4-side seal pouches: L(40-160)xW(20-100)mm | suitable film width: 240mm | suitable film: composite film, heat sealable | dosing range: 1-50g | max. speed of the machine in neutral: 60 cycles/minute | power supply: 220V, 50Hz | power consumption: 2kW | air pressure: max. 0.6MPa | compressed air consumption: 2m?/h | dimensions: L800xW960xH1900mm | weight: 300kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your pa ...

Vertical packaging machine as a high-speed version with piston pump for dosing liquids. The following bag types can be configured: pillow bags, 3-side sealed bags or 4-side sealed bags (surcharge). PLC controlled, touch screen operation, cross sealing driven by servomotors. - Specifications: bag sizes: pillow bags: L(20-145)xW(20-110)mm, 3-side or 4-side seal pouches: L(20-145)xW(30-120)mm | suitable film width: 240mm | suitable film: composite film, heat sealable (monofilm on request) | dosing range: 1-50g | max. speed of the machine in neutral: 150 cycles/minute | power supply: 220V, 50Hz | power consumption: 5kW | air pressure: max. 0.6MPa | dimensions: L900xW700xH170mm | weight: 300kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from ...

Vertical packaging machine as high-speed version with auger dosing unit for powder. The following bag types can be configured: pillow bags, 3-side sealed bags or 4-side sealed bags (surcharge). PLC controlled, touch screen operation, cross sealing driven by servomotors. - Specifications: bag sizes: pillow bags: L(20-145)xW(20-110)mm, 3-side or 4-side seal pouches: L(20-145)xW(30-120)mm | suitable film width: 240mm | suitable film: composite film, heat sealable (monofilm on request) | dosing range: 1-50g | max. speed of the machine in neutral: 150 cycles/minute | power supply: 220V, 50Hz | power consumption: 5kW | air pressure: max. 0.6MPa | dimensions: L900xW700xH170mm | weight: 280kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from sto ...

Vertical packaging machine as high-speed version with volumetric dosing unit for granulates. The following bag types can be configured: pillow bags, 3-side sealed bags or 4-side sealed bags (surcharge). PLC controlled, touch screen operation, cross sealing driven by servomotors. - Specifications: bag sizes: pillow bags: L(20-145)xW(20-110)mm, 3-side or 4-side seal pouches: L(20-145)xW(30-120)mm | suitable film width: 240mm | suitable film: composite film, heat sealable (monofilm on request) | dosing range: 1-50g | max. speed of the machine in neutral: 120 cycles/minute | power supply: 220V, 50Hz | power consumption: 5kW | air pressure: max. 0.6MPa | dimensions: L900xW700xH170mm | weight: 300kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately ...